Engineering Commons^™

14-08 Big Data Analytics To Aid Developing Livable Communities, Li Yang, Hyunkeun Cho, Jun-Seok Oh

Transportation Research Center Reports

In transportation, ubiquitous deployment of low-cost sensors combined with powerful computer hardware and high-speed network makes big data available. USDOT defines big data research in transportation as a number of advanced techniques applied to the capture, management and analysis of very large and diverse volumes of data. Data in transportation are usually well organized into tables and are characterized by relatively low dimensionality and yet huge numbers of records. Therefore, big data research in transportation has unique challenges on how to effectively process huge amounts of data records and data streams. The purpose of this study is to conduct research …

Comparison Of Novel Carboneous Structures To Treat Nitroaromatic Impacted Water, Benjamin M. Doane

Theses and Dissertations

Carboneous materials such as carbon nanotube (CNT), granular activated carbon (GAC), and biochar are promising materials for the removal of organic contaminants from aqueous phase solutions. CNTs have astonishing mechanical strength, chemical and thermal stability and high surface area. While biochar, similar to GAC, having an extremely porous structure and high surface area, can be produced in more austere conditions with native materials. In this study, novel CNT-Hybrid structures (CNT-HS), hardwood pellet (HWP) Biochar and standard GAC (F-600 GAC) were used as adsorbents to treat water contaminated by a model nitroaromatic compound, 2,4-dinitrotoluene (DNT).

An Assessment Of The Accuracy Of The Euler-Bernoulli Beam Theory For Calculating Strain And Deflection In Composite Sandwich Beams, Qhinhon D. Ho

University of New Orleans Theses and Dissertations

This study focuses on assessing the accuracy of the Euler-Bernoulli beam theory as computational bases to calculate strain and deflection of composite sandwich beam subjected to three-point and four-point bending. Two groups of composite sandwich beams tests results will be used for comparison purposes. Mechanical properties for the laminated skin are provided by researchers from University of Mississippi (Ellen Lackey et al., 2000). Mechanical properties for the balsa wood core are provided by Alcan Baltek Corporation. Appropriate material properties and test geometries are then used in the Euler-Bernoulli-based algorithm in order to generate analytical data for comparison to experimental data …

A Simulation Of The Mississippi River Salt Wedge Estuary Using A Three-Dimensional Cartesian Z Coordinate Model, Steven K. Ayres

University of New Orleans Theses and Dissertations

The stratified flow of the lower Mississippi River due to density gradients is a well documented phenomenon. This stratification of fresh and saline water manifests itself as a heavier wedge of saline water that extends upriver and a buoyant fresh water plume extending into the Gulf of Mexico past the Southwest Pass jetties. The maximum absolute distance of saltwater intrusion observed anywhere in the world occurred on the Mississippi River in 1939 and 1940 when saltwater was observed approximately 225 km upstream from the mouth of Southwest Pass. The U. S. Army Corps of Engineers now prevents the wedge from …

Field Study Of Electrochemical Disinfection Of Municipal Wastewater, Luis De Grau Vidal

University of New Orleans Theses and Dissertations

Research on electrochemical disinfection of municipal wastewater has been conducted at the University of New Orleans using a continuous flow electrochemical reactor connected to a direct current (DC) power supply changing its polarity and varying the electrode distance. Bacterial inactivation and chlorine production were the main parameters that were recorded.

After months of research, it was determined that the electrochemical disinfection reactor is efficient and has a great potential for the future. There is no need to use chlorine and it has low operation costs.

The following design recommendations for an electrochemical disinfection unit were given:

• A detention time of …

Evaluation Of Viirs Land Surface Temperature Using Crest-Safe Air, Snow Surface, And Soil Temperature Data, Carlos L. Pérez Díaz, Tarendra Lakhankar, Peter Romanov, Reza Khanbilvardi, Yunyue Yu

Publications and Research

In this study, the Visible Infrared Imager Radiometer Suite (VIIRS) Land Surface Temperature (LST) Environmental Data Record (EDR) was evaluated against snow surface (T-skin) and near-surface air temperature (T-air) ground observations recorded at the Cooperative Remote Sensing Science and Technology Center—Snow Analysis and Field Experiment (CREST-SAFE), located in Caribou, ME, USA during the winters of 2013 and 2014. The satellite LST corroboration of snow-covered areas is imperative because high-latitude regions are often physically inaccessible and there is a need to complement the data from the existing meteorological station networks. T-skin is not a standard meteorological parameter commonly observed at synoptic …

Multi-Criteria Evaluation Of Cmip5 Gcms For Climate Change Impact Analysis, Ali Ahmadalipour, Arun Rana, Hamid Moradkhani, Ashish Sharma

Civil and Environmental Engineering Faculty Publications and Presentations

Climate change is expected to have severe impacts on global hydrological cycle along with food-water-energy nexus. Currently, there are many climate models used in predicting important climatic variables. Though there have been advances in the field, there are still many problems to be resolved related to reliability, uncertainty, and computing needs, among many others. In the present work, we have analyzed performance of 20 different global climate models (GCMs) from Climate Model Intercomparison Project Phase 5 (CMIP5) dataset over the Columbia River Basin (CRB) in the Pacific Northwest USA. We demonstrate a statistical multicriteria approach, using univariate and multivariate techniques, …

Experimental Study Of Longitudinal Sorting Of Particles Differing In Size And Density, Nabila Mahjabeen

Theses and Dissertations

Transport, deposition and erosion of sediment particles differing in size, shape and density may result in particle segregation, which in geosciences applications is generally referred to as sediment sorting. A thorough understanding of sediment sorting processes is important to describe and model a wide variety of natural processes such as the decrease in particle size and/or density in a fluvial system (downstream fining and/or lightening), the formation of economic placers, concentration of heavy minerals, chemical and metal pollutants etc. Sorting of sediment grains associated with sediment transport in the streamwise direction results in the development of longitudinal sorting patterns. Vertical …

Confluence Of Density Currents Over An Erodible Bed, Hassan Ismail

Theses and Dissertations

Results from laboratory experiments on conservative density current confluence are reported. Hydraulic characteristics and morphodynamic consequences of the confluence of two continuous release density currents in a horizontal, 45 degree asymmetrical junction are examined and compared to those of terrestrial river junctions. It was observed that density current confluence is markedly different than those in river junctions primarily due to the ease of the dense fluid to convect into the ambient fluid in the junction zone. Upward convection in the junction resulted in low horizontal velocity and shear stresses on the bed of the junction zone, followed by re-plunging to …

Numerical And Experimental Investigations Of Dam And Levee Failure, Ezzat Youssef Elhassan Mohamed Elalfy

Theses and Dissertations

Both numerical and experimental investigations are conducted to study the failure of earthen dams and levees. Boussinesq equations describing one-dimensional unsteady flow including non-hydrostatic pressure distribution are solved numerically along with Exner equation for the sediment mass conservation to include the effects of the streamline curvature on the failure of non-cohesive earthen embankments. In addition, the effects of the steep bottom slope on the flow variables during the failure are studied by solving the Saint- Venant equations modified for steep bed slope along with the Exner equation to simulate non-cohesive earthen embankment failure due to overtopping. The Boussinesq equations are …

Assessment Of Classifiers For Potential Voice-Enabled Transportation Apps, Md Majbah Uddin

Theses and Dissertations

Transportation apps are playing a positive role for today’s technology-driven users. They provide users with a convenient and flexible tool to access transportation data and services, as well as collect and manage data. In many of these apps, such as Google Maps, their operations rely on the effectiveness of the voice recognition system. For the existing and new apps to be truly effective, the built-in voice recognition system needs to be robust (i.e., being able to recognize words spoken in different pitch and tone). The goal of this study is to assess three post-processing classifiers (i.e., bag-of-sentences, support vector machine, …

Slope Stability Enhancement Of An Upstream Tailings Dam: Laboratory Testing And Numerical Modelling, Yazeed A. Alsharedah

Electronic Thesis and Dissertation Repository

Mine tailings are the byproduct of mining activities, which need to be disposed of once the ore is extracted. They can be disposed of in either dry or wet forms. The latter is most common with the tailings being disposed of in the form of slurry inside retention structures. The retention structure may be a natural, manmade, or built dam, which is the case in most of nowadays mining locations. In this thesis, improving the stability of an upstream tailings dam using soil additives is investigated. The experimental phase of this study involved laboratory tests conducted to characterize mine tailings …

Design And Construction Process Management, David Brown

David C. Brown

New approaches for improving design and construction processes have been used recently. Innovative methods for managing the requirements and quality of these processes will be discussed. A systematic data centric approach will be discussed as well as the processes of separating progress from performance. It discusses the integration of these processes in the planning, risk analysis, design, submission, construction, inspection, quality control and documentation phases.

Investigation Into The Properties Of A Cementitious Composite Material Reinforced With Short, Randomly Distributed, Nickel Titanium Fibers, David Brown

David C. Brown

No abstract provided.

Silver Nanoparticle Transport Through Soil: Illuminating The Governing Pore-Scale Processes, Ian L. Molnar

Electronic Thesis and Dissertation Repository

Engineered nanoparticles are widely used and will eventually be released to the subsurface environment and contaminate groundwater resources. However, the transport of engineered nanoparticles through soil is currently not well understood and cannot be modelled in any fundamental manner, placing groundwater resources at risk from nanoparticle contamination. This inability to accurately simulate transport is due to a lack of experimental information on nanoparticle interactions in the pore spaces of real soils.

This thesis illuminates the pore-scale processes governing silver nanoparticle transport through soil. In addition, it examines the influence of surface chemistry and grain/pore distributions on those processes. For the …

Smouldering Remediation: Transient Effects Of Front Propagation, Laura L. Kinsman

Electronic Thesis and Dissertation Repository

Remediation of sites contaminated with non-aqueous phase liquids (NAPLs) presents a significant challenge, particularly for complex and high molecular weight compounds such as coal tar and creosote. Self-sustaining Treatment for Active Remediation (STAR) is an innovative remediation technology based on the principles of smouldering combustion, which has shown potential for rapid destruction of source zone contaminants. The success of smouldering remediation has been previously demonstrated both at the laboratory and field scale, however, these studies have focused primarily on the overall degree of remediation. Laboratory column experiments were employed to identify key transient processes that have the potential to influence …

Investigation Of Hybrid Foundation System For Offshore Wind Turbine, Ahmed Mohamed Reda Abdelkader

Electronic Thesis and Dissertation Repository

Green energy resources are essential to meet the growing energy demands in the near future while reducing the effects of global warming. Offshore wind energy is one of the main efficient renewable energy sources which drive the ever increasing expansion of offshore wind farms globally. Wind energy technologies are improving making energy production more affordable, which helped Denmark, for example, to produce about 25% of its energy. One of the main challenges for offshore wind projects is the cost of foundation construction, which represents about 40% of the total cost. The investigated hybrid foundation system has the potential to reduce …

The Sustainability Generation: Why Young People Hold The Key To A Better Future, Leidy Klotz

Leidy E. Klotz

In a standard test of reasoning, you are given a candle, a box of thumbtacks, and a book of matches. Your task is to attach the candle to the wall so that it does not drip onto the table below. I thought about how to melt the wax and use it to stick the candle to the wall. What would you do? This challenge is designed to reveal functional fixedness, mental blocks against using objects in a new way. The experience that comes with age is a disadvantage here because it leads to thinking of the normal use of the …

A Lean Modeling Protocol For Evaluating Green Project Delivery, Leidy E. Klotz, Michael Horman, Mark Bodenschatz

Leidy E. Klotz

The first vital step to leaning an operation is to model or map the processes used to deliver value in that operation. This allows the requisite understanding of where waste and non value-adding activity exists, and provides the foundation for improvement. Current protocols for modeling operations present the basic tenets for lean mapping, but tend to be based in manufacturing language, and are not easily adapted to capital facilities projects. “Green” or “sustainable” capital projects delivered using current project delivery systems seem to be laden with hidden waste. These projects tend to be more challenging to deliver due increased levels …

Meeting Engineering Program Objectives Through Service Learning Opportunities In Developing Countries, Jeffrey M. Plumblee, Lansford Bell, Leidy E. Klotz

Leidy E. Klotz

The civil engineering profession, in an adaptive reaction to emerging roles for civil engineers, is recognizing the need for new engineers to possess a more robust skill set than just the typical design background. This paper describes the efforts of Clemson Engineers for Developing Countries (CEDC) to fulfill the more nontraditional and often unaddressed “learning outcomes” noted by ASCE’s Civil Engineering Body of Knowledge for the 21st Century as important prerequisites for licensure. The learning outcomes are addressed through ongoing international service learning projects in Cange, Haiti. The paper focuses on the following four outcomes and their fulfillment methods: leadership, …

Green Credits Versus Environmentally Sustainable Traffic Operations:A Comparison Of Contributions To Energy And Emissions Reductions, Yan Zhou, Lee Tupper, Mashrur Chowdhury, Leidy Klotz

Leidy E. Klotz

Although society is facing a variety of environmental issues, including the depletion of energy resources, and has a much greater awareness of climate change and its serious related social impacts, transportation systems have been pushed to increasingly greater limits because of the dramatic growth in traffic demand. A case study was performed to compare the contributions of green construction credits and those of environmentally sustainable traffic operations to reducing energy use and emissions. The study measured the impacts of green credits by using the Carnegie Mellon University economic input-output life-cycle assessment model. These impacts were compared with those achieved through …

Women As Sustainability Leaders In Engineering: Evidence From Industry And Academia In The U.S., Jennilee Harrison, Leidy Klotz

Leidy E. Klotz

Women are underrepresented in engineering education and practice, which limits the quality of the engineering workforce. One way to increase the participation of women in engineering is to emphasize subjects that appeal to them and require skills at which they are especially adept. A subject that may fit this description is sustainability. To examine whether the subject of sustainability may help increase the participation of women in engineering, the purpose of this research is to compare the percentage of women in selected sustainable engineering leadership positions with the percentage of women in general engineering leadership positions. Gender data were collected …

Site Development At The Corner Of Drake And Stadium, Ahmad Sear Rahimi

Honors Theses

This report presents the site layout alternatives for the development located at the corner of Drake and Stadium in Kalamazoo, Michigan. In the report four different layouts are suggested and followed by best management practices for grading and earthwork plans, porous asphalt pavement design, storm water retention design for the proposed site, and storm sewer pipe design. The redesign of the Costco Development Site aims to maximize efficiency of the development area through the warehouse and gas station location, parking lot layout, and trucking routes. Grading design is developed based on the existing site conditions before construction took place. The …

How Do Changes To The Railroad Causeway In Utah’S Great Salt Lake Affect Water And Salt Flow?, James S. White, Sarah E. Null, David G. Tarboton

Civil and Environmental Engineering Faculty Publications

Managing terminal lake elevation and salinity are emerging problems worldwide. We contribute to terminal lake management research by quantitatively assessing water and salt flow for Utah’s Great Salt Lake. In 1959, Union Pacific Railroad constructed a rock-filled causeway across the Great Salt Lake, separating the lake into a north and south arm. Flow between the two arms was limited to two 4.6 meter wide rectangular culverts installed during construction, an 88 meter opening (referred to locally as a breach) installed in 1984, and the semi porous material of the causeway. A salinity gradient developed between the two arms of the …

Development Of Semi-Circular Bending (Scb) Fracture Test For Bituminous Mixtures, Gabriel Nsengiyumva

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Granted that most distresses in asphalt (flexible) concrete (AC) pavements are directly related to fracture, it becomes clear that identifying and characterizing fracture properties of AC mixtures is a critical step towards a better pavement design. This thesis examines the testing variables of a reliable and practical semicircular bending (SCB) test for evaluating the fracture characteristics of asphalt concrete mixtures at intermediate service temperature conditions. The first part of this thesis investigates the repeatability of the SCB fracture test method by integrating a statistical-experimental approach to identify testing variables of the SCB test that result in repeatable test results. Toward …

Independency Of Elasticity On Residual Stress Of Room Temperature Rolled Stainless Steel 304 Plates For Structure Materials, Parikin Parikin, David Allen

Makara Journal of Technology

Mechanical strengths of materials are widely expected in general constructions of any building. These properties depend on its formation (cold/hot forming) during fabrication. This research was carried out on cold-rolled stainless steel (SS) 304 plates, which were deformed to 0, 34, 84, and 152% reduction in thickness. The tests were conducted using Vickers method. Ultra micro indentation system (UMIS) 2000 was used to determine the mechanical properties of the material, i.e.: hardness, modulus elasticity, and residual stresses. The microstructures showed lengthening outcropping due to stress corrosion cracking for all specimens. It was found that the tensile residual stress in a …

Effect Of Fly Ash Fortification In The Manufacture Process Of Making Concrete Towards Characteristics Of Concrete In Sulfuric Acid Solution, Asep Handaya Saputra, Muhammad Shohibi, Masatoshi Kubouchi

Makara Journal of Technology

Fly ash is a silica or alumino silica material that can be used as a constituent of cement in the concrete manufacturing process. Utilization of fly ash aims to improve durability and minimize the reduction of concrete’s compressive strength exposed to an acidic environment, which can be achieved through the pozzolanic reaction of fly ash with Ca(OH)2 within concrete. The reduced content of Ca(OH)2 through pozzolanic reaction will minimize the tendency of ettringite formation (compounds that cause deterioration and decrease the compressive strength of concrete). In order to determine the relation between fly ash replenishment into concrete with concrete’s characteristics …

Improvement Of Quality Of Carica Papaya L. With Clove Oil As Preservative In Edible Coating Technology, Eny Kusrini, Anwar Usman, Chrispine Deksita Wisakanti, Rita Arbianti, Dedy Alharis Nasution

Makara Journal of Technology

We have studied utilization of essential clove oil, extracted from clove buds by hydrodistillation, as preservative in edible packaging technology. Preservative of essential clove oil was applied on chopped papaya fruits by using two methods, namely spray and brush. The effects of concentration of clove oil from 0.05 to 0.20% on the preservation of papaya fruits (Carica papaya L.) at room temperature (25 °C) were also evaluated. Physicochemical and in vitro microbiological activities on the papaya fruits that were stored at 25 oC and 85-90% relative humidity were investigated in details. The results indicate that the clove oil at concentration …

Oxidation Process Of H 2 O /Uv For Cod Reduction Of Wastewater From Soybean Tofu Production, Komala Pontas, Abrar Muslim

Makara Journal of Technology

Chemical Oxygen Demand (COD) reduction of wastewater from soybean tofu production was studied by conducting advanced oxidation process (AOP) using hydrogen peroxide with UV radiation catalysts in a closed cylindrical glass reactor. The hydroxyl radical (*OH) concentration from H2O2 decomposition was modeled, and exponential trends were found for the *OH concentration over radiation time and operation temperature. As a result, it was found that the maximal *OH concentration was 0.209 mol L-1 at 240 minutes and 50 °C. The *OH concentration exponentially increased following rise in operation temperature. The H2O2/UV AOP application reduced COD concentration to approximately 42.41% from 10,545 …

College Of Engineering Senior Design Competition Fall 2015, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …