Engineering Commons^™

The Biological Activity Of Dual-Responsive Glycopolymers For Intracellular Codelivery Of Antigen And Lipophilic Adjuvant, Micaela Shields

Honors Theses

Subunit vaccines present themselves as an attractive alternative to traditional approaches to vaccines, which utilizes whole organisms to trigger an immune response. While these traditional approaches have proven themselves reliable within the history of vaccinations, they generally deliver subpar robust cellular-mediated immunity and pose many safety risks. Composed of proteins and /or peptides, subunit vaccines are safer and more precise alternatives to traditional approaches. However, the pharmacokinetic properties of the macromolecules that make up these vaccines hinder the subunit vaccine’s level of immunogenicity [d1] Examples of this hindrance include but are not limited to aggregation at the injection site and …

An Analysis Of The Production Of Pharmaceutical-Grade Acetone Via The Dehydrogenation Of Isopropanol (Ipa), Jordan Desplas

Honors Theses

The production of 99.9 wt% acetone from isopropanol in Unit 1100 is designed to start up in 2025 and operate for 12 years after startup. The engineering team was tasked with designing the process, creating an economic model, and optimizing the net present value (NPV). The process was simulated in AVEVA PRO/II Simulation for the design process, and the economic analysis was estimated in Microsoft Excel. Parametric and topological optimization was performed linearly on the unit operations in the process. The NPV was improved by $14M from a base case of $122M to an optimized case of $136M. The project …

Optimization Of A Fluidized Bed Reactor For The Production Of Acetone From Isopropyl Alcohol, Andrew Rawls Wasson

Honors Theses

For the optimization of the isopropyl alcohol to acetone process, Unit 1100, the Net Present Value (NPV) was used as the objective function to observe the economic impact of each of the optimization factors being tested. During the optimization process, it is not only important to optimize the process’s profitability but also to ensure that the process operates efficiently and meets product specifications. The goal of this optimization was to alter variables from the base case calculations of Unit 1100 to maximize the NPV of the unit. AVEVA ProII software was used to simulate the process and make changes to …

The Design Estimate Of A Warehouse Refrigeration System, Jackson Dear

Honors Theses

The intention of this project was to provide a design and cost estimate for the refrigeration systems within an industrial cold storage distribution center for Magnolia Country Frozen Foods, Inc. in East Rutherford, NJ. The facility includes eighteen 300,000 ft3 units (200 ft x 100 ft x 15 ft). These units require 200 tons of refrigeration at a maintained temperature of 0oF. This project's scope included choosing an optimal refrigeration system, selecting a refrigerant for use within the system, and providing a cost estimate for the purchase of the refrigeration system equipment and for the yearly cost associated with running …

Investigating Myosin Ensemble Force Generation Using Optical Tweezers, Janie Watts

Honors Theses

Myosin is a motor protein that facilitates muscle contraction and movement by stepping along actin filaments using energy from ATP hydrolysis. If myosin or other motors are disrupted throughout the body, it can have many harmful effects. Hypertrophic cardiomyopathy is a disease caused by gene mutations that affect myosin heavy chains in the heart. The tissue of the heart becomes abnormally thick, which can make it more difficult to pump blood or block blood flow out of the heart. Our goal is to discern the mechanistic difference function of a healthy and diseased heart. To accomplish this, we construct model …

Optimization And Analysis Of A Styrene Production Process, Alexis Kimpel

Honors Theses

The production of styrene from ethylbenzene in Unit 500 is designed to start up in 2024 and operate for 12 years after startup. The engineering team was tasked with designing the process, creating an economic model, and optimizing the net present value (NPV). The process was simulated in AVEVA PRO/II Simulation for the design process and to estimate the size of equipment. Parametric and topological optimization was performed subsequently on the unit operations in the process. The NPV was improved by $423M from a base case of -$919M to an optimized case of -$496M. The project is recommended to continue …

Optimization Of An Ethylbenzene To Styrene Production Facility, John Michels

Honors Theses

The purpose of this case study is to optimize the design and production of an ethylbenzene-to-styrene manufacturing facility, Unit 500. Compared to the original base-case design, the optimizations presented in this document will save approximately $337 million dollars without compromising the production requirements or quality. Optimization of this process used net present value as an objective function, with changes centered around the reactors, but also the separation equipment and exchangers prior to separation, as those devices most directly controlled process stream contents and conditions. The second set of reactors was removed in favor of using one optimized set of reactors, …

Optimization Of Styrene From Ethylbenzene Case Study, Jabria Daria Thompson

Honors Theses

The following pages detail the optimization process of styrene from ethylbenzene in the Styrene Production Plant, Unit 500. There were two parts of the assignment, each with slightly different end goals. The goal of the first part of the assignment, was to create a process that would effectively and efficiently increase the negative Net Present Value (NPV) of the production plant. Procedures taken in this process included developing a working kinetic process simulation model and optimizing this model through unit operations and heat integration, as well as developing an accurate economic model that will be used to evaluate the proposed …

Nuclear Energy As A Reliable And Safe Source Of Power Generation, Sarup Dhungana

Honors Theses

There is a high demand of energy for generating civil applicable power in the world and in the USA, correspondingly. The world has been consuming various sources to extract the power to meet its demands. Most of the power sources include renewable and non-renewable sources like fossil fuels, natural gas, coal, water, solar, wind, and nuclear power. Although most of these sources have many advantages in terms of their capacity and cost of production, nuclear power can be categorized as the emerging driving force in the United States and in the world for power generation, because of its reliability and …

The Design And Economic Optimization Of A Warehouse Refrigeration System, Hannah Talbot

Honors Theses

The purpose of this project was to design a cool warehouse refrigeration system for Acme Frozen Foods, Inc located in Newark, New Jersey. The refrigeration system was used to cool eighteen 300,000 ft³ refrigerated units (200 ft x 100 ft x 15 ft), each requiring 200 cooling tons of refrigeration at a level of 0 F. The scope of this project included determining the appropriate refrigeration cycle, selecting the most desirable refrigerant, and temperature ranges to optimize the performance of the system. This project also considered the economic cost of the power needed to run the refrigerated units and …

Optimization Of A Styrene Prodcution And Separation Process, Bryce Little

Honors Theses

A step wise optimization of Unit 500 was completed. Unit 500 is a planned ethylbenzene to styrene production plant that has a annual production goal of 100,000 metric tons of styrene. The cost of styrene on the market is $1,598. The base case of Unit 500 produced styrene at a cost of $2,650. Optimization was completed with an emphasis on parametric changes though material of construction and heat integration were also considered. The optimized Unit 500 design reduced the cost of styrene production to $2,035 per metric ton. While this represents a significant improvement on the base case cost, it …

Optimization Of A Fluidized Bed Reactor For The Production Of Styrene From Ethylbenzene, Gregory Espenan

Honors Theses

In order to optimize Unit 500, a styrene production plant, the Net Present Value (NPV) was used as the objective function to ensure every optimization strategy had a positive economic effect. To optimize a chemical plant, it is important to note efficiency, economics, product specifications, and production requirements. The goal of this project was to make changes to the base case of Unit 500 to minimize the cost to produce styrene for an upstream unit. PRO/II was used to simulate various points in different unit operations throughout the process. The NPV was measured after each unit operation was simulated to …

A Proper Framework For Studying Noise From Jets With Non-Compact Sources, Woutijn J. Baars, Nathan E. Murray, Charles E. Tinney

Faculty and Student Publications

A quantitative assessment of the acoustic source field produced by a laboratory-scale heated jet with a gas dynamic Mach number of 1.55 and an acoustic Mach number of 2.41 is performed using arrays of microphones that are traversed across the axial and radial plane of the jet's acoustic field. The nozzle contour comprises a method of characteristics shape so that shock-related noise is minimal and the dominant sound production mechanism is from Mach waves. The spatial topography of the overall sound pressure level is shown to be dominated by a distinct lobe residing on the principal acoustic emission path, which …

Metasurface Cloaks To Decouple Closely Spaced Printed Dipole Antenna Arrays Fed By A Microstrip-To-Balanced Transmission-Line Transition, Doojin Lee, Alexander B. Yakovlev

Faculty and Student Publications

In this work, we present a numerical study of 1D and 2D closely spaced antenna arrays of microstrip dipole antennas covered by a metasurface in order to properly cloak and decouple the antenna arrays operating at neighboring frequencies. We show that the two strongly coupled arrays fed by a microstrip-to-balanced transmission-line transition are effectively decoupled in 1D and 2D array scenarios by covering the dipole antenna elements with an elliptically shaped metasurface. The metasurface comprises sub-wavelength periodic metallic strips printed on an elliptically shaped dielectric cover around the dipole antennas and integrated with the substrate. We present a practical design …

Heteroacene-Based Amphiphile As A Molecular Scaffold For Bioimaging Probes, Tharindu A. Ranathunge, Mahesh Loku Yaddehige, Jordan H. Varma, Cameron Smith, Jay Nguyen, Iyanuoluwani Owolabi, Wojciech Kolodziejczyk, Nathan I. Hammer, Glake Hill, Alex Flynt, Davita L. Watkins

Faculty and Student Publications

The challenges faced with current fluorescence imaging agents have motivated us to study two nanostructures based on a hydrophobic dye, 6H-pyrrolo[3,2-b:4,5-b’]bis [1,4]benzothiazine (TRPZ). TRPZ is a heteroacene with a rigid, pi-conjugated structure, multiple reactive sites, and unique spectroscopic properties. Here we coupled TRPZ to a tert-butyl carbamate (BOC) protected 2,2-bis(hydroxymethyl)propanoic acid (bisMPA) dendron via azide-alkyne Huisgen cycloaddition. Deprotection of the protected amine groups on the dendron afforded a cationic terminated amphiphile, TRPZ-bisMPA. TRPZ-bisMPA was nanoprecipitated into water to obtain nanoparticles (NPs) with a hydrodynamic radius that was comparison, TRPZ-PG was encapsulated in pluronic-F127 (Mw = 12 kD), a polymer surfactant …

Design Of An Undergraduate Laboratory Experiment Utilizing A Stirred-Tank, Jacketed Bioreactor, Brennen Middleton

Honors Theses

Bioreactors are utilized in many industries, such as the food, alternative fuel, and pharmaceutical industries, to design and manufacture products. Unlike the similar chemical batch reactors utilized in many chemical processing facilities, bioreactor utilization requires engineers to consider a wider range of operating conditions and parameters. This results in a more complex reaction system and controls network. Due to this, it is imperative for chemical and biomedical engineering students to not only understand the theory surrounding these reactor systems, but also understand how to properly design and perform operating procedures with these systems. Thus, it was determined to create an …

Process Design And Optimization Of A Once-Through Dimethyl Ether Process Using Aveva Process Simulation, Jerrod Scott

Honors Theses

The primary purpose of the project on which I wrote this thesis was to design an optimize a once-through dimethyl ether process utilizing a software called AVEVA Process Simulation. The process was initially modeled and optimized to minimize the EAOC of the distillation column. The result of that effort was an optimized column with six stages with the feed entering the column at stage six. It had a height of 3 m, diameter of 0.44 m, and an EAOC of $65,100. This optimized solution was submitted to a Toller. The Toller provided available equipment to model the plant. From here, …

Aveva Competition 2021: Dimethyl Ether Production Process, Nicholas Gaouette

Honors Theses

The following study was conducted to assess the economic and process feasibility of a dimethyl ether (DME) production process. A portion of the methanol produced by an existing facility would be used to produce DME through a dehydration reaction. DME production is being considered as a means to compensate for lost methanol revenue, as methanol prices have recently decreased and an excess supply is present on the open market.

The first milestone in the study was the construction of a working process model within AVEVA Process Simulation. This steady-state process model would provide information essential to further design and optimization …

Economic Feasibility Of A Methanol To Dimethyl Ether Production Process To Avoid Contract Failure Shortfalls From The Covid-19 Pandemic, Jacob Noll, Robert Wasson, Harrison Mckinnis

Honors Theses

Our team entered the 2021 AVEVA Academic Competition, where teams of undergraduate senior chemical engineering students competed across the country. The competition was composed of two parts: the base case design and the optimization of a chemical process. As part of the competition, our team is acting as the Engineering team for a fictional company that has given us this project. Due to COVID-19, our methanol producing company has lost a contract with a customer, leaving 23,000 tonnes/yr of unclaimed methanol. We have two choices with this methanol: either sell the methanol on the market at the spot price for …

Ethylbenzene Production Case Study And Optimization, Brandon Borek

Honors Theses

The objective of this project was to investigate the process of producing ethylbenzene from the liquid-phase reaction of ethylene and benzene and perform parametric and topological optimizations to increase the net present value of the production facility. To do so, the base case conditions of the process were modeled and quantified economically followed by an investigation into the existing process to determine conditions that could be altered to improve the economic viability of the project. After optimizing the parametric conditions and topology of the process, the net present value of the project was increased by 305 million dollars to 191 …

Design And Analysis Of A Process To Convert Methanol Into Dimethyl Ether, Elisa M. White

Honors Theses

A recent economic downturn led to the loss of a contract for a company that sells methanol. The company has two options to recover some of the profit lost from the contract termination. One option is to sell the excess methanol at the spot market price, and the second option is to implement a process to convert the excess methanol into dimethyl ether. This project investigated the implementation of a process to convert the methanol from the lost contract into dimethyl ether. The process was simulated in AVEVA Process Simulation to estimate the size of equipment needed. A toller provided …

Design, Analysis, And Optimization Of A Process To Produce Dimethyl Ether From Methanol, Thomas Mathwig

Honors Theses

The company that the engineering team works for is facing a contract loss with one of its customers of methanol. To avoid economic losses, a process has been proposed for converting the unused methanol to dimethyl ether (DME) through a dehydration reaction. After a preliminary simulation of the base case and optimization of the distillation column, an Equivalent Annual Operating Cost (EAOC) of $140,000 was calculated for the column. The EAOC was the sum of the annualized capital investment and the annual operating cost. Determining the process to be worth pursuing, a Toller was brought in to provide rental equipment …

Influence Of Bulk And Surface Interactions From Thick, Porous, Soil-Based Substrates On The Spreading Behavior Of Different Viscosity Oils, Firoz Ahmed, Brenda Hutton-Prager

Faculty and Student Publications

Crude oils and motor oils are commonly identified in oil spills on land. Controlling and understanding their flow both across and into land is of paramount importance to minimize spread and subsequent damage to the ecosystem. Spreading kinetics and surface energy studies were conducted with these oils over several realistic soil-based matrixes, consisting of topsoil (silt-dominant), sand, clay, and moisture. Spreading area through a 1.3 cm deep matrix was reduced with increased moisture content, densely packed matrixes, and higher viscosity oils. Initial contact angle (CA) measurements for all oils was typically lower on clay matrixes due to its sheet-like structure …

“Greener” Chemical Modification Of Cellulose Nanocrystals Via Oxa-Michael Addition With N-Benzylmaleimide, Mohammad Jahid Hasan, Ashley E. Johnson, Esteban E. Ureña-Benavides

Faculty and Student Publications

Surface modification of cellulose nanocrystals (CNCs) was conducted by an oxa-Michael addition of primary hydroxyl groups on the CNC surface with N-Benzylmaleimide (BnM). Six principles of green chemistry were used to obtain the hydrophobized CNC. Two catalytic approaches were used, a self-catalyzed reaction where alkyl sulfuric acid on the surface of the CNC was the catalyst, and a base-catalyzed approach using triethylamine (TEA). DMSO was chosen as reaction solvent due to its low cost, low toxicity and ability to disperse native CNC compared to other polar diprotic solvents. NMR and FTIR studies confirmed the successful modification of CNCs in both …

Solubility Measurements Of Hydrophobic Solutes In Supercritical Carbon Dioxide And Subsequent Impregnation Into Paper Substrates For Surface Modifications, Arghavan Beheshtimaal

Electronic Theses and Dissertations

Supercritical Fluids (SCFs) have received a great deal of attention for their various applications in chemical, biochemical, pharmaceutical, and materials processing. In this study, we investigate surface modification to paper substrates using supercritical impregnation (SCI) techniques, with applications in food packaging. One of the key factors required for this study is understanding the solubility of hydrophobic solutes in supercritical carbon dioxide (scCO2). Polar compounds are poorly soluble in scCO2 due to their lack of polarity and frequently co-solvents are also introduced to enhance solubility. In this study, the maximum solubility of alkyl ketene dimer (AKD)/n-heptane and vegetable wax (VW)/n-heptane solutions …

Surface And Interfacial Phenomena Between Soil And Oil, Md Firoz Ahmed

Electronic Theses and Dissertations

Crude oil and motor oil spills on land have severe environmental consequences that pose threats to both humans and natural resources. It is particularly important to know the flow behavior of oils to protect terrestrial ecosystems from this kind of damage. The spreading kinetics, contact angle (CA), and droplet baseline studies of crude oil and motor oils were investigated over several realistic soil-based matrices composed of topsoil (silt-dominant), sand, clay, and moisture. It was found that with an increase in moisture content (MC), the spreading area decreased, and initial spreading time increased for all given oil. The initial CA generally …

Enzyme-Initiated Admicellar Polymerization, Elaheh Shakeri

Electronic Theses and Dissertations

Admicellar polymerization was developed in the 1980s as an economical method for modifying various surfaces. In admicellar polymerization, a low monomer to initiator (M/I) ratio was traditionally required to overcome this limitation and achieve high polymer conversion when oxygen was present in the headspace and dissolved in the reaction medium. To develop an environmentally friendly, cost-efficient, and feasible deoxygenation and initiation technique, we studied the use of glucose oxidase (GOx) in admicellar polymerization. In this method, GOx acts as the catalyst in the oxidation of ?-D-glucose, while consuming oxygen and generating hydrogen peroxide and D-glucono-?-lactone. There are many advantages of …

Wetting-Driven Formation Of Present-Day Loess Structure, Yanrong Li, Weiwei Zhang, Shengdi He, Adnan Aydin

Faculty and Student Publications

© 2020 The Authors Present-day loess, especially Malan loess formed in Later Quaternary, has a characteristic structure composed of vertically aligned strong units and weak segments. Hypotheses describing how this structure forms inside original loess deposits commonly relate it to wetting-drying process. We tested this causal relationship by conducting unique experiments on synthetic samples of initial loess deposits fabricated by free-fall of loess particles. These samples were subjected to a wetting-drying cycle, and their structural evolutions were documented by close-up photography and CT scanning. Analysis of these records revealed three key stages of structural evolution: initiation (evenly distributed cracks appear …

A Mathematical Framework For Estimating Risk Of Airborne Transmission Of Covid-19 With Application To Face Mask Use And Social Distancing, Rajat Mittal, Charles Meneveau, Wen Wu

Faculty and Student Publications

© 2020 Author(s). A mathematical model for estimating the risk of airborne transmission of a respiratory infection such as COVID-19 is presented. The model employs basic concepts from fluid dynamics and incorporates the known scope of factors involved in the airborne transmission of such diseases. Simplicity in the mathematical form of the model is by design so that it can serve not only as a common basis for scientific inquiry across disciplinary boundaries but it can also be understandable by a broad audience outside science and academia. The caveats and limitations of the model are discussed in detail. The model …

Comparative Analysis Of Simulation Models Of The Production Of Ethylbenzene, Osariemen Imafidon

Honors Theses

Process Engineering is all about making sure a raw material can become the desired product with as little variation as possible, while achieving the customer's specifications. Many equipment used for chemical processes cannot be physically inspected during operation at steady state, hence, the need for simulation software. The objective of this study was to compare the results of three different simulation packages to evaluate their efficacy within process design.

This study focused on the economic analysis of the production of Ethylbenzene using various models. The base case variables were inputted into each model to simulate the calculations for a fully …