Engineering Commons^™

4wd Baja Upright And Wheel Hub, Nathan Thompson, Jonathan P. Larson, Spencer D. Compan

Williams Honors College, Honors Research Projects

The University of Akron Zips Baja Team has switched to a 4-wheel-drive (4WD) vehicle as per the 2023 Baja Society of Automotive Engineers (SAE) rules. The 2022 Baja Vehicle was 2WD, thus the upright and wheel hub were designed exclusively for a 2-wheel-drive (2WD) Baja vehicle. This report entails the design process and methods of verification for the design of the 4WD upright and wheel hub.

Hendrickson Lift Kit, Matthew Rozmajzl

Williams Honors College, Honors Research Projects

This research project will be completed with Hendrickson Trailer as the sponsor. The goal of the project is to create a lift kit for a newer suspension system. The lift kit must provide enough lift force to lift an axle off the road and suspend it off the road while in transit. There are similar systems offered for different products at Hendrickson, but the configuration of this system is such that new brackets must be designed. The benefit of such a system is a reduction in wear on the lifted tires, and thus an increase in the life of the …

Fluid Power Vehicle Challenge, Bryce Towne, Ethan Andrews, Carter Moore, Andrew Sobel

Williams Honors College, Honors Research Projects

The Fluid Power Vehicle Challenge is a competition held by the National Fluid Power Association (NFPA) that challenges students to create a hydraulically powered vehicle to compete in four different races over two days. The vehicle has to be fully powered by hydraulics, with human power (such as pedaling) being used to move the hydraulic fluid. Electronics and pneumatics can be used to control the flow of the hydraulic oil. Vehicles also must have an energy storage device to take advantage of regenerative braking. The final competition was at the Norgren facility in Colorado from April 12th to April 14th. …

Nidec Automated Winder, Michael Pugh, Ben A. Swartz, Andrew Leonard, Garrett Dostal

Williams Honors College, Honors Research Projects

Nidec Drive Systems is a leading electric motor manufacturing company with several facilities in the US and around the world. However, as of recent, Nidec has started to see some signs of old and outdated production machines affecting their production numbers even though the demand for electric is ever increasing. In an attempt to repair some of these issues, Nidec reached out to the University of Akron to look for senior design groups to help design and standardize better production machines. We were tasked with redesigning a new winder, which is a machine that winds the copper coils to the …

Dome Tester, Clark Bates, Nikolas M. Kulin

Williams Honors College, Honors Research Projects

We are reconfiguring and modifying the previously built dome tester to be more user friendly and mechanically applicable. This has a long-term goal of being a usable teaching tool for manufacturing education within the college of engineering and polymer sciences. The dome tester pushes a metal dome into a clamped sheet of metal to test its forming limits and where necking occurs. We have implemented a better method of viewing the sheet sample as it is being deformed, and improved measuring methods for the distance a sample is deformed. By introducing these changes in conjunction with improved documentation of the …

Zips Racing Electric 2022 Brakes Subsystem Design, Nicholas Thomas

Williams Honors College, Honors Research Projects

This project will include the design, manufacture, and assembly of the entire brakes subsystem for the Zips Racing Electric (ZRE) 2022 car. Goals of the brakes system include a lightweight, modular, machinable, and rigid design. The project will begin in the Fall semester with the design of the pedals and rotors as well as calculations to specify master cylinders, calipers, pads, etc. Software such as SolidWorks CAD, SolidWorks FEA, and Mastercam CAM will be employed. Next, the second semester will involve manufacturing or purchasing necessary components. Prototype pedals will be manufactured for physical testing.

The project will be completed individually. …

Grinding And Super-Finishing Test Machine Project, Michael Simon

Williams Honors College, Honors Research Projects

A research project in The University of Akron to study grinding and super-finishing of silicon nitride ceramic was initiated by Dr. Siamak Farhad and sponsored by the Timken Company, with the assistance of undergraduate students Michael Simon, Ryan Hosso and Mathew Rozmajzl. The study required analysis of forces and scratches generated during grinding processes of silicon nitride samples. A testing assembly was designed and constructed to record the forces generated during grinding and super-finishing of silicon nitride samples in a computer-numerical-control machine. Silicon nitride samples were subjected to desired grinding and super-finishing operations and all forces generated during the process …

Human Powered Vehicle Team Challenge, Sydney Nedlik, Spencer Brodie, Maria Griffin, William Schell, Ryan Serraglio

Williams Honors College, Honors Research Projects

Design and build a Human Powered Vehicle in a team of five. Compete at the ASME HPVC competition in March of 2022. Re-establish the Human Powered Vehicle Team at the University of Akron.

Door Barricade, Alex Cerino

Williams Honors College, Honors Research Projects

My senior capstone project will be a door barricade. The main idea for the use of the door barricade is for schools in the case of an intruder. The barricade that I will be designing is a solution to the inefficient barricades that I saw at my high school. It could also be used at businesses and homes. My design would be easy to use and have a fail-safe option. The two areas of mechanical engineering technology that my capstone project will focus on are stress analysis and electronics. Every part for my door barricade is drawn in SolidWorks. All …

Smart Home Pet Feeder, Andrew Markja, Simona Zdravev, Timothy Zubek, Christian Jackson

Williams Honors College, Honors Research Projects

The goal of this project was to design a Smart Home Pet Feeder that will allow the owner to feed their pet using 4 different methods. The methods are: manually, scheduled, app/url, Alexa/Google. The advantages of this design are that it will become convenient for pet owners who are busy and unable to make it back to their house to feed their pets remotely or for those who enjoy the use of technology from within their home for no-trouble feeding.

Hydraulic Vehicle Challenge, Jacob Steiner, David Kotovets, Evan Blitz, Luke Fetherston, Alex Colucy

Williams Honors College, Honors Research Projects

The target goal of this project is for a team of students to design a vehicle which is based on human power as the primary mover of the system and achieves vehicle propulsion through the required use of hydraulics and pneumatics. In summary, the rider will power a pump that will generate pressure in order to move the fluid that drives the motor. This will result in the powered rotation of the wheels. As there are many possible designs, naturally, this means that the final design for the vehicle will have specific limitations such as weight and the required use …

Design For Additive Manufacturing (3d Printing), Michael O'Donnell, Michael J. Levy

Williams Honors College, Honors Research Projects

The goal of this project is to study the performance of a 3D printed mechanical part subjected to topology optimization. A part that is somewhat complex in its load bearing and geometry will be selected. That part will then be designed, finite element analysis will be performed on it to optimize its topology, and then it will be 3D printed and tested. The goal of topology optimization is to either save material cost and/or part weight due to the ability of 3D printing to manufacture parts with complex and obscure geometry.

Golf Ball Mark Repair Tool, Peter Gildea, Jacob Cunningham, Simon Aramouni, Michael Buckley, Andrew Perez

Williams Honors College, Honors Research Projects

Golf is a unique sport because the players consist of various ages. Inexperience and old age are two factors that cause issues on the course for others, such as improperly repaired divots. Divots are “craters” in the ground caused by the golf ball landing with high velocity on the greens. Older players encounter body limitations that make it difficult for them to bend over in order to properly fix the divots on every hole. This device will be created to properly repair divots to keep the greens in good playing condition for all players and to keep the older players …

Chainless Bike Drive, Dominic Apisa, Bradley Powell, Garrett Colvin, John Monsour

Williams Honors College, Honors Research Projects

The focus of this project was to design a drive system that could replace the conventional chain drive system, improving on both the efficiency and reliability, in addition to being low cost and lightweight. This report will provide background into why this group chose this as the subject of their project, as well as challenges faced throughout the design process. The design developed was a drive shaft driven by a system of pinions and gears, with a freewheel mechanism that allowed the system to coast when not pedaling. Due to cost and time constraints, only a prototype was created, with …

Additive Manufactured Formula Sae Brake Caliper, Auston Obringer, Robert Kucera, Steven Massarelli, Jared John, Michael Finer

Williams Honors College, Honors Research Projects

In a world where innovation has become the new norm, automobiles can often be found at the forefront of that movement. Each and every year there are new innovations and concepts that push modern day technology to the edge of what is physically possible. This can be seen from every aspect of these automobiles ranging from the conceptual stage all the way to production.

Most of these advancements have been made possible with the new technology that has become available on the manufacturing side of the designs. Instead of being constrained by what is possible on your average 3 to …

Human Powered Vehicle Internal Systems Design, Zachary Broadbent, Jordan Boos, Patrick Gaertner, Caleb Miner

Williams Honors College, Honors Research Projects

The objective of this design project is to redesign the seat and steering system for the Human Powered Vehicle Team. The goal of the seat design is too improve ergonomics by making it more comfortable and adjustable. In making the seat adjustable, it will be easier for drivers to achieve an optimal efficiency when pedaling. The aim for steering will be to improve the ergonomics as well as performance by analyzing steering systems in the past and evaluating how each design was successful and for what reason. Another main goal of the steering system will be improving the stability and …

Zips Electric Racing Suspension Design, Madison Hughes, Christopher Thompson, Erikah Jackson, Anna Signorino

Williams Honors College, Honors Research Projects

I am working with three others on the suspension and steering sybsystems for the Zips Electric Racing design team at The University of Akron. We are improving upon last year's design to help create an optimized vehicle. As part of this project, we take part in weekly design reviews and team meetings, model parts in Solidworks, and perform simulations and FEA using MATLAB/SIMULINK, Solidworks, and Optimum Kinematics.

Automated Runout Measurement Tool, Ethan Tisch

Williams Honors College, Honors Research Projects

A new measurement process and tool is to be developed to improve the existing method for measuring runout on the commutators of brushed DC product.

After an armature is manufactured, the commutator is inspected by placing the completed rotor assembly in one of several non-standard measurement fixtures. An indicator is then positioned on the commutator. A trained operator proceeds to rotate the armature while taking runout and bar-to-bar measurement at various positions along the length of the commutator.

This existing process is slow, costly, and unreliable. For these reasons, there is substantial economic pressure to develop a superior method for …

Fatigue Tester, Nicholas Fazio

Williams Honors College, Honors Research Projects

The purpose of this project is to combine all my experience, knowledge and skills that I’ve acquired over the years as a Mechanical Engineering Technology student to completely design and build a fatigue tester. This will give me valuable experience in the process of designing and assembling a product and give me a great example to add to my portfolio. The tester will be completed through a process of researching design and modeling. Once everything is properly calculated and designed the parts that can be fabricated will. The rest will be ordered and then everything will be assembled. Upon completion, …

Reactive Archey Target Design Team "Mimic", Brandon Croyle, Jacob Boss, David Rodgers, Austin Wivell

Williams Honors College, Honors Research Projects

This design project will aim to provide archery hunters with a platform to simulate shooting at string jumping deer. String jumping refers to a spooked deer hearing the snap of a bow string and instintivly ducking up to ten inches. This often results in wounded or missed deer. We will design and build a control system that uses the sound of a bow string as a trigger to operate a mechanical target system. A sound sensor will mimic a deer’s hearing in close range hunting and then send a signal to the mechanical system to replicate the dropping motion of …

Recumbent Bicycle Balancing Aid, James Hager

Williams Honors College, Honors Research Projects

For our senior design project, our team will be consulting to create a balancing aid system intended for the recumbent bicycle shown below in Figure 1. The owner of the bicycle is Robert Henderson, a former United States Navy sailor from Northeast Ohio who picked up biking and skiing while he was stationed in Maine in the late 80’s. While there, he took to the mountains on the rugged terrain and brought this passion of biking back home to share with his wife, Johanna once he completed his service to his country. Biking became an integral part of the …

Garbage Disposal, Madison Popa, Tyler Miller, Mitchell Wheeler, Johnathon Klebe

Williams Honors College, Honors Research Projects

The purpose of this report is to outline a new design for a sink garbage disposal system. The goal of this design is to develop a garbage disposal that could be made for less money, which would turn into a cost savings for the consumer and would lead to an increase in the amount of garbage disposal systems being used throughout the world. This allows the garbage disposal system to be marketed to different parts of the world that currently can’t afford the systems available on the market.

The increased use of garbage disposals, help reduce the amount of organic …

Human Powered Vehicle Design Team: Speed Variable Steering Stabilizer, Eric Miller, Matt Kraml

Williams Honors College, Honors Research Projects

The Human Powered Vehicle Competition (HPVC) is held annually by ASME at a few locations. The University of Akron has competed in the ASME-East and ASME-West competitions over the past handful of years against universities from all over the world. Objectives of each team for the competition are three-fold: vehicle design, racing performance, and innovation. Our senior design project involved working on the innovation concept for ASME-East 2018 held at Penn State University during the weekend of 4/13. Speed variable steering was decided upon by the entire HPVC team early in the design process as the innovation choice for this …

Lawn Mower Lift, Randall E. Schelcher

Williams Honors College, Honors Research Projects

Our team of engineers were given the task of coming up with a design project and designing the system, creating calculations, and brainstorming ideas. We set out to design a riding lawn mower lift. The purpose of this design was to assist in general maintenance like replacing blades, oil changes, etc.

To accomplish this task, our team started to brainstorm ideas and make sketches to look at all the options. We then did research and looked at different size lawn mowers and looked at the specifications. This helped our team to be able to design the size of platform needed …

Nfpa Fluid Power Vehicle Challenge, Ean H. Dickerhoof

Williams Honors College, Honors Research Projects

Every year the National Fluid Power Association hosts a Fluid Powered Vehicle Challenge, this exposes students from universities all around the United States to the power and possibilities of hydraulics. This year the University of Akron’s team of engineers set out to design a bicycle that would be competitive and innovative in all aspects of the competition. In order to accomplish this, the designed bicycle must excel in three categories of competition; a sprint race, an endurance race, and an efficiency challenge.

To accomplish this task the University of Akron’s team of engineers used a lightweight bicycle frame with many …

Chocolate Bar Wrapping Machine, Austin M. Hoff, Daniel R. Trepke, Caleb B. Krichbuam

Williams Honors College, Honors Research Projects

Gilbert Chocolates has proposed to manufacture a machine to wrap chocolate bars. This machine is intended to replace two people wrapping the chocolate bars by hand, which is a time consuming method. This is especially apparent between October and January when the workers are working long hours in preparation for the Christmas rush of customers. Currently wrapping a bar takes about a minute and Gilbert Chocolates wants this time reduced down to 20-30 seconds. The budget for this project is set at $1000, and is being funded by the company. This machine needs to fit in a cubic foot of …

The University Of Akron Nfpa 2015/2016 Chainless Challenge, Andrew Tupta, Andrew Ball, Stefan Stamboldziev, Jordon Spence, Sean Catchpole

Williams Honors College, Honors Research Projects

Parker Hannifin has issued a challenge to student design teams of creating a Chainless bike using a hydraulic system. Each student design team will be assigned a technical advisor from the University. The project will be divided into two phases after the initial kickoff. The first phase will align with senior design course for motion control and hydraulics and will yield the student obtaining knowledge in hydraulics, including bio-degradable fluids, pneumatics, electromechanical systems, green technologies (sustainable energy) and controlling force and motion. Students will be provided data sheets, a list of in-stock Parker components and by the end of the …

2015 Zips Sae Baja Brakes And Throttle System, Philip A. Bennett

Williams Honors College, Honors Research Projects

The SAE Baja student design team at The University of Akron is one of the longest-standing design teams at the university. The purpose of this team is to design, manufacture, test, and race an off-road vehicle within the guidelines of competition established by the Society of Automotive Engineers. The vehicle is made up of a small number of subsystems including frame, drivetrain, suspension, steering, and braking. The following will discuss all aspects of the design process of the braking and throttle system of the 2015 Zips Baja car. This process includes several steps and considerations such as design goals, system …

Design Of An Sae Baja Racing Off-Road Vehicle Powertrain, Eric T. Payne

Williams Honors College, Honors Research Projects

No abstract provided.