Engineering Commons^™

Performance And Emissions Study Of N+3 And N+4 Engine Models With Several Fuel Types Using Npss, Abel Solomon

McKelvey School of Engineering Theses & Dissertations

The aviation industry is known to be one of the major contributors to greenhouse gases accounting for 4.9% of the global greenhouse emissions. With the ever-increasing threat of climate change to the overall survival of the planet, the exploration of new technologies and alternative energy sources that minimize greenhouse gas emissions are of paramount importance. In this regard, the development of propulsion systems well suited for the performance and emissions requirements of future commercial aircraft plays a crucial role. This thesis investigates N+3 and N+4 technology-level propulsion systems that are proposed by NASA as possible propulsion systems for advanced single-aisle …

Computational Analysis Of Steady Hypersonic Flow Fields Of Nasa Benchmark Geometries Utilizing Ansys Fluent, Aidan Murphy

McKelvey School of Engineering Theses & Dissertations

The Hypersonic International Flight Research Experimentation (HIFiRE) program explores and advances hypersonic aerospace systems by developing a multitude of test flight geometries and conducting experimental test flights to obtain data for use in validation of computational models and results. This study focuses on computational validation of heat flux, and calculation of static pressure profiles, skin friction coefficient profiles, and flow contours. The flow fields studied are for Mach number 7.18 and angles of attack (α) of 0° & 2°. These flow fields include many compressible flow features such as an expansion wave at the intersection of the cone and flat …

Application Of Direct Simulation Monte Carlo Method To Computation Of Rf Signal Degradation During Hypersonic Flight, Andrew Derubertis

McKelvey School of Engineering Theses & Dissertations

In order to further understand the hypersonic blackout problem, the first step is to investigate models to quantify signal degradation and begin implementing these models to representative plasma sheath and flow data. This research is the first attempt at implementing a model to predict RF signal degradation through the plasma sheath surrounding the hypersonic air vehicle. The investigation is performed using a Direct Simulation Monte Carlo (DSMC) based flow solver. The dsmcFoam solver in the OpenFoam library is used to simulate the flow around hypersonic bodies to obtain flow field properties, most importantly the electron number density profile, to aid …

Computational Fluid Dynamics Modeling Of Hemodialysis In Patients With An Arteriovenous Fistula, Maximilian Roth

McKelvey School of Engineering Theses & Dissertations

With the advent of arteriovenous fistula (AVF) for use in hemodialysis, the anastomosis built for such use has become a central point of the study to understand the flow and wall shear stresses in such a system since very large wall shear stresses can lead to arterial/vein rupture. Considering the commonly used creation site of an anastomosis as connecting the radial artery to the cephalic vein, a model is created to calculate the wall shear stresses across various components of the system. The model depicts a connection of the specified vein and artery bridged together allowing the increase in blood …

Validation And Verification Of The Wray-Agarwal Turbulence And Algebraic Transition Models For 2d External Airfoil Flows, Dean Ryan-Simmons

McKelvey School of Engineering Theses & Dissertations

Validation and verification benchmark test cases are employed in computational fluid dynamics (CFD) to determine the best practices in application of various CFD tools. These cases focus on the geometry modeling, mesh generation, numerical algorithms, and turbulence models to ensure consistent and accurate numerical simulation of physical phenomena. Assessing model accuracy is essential to identify areas of improvement in various turbulence models. Flow past several symmetric NACA airfoils, namely NACA 0012, NACA 0015 and NACA 0018 are standard test cases for validating and evaluating turbulence models’ accuracy since the experimental data is available for these airfoils. Available wind tunnel data …

Foundations For Finite-State Modelling Of A Two-Dimensional Airfoil That Reverses Direction, Jake Michael Oscar Welsh

McKelvey School of Engineering Theses & Dissertations

Current 3-D finite-state wake models are incapable of simulating a maneuver in which the sign of the free-stream velocity changes direction and the rotor enters its own wake -- as might occur in the case of a helicopter which ascends and then descends. It is the purpose of this work to create a 2-D finite-state wake model which is capable of handling changes in free-stream direction as a precursor to development of a 3-D model that can do the same.

The 2-D finite-state model used for reentry modifications is an existing model created by Peters, Johnson, and Karunamoorthy. By the …

Numerical Simulation Of Flow Past An Airfoil With Ice Accretion On Leading Edge, Boyu Wang

McKelvey School of Engineering Theses & Dissertations

The focus of this research is on aerodynamic simulation of flow past NACA 23012 airfoil with clean surface and with ice accretion on its leading edge by using the commercial CFD solver ANSYS Fluent. Reynolds-Averaged Navier-Stokes (RANS) computations are performed using Spalart-Allmaras (SA) and Wray-Agarwal (WA) turbulence models. ANSYS mesh package ICEM is used to model the geometry and generate the mesh. The computations are performed at 0, 2, 4, 6, 8, 10, and 12 degrees angle of attack which are compared with experimental data. For the case of ice accretion at the leading edge, the physical geometry becomes more …

Foundations For The Coupled Inflow And Structural Dynamics Of Multi-Rotor Helicopters, Ethan Genter

McKelvey School of Engineering Theses & Dissertations

In this work, the Peters-Seidel finite-state model is expanded to calculate the coupled inflow and rotor dynamics of tandem rotor configurations. This establishes the foundation for a more complete multi-rotor, dynamic inflow model with finite-state methods. The derivation presented in this work is for the general case of two rotors in the same plane, overlapping and separated to varying degrees. It is the purpose of this work to study the unique and interesting dynamics and characteristics of various tandem systems heretofore not studied in a dynamic system. Moreover, it is the goal of this work to investigate how these systems …

Development And Application Of Elliptic Blending Lag K-Omega Sst Standard And Wall-Distance-Free Turbulence Model, Wenjie Shang

McKelvey School of Engineering Theses & Dissertations

In recent decades, Computational Fluid Dynamics (CFD) has become the most widely used technology to understand the fundamental complex fluid dynamics of turbulent flows as well as for modeling of turbulent flows in industrial applications. In industrial applications, the widely used methodology is to solve Reynolds-Average Navier-Stokes Equations (RANS) equations in conjunction with a turbulence model since it strikes a balance between accuracy and computational cost compared to other high fidelity approaches namely the Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS), There are a large number of turbulence models proposed in past five decades, majority of them are …

Cfd Modeling Of Vertical Axis Wind Turbine Arrays Using Actuator Cylinder Theory, Cory Schovanec

McKelvey School of Engineering Theses & Dissertations

The goal of this thesis is to analyze the flow field and power generation from a vertical axis wind turbine (VAWT) by extending the Actuator Cylinder Model to include the viscous effects. Turbulent flow effects in the Actuator Cylinder Model are modeled by solving the Reynolds-Averaged Navier-Stokes (RANS) equations with the Spalart-Allmaras (SA) turbulence model in ANSYS FLUENT. A study is performed to establish mesh independence of the solutions. Numerical solutions on a fine mesh are compared to existing theoretical results based on inviscid theory for a series of flow conditions and turbine sizes. Similar trends in the present turbulent …

Potential Of Hydrodynamic Metamaterial Cloak For Drag Reduction, Rong Zou

McKelvey School of Engineering Theses & Dissertations

Metamaterials are rationally designed artificial materials composed of tailored functional building blocks densely packed into an effective material. While metamaterials historically are primarily thought to be associated with negative index of refraction and invisibility cloaking in electromagnetism or optics, it turns out that the simple metamaterial concept also applies to many other areas of physics namely the thermodynamics, classical mechanics including elastostatics, acoustics, fluid dynamics and elastodynamics, and in principle also to the quantum mechanics. The goal of this thesis is to introduce and evaluate the potential of a hydrodynamic metamaterial cloak for drag reduction of objects in viscous flow. …

Computational Fluid Dynamics Analysis Of Inverted, Multi-Element Airfoils In Ground Effect, Michael Grabis, Ramesh K. Agarwal

McKelvey School of Engineering Theses & Dissertations

Formula SAE cars are formula-styled race cars designed to race on an autocross circuit. The autocross circuit is mostly comprised of turning sections as well as a limited amount of straight sections for passing other cars. Highly competitive cars in the competition implement aerodynamic devices to generate negative lift for the race car. This negative lift, or downforce, increases the amount of traction between the race car’s tires and the ground ultimately allowing the drivers to turn at faster speeds. Commonly used aerodynamic devices are a front and rear wing; the wing cross sections are defined by configurations of multiple …

Computation Of Flow Fields Due To Single- And Twin-Jet Impingement, Xiang Zhang

McKelvey School of Engineering Theses & Dissertations

The thesis consists of two parts. The first part focuses on numerical simulations and their comparison with experimental data for single-jet impingement on ground. Angles between the axisymmetric jet and impingement surface considered are 15, 30 and 90 degree. It is shown that both the k-epsilon and Wray-Agarwal (WA) model can predict the flow fields in good agreement with the experimental results. The second part extends the first part to twin-jet normal impingement on the ground. It focuses on numerical simulation of fountains formed by the twin-jet impingement. The fountains can be normal straight upward when the two jets are …

Sufficient Conditions For Optimal Control Problems With Terminal Constraints And Free Terminal Times With Applications To Aerospace, Sankalp Kishan Bhan

McKelvey School of Engineering Theses & Dissertations

Motivated by the flight control problem of designing control laws for a Ground Collision Avoidance System (GCAS), this thesis formulates sufficient conditions for a strong local minimum for a terminally constrained optimal control problem with a free-terminal time. The conditions develop within the framework of a construction of a field of extremals by means of the method of characteristics, a procedure for the solution of first-order linear partial differential equations, but modified to apply to the Hamilton-Jacobi-Bellman equation of optimal control. Additionally, the thesis constructs these sufficient conditions for optimality with a mathematically rigorous development. The proof uses an approach …

Development Of A Multi-Probe Kelvin Scanner Device For Industrially-Relevant Characterization Of Surface-Activated Carbon Fiber Reinforced Thermoplastic Composites, Kirby Simon

McKelvey School of Engineering Theses & Dissertations

Carbon fiber reinforced thermoplastic (CFRTP) composites are becoming increasingly attractive materials in manufacturing due to their lightweight nature, mechanical strength, and corrosion resistance. Surface activation of these materials is usually required during processing to increase the bond strength of assemblies (aerospace and automotive industries) or improve adhesion with implants (biomedical industry). Industrially-relevant, nondestructive quality control methods for assessing the activation state of these materials do not currently exist, however. Applying principles discovered through the use of scanning probe microscopy, a multiple-probe Kelvin scanning (MPKS) device has been developed that can assess the uniformity of the activation state of plasma-treated CFRTP …

Development Of A One-Equation Turbulence Model Based On K-Ε Closure And Its Extension For Computing Transitional Flows By Including An Intermittency Transport Equation, Cheng Peng

McKelvey School of Engineering Theses & Dissertations

No abstract provided.

Effects Of Secondary Stall And Unsteady Free-Stream On Blade Drag And Pitching Moments, Michael Malick

McKelvey School of Engineering Theses & Dissertations

Dynamic stall is a complex aerodynamic phenomenon occurring in helicopter rotors, limiting the flight envelope and causing control linkage damage and instabilities. The Peters-Modarres semi-empirical dynamic stall model is extended to simulate pitching moment and drag in unsteady freestream and yawed flow, including the effects of secondary stall. The aerodynamics are implemented as a state-space model, suitable for time-marching or aeroelastic analyses. With small modifications to the original stall model, secondary stall effects and unsteady freestream can be simulated without adding additional states. An optimization routine determines sets of parameters that minimize the error between the modeled solution and experimental …

Effects Of Secondary Stall And Unsteady Free-Stream On Blade Drag And Pitching Moments, Michael Malick

McKelvey School of Engineering Theses & Dissertations

Dynamic stall is a complex aerodynamic phenomenon occurring in helicopter rotors, limiting the flight envelope and causing control linkage damage and instabilities. The Peters-Modarres semi-empirical dynamic stall model is extended to simulate pitching moment and drag in unsteady freestream and yawed flow, including the effects of secondary stall. The aerodynamics are implemented as a state-space model, suitable for time-marching or aeroelastic analyses. With small modifications to the original stall model, secondary stall effects and unsteady freestream can be simulated without adding additional states. An optimization routine determines sets of parameters that minimize the error between the modeled solution and experimental …

Development And Application Of Quadratic Constitutive Relation And Transitional Crossflow Effects In The Wray-Agarwal Turbulence Model, Hakop Jack Nagapetyan

McKelvey School of Engineering Theses & Dissertations

Computational Fluid Dynamics (CFD) has now become an almost indispensable tool for modern engineering analysis of fluid flow over aircrafts, turbomachinery, automobiles, and many other industrial applications. Accurate prediction of turbulent flows remains a challenging problem. The most popular approach for simulating turbulent flows in complex industrial applications is based on the solution of the Reynolds-Averaged Navier-Stokes (RANS) equations. RANS equations introduce the so called “Reynolds or turbulent stresses” which are generally modeled using the Boussinesq approximation known as “Turbulence modeling.” Despite their development over a century, the turbulence models used with RANS equations still need much improvement. The first …

Validation Of Cfd Simulations For Hypersonic Flow Over A Yawed Cone, Julian Cecil

McKelvey School of Engineering Theses & Dissertations

This study aims to numerically simulate the wind tunnel results for hypersonic flow over a circular cone of semi-apex angle of 10 degrees yawed from 0° to 20° using the commercial computational fluid dynamics software ANSYS Fluent. The ANSYS workbench is used to create the 10° semi-apex circular cone with a shock aligned structured mesh of 3.05 million cells surrounding the cone. Simulation boundary conditions for pressure and temperature in the far field correspond to Tracy’s wind tunnel experiment at Cal Tech. The six simulations cases are conducted for yaw angles of 0, 8, 12, 16, 20 and 24 degrees. …

Numerical Simulation Of A High Strain Rate Biaxial Compression Apparatus, Michael Lagieski

McKelvey School of Engineering Theses & Dissertations

Few experimental methods today are capable of exploring the strength of materials at high strain rates (10⁵ s^-1). Those that are capable, such as the Split Hopkinson Bar, Taylor Anvil and Plate Impact suffer from instability and are generally limited to one dimensional wave propagation. Of particular interest is material response under biaxial compression, similar to that seen in inertial confinement fusion. Laser fusion fuel pellets typically undergo large strain rates as well as plastic deformation and non-linear behavior. This work briefly outlines an experimental procedure designed to replicate these large strain rates under biaxial compression using …

Minimum Induced Power For A Helicopter In High-Speed Forward Flight, Junsoo (Sean) Hong

McKelvey School of Engineering Theses & Dissertations

A dynamic inflow model is used to calculate minimum induced power for a helicopter in high-speed forward flight with infinite and finite number of blades. Comparisons between analytical and numerical results are shown and they show good agreement. Different flow conditions (such as with and without reverse flow or inflow feedback) are used to show how each condition affects optimum induced power. Several results confirm the findings of earlier investigations such as a singularity in rotor power in reverse flow and induced power reduction with increase in blade number. Some of the new findings are that greater inflow feedback (due …

Aerodynamics And Shock Buffet Of A Transonic Airfoil In Ground Effect, Boshun Gao

McKelvey School of Engineering Theses & Dissertations

No abstract provided.

Aerodynamics And Vortex Structures Of A Flapping Airfoil In Forward Flight In Proximity Of Ground, Hang Li

McKelvey School of Engineering Theses & Dissertations

The traditional flapping wing high lift mechanism research mainly focuses on the wing in unbounded flow. However, the real insect flight includes not only the unbounded flow field but also the near-surface flight. Therefore, research on near-surface flight can help reveal the high-lift mechanism of insect flight and should also be beneficial to the research on Micro-Air-Vehicles (MAV). In this thesis, the flow fields of an airfoil in hover and forward flight are simulated in the presence of ground by newly available function of “dynamic meshing” in ANSYS Fluent is employed. The characteristics of aerodynamics, pressure distribution, and vortex structure …

Design And Computational Fluid Dynamics Analysis Of An Idealized Modern Wingsuit, Maria E. Ferguson

McKelvey School of Engineering Theses & Dissertations

The aerodynamics of a modern wingsuit has been the subject of very few detailed scientific studies to date. The prevailing design process remains the dangerous “sew and fly” method, in which designs are tested when they are first flown. This study utilizes Computational Fluid Dynamics (CFD) tools to analyze the flow field and aerodynamics of an idealized wingsuit, which is designed using Computer-Aided Design (CAD) modeling. The 3D CAD software Autodesk Inventor is used to create the wingsuit model, which is designed with a Gottingen 228 airfoil cross-section and a relatively large planform of aspect ratio 1.3. The commercial flow …

Uncertainty Quantification Of Turbulence Model Closure Coefficients On Openfoam And Fluent For Mildly Separated Flows, Ike Witte

McKelvey School of Engineering Theses & Dissertations

In this thesis, detailed uncertainty quantification studies focusing on the closure coefficients of eddy-viscosity turbulence models for several flows using two CFD solvers have been performed. Three eddy viscosity turbulence models considered are: the one-equation Spalart-Allmaras (SA) model, the two-equation Shear Stress Transport (SST) k-ω model, and the one-equation Wray-Agarwal (WA) model. OpenFOAM and ANSYS Fluent are used as flow solvers. Uncertainty quantification analyses are performed for subsonic flow over a flat plate, subsonic flow over a backward-facing step, and transonic flow past an axisymmetric bump. In the case of flat plate, coefficients of pressure, lift, drag, and skin friction …

Numerical Study Of The Aerodynamics Of Dlr-F6 Wing-Body In Unbounded Flow Field And In Ground Effect, Ning Deng

McKelvey School of Engineering Theses & Dissertations

The main focus of this thesis is on the simulation of flow past a three-dimensional wing-body configuration (DLR-F6) in ground effect; a complex 3D wing-body configuration in ground effect has never been analyzed in the aerodynamics literature to date. For the purpose of validation of the simulation approach, computations are performed for the DLR-F6 wing-body in unbounded flow and are compared with the experimental data. The commercial CFD solver ANSYS FLUENT is employed for computations. Compressible Reynolds-Averaged Navier-Stokes (RANS) equations in conjunction with Spalart-Allmaras (SA) and - Shear Stress Transport (SST) turbulence models are solved. The validated code is employed …

Shape Optimization Of Supersonic Bodies To Reduce Sonic Boom Signature, Junhui Li

McKelvey School of Engineering Theses & Dissertations

In recent years there has been resurgence of interest by aerospace industry and NASA in supersonic transport aircraft. In recent studies, the emphasis has been on shape optimization of supersonic plane to reduce the acoustic signature of sonic boom resulting from the supersonic aircraft at high altitude in cruise flight. Because of the limitations of in-flight testing and cost of laboratory scale testing, CFD technology provides an attractive alternative to aid in the design and optimization of supersonic vehicles. In last decade, the predictive capability of CFD technology has significantly improved because of substantial increase in computational power, which allows …

Evaluation Of Various Turbulence Models For Shock-Wave Boundary Layer Interaction Flows, Francis K. Acquaye

McKelvey School of Engineering Theses & Dissertations

Despite the modeling capabilities of current computational fluid dynamics (CFD), there still exist problems and inconsistencies in simulating fluid flow in certain flow regimes. Most difficult are the high-speed transonic, supersonic and hypersonic wall-bounded turbulent flows with small or massive regions of separation. To address the problem of the lack of computational accuracy in turbulence modeling, NASA has established the Turbulence Modeling Resource (TMR) website and has issued the NASA 40% Challenge. The aim of this challenge is to identify and improve/develop turbulence and transition models as well as numerical techniques to achieve a 40% reduction in the predictive error …

Semi-Empirical Modeling Of Two-Dimensional And Three-Dimensional Dynamic Stall, Ramin Modarres

McKelvey School of Engineering Theses & Dissertations

Helicopters are generally limited in their performance by the phenomenon of dynamic stall. The purpose of this work is to develop a method for modeling dynamic stall that is appropriate to preliminary design and flight simulator applications. Unlike other semi-empirical dynamic stall models, the model developed in this thesis, not only counts for the well-known, three-dimensional flow effects on the stalled loads but also captures the secondary vortex-shedding phenomenon that has been seen in experiments. The fundamental physics that modify dynamic-stall behavior and that have been extended from two-dimensional to three-dimensional flow are, namely: 1.) yawed flow, 2.) time-varying velocity, …