Vocational Education Commons^™

Library Steam Kits: Developing Circulatable Curriculum For Community Steam Learning, Daphne Fauber, Ashley Fletcher

Purdue Journal of Service-Learning and International Engagement

Public libraries serve as repositories for a movement described as cultivation of the Library of Things. In the wake of COVID-19, the West Lafayette Public Library enhanced its existing Library of Things collection through the creation of science, technology, engineering, art, and mathematics (STEAM) kits. Since 2017, the West Lafayette Public Library has held regular free STEAM programs for the community; those programs were put on hold during the height of the COVID-19 pandemic, which concurred with a library renovation. These kits provide the community with the ability to learn STEAM concepts at home engaging, hands-on activities that may otherwise …

Using Self-Efficacy Theory To Design Arduino Instruction For Novices: A Replication Study, Donald M. Johnson, Michael Pate, Christopher M. Estepp, George Wardlow

Journal of Research in Technical Careers

A replication study was conducted to determine the effectiveness of an instructional treatment based on self-efficacy theory when used with novice Arduino microcontroller users. Students (n = 32) in an introductory university agricultural systems technology course participated in a lesson on Arduino microcontrollers, circuit breadboarding, and Arduino programming which included four hands-on practice tasks, designed to provide students with positive mastery, vicarious and social persuasion experiences. Next, students completed a laboratory activity and were provided additional opportunities for mastery, vicarious, and social persuasion experiences. The one-group pretest-posttest design indicated the instructional treatment had significant (p < .001) and large effects in increasing students’ interest in Arduino, breadboarding self-efficacy, programming self-efficacy, and Arduino knowledge. These findings were consistent with the original study and provided additional evidence for self-efficacy theory as an effective model for developing instruction for novice Arduino users. Students’ written comments provided additional insight concerning the instructional treatment.

Enhancing Online Hands-On Learning In Engineering Education: Student Perceptions And Recommendations, Dalya Ismael

Engineering Technology Faculty Publications

Designing effective online engineering courses that include hands-on components or labs requires a thorough understanding of student perspectives and the development of strategies to improve learning outcomes. Despite the growing number of studies on online learning, little information exists on the unique challenges engineering students face in hands-on courses. To address this gap, this study used a questionnaire to gather engineering students’ perspectives on course design and delivery. The findings highlight the challenges faced by students in online engineering courses with hands-on components, such as difficulty in collaborating with peers. To address these challenges, recommendations are proposed, such as incorporating …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Design Of A Freight Transportation Outreach Curriculum, Breanna Stoesz

Civil Engineering Undergraduate Honors Theses

This project is centered around finding a solution to the shortage of truck drivers within the freight industry. Specifically, this project aims to lessen this shortage by ensuring potential future drivers are aware of the benefits of the industry and are encouraged to consider this career path for themselves. By producing an engaging and educational freight transportation curriculum for middle and high school students to go through in outreach programs, these students would have an increased likelihood of joining the trucking profession and encourage others to become informed about the profession as well. In addition to the direct driving role, …

The Music Bluetooth Controller: An Intersection Between Technology And Music, Lydia Wu

Senior Honors Theses

The modern musician faces a new challenge: how can technology be used to enhance a performance? This thesis documents the development of a Bluetooth remote controller that will aid today’s performing musicians by interacting with a digital display (e.g., an iPad) to flip musical score pages remotely. At its core, while mimicking a Bluetooth pedal (the current industry standard), this device attaches to the musician’s hand. In its pilot stages, the device has been referred to “MBC” (Music Bluetooth Controller).

Define “Learning Engineering” With The Trap Framework, Ke Zhang, Meina Zhu

Administrative and Organizational Studies

While the term “learning engineering” was first coined by Herbert [1]; it is becoming more salient recently. But there is not a commonly shared understanding of learning engineering as a professional or an academic field. Thus, we explored a range of resources, including scholarly publications and discussions, websites and initiatives of selected professional organizations, resources from related USA government and agencies, recent job posts and learning engineering degree programs to find relevant rhetoric, descriptions, curricula, task forces and other resources on learning engineering. Based on a critical synthesis of the above-mentioned materials, we argue that learning engineering is an emerging …

Blast-Building Leaders For Advancing Science And Technology: A Partnership Between The Virginia Space Grant Consortium And The University Of Virginia, Virginia Polytechnic Institute, And Old Dominion University, Cynthia Tomovic, Mary Sandy, Julie Back, Vukica Jovanovic, Kim Lester, Edward Murphy, Sueanne Mckinney, Mileta Tomovic

STEMPS Faculty Publications

This paper presents the development and delivery of educational summer intensive programs for high school students that are designed to encourage students’ interests in the STEM-related fields and the motivation to pursue a STEM-related degrees in college. BLAST (Building Leaders to Advance Science and Technology) is designed as a summer-intensive, residential, on-campus STEM-learning experience for rising ninth and tenth graders. With the intention of improving the STEM-related workforce pipeline in the Commonwealth of Virginia, Virginia Space Grant Consortium (VSGC) offers multiple BLAST programs across the Commonwealth. BLAST programs are designed as intensive three-day, STEM-related three-hour lecture-lab experiences that are reinforced …

Digital Educational Modules Development For The Career And Technical Cybersecurity Pathways During The Covid-19 Pandemic, Vukica Jovanović, Murat Kuzlu, Otilia Popescu, Petros Katsioloudis, Linda Vahala, Michael Wu, Deborah Marshall, Michael Crespo, Mary Addison

Engineering Technology Faculty Publications

Virtual learning has been used now for several decades, but it has never had a bigger impact on student learning than in the era of the COVID-19 pandemic. Universities and schools faced shutdowns all around the world, and teachers had to adapt rapidly to online mode of instruction. Many educators were faced with a triage approach with no previous experience in distance learning, a lack of resources for professional development, and already existing shortages of current educational modules that could assist them in their day-to-day jobs. This gap was especially evident in areas such as career and technical education (CTE) …

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Mechanism Design And Analysis: Developing An Understanding Of Mechanism Motion Through Graphical Modeling, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide Technology and Engineering Educators with foundational knowledge of mechanism design and analysis and the ability to develop middle and high school students' mechanism knowledge during practical hands-on learning activities in the STEM classroom. Technology and Engineering Educators' implementation of mechanism design and analysis could promote students' increased depth of mechanical knowledge and ability to apply this knowledge during engineering design challenges. In this article, the authors present an introduction to four-bar mechanism design and analysis using CAD software to produce graphical representations. After designing mechanisms graphical, students should be allowed to produce …

Building Our Future: Positive Steps Forward For Apprenticeship Education And Training In Ireland, Roisin Murphy Dr

Level 3

The construction labour market has undergone a period of considerable turbulence resulting from economic cyclicality over the last decade. While some facets of the labour market have recovered in line with economic growth, there remain challenges in attracting new apprentices. The issue is particularly pronounced for certain “wet trades”; namely bricklaying, floor and wall tiling, painting and decorating and plastering.

A mixed method research strategy was employed for the purpose of determining labour market trends for these trades, comprising of employer and apprentice surveys in addition to semi-structured interviews. Findings from the research uncover not only a shift …

Small Gas Engines Interactive Notebook, P. Troy White

STEM & Agricultural Education Curriculum Resources

A Small Gas Engines interactive notebook to help prepare students for the Briggs & Stratton Master Service Technician Exam 1.

Enhancing Preservice Teachers' Intention To Integrate Engineering Through A Multi-Disciplinary Partnership (Evaluation), Francisco Cima, Pilar Pazos, Jennifer Jill Kidd, Kristie S. Gutierrez, Stacie I. Ringleb, Orlando M. Ayala, Krishnanand Kaipa

Engineering Management & Systems Engineering Faculty Publications

Driven by the need to broaden participation and increase recruitment in STEM fields, considerable efforts are underway to promote the infusion of engineering into elementary and secondary grade levels. The benefits of engineering education and the strong support from professional and educational groups are well documented, yet the actual integration of engineering content in the K-12 setting remains a challenge. Pre-college educator programs that train future teachers are a natural target for the integration efforts. Although elementary educators recognize the importance of integrating engineering in their classrooms, they often lack the confidence to teach engineering content. The absence of effective …

Can Backward-Chained, Ab-Initio Pilot Training Decrease Time To First Solo?, Samuel M. Vance Ph.D., Kat Gardner-Vandy Ph.D., Jared Alan Freihoefer

Journal of Aviation/Aerospace Education & Research

Flight simulation has made progressively significant inroads into pilot training at all levels of a pilot’s career – typically starting with training for the Instrument rating in light aircraft and concluding with Type Certification in transport category jetliners. This research was designed to explore if significant training inroads could also be offered to ab-initio pilots, those with no prior flight experience. An experimental group of four pilot trainees, without prior flight experience, were exposed to flight in a backwards-chained simulation starting from 4’ AGL (Above Ground Level). Graduated, exponential increments of both altitude and distance from landing were successively added …

Digitalization Of Educational And Methodological Support For The Training Of Aviation Dispatchers, Zair Ziyaevich Shamsiev

International Journal of Aviation, Aeronautics, and Aerospace

The tasks of improving the educational process of training civil aviation dispatchers on the basis of the development and implementation of digital teaching aids are considered. Legislative and regulatory documents are accepted as an object of digitalization. The end result of the research is expressed in the provision of the educational process with a special electronic educational complex, which has the functions of providing the necessary information and conducting practical exercises to deepen, consolidate and control knowledge in the field of aviation documents.

Reintroduction Of Skilled Trade Programs For High School Students, Cristian Ayala-Quirino

Construction Management

The curriculum that incorporated skilled trades has vanished from many high schools, and more students are encouraged to attend college instead of pursuing trades. People view construction labor positions as jobs instead of careers. The construction industry is facing a substantial labor shortage amongst skilled laborers throughout the whole industry. Not enough people know how beneficial a career in the construction labor force can be. If more people knew about these career opportunities, they might have a greater interest in pursuing a career as a skilled tradesperson. To comprehend students’ understanding of the construction industry and examine where we can …

Women In Aviation: A Phenomenological Study Exploring The Needs And Wants Necessary For Graduation, Eugene Kim, Jorge L. D. Albelo

Student Works

Despite the increased awareness of gender and race equality movements, today's population of minority women in aviation is still underrepresented. This research focused on underrepresented minority women who want to pursue a career in the aviation field and what factors affect their level of success in a specialized aviation higher education institution. There is not enough data and research surrounding the topic of minority women in aviation and their paths to success in these institutions. This qualitative research aimed to bridge the existing gap in the literature related to minority women in aviation and their needs and wants to complete …

Method Of Joints: Theory And Practice Of Designing, Building, And Testing Trusses, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The authors of this article, like many of us, are proponents of engineering education but are also proponents of shop skills, craftsmanship, technological literacy, and the tacit knowledge and skills developed through applying sound theories during practical hands-on learning. The authors believe that engineering is an important aspect of our discipline, but so are the application of thinking, tool skills, measurement, geometric construction, manufacturing, instrumentation, testing and analysis, mathematical and scientific theories, and many other hands-on, minds-on skillsets that all need to maintain association with our discipline. As the authors are proponents for engineering education that is done well, they …

Cross-Border Development: A Long-Term Role For Universities, Robert Brian Smith, Nucharee Nuchkoom Smith

ASEAN Journal of Community Engagement

Low-income economies are experiencing potential serious threats in terms of long-term sustainability and social development. At the same time, most developing economies are grappling with possible disruptions from the Fourth Industrial Revolution and the current COVID-19 pandemic and its economic consequences. However, every economy has the same goal of elevating its status to that of a developed country. This research uses the narrative/case study approach to examine cross-border development and the role that universities can play as important actors in the development of society. Moreover, this research combines observations and literature analysis. Universities are clearly best placed to play an …

National Summer Transportation Institute: Increasing Career Awareness In Civil Engineering For Underserved High School Students, Melanie L. Villatoro, Janet Liou-Mark

Publications and Research

Our nation needs to increase the number of students pursuing degrees in the fields of Science, Technology, Engineering, and Mathematics (STEM) and those leading to transportation-related careers. In order to meet the demand for qualified graduates in transportation, it is necessary to diversify the pool of students entering college with an interest in these fields. The National Summer Transportation Institute (NSTI) is an educational initiative developed by the Federal Highway Administration (FHWA) and Department of Transportation (DOT). The NSTI at City Tech was designed to increase awareness of transportation-related careers among New York City high school students. The structure of …

Evolution Of Computational Thinking Contextualized In A Teacher-Student Collaborative Learning Environment., John Arthur Underwood

LSU Doctoral Dissertations

The discussion of Computational Thinking as a pedagogical concept is now essential as it has found itself integrated into the core science disciplines with its inclusion in all of the Next Generation Science Standards (NGSS, 2018). The need for a practical and functional definition for teacher practitioners is a driving point for many recent research endeavors. Across the United States school systems are currently seeking new methods for expanding their students’ ability to analytically think and to employee real-world problem-solving strategies (Hopson, Simms, and Knezek, 2001). The need for STEM trained individuals crosses both the vocational certified and college degreed …

Does The Use Of Simulation Significantly Impact Students’ Perceptions Of Their Air Traffic Control Knowledge And Skill?, Meron Lindenfeld, Jeanne Radigan, Michael Figuccio

Journal of Aviation Technology and Engineering

Simulation has served as an instructional supplement in education and training within various fields such as nursing, business, and flight training. Prior research studies have documented its usefulness. Simulation-based lessons have also been used for air traffic control (ATC) training, but little research has been conducted on the usefulness of simulation in this application. This study measured the level of influence that ATC simulation had on students’ perception of their ATC knowledge and skill level and their commitment to a career in ATC.

Data were collected by surveying students at four institutions of higher education after they completed ATC courses …

Civil Engineer Company Grade Officer Competency-Based Education Modeling, Scott R. Guerin

Theses and Dissertations

The importance of continuing education for professionals cannot be understated. This importance is doubly true for Air Force Civil Engineer Company Grade Officers who are members of not only the profession of engineering, but also the profession of arms. Air Force senior leaders understand this importance and required an update to the existing developmental education model, with a paradigm shift toward competency-based education and credentialing. Unfortunately, the Air Force Civil Engineer career field does not currently possess the required information to create a model in compliance with the senior leader directives. This research aims at establishing the required characteristics of …

Concrete Beam Design: Pouring The Foundation To Engineering In T&E Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Ask a middle or high school student if they could design a concrete beam that weighs only 20 pounds and is 36” long but must hold 600 pounds without failing. What is the student likely to say? What if the student was told that, with some optimized decision making based on relatively straightforward mathematics, their beam could hold 2400 pounds or more? The focus of this article is not on concrete beam design, it is rather an introduction to engineering principles in beam design using a lab activity. The concepts and skills learned in this article will lead students into …

Analyzing Concrete Beam Design: Verifying Predictions In T&Ee Classrooms, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

Design is often accepted as a fundamental aspect of engineering (Dym, et al., 2005). The design process is frequently portrayed as a set of steps. However, the design process is more complex than just a set of steps in a relatively fixed process. The complex nature of design, design thinking, questioning, and decision-making is exactly what technology and engineering classrooms are well suited to address. When addressing the question—“Why is technology and engineering education (T&EE) so important?”—the authors believe T&EE’s importance relates to our discipline’s ability to solve complex problems by balancing theory and practice in engaging hands-on learning scenarios …

Sensing And Measuring The Environment Workshop As Exposure To Engineering Technology For High School Students In A Summer Residential Camp, Vukica M. Jovanovic, Otilia Popescu, Murat Kuzlu, Mujde Erten-Unal, Balŝa Terzić, George Mcleod, Tysha Batts, Cynthia Tomovic

Engineering Technology Faculty Publications

Summer programs are the latest trend in extracurricular STEM education programs offered by universities. Efforts are made towards residential summer programs, which have the ability to expose students not only to specially designed STEM activities but to the university campus environment and student life, as well. These types of programs are expected to have better success in getting students engaged and to capture their interest in STEM fields. This paper presents one example of designing and implementing a summer residential workshop in order to expose high school students to the field of engineering technology, specifically to electrical circuits, electrical prototyping, …

Nsf S-Stem Project Update: A Pathway To Completion For Pursuing Engineering And Engineering Technology Degrees, Kim Bullington, Cynthia Tomovic, Vukica M. Jovanović, Anthony W. Dean, Rafael Landaeta

Engineering Technology Faculty Publications

This poster showcases the progress of students who are receiving scholarships from the National Science Foundation S-STEM project: A Pathway to Completion for Pursuing Engineering and Engineering Technology Degrees. Thus far, 20 academically high-achieving students who demonstrate financial need have participated in the project. Thirty-six scholarships have been awarded to date, in which a maximum of twelve scholarships are awarded per semester; some students have received scholarships multiple times. Students are from electrical engineering, computer engineering, mechanical engineering, civil engineering, civil engineering technology, and modeling and simulation majors. As part of this S-STEM project, students also receive academic support, mentorship …

Varying Class Schedules And Learning Effectiveness At Far Part 147 Aviation Maintenance Training Schools (Amts), Kristen Hammer

Student Works

Of the three learning styles, kinesthetic (hands-on) learning is the most common for individuals (Dinkel, 2011). This is especially relevant for people who work in technical, skill-based fields, such as aircraft maintenance. The hands-on learning style, coupled with a job that requires a great depth of systems knowledge, tool, equipment, and component manipulation, and a multitude of other physical job-related skills, requires that the student maximize his or her knowledge and skill retention while in training. The purpose of this research was to determine if FAR Part 147 Aviation Maintenance Technician School (AMTS) students would achieve more success, as measured …