Education Commons^™

اختيار التخصص الجامعي والرؤيا المستقبلية لدى الطلبة الجامعيين في فلسطين, Rashid Arar, Molka Riahi

Palestine Technical University Research Journal

The study aimed to identify the percentage of students enrolled in Palestinian universities obtaining services -at the secondary level, or university -that helped them identify their most appropriate university majors, as well as revealing their future vision for integrating into work after graduation, using the descriptive analytical approach. A random sample which consisted of (550) male and female students, (33%) of them males, and (67%) of them females from universities in the West Bank West Bank and Gaza Strip. Data was collected via Google forms. The results showed that (9%) of the Palestinian students in the school received services that …

The Water We Were Swimming In: Transgender And Gender Nonconforming Students' Lived Experiences In Engineering., Natalie Saroff Oliner

Electronic Theses and Dissertations

Few studies address the lived experiences of transgender and gender nonconforming (TGNC) students in engineering. Grounded in critical trans politics (Spade, 2015), this dissertation contributes to the literature on TGNC students in engineering by examining their experiences negotiating their identities while navigating interrelated systems of oppression in a field dominated by White, heterosexual, cisgender men. Using a critical constructivism framework, I conducted a narrative inquiry to explore the lived experiences of five TGNC students in engineering programs. Participants experienced TGNC oppression at their universities, built LGBTQ+ and TGNC communities, and described more welcoming climates in non-engineering contexts compared to engineering. …

Steam Explores Project Based Assessments, Erica Luvone, Loretta Radulic, Joe Mondanaro, Nicole Acevedo, Erika Dent, Ann Rhodes

STEM Month

This year, our approach to STEAM explores project based assessments in the disciplines of science and social studies. Students work in groups to produce projects that showcase work and proficiency. These projects are presented, displayed, discussed, and revisited or revised at student discretion.

Students Interest And Thoughts On Stem, Chrisitine Girtain

STEM Month

I am Juan Sebastian Bohorquez Mora, I am a sophomore student at Toms River High School North. I am interested in biofuels because I believe they are a good option to replace fossil fuels. I am also interested in duckweed because biofuels are made out of crops, and people need to eat those crops. That’s when duckweed comes in and it can be used as a feedstock for ethanol production which is a biofuel. Bioethanol is a type of biofuel and it is derived from the corn’s starch. Instead of making ethanol from the corn’s starch, we can use duckweed …

الأمن النفسي وعلاقته بالانتماء الوطني لدى طلبة جامعة القدس المفتوحة, Tamer Suheil

Palestine Technical University Research Journal

This study aims to find out the relationship between psychological security and national affiliation among of students for Al-Quds Open University. Also, it aims to identify some study variables like (gender, specialization and place of resi-dence(For achieving the study purpose, a questionnaire consists of (53) items distributed on two domains of psychological security with three axis of (life satisfaction, psychological ease and social stability) and national affiliation has been developed, distributed among (360) individuals who have been randomly cluster sample, gathered, codified, entered the computer and statically processed by using the Statistical Package of the Social Science (SPSS). Also, the …

Predicting Pair Success In A Pair Programming Eye Tracking Experiment Using Cross-Recurrence Quantification Analysis, Maureen M. Villamor, Maria Mercedes T. Rodrigo

Department of Information Systems & Computer Science Faculty Publications

Pair programming is a model of collaborative learning. It has become a well-known pedagogical practice in teaching introductory programming courses because of its potential benefits to students. This study aims to investigate pair patterns in the context of pair program tracing and debugging to determine what characterizes collaboration and how these patterns relate to success, where success is measured in terms of performance task scores. This research used eye-tracking methodologies and techniques such as cross-recurrence quantification analysis. The potential indicators for pair success were used to create a model for predicting pair success. Findings suggest that it is possible to …

Exploring The Impact Of Brexit On Uk’S Engineering Education Sector From The Perspective Of European Students And Staff, I. Direito, B. Williams, Shannon Chance

Conference papers

The UK higher education attracts a far higher number of international academics from all over the world, who teach and do research, than any other country in Europe, being only surpassed by Switzerland [1]. Moreover, because engineering itself is considered a global field, this sub-field of higher education also relies on international mobility more than most academic disciplines in the UK The impact of the United Kingdom European Union membership referendum of June 2016, commonly referenced as the Brexit referendum, is still unfolding and under continuing analysis. However, it is widely anticipated that it will disrupt European student and staff …

Stel Benchmark Verb Alignment To Cognitive, Affective, And Psychomotor Domains, T. Shown, Philip A. Reed

STEMPS Faculty Publications

(First paragraph) Curriculum developers and classroom teachers often need to make sure they are teaching and assessing students at the appropriate levels of the cognitive, affective, and psychomotor domains. The STEL benchmarks are written with active verbs to target different levels of these domains. In addition, curriculum developers and classroom teachers want to know whether the benchmarks are at the factual, conceptual, procedural, or metacognitive level of knowledge. The second resource being provided on ITEEA’s interactive STEL website will identify these factors for all 142 STEL benchmarks. This tool was developed to help insure the alignment of the three domains …

Mechatronics Education At Kettering University: Development Of Learning- Specific Hardware And Software, Jeffrey Hargrove, Theodore J. Stokes

Jeffrey Hargrove

A series of learning-specific electronic circuit boards and associated software has been developed to support mechatronics education in the Mechanical Engineering Department at Kettering University. The boards are designed to interface to the Toshiba TLCS-900H Microprocessor Trainer and Evaluation Board. The purpose of these boards is to provide mechanical engineering students of mechatronics with robust hardware that readily permits interfacing of sensors and actuators to microcontrollers used in mechatronic applications. Further, the boards feature signal conditioning circuits for use in conjunction with sensors, and driver circuits for operating high-current actuating devices. Supporting software has been written to permit ready use …

Engineering Students’ Perceptions Of Belongingness In Civil Engineering, Lisa Benson, Candice Bolding, Jennifer Harper Ogle, Catherine Mcgough Spence, Joseph Murphy, Rachel Lanning

Integrated Engineering Department Publications

Prior research shows that engineering students with low feelings of belongingness tend to switch to non-technical majors. With the understanding that aspects of student motivation, identity, and personality, as well as their academic performance, affect their sense of community in engineering, this study seeks to assess these student attributes over time. The context for this study is a single civil engineering program that is undergoing both curricular and cultural changes as part of an NSF-funded project. The data and findings presented here are part of a larger study of how student attitudes and beliefs change during their experiences in a …

Retention Of Female Faculty Members, Susan L. Murray, Mariesa Crow, Suzanna M. Rose

Suzanna Rose

The recruitment and the retention of female undergraduate and graduate students into engineering courses is discussed. A similar challenge lies in recruiting female faculty member from the limited pool of candidates in several fields at most universities. It is found that about half the females who were hired did not stay at the university. It is suggested that programs should be introduced to encourage mentoring and career development as such improvements would benefit all faculty members both female and male.

Growing Entrepreneurial Mindset In Interdisciplinary Student Engineers: Experiences Of A Project-Based Engineering Program, Elizabeth Pluskwik, Eleanor Leung, Andrew Lillesve

Integrated Engineering Department Publications

Engineering education models have recently embraced the entrepreneurial mindset as a desired outcome of undergraduate engineering education. Interdisciplinary active learning strategies have been suggested as an effective pedagogy for engaging student engineers in undergraduate engineering education. Recent research suggests that active, social learning in context can lead to improvements in learner innovation, problem-solving, curiosity, retention and accessibility of knowledge, value-creation, and other desired learning outcomes. Much of the recent adoption of active and collaborative learning, self-directed learning, problem-based and project-based learning (PBL), peer to peer learning, and other similar learning strategies are aimed at developing innovative and entrepreneurial mindset skills, …

The Rock 2018, School Of Engineering And Computer Science

The Rock

No abstract provided.

The Rock 2017, School Of Engineering And Computer Science

The Rock

No abstract provided.

Implementing Peer-Review Activities For Engineering Writing Assignments, Stacie I. Ringleb, Orlando M. Ayala, Jennifer Kidd

Mechanical & Aerospace Engineering Faculty Publications

Professional engineers spend a considerable portion of their day writing, yet disciplinary writing skills are not addressed in many engineering courses. This study investigates peer review as a mean to enhance student writing in engineering courses. Students completed formative peer reviews using an online peer review system for a group project in a fluid mechanics course (with online and face-to-face sections) and for an individual writing assignment in a senior capstone class in mechanical engineering. A university-wide rubric for disciplinary writing was used to assess student writing performance on interim and final assignments completed over the course of a semester. …

Manual Revision Process For Project-Based Laboratory Instruction, Gene Hou, Feifei Zhong, Orlando M. Ayala

Mechanical & Aerospace Engineering Faculty Publications

A four-step laboratory manual revision process was developed in this study based upon a technical writing process for supporting project-based laboratory classes. The audience and the objectives of this type of laboratory manuals are quite different from those of traditional, descriptive laboratory classes. The project-based laboratory manual has to serve as both an operational handbook and a theoretical textbook. The proposed four-step manual revision process was implemented in the fall 2016 semester in a 3-credit, senior elective class which was built upon a commercially-rated finite element analysis software package. Student surveys and evaluations showed that the revision process greatly increased …

Integrative Experiences Through Modeling And Simulation Of Mechatronic Systems, Mileta Tomovic, Cynthia Tomovic, Vukica M. Jovanovic, Cheng Y. Lin, Nan Yao, Petros J. Katsioloudis

Engineering Technology Faculty Publications

Learning is integrative lifelong process which requires continuous refreshing of old material and learning new material. This principle holds also for student experiences during their undergraduate studies. Students learn new material throughout their studies, and they may or may not have opportunity to use the material in different context and at different levels. As a result some of the acquired knowledge may be forgotten by the time student graduates or it may not be placed in the context of the overall program outcomes, thus material presented may not seem to have relevance to student's career. An effective method to address …

Developing A Faculty Learning Community To Support Writing Across Different Stem Disciplines, Vukica M. Jovanovic, Denise Tombolato-Terzic, Daniel P. Richards, Pilar Pazos, Megan Mckittrick, Julia Romberger, Otilia Popescu

Engineering Technology Faculty Publications

Writing to learn is one of the very important pedagogical strategies in a variety of disciplines. This concept is not specifically addressed in the majority of engineering courses. Hence, university initiatives such as the Quality Enhancement Plan (QEP), emerging out of accreditation and institutional assessments, are focusing on infusing scholarship from other disciplines (in this case English) for the purpose of student learning improvement. Engineering and Science programs do include various courses in English Composition as the part of the curriculum; however, writing is not embedded in all discipline-specific courses at the upper-division level. The program outlined here focuses on …

Applying Technology To Improve Student Learning Outcomes In Dynamics Course, Mileta Tomovic, Cynthia Tomovic, Vukica M. Jovanovic, Cheng Y. Lin, Nan Yao

Engineering Technology Faculty Publications

Motivating and stimulating students to learn material in required core engineering courses is difficult and yet essential in assuring student success. Traditional methods of teaching and learning need to be reconsidered and modified to meet student expectations and their continuously evolving ways of interaction with technology and social networks. Numerous faculty have been experimenting with various approaches which are taking advantages of both technology and student interaction with technology, with various degrees of success. In this paper authors present another comprehensive method applied in teaching/learning of core engineering mechanics course. It has been observed over a long period of time …

Flipped Classroom As Blended Learning In A Fluid Mechanics Course In Engineering Technology, Orlando M. Ayala, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Flipped classroom has gained attention in recent years as a teaching method in which the time allocated for introducing new concepts and the time used for practicing them are inverted, in order to provide more time for problem based learning and class interaction under direct supervision of the instructor. The implementation of this teaching method is comprised of two main components, the pre-class activities, which consist of individual student work and are largely based on pre-recorded videos, and in-class activities, which are group activities supervised by the instructor. This paper discusses the implementation of the flipped classroom method in a …

Scholar Week, James Upchurch

Scholar Week Archives (2011-2015)

ONU's Scholar Week #5.

Evaluation Of Static Vs. Dynamic Visualizations For Engineering Technology Students And Implications On Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred Jones

STEMPS Faculty Publications

The benefit of using static versus dynamic visualizations is a controversial one. Few studies have explored the effectiveness of static visualizations to those of dynamic visualizations, and the current state of the literature remains somewhat unclear. During the last decade there has been a lengthy debate about the opportunities for using animation in learning and instruction. More specifically it has been shown that dynamic visualizations often provide no advantages over static visualizations. If they had shown advantages, it was due to the fact that more information was available in the animated than in the static version. Given this result, the …

Design And Comparison Of Immersive Interactive Learning And Instructional Techniques For 3d Virtual Laboratories, Shuo Ren, Frederic D. Mckenzie, Sushil K. Chaturvedi, Ramamurthy Prabhakaran, Jaewan Yoon, Petros J. Katsioloudis, Hector Garcia

Computational Modeling & Simulation Engineering Faculty Publications

This work presents the design, development, and testing of 3D virtual laboratories for practice, specifically in undergraduate mechanical engineering laboratories. The 3D virtual laboratories, implemented under two virtual environments3DTV and Computer Automated Virtual Environment (CAVE)serve as pre-lab sessions performed before the actual physical laboratory experiment. The current study compares the influence of two instructional methods (conventional lecture-based and inquiry-based) under two virtual environments, and the results are compared with the pre-lab sessions using a traditional paper-based lab manual. Subsequently, the evaluation is done by conducting performance and quantitative assessments from students pre-and post-laboratory performances. The research results demonstrate that students …

Wikis For Group Work: Encouraging Transparency, Benchmarking And Feedback, Amir Abdekhodaee, Dini Kourosh, Farnaz Modarres, Anne-Marie Chase, Bella Ross

Dr Anne-Marie Chase

Scholar Week, Janna Mclean

Scholar Week Archives (2011-2015)

ONU's Scholar Week #4.

Improving Enrollment In The Construction Management Graduate Program Through Students’ Perspectives, Mouloud Messaoudi

Master of Technology Management Plan II Graduate Projects

Low enrollment and the decrease in graduation and retention rates are challenges facing the growth of the Master’s in Technology Management – Construction Management (MTM-CM) program at BGSU. In addition, the competition between the universities to enroll and retain more in-state, out-of-state, and international students is aggressive. There is a need for a revaluation for the MTM-CM program in order to attract more students in the future. This study is a necessary step to know what the MTM-CM students think about the product delivered to them at BGSU. There was no prior study investigating the satisfaction level of the construction …

Teaching Laboratory Courses Using Distance Learning Technologies, Steve C. Hsiung, John Ritz

Engineering Technology Faculty Publications

Conducting laboratory activities is essential for teaching and learning in engineering and technology subjects. This article discusses explorations made by a research team to find solutions to enable the distance-learning delivery of laboratory courses on embedded microcontroller technology topics. In addition, this article includes a review of videoconferencing and course management tools, uniquely designed laboratory equipment and supporting curriculum materials, and statistical evidence showing students can learn technical laboratory content in distance-learning environments.

Enabling Multidisciplinary Perspective In Student Design Project: Fast Fashion And Sustainable Manufacturing Systems, Vukica M. Jovanovic, Manveer Mann, Petros J. Katsioloudis, Daniel L. Dickerson

Engineering Technology Faculty Publications

Fast fashion retailers are growing faster than any other type of retailer due to their ability to offer trendy low-cost clothing mimicking latest runway trends with turnaround times as low as two weeks. Fueled by short production and distribution lead times, fast fashion retailers combine rapid prototyping, small batches of fashionable product designs, and efficient transportations and delivery. Among others, the methods applied in fast-fashion industry include mass customization and personalization, and lean manufacturing. Current trends in manufacturing lean towards the application of digital and rapid manufacturing methods and increased use of product lifecycle management, knowledge management systems and computer …

Strategies For Effective Online Course Development, Carol L. Considine, Michael W. Seek, Jon Lester

Engineering Technology Faculty Publications

Old Dominion University's Civil Engineering Technology (CET) program has a successful history of distance education, with more than half of the student population comprised of distance learners. Distance learning delivery has traditionally been via satellite and videostreaming with students having the choice of asynchronous or synchronous options. The university is in the process of updating their distance learning technologies and has encouraged programs to migrate to an online modality of distance learning. Developing and delivering online courses requires different competencies and facilitation skills than video streamed synchronous delivery or face to face instruction. A course delivered online changes the teaching …

Electronic Flashcards As A Tool To Improve Exam Readiness, Susan L. Murray, Julie Phelps

Engineering Management and Systems Engineering Faculty Research & Creative Works

Many college classes have basic information that must be learned before students can master the more complex application and analysis of advanced ideas in the class. Students often struggle with identifying and learning these facts, terms, and principles. This paper reports on a project that evaluated the use of electronic flashcards in two undergraduate engineering classes. The study materials (online flashcards) were developed in conjunction with the university's Educational Technology Office.