Education Commons^™

Impact Of Bioinspired Robots On Veterans Pursuing Stem Degrees, Otilia Popescu, Vukica M. Jovanovic, Krishnanand Kaipa, Karina Arcaute, Anthony W. Dean

Engineering Technology Faculty Publications

The gap in the area of advanced manufacturing skilled workforce and the efforts in guiding veterans towards STEM careers are merged in the NSF funded project presented in this paper. While most of the products and STEM educational programs focused on a maker concept that are currently available are specifically designed for young population, at various K-12 grade levels, to increase their interest in STEM and engineering careers in particular, there is a limited availability of such programs to address adult population. The study presented in this paper focuses on developing and implementing a series of workshops for veterans, using …

A Case Study Of A Stem Teacher’S Development Of Tpack In A Teacher Preparation Program, Mary C. Enderson, Ginger S. Watson

Teaching & Learning Faculty Publications

This case study involved researching pre-service secondary STEM teachers’ development of TPACK by use of modeling & simulation applications. The main research question focused on how do self-reported TPACK measures align with demonstrated TPACK knowledge and skills. The study design was qualitative and included five secondary STEM pre-service teachers who were completing their program of study and teaching lessons in the field with secondary students. This particular brief paper reports on one of the pre-service STEM teachers in this study. Coding and analysis were carried out to search for characteristics of tasks that support development of TPACK in future teachers. …

Elementary Preservice Teachers’ Perceptions Of Modeling As A Tool For Instruction, Ginger S. Watson, Mary Enderson

Teaching & Learning Faculty Publications

As the standards movement continues to gain momentum in U.S. schools, preservice and in-service teachers need greater knowledge in mathematical modeling to engage PK-12 students in such practices. This case-based research study investigated the perceptions and understandings of modeling for 76 entry-level, preservice elementary teachers enrolled in a mathematics methods course at a mid-Atlantic university. Participants were prompted to define modeling and its application to classroom instruction through open-response questions administered in an online survey. A case-based, phenomenological method was used to code and analyze responses. Most preservice teachers expressed a very limited definition or understanding of modeling or how …

Board 57: Identifying And Disseminating Transformative Professional Development Of Stem Undergraduates Who Perform Outreach: Progress In Year 1, Michael Alley, Joanna K. Garner

Center for Educational Partnerships Publications

To teach STEM content to K-12 students and to recruit talented and diverse K-12 students into STEM, many outreach programs at universities in the United States rely on STEM undergraduates. While the design of such outreach typically focuses on the K-12 students who are taught or recruited, an important but often overlooked consideration is the effect of the outreach on the professional development of the STEM undergraduates themselves. This proposed EAGER project seeks to determine which outreach programs in the United States provided the most transformative professional development of the participating STEM undergraduates. This project then seeks to capture the …

Board 57: Identifying And Disseminating Transformative Professional Development Of Stem Undergraduates Who Perform Outreach: Progress In Year 1, Michael Alley, Joanna K. Garner

Office of Research Faculty & Staff Publications

To teach STEM content to K-12 students and to recruit talented and diverse K-12 students into STEM, many outreach programs at universities in the United States rely on STEM undergraduates. While the design of such outreach typically focuses on the K-12 students who are taught or recruited, an important but often overlooked consideration is the effect of the outreach on the professional development of the STEM undergraduates themselves. This proposed EAGER project seeks to determine which outreach programs in the United States provided the most transformative professional development of the participating STEM undergraduates. This project then seeks to capture the …

Mathematics Teacher Educators' Exploring Self-Based Methodologies, Elizabeth Elizabeth, Signe E. Kastberg, Dana Cox, Jennifer Ward, Olive Chapman, Melva R. Grant

Teaching & Learning Faculty Publications

Historically underused methodologies in mathematics teacher education such as narrative inquiry, self-study, and autoethnography (i.e., self-based methodologies) are becoming a more frequent choice of mathematics teacher educators (MTEs). This has opened new challenges for MTEs as they try to disseminate their findings in mathematics education journals. Building from our working group at PME-NA 2018, we respond to the need for creating spaces (communities) where MTEs can feel supported in their study design, implementation, representation of findings, and publication using self-based methodologies. This year, we shift our focus from discussion to mentoring and scholarship on self-based methodologies. We invite MTEs with …

An Interdisciplinary Research-Based Education Program For Engaging Plant/Agriculture Sciences, Chemical Sciences, And Engineering Students (Irep-4-Pace) At Minority Institutions, Sharanabasaweshwara Asundi, Gregory C. Bernard, Willard E. Collier

Mechanical & Aerospace Engineering Faculty Publications

An interdisciplinary Research-based Education Program for Engaging Plant/Agriculture sciences, Chemical sciences and Engineering students (iREP-4-PACE) is envisioned with the underlying intent to improve Tuskegee University's (TU’s) STEM retention through the introduction of interdisciplinary, guided, inquiry experiments focused on the production of high-value chemicals from plants. At large, chemicals are synthesized from petroleum resources and it is well established that the continued extraction of these resources is detrimental to the environment. On the contrary, synthesizing chemicals from "plant factories" may be a boon to the environment and have a negative carbon …

Sustainability In Higher Education: Perceptions Of Social Responsibility Among University Students, Younghan Jung, Kayoung Park, Junyong Ahn

Engineering Technology Faculty Publications

Many construction-related training and education programs in the United States have now embraced the concept of sustainability, offering sustainable construction courses that highlight sustainable design and construction practices. These courses have mainly focused on green building strategies for the design and construction of built environments and indoor environmental quality necessary for students’ knowledge enhancement and career development. This study examined the effect of sustainability course on students’ knowledge as well as their perceptions of social responsibility and sustainable behaviors. Data were collected by conducting a survey from construction related programs in U.S. universities. Students were categorized based on their experience …

Exposing Students To Stem Careers Through Hands-On Activities With Drones And Robots, Vukica M. Jovanović, George Mcleod, Thomas E. Alberts, Cynthia Tomovic, Otilia Popescu, Tysha Batts, Ms. Mary Louise Sandy

Engineering Technology Faculty Publications

Autonomous robots have been used in a variety of ways from collecting specimen in hazardous environments to space exploration. These robots can be found in various manufacturing systems as Autonomous Guided Vehicles (AGVs) to transport parts and assemblies throughout the manufacturing system. They have also been used as a vehicle to convey design thinking and other STEM-related concepts in mechanical engineering/mechanical engineering technology, electrical engineering/electrical engineering technology, computer science, and computer engineering. Various outreach events have included robotics based activities that engage students in building and programming autonomous robots for the purpose of achieving a specific task. These events are …

Combining Different Motivation And Cognitive Supports In Undergraduate Biology In Different Contexts: Lessons Learned, Avi Kaplan, Jennifer G. Cromley, Tony Perez, Ting Dai, Kyle R. Mara, Michael Balsai

STEMPS Faculty Publications

Researchers acknowledge that students’ learning and achievement requires both effective cognition and the motivation to apply it. In addition, both cognition and motivation are multidimensional, each involving different processes that may be less or more salient in different contexts. However, most basic research and intervention studies focus on either cognition OR motivation, and commonly only target a single process. We designed an intervention to investigate the role of different combinations of cognitive and motivational supports in first-year undergraduate introductory biology courses. We sought an online delivery approach with minimal burden on the instructor that can accompany any such course. Building …

Question 1: Losing Weight; Question 2: Artificial Moon, Larry Weinstein

Physics Faculty Publications

The article presents questions related to Fermi which include mass lost by Sun over its lifetime; and size of artificial satellite needed to provide as much illumination as a full moon.

Science Identity Development Trajectories In A Gateway College Chemistry Course: Predictors And Relations To Achievement And Stem Pursuit, Kristy A. Robinson, Tony Perez, Justin H. Carmel, Lisa Linnenbrink-Garcia

STEMPS Faculty Publications

This investigation of undergraduates’ heterogeneous science identity trajectories within a gateway chemistry course identified three latent classes (High and Stable, Moderate and Slightly Increasing, Moderate and Declining) using growth mixture modeling. Underrepresented minorities were more likely to exhibit Moderate-and-Slightly-Increasing science identities versus High-and-Stable patterns. Students with higher perceived competence were more likely classified into the High-and-Stable class compared to the other classes. Students classified into the High-and-Stable class scored significantly higher on the final exam and appeared to be more likely to remain in a STEM major across fall and spring semesters compared to the other two classes. Results suggest …

Linear Difference Equations: Integrated- Environmentalist Approach For Teaching Mathematics, John A. Adam

Mathematics & Statistics Faculty Publications

There are at least eight known approaches for teaching mathematics that have been described in the literature. These include the Integrated Environmentalist, Formative, Social-Constructivist, Structuralist, New Maths, Problem Solving, Cultural, and Behaviorist approaches (Neyland, 1995). This paper presents some examples for teaching mathematics using the Integrated-Environmentalist approach, which is based on the assumption that the content knowledge in mathematics cannot be separated from the meaningful context from which it is taken, and in which it can be explained. In this approach for teaching mathematics the environment is used as the main source of mathematical meaning, stimulation to do creative work …

How Can Career Switchers And Teachers Without Formal Training Be Quickly Prepared To Teach Engineering And Technology Education?, Kathleen Ferguson, Philip A. Reed

STEMPS Faculty Publications

Old Dominion University (ODU) provides a six-hour, hands on workshop to train technology education teachers in design-based learning, production laboratory safety, and laboratory management. The teachers are provided with information about technology education content and pedagogy as well as safety contracts, legal liability, and machine use and maintenance. Teachers in this workshop learn (or update) important laboratory safety procedures and tool skills through instruction, demonstrations, and an active learning project.

The workshop is co-hosted by the ODU Technology Education Program and the Virginia Technology and Engineering Education Association (VTEEA). Three workshops have been held and program interest is increasing. The …

Analysis Of Blended And Multi-Modal Instruction And Its Effects On Spatial Visualization Ability, Diana Bairaktarova, Daron Williams, Petros Katsioloudis

STEMPS Faculty Publications

For the last decade, remedial spatial visualization training has been offered to first-year engineering students in traditional classroom settings where students attend class and interact face-to-face with an instructor and peers. An alternative to the traditional pedagogical approach is a multi-modal blended learning format that combines in-class instruction with videos that can be viewed at the student’s convenience. The new setting affords students the opportunity to repeatedly revisit the basic instruction at the time and place of their choosing. This case study investigated student outcomes in a blended multi-modal Introduction to Spatial Visualization course that integrated video lectures; free-hand sketching …

Factors Contributing To Student Retention In Online Learning And Recommended Strategies For Improvement: A Systematic Literature Review, Pauline S. Muljana, Tian Luo

STEMPS Faculty Publications

Aim/Purpose

This systematic literature review investigates the underlying factors that influence the gap between the popularity of online learning and its completion rate. The review scope within this paper includes an observation of possible causal aspects within the non-ideal completion rates in online learning environments and an identification of recommended strategies to increase retention rates.

Background

While online learning is increasingly popular, and the number of online students is steadily growing, student retention rates are significantly lower than those in the traditional environment. Despite the multitude of studies, many institutions are still searching for solutions for this matter.

Methodology

A …

Project-/Problem-Based Learning In Stem: Impacts On Student Learning, William D. Euefueno

STEMPS Faculty Publications

The article discusses the impacts of STEM project-/problem-based learning (PBL) on students. Topics includes prototyping as a key transition element for PBL process which develop self-efficacy individually; use of PBL as a dynamic learning process, allows learners to gain experiences with real-world applicability; and PBL skillsets that requires students to use critical-thinking processes. It mentions that PBL's goal is to make behavioral changes by long term training.

Welcome To Normalton: Leveraging Effective E-Learning Principles For Adult Learners, Robert L. Moore

STEMPS Faculty Publications

This design case details the critical design decisions used in the development of an e-learning module library for North Carolina local government officials focused on land use regulations. These modules cover topics from an introduction to land use regulations, to evidentiary hearing conduct guidelines, defining vested rights, and explaining how to adopt and amend an ordinance. This project was in response to the North Carolina League of Municipalities (NCLM) members’ increased requests for training in this subject area. This organization requested the assistance of the two faculty members at the University of North Carolina at Chapel Hill School of Government …

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).

Science Expectancy, Value, And Cost Profiles And Their Proximal And Distal Relations To Undergraduate Science, Technology, Engineering, And Math Persistence, Tony Perez, Stephanie V. Wormington, Michael M. Barger, Rochelle D. Schwartz-Bloom, You-Kyung Lee, Lisa Linnenbrink-Garcia

Educational Foundations & Leadership Faculty Publications

Despite efforts to attract and maintain diverse students in the science, technology, engineering, and math (STEM) pipeline, issues with attrition from undergraduate STEM majors persist. The aim of this study was to examine how undergraduate science students’ competence beliefs, task values, and perceived costs in science combine into motivational profiles and to consider how such profiles relate to short-term and long-term persistence outcomes in STEM. We also examined the relations between underrepresented group membership and profile membership. Using latent profile analysis, we identified three profiles that characterized 600 participants’ motivation during their first semester in college: Moderate All, Very …

Combined Srl-Based Cognitive-Motivational Modules Increase Undergraduate Biology Grades, Jennifer G. Cromley, Tony Perez, Avi Kaplan, Ting Dai, Kyle Mara, Michael J. Balsai

STEMPS Faculty Publications

Students’ success in undergraduate STEM courses requires effective study strategies, but also the motivation to enact them, drawing on two key tenets of Self-Regulated Learning. Interventions designed to promote students’ achievement and retention in STEM have commonly focused on either cognition or motivation. Building on Pintrich’s (2000) SRL framework, we iteratively-developed and tested the effect of different combinations of one of four cognition-focused with one of three motivation-focused intervention modules. Initial development took place in 2015-2016 and post-iterative experiments occurred in 2017. Participants were 3,092 undergraduate introductory biology students tested in 10 studies at 3 universities over 4 academic years. …

Improving Stem Recruitment Through A Theme-Based Summer Residential Camp Focused On Sea Level Rise, Vukica M. Jovanović, Balša Terzić, Mujde Erten-Unal, Victoria Hill, George Mcleod, Michelle Covi, David Burdige, Jenifer Alonzo, Justin Mason, Tysha Batts, Cynthia Tomovic

Engineering Technology Faculty Publications

In this paper, the authors present an enrichment program that focuses on Science, Technology, Engineering, and Math (STEM) concepts. The program is named Building Leaders to Advance Science and Technology (BLAST) and is held each summer at three universities across the Commonwealth of Virginia: Old Dominion University, the University of Virginia, and the Virginia Polytechnic Institute. BLAST is sponsored in partnership among these three universities and the Virginia Space Grant Consortium (VSGC), and is funded by the General Assembly of Commonwealth of Virginia. Its main purpose is to expose high school students to topics related to different STEM fields through …