Education Commons^™

Integration Of Omnet++ Into A Networking Course In An Electrical Engineering Technology Program, Murat Kuzlu, Brian Emmanuel Tamayo, Salih Sarp, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Networking courses are an integral part of electrical engineering technology programs as the majority of electronics in the modern day are required to communicate with each other. They are also getting more attention in manufacturing engineering technology programs because of the development of emerging technologies in Industry 4.0 arena. From laptops, computers, cellphones, modern day vehicles and smart refrigerators, these devices require a certain level of networking in order to communicate with other devices, whether it be locally, or even across the other side of the world. The objective of networking courses in an electrical engineering program is to demonstrate …

Enhancing Online Hands-On Learning In Engineering Education: Student Perceptions And Recommendations, Dalya Ismael

Engineering Technology Faculty Publications

Designing effective online engineering courses that include hands-on components or labs requires a thorough understanding of student perspectives and the development of strategies to improve learning outcomes. Despite the growing number of studies on online learning, little information exists on the unique challenges engineering students face in hands-on courses. To address this gap, this study used a questionnaire to gather engineering students’ perspectives on course design and delivery. The findings highlight the challenges faced by students in online engineering courses with hands-on components, such as difficulty in collaborating with peers. To address these challenges, recommendations are proposed, such as incorporating …

Digital Educational Modules Development For The Career And Technical Cybersecurity Pathways During The Covid-19 Pandemic, Vukica Jovanović, Murat Kuzlu, Otilia Popescu, Petros Katsioloudis, Linda Vahala, Michael Wu, Deborah Marshall, Michael Crespo, Mary Addison

Engineering Technology Faculty Publications

Virtual learning has been used now for several decades, but it has never had a bigger impact on student learning than in the era of the COVID-19 pandemic. Universities and schools faced shutdowns all around the world, and teachers had to adapt rapidly to online mode of instruction. Many educators were faced with a triage approach with no previous experience in distance learning, a lack of resources for professional development, and already existing shortages of current educational modules that could assist them in their day-to-day jobs. This gap was especially evident in areas such as career and technical education (CTE) …

Teaching In The Times Of Pandemic, Mileta Tomovic, Cynthia Tomovic

Engineering Technology Faculty Publications

The changes in academia are typically slow but very purposeful, they are carefully reviewed and strategically implemented, that is, until unpredictable massive tectonic shifts occur in society. Historically, academia has not experienced major distress on a global scale that would require a fundamental change and adaptation to new set of circumstances, until the world faced COVID-19 pandemic of proportions which caused academia to rapidly adjust to new realities and make major changes. The time frame in which the changes needed to be done, weeks and months, were so short that academia was placed under the significant stress to which it …

Pedagogical Methods And Advances For Synchronous/Asynchronous Instruction Of Laboratories In Engineering Technology Programs, Nestor Escobales, Alok Verma

Engineering Technology Faculty Publications

Significant research has been done on the subject of distance learning (DL) instruction for many academic disciplines. However, when it comes to engineering technology (ET) programs, particularly, engineering laboratory work, limited studies are available. It is unquestionable that engineering laboratory work is essential for the successful preparation of individuals enrolled in ET programs. The focus of ET programs is on the correct use and application of engineering principles with a direct focus on practical application rather than on theory alone. The difficulties increase significantly when laboratories are offered in DL mode, particularly for ET programs. It is well known that …

Embedding Online Based Learning Strategies Into The Engineering Technology Curriculum, Vukica M. Jovanovic, Otilia Popescu, Orlando M. Ayala, Mileta Tomovic, Alok K. Verma

Engineering Technology Faculty Publications

Various blended learning strategies have been implemented at engineering technology programs to facilitate different learning styles and different time constraints given to faculty. Some of these efforts are related to the effective use of online tools such as online course management systems, ePortfolios, narrated presentations, web-based polling systems, tutorials and educational materials posted before the class and asynchronous learning methods. As technology changes, some of the online learning methods are getting more advanced which is enabling more innovative approaches and data compression. Various distance learning programs started with having access to videos of recorded lectures (on VHS tapes, or CDs) …

Teaching Laboratory Courses Using Distance Learning Technologies, Steve C. Hsiung, John Ritz

Engineering Technology Faculty Publications

Conducting laboratory activities is essential for teaching and learning in engineering and technology subjects. This article discusses explorations made by a research team to find solutions to enable the distance-learning delivery of laboratory courses on embedded microcontroller technology topics. In addition, this article includes a review of videoconferencing and course management tools, uniquely designed laboratory equipment and supporting curriculum materials, and statistical evidence showing students can learn technical laboratory content in distance-learning environments.

Strategies For Effective Online Course Development, Carol L. Considine, Michael W. Seek, Jon Lester

Engineering Technology Faculty Publications

Old Dominion University's Civil Engineering Technology (CET) program has a successful history of distance education, with more than half of the student population comprised of distance learners. Distance learning delivery has traditionally been via satellite and videostreaming with students having the choice of asynchronous or synchronous options. The university is in the process of updating their distance learning technologies and has encouraged programs to migrate to an online modality of distance learning. Developing and delivering online courses requires different competencies and facilitation skills than video streamed synchronous delivery or face to face instruction. A course delivered online changes the teaching …

Delivery Of Hands-On Technical Courses Through Real-Time Distance Learning, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Feng Jao

Engineering Technology Faculty Publications

It is generally believed that it is too challenging to deliver technical laboratory courses using distance learning technologies. The focus of this research was to develop strategies that may be used to address these challenges. A research team composed of faculty from several universities and community colleges explored what might be needed to make these types of technical laboratory course instruction possible using distance learning technologies. The team explored delivering a microcontroller embedded systems design course through audio-visual distance learning technologies. The team's research and development activities are discussed. These include focuses on the technical training equipment that had to …

A Comparison Of Instructional Delivery Methods Based On Student Evaluation Data, John Hackworth, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

Distance Education is an increasingly common educational delivery method. At Old Dominion University, all junior and senior level engineering technology courses are offered via distance education at least once every two years. A majority of courses in the distance education system at this university have three simultaneous delivery methods: on-campus, televised (receiving the course at an off-campus site via satellite video/audio), and internet-based video-streamed.

This paper explores the results of student course evaluation surveys for trends, in particular those trends which can be a result of the mode of delivery. Results of these surveys for 23 courses over a 4-year …

Design And Develop A Cost Effective Microcontroller Training System For Distance Learning Engineering Students, Steve Hsiung, John Ritz, James Eiland

Engineering Technology Faculty Publications

This is the review of a NSF funded project that addresses the hands-on distance learning needs in microprocessor/microcontroller related courses. A research team designed a low cost training system with supporting instructional materials to assist the teaching of these concepts. Individual laboratory activities are being developed to reinforce student learning and skill development in programming concepts. This basic system format eventually will support an array of technology courses. This project involves two community colleges, Blue Ridge Community College (BRCC), VA and Olympic College (OC), WA, and a four-year university, Old Dominion University (ODU), VA, in a collaborative research team to …

A General Engineering Technology Program In Motorsports Technology, Gary Crossman, Anthony Dean

Engineering Technology Faculty Publications

Southside Virginia, in particular the cities of Danville, Martinsville and the surrounding area, is the home of Virginia International Raceway and a rapidly growing motorsports industry. There is a strong need for educational opportunities to support manufacturing and related industries in this region. In the early 2000’s Patrick Henry Community College in Martinsville established an associate of applied science degree in Motorsports Technology to help meet the need for technical support personnel. As the industry has grown it has become evident that engineers and technologists are needed at the baccalaureate and masters levels. Old Dominion University (ODU), located in Norfolk, …

Managing A Distance-Learning Eet Laboratory Course Using Collaboration Software, Steve Hsiung, John Hackworth, Richard Jones, June Ritchie

Engineering Technology Faculty Publications

Methods of managing various distance learning EET laboratory courses using collaboration software are detailed. Particular emphasis is given to different types of collaboration software, advantages and disadvantages of each, and student and faculty feedback on the effectiveness of each.

A Hybrid Course In Fundamentals Of Building Construction Using Combination Archived Video And Live Session Distance Learning, Vernon W. Lewis Jr., Carol L. Considine, June Ritchie

Engineering Technology Faculty Publications

A course in the Fundamentals of Building Construction has been a curricular requirement of the Civil Engineering Technology Program (CET) since its inception. This course was taught traditionally as an on-campus class. Over the last ten years, the CET program has expanded to contain an extensive distance learning component, with at least half of the enrollment located off campus. The model for the typical distance-learning class is to meet for three hours, once a week, with a fully interactive (voice) live class. In consideration of the demand of a growing distance learning system, it was decided to restructure this class …

The Administration Of Senior Design Projects In A Distance Learning Environment, Isaac L. Flory Iv, John R. Hackworth

Engineering Technology Faculty Publications

A method for administering a senior level capstone design course in Electrical Engineering Technology in a distance learning environment is described. Several avenues are explored that help the students successfully conceive, develop, and present their design projects from off- campus locations that are consistent with the requirements placed upon their on-campus peers. Several problems that are unique to offering a senior project course in a distance learning environment are explored and solutions are described.

Lessons Learned And Best Practices For Using An Analytic Strategy Approach For The Creation Of Virtual Laboratories For Distance Learning In Engineering Technology, Anthony W. Dean, Carol L. Considine, Gary R. Crossman

Engineering Technology Faculty Publications

This paper describes the use of an Analytic Strategy Approach used in the development of a Virtual Automation and Controls Lab in the Mechanical Engineering Technology Program of the Engineering Technology Department at Old Dominion University. This paper looks at the three phases, as applied to the development of a virtual lab using an analytic strategy design:

(1) Formulation of the quantitative and qualitative approach to assist in decision process,

(2) Quantitative and qualitative analysis of the decision alternatives - within the decision context,

(3) Interpretation of the analysis results and implications for decision.

Assessment Methods For Comparison Of On-Camps And Distance Learning Laboratory Courses In An Engineering Technology Program, John R. Hackworth, Richard L. Jones

Engineering Technology Faculty Publications

Assessment methodology and results for two Electrical Engineering Technology laboratory courses are shown. In these cases, courses are offered in both the traditional on- campus and non-traditional distance learning format, assessment methods are prescribed, assessment data are taken, and the results compiled and compared. Student comments are included which also support the assessment data. In addition, this paper describes ways in which the laboratory courses are structured in order to make the assessment process easier to manage. Pedagogical issues are addressed that were encountered when constructing the distance learning laboratory courses to assure that the learning experience could equal or …

Active Learning In Distance Education, Carol Considine, Tony Dean

Engineering Technology Faculty Publications

Although there are many strategies for incorporating active learning exercises into the traditional classroom, incorporating active learning exercises in a distance education delivery format is more challenging. Active learning has been shown to enhance student performance and attitudes when used in conjunction with a traditional lecture format.¹ In order for students to be actively involved they must read, write, discuss, problem solve and engage higher-order thinking tasks such as analysis, synthesis, and evaluation.² The implementation of active learning exercises in distance education classes may help establish student rapport and enhance the feeling of community among the students in …