Education Commons^™

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

R. Eric Landrum

Design Practices Of Preservice Elementary Teachers In An Integrated Engineering And Literature Experience, Kristen Bethke Wendell

Journal of Pre-College Engineering Education Research (J-PEER)

The incorporation of engineering practices and core ideas into the Next Generation Science Standards at the elementary school level provides exciting opportunities but also raises important questions about the preparation of new elementary teachers. Both the teacher education and engineering education communities have a limited literature base on the resources that novice elementary teachers bring to learning and teaching engineering. The purpose of this descriptive exploratory research study was to characterize the design practices used by preservice elementary teachers during an integrated engineering and literature experience. Using a modification of the Design Activity Coding Scheme (Atman et al., 2007), we …

High And Low Computer Self-Efficacy Groups And Their Learning Behavior From Self-Regulated Learning Perspective While Engaged In Interactive Learning Modules, Harry B. Santoso, Oenardi Lawanto, Kurt Becker, Ning Fang, Edward M. Reeve

Journal of Pre-College Engineering Education Research (J-PEER)

The purpose of this research was to investigate high school students’ computer self-efficacy (CSE) and learning behavior in a selfregulated learning (SRL) framework while utilizing an interactive learning module. The researcher hypothesizes that CSE is reflected on cognitive actions and metacognitive strategies while the students are engaged with interactive learning modules. Two research questions guided this research: (1) how is students’ CSE while engaged in interactive learning modules? and (2) how do high and low CSE groups plan and monitor their cognitive action, and regulate their monitoring strategies based on their CSE level? The research used a mixedmethods approach to …

Gender Differences In The Consistency Of Middle School Students’ Interest In Engineering And Science Careers, Marsha Ing, Pamela R. Aschbacher, Sherry M. Tsai

Journal of Pre-College Engineering Education Research (J-PEER)

This longitudinal study analyzes survey responses in seventh, eighth, and ninth grade from diverse public school students (n = 482) to explore gender differences in engineering and science career preferences. Females were far more likely to express interest in a science career (31%) than an engineering career (13%), while the reverse was true for males (58% in engineering, 39% in science). After controlling for student and school demographic characteristics, females were as consistent as males in their science career interests during the three years of the study but less consistent in their engineering career interests. Knowing an engineer significantly …

A Whole New Engineer, David Goldberg, Mark Somerville

Mark Somerville

A Revolution Is Coming. It Isn’t What You Think. This book tells the improbable stories of Franklin W. Olin College of Engineering and the iFoundry incubator at the University of Illinois. That either one survived is story enough, but what they found out together changes the course of education transformation forever: How trust is key to unleashing young, courageous engineers. How engineers need to move from a narrow technical education to one that actively engages six minds. How emotion and culture–not content, curriculum & pedagogy–are the crucial elements of change. How all stakeholders can collaborate to disrupt the status quo.status …

Using Design Hierarchy In A Linear Circuits Class To Illustrate The Scientific Method As A Human Invention, Douglas Deboer

Faculty Work Comprehensive List

There are various ways to classify academic studies. One might make a “two cultures” division, separating academic studies into the humanities and sciences. Or one might have three divisions: humanities, social sciences, and natural sciences. Or one might choose to classify academic studies along the lines of traditional academic disciplines such as theology, law, art, music, economics, social studies, languages, political studies, history, psychology, biology, physics, chemistry, math, etc. In our era of global commerce, where does engineering fit in these types of classification? What should engineers study? In a 2008 presidential debate, candidate Barack Obama said that, “Ensuring that …

Leveraging Students’ Passion And Creativity: Ethos At The University Of Dayton, Margaret Pinnell, Malcolm Daniels, Kevin P. Hallinan, Gretchen Berkemeier

Mechanical and Aerospace Engineering Faculty Publications

The Engineers in Technical Humanitarian Opportunities of Service-learning (ETHOS) program was developed in the spring of 2001 by an interdisciplinary group (electrical, chemical, civil and mechanical) of undergraduate engineering students at the University of Dayton (UD). ETHOS was founded on the belief that engineers are more apt and capable to appropriately serve our world if they have an understanding of technology’s global linkage with values, culture, society, politics, and the economy. Since 2001, the ETHOS program at UD has grown and changed.

From conceptualization, to implementation, to maturation and national recognition, the program has addressed challenges of academic acceptance, programmatic …

Engineering Design: A Cognitive Process Approach, Greg Joseph Strimel

STEMPS Theses & Dissertations

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. …

Integrating Cognitive Science With Innovative Teaching In Stem Disciplines, Mark A. Mcdaniel, Regina F. Frey, Susan M. Fitzpatrick, Henry L. Roediger Iii

Books and Monographs

This volume collects the ideas and insights discussed at a novel conference, the Integrating Cognitive Science with Innovative Teaching in STEM Disciplines Conference, which was held September 27-28, 2012 at Washington University in St. Louis. With funding from the James S. McDonnell Foundation, the conference was hosted by Washington University’s Center for Integrative Research on Cognition, Learning, and Education (CIRCLE), a center established in 2011. Available for download as a PDF. Titles of individual chapters can be found at http://openscholarship.wustl.edu/circle_book/.

20140827.5: Engineering Office, 1952-1971, College Of Information Technology And Engineering

Guides to University Archives

These items include materials from the College of Information Technology and Engineering at Marshall University from 1952-1971. Items were received in 2014 and include notable materials about the history of Engineering at Marshall, including training for engineering students, library holdings, the Engineering curriculum report from 1962, samples of student work within Engineering, and the Citizens Committee for presentation and improvement of Engineering from 1972. This is not an exhaustive list. Please download the finding aid for a full list of contents.

Improving Engineering Work And Study, Daniel Edwards, Jacob Pearce

Dr Daniel Edwards

Daniel Edwards and Jacob Pearce discuss a study that explores the perceptions of the engineering workforce, including engineering education and barriers to participation and career advancement.

Visualizing Mechanics: Educational Videos Demonstrating Core Mechanics Concepts, Camilo Schrader, Jeffrey Rhoads, Charles M. Krousgrill, Stephen Alex Stamm, Elizabeth Bushman

The Summer Undergraduate Research Fellowship (SURF) Symposium

There has been an increased interest in using technology to relay information over the past 20 years. This interest has been reflected in the way the internet has expanded to incorporate nearly-uncountable numbers of blogs, streaming videos, and discussion forums. Recent research has shown that younger generations of students prefer internet-based platforms such as these to communicate and learn, as they are congruent with a visual style of learning. The present study seeks to fuse the predominantly reflective and intuitive methods found in a traditional lecture with the more visual and active modes of learning to provide a larger range …

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Dr Daniel Edwards

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Dr Justin Brown

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Flipped Technological Training And Development Using Quality Systems Management In The Public Services Field, Dustin Bessette, Sharon Burton, Maurice Dawson

Maurice Dawson

Training and development is ideal for businesses process improvements in many public service fields. Education, development, and training tools are not new concepts, but are ideal, crucial, and responsive in the central utilization of employee training systems for public service fields. The need for public workforce has increased and demanded accelerated technological training and development process that have positive value and achievable gains. One method to surge this problem is to flip the technological training and development tools that have been issued and over used in the past. These tools not only hold back vicious potential from employees, but employees …

Ethical Reasoning Development In Project-Based Learning, Elizabeth Pluskwik, Puteri S. Megat Hamari

Integrated Engineering Department Publications

This paper will describe the method of ethics instruction in a specific project-based learning program with the aim to improve the current level of moral reasoning skills in the engineering students enrolled in the program. The Accreditation Board for Engineering and Technology (ABET) and the National Society of Professional Engineers (NSPE) have endorsed efforts to improve the teaching of ethics in the engineering curriculum. Criterion 3-f of the ABET outcomes,specifically calls for student attainment of an understanding of ethical and professional responsibility. In response, engineering educators seek to develop curriculum to improve moral reasoning skills, which should lead to increased …

Large Research Center Education And Outreach: Lessons From 5 Years Of Distributed Collaborative Design, Development And Implementation, Sean Brophy, Thalia Anagnos

Faculty Publications

Paper from the 121st ASEE Annual Conference, Indianapolis. The George E. Brown, Jr. Network for Earthquake Engineering Summation (NEES) completes its tenth year of operation in September 2014. The NEES Center consists of a network of 14 large-scale experimental laboratories that collaborate and share resources in support of research to inform civil engineering practice and reduce losses from future earthquakes. Since the development of the center in 2003, the education, outreach and training (EOT) program has grown from a federation of local outreach activities to an integrated network of “specialists” working together to obtain significant impact towards defined education goals. …

Creating A Stem Identity: Investment With Return, Janet Callahan, Patricia Pyke, Susan Shadle, R. Eric Landrum

Materials Science and Engineering Faculty Publications and Presentations

Establishing a strong STEM (science, technology, engineering and mathematics) identity at Boise State University, a metropolitan campus with approximately 3,655 undergraduate STEM students and a total undergraduate enrollment of approximately 19,042 (16,136 FTE) has been an important step toward creating a climate conducive to facilitating fundamental change. Examples of such change include building collaborations among faculty within and across departments, establishing the identity of students as part of a community beyond their chosen major, improving the efficiency and effectiveness of university systems, and perhaps most importantly, developing a framework to think deliberately about ways to effect change. This paper is …

Olin College: Re-Visioning Undergraduate Engineering Education, Lynn Stein, Mark Somerville, Jessica Townsend, Vincent Manno

Jessica Townsend

The Franklin W. Olin College of Engineering was created to address several perceived needs for engineering graduates of the future and to be an experimental laboratory for engineering education. As such, Olin College is not only dedicated to innovation within its boundaries but also to catalyzing change throughout the engineering enterprise. The curriculum aims to support life-long learning, teamwork, communication, and contextual understanding, along with rigorous quantitative and qualitative skills.

Olin College: Re-Visioning Undergraduate Engineering Education, Lynn Stein, Mark Somerville, Jessica Townsend, Vincent Manno

Vincent P. Manno

The Franklin W. Olin College of Engineering was created to address several perceived needs for engineering graduates of the future and to be an experimental laboratory for engineering education. As such, Olin College is not only dedicated to innovation within its boundaries but also to catalyzing change throughout the engineering enterprise. The curriculum aims to support life-long learning, teamwork, communication, and contextual understanding, along with rigorous quantitative and qualitative skills.

Olin College: Re-Visioning Undergraduate Engineering Education, Lynn Stein, Mark Somerville, Jessica Townsend, Vincent Manno

Lynn Andrea Stein

The Franklin W. Olin College of Engineering was created to address several perceived needs for engineering graduates of the future and to be an experimental laboratory for engineering education. As such, Olin College is not only dedicated to innovation within its boundaries but also to catalyzing change throughout the engineering enterprise. The curriculum aims to support life-long learning, teamwork, communication, and contextual understanding, along with rigorous quantitative and qualitative skills.

Olin College: Re-Visioning Undergraduate Engineering Education, Lynn Stein, Mark Somerville, Jessica Townsend, Vincent Manno

Mark Somerville

The Franklin W. Olin College of Engineering was created to address several perceived needs for engineering graduates of the future and to be an experimental laboratory for engineering education. As such, Olin College is not only dedicated to innovation within its boundaries but also to catalyzing change throughout the engineering enterprise. The curriculum aims to support life-long learning, teamwork, communication, and contextual understanding, along with rigorous quantitative and qualitative skills.

Exploring The Factors That Influence And Motivate Female Students To Enroll And Persist In Collegiate Stem Degree Programs: A Mixed Methods Study, Rosemary L. Edzie

Rosemary L Edzie

Nationally, the need for an increase in interest, enrollment, and degrees awarded from science, technology, engineering and mathematics (STEM) degree programs continues to suffer. While students are enrolling in collegiate STEM degree programs, it is not occurring at a rate that meets the workforce demand. In addition to the concern that there is not a sufficient amount of collegiate STEM majors, there is a concern over too few females enrolling and persisting in collegiate STEM degree programs. This mixed methods sequential exploratory research study considered the factors that influence and motivate undergraduate female students to enroll and persist in collegiate …

Focus Groups For Informing Awpa’S Engineering Workforce Study 2014: Final Report, Daniel Edwards, Jacob Pearce, Kate Perkins, Justin Brown

Higher education research

This report highlights the findings of a project undertaken by the Australian Council for Educational Research (ACER) for the Australian Workplace and Productivity Agency (AWPA) that will contribute to a wider study of the Engineering Workforce. The project involved the development, coordination, implementation of focus groups and the reporting of outcomes in a way that generates first-hand information about the experiences and attitudes of specific groups of people in relation to the engineering labour market – women, mature-age workers and new graduates. The work here also explored the views of the next generation of engineers, gathering information from school students …

Leveraging Scholarships To Advance Student Success, Jared Tuberty, Thalia Anagnos, Emily L. Allen

Thalia Anagnos

As college costs rise, students and their families continually look for ways to pay for an undergraduate education. Increased financial pressures have forced some students to work additional hours in part-time or even full-time employment. As a result, time to degree can be extended as students tackle fewer units per term or as they repeat courses, struggling to balance work and school. Scholarship funding is one mechanism to help support students, but providing financial relief is not enough. Scholarship recipients face many of the same challenges as all students, in that some find themselves struggling as they transition to college …

An Initial Look At Robotics-Based Initiatives To Engage Girls In Engineering, Jennifer Michaeli, Vukica Jovanovic, Otilia Popescu, Ana Djuric, Ece Yaprak

Engineering Technology Faculty Publications

Over the past 10 years, the use of robotic kits in K-12 Science, Technology, Engineering, and Math (STEM) initiatives as well as undergraduate engineering education has increased significantly. However, a survey of students in grades 9–12 indicated that only 2–3% of women in high school express an intention to study engineering; conversely, 16% of high school men declared that they plan to pursue an engineering degree [1]. In this paper, the authors present an initial review of published literature regarding the use of robotics in schools to identify cases where robotic kits have been used to engage girls in STEM …

Spatial Visualization Ability And Impact Of Drafting Models: A Quasi Experimental Study, Petros J. Katsioloudis, Vukica Jovanovic

STEMPS Faculty Publications

A quasi experimental study was done to determine significant positive effects among three different types of visual models and to identify whether any individual type or combination contributed towards a positive increase of spatial visualization ability for students in engineering technology courses. In particular, the study compared the use of different visual models - a 3D printed solid object, a 3D computer generated drawing and a 2D drawing.

Epics: Broadening The Pathway Into Stem, Mindy Hart, Patrice M. Buzzanell, William Charles Oakes, Carla B Zoltowski

ADVANCE-Purdue Gender and STEM Research Symposium

The Engineering Projects in Community Service (EPICS) program was co-founded at Purdue University in 1995 and has since spread throughout the United States and globally with inroads into K-12 education through EPICS High. This presentation offers a synthesis of research findings and interventions gleaned from several datasets about students’ and alumni’s reported experiences with EPICS and the consequences of their participation. In particular, this presentation discusses the ways in which EPICS provides a different vantage point on the underrepresentation of women in STEM (science, technology, engineering, and math). Specifically, researchers have been tackling this issue of underrepresentation for decades with …

Two Bit Circus, Elise Lemle

The STEAM Journal

Two Bit Circus collaborated with the Girl Scouts of the Greater Los Angeles Area to explore the exciting world of wearable electronics. Over the course of the program, the students explored concepts of introductory electronics while designing and creating their own illuminated fashion piece. The program was held in Montrose, CA in Fall 2013. The students were approximately 10 girls ages seven to 14. The program was held over seven sessions with each session lasting 80 minutes.

Wrinkling In Buckling And A Thin Sheet, Narayanan Menon

Patterns Around Us

Module 1: Euler Buckling

Learning Objectives:

• What is an instability? A sudden change in behaviour in response to a small change in conditions.

• Instabilities usually involve a change in symmetry from a more symmetric situation to a less symmetric one

• The mechanism for an instability usually involves two competing forces (one force stabilizing the symmetric state, and the other one destabilizing it), with one suddenly winning the contest

• These competing forces in thin objects are often the forces of compression (destabilizing force - favors buckling or wrinkling) and of bending (stabilizing force).

Understanding by data collapse, the power of using …