Education Commons^™

Simulating Function Generators And Oscilloscopes In A Virtual Laboratory Environment, Yiyang Li, Yuzhong Shen, Charles I. Sukenik

Modeling, Simulation and Visualization Student Capstone Conference

This paper discusses the development of a virtual laboratory for simulating electronic instruments commonly used in science and engineering courses, such as function generators and digital storage oscilloscopes. Mathematical equations are used to represent continuous signals and ensure signal integrity, while C# delegates are adopted to enable communication between simulated devices. The approach allows for loose coupling between software components and high cohesion of individual components, and can be applied to other virtual laboratory developments. The virtual laboratory provides a means for students to gain hands-on experience with electronic instruments and improve their understanding of theoretical concepts.

Promoting Skills In Children And Teens With Autism Spectrum Disorder Through Play And Steam, Meaghan Mcleod Mozingo, Krzysztof J. Rechowicz

Modeling, Simulation and Visualization Student Capstone Conference

Individuals with autism spectrum disorder (ASD) have a low employment rate. This is caused by a lack of support from employment resources and the negative stigma associated with common characteristics associated with ASD. With limited career-building activities and events, it is difficult for individuals with ASD to identify their skills, strengths, and career opportunities. Parental support is crucial when seeking employment opportunities for their children. Through the use of play, children with ASD engaged and explored their skills with science, technology, engineering, arts, and math-centered activities. This paper highlights the events and shows the proposed redesign for an additional workshop.

Teaching Analytics Online: A Self-Study Of Professional Practice, Andrew J. Collins, Brandon Butler, James F. Leathrum Jr., Christopher J. Lynch

Engineering Management & Systems Engineering Faculty Publications

As the COVID-19 pandemic caused severe disruption to education enterprises throughout the world, the main response by educational institutions was to move to online learning environments. The purpose of this study was to understand better how instructors could improve online learning for a professional-level week-long short course in a highly technical area (data analytics), which had, pre-COVID, been a hands-on computer, laboratory-based learning experience. The authors used self-study of professional practice to elicit and understand the major issues and concerns of the transition to an online learning environment. Under the guidance of a colleague in teacher education, three course instructors …

How Does Working On An Interdisciplinary Service-Learning Project Vs. A Disciplinary Design Project Affect Peer Evaluators' Teamwork Skills, Isaac Koduah Kumi, Stacie I. Ringleb, Orlando M. Ayala, Pilar Pazos, Francisco Cima, Krishnanand Kaipa, Min Jung Lee, Kristie Gutierrez, Jennifer Jill Kidd

Mechanical & Aerospace Engineering Faculty Publications

Over the course of several semesters, two different project-based learning approaches were used in two undergraduate engineering courses–a 100-level introductory course that covered a general education requirement on information literacy and a 300-level fluid mechanics course. One project (treatment) was an interdisciplinary service-learning project, implemented with undergraduate engineering and education students who collaborated to develop and deliver engineering lessons to fourth and fifth-grade students in a field trip model. The other projects (comparison) involved a team-based design project contained within each class. In the 100-level course, students selected their project based on personal interests and followed the engineering design process …

The Impact Of A Multidisciplinary Service-Learning Project On Engineering Knowledge And Professional Skills In Engineering In Engineering And Education Students, Stacie I. Ringleb, Pilar Pazos, Francisco Cima, Isaac Koduah Kumi, Orlando M. Ayala, Krishnanand Kaipa, Jennifer Jill Kidd, Kristie Gutierrez, Min Jung Lee

Mechanical & Aerospace Engineering Faculty Publications

A multidisciplinary service-learning project that involved teaching engineering to fourth and fifth graders was implemented in three sets of engineering and education classes to determine if there was an impact on engineering knowledge and teamwork skills in both the engineering and education students as well as persistence in the engineering students. Collaboration 1 paired a 100-level engineering Information Literacy class in Mechanical and Aerospace Engineering with a 300-level Educational Foundation class. Collaboration 2 combined a 300-level Electromechanical Systems class in Mechanical Engineering with a 400-level Educational Technology class. Collaboration 3 paired a 300-level Fluid Mechanics class in Mechanical Engineering Technology …

Integration Of Omnet++ Into A Networking Course In An Electrical Engineering Technology Program, Murat Kuzlu, Brian Emmanuel Tamayo, Salih Sarp, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Networking courses are an integral part of electrical engineering technology programs as the majority of electronics in the modern day are required to communicate with each other. They are also getting more attention in manufacturing engineering technology programs because of the development of emerging technologies in Industry 4.0 arena. From laptops, computers, cellphones, modern day vehicles and smart refrigerators, these devices require a certain level of networking in order to communicate with other devices, whether it be locally, or even across the other side of the world. The objective of networking courses in an electrical engineering program is to demonstrate …

Enhancing Online Hands-On Learning In Engineering Education: Student Perceptions And Recommendations, Dalya Ismael

Engineering Technology Faculty Publications

Designing effective online engineering courses that include hands-on components or labs requires a thorough understanding of student perspectives and the development of strategies to improve learning outcomes. Despite the growing number of studies on online learning, little information exists on the unique challenges engineering students face in hands-on courses. To address this gap, this study used a questionnaire to gather engineering students’ perspectives on course design and delivery. The findings highlight the challenges faced by students in online engineering courses with hands-on components, such as difficulty in collaborating with peers. To address these challenges, recommendations are proposed, such as incorporating …

Development Of A Data Science Curriculum For An Engineering Technology Program, Salih Sarp, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic, Zafer Acar

Engineering Technology Faculty Publications

Data science has gained the attention of various industries, educators, parents, and students thinking about their future careers. Statistics departments have traditionally offered data science courses for a long time. The main objective of these courses is to examine the fundamental concepts and theories. However, teaching data science courses has also expanded to other disciplines due to the vast amount of data being collected by numerous modern applications. Also, someone needs to learn how to collect and process data, especially from industrial devices, because of the recent development of Internet of Things (IoT) technologies. Hence, integrating data science into the …

Preparing Undergraduates For The Post-Pandemic Workplace: Teams Of Education And Engineering Students Teach Engineering Virtually, Kristie S. Gutierrez, Jennifer Kidd, Min J. Lee, Krishnanand Kaipa, Orlando Ayala

Teaching & Learning Faculty Publications

When schools and universities across the world transitioned online due to the COVID-19 pandemic, Ed+gineering, a National Science Foundation (NSF) project that partners engineering and education undergraduates to design and deliver engineering lessons to elementary students, also had to shift its hands-on lessons to a virtual format. Through the lens of social cognitive theory (SCT), this study investigates engineering and education students’ experiences during the shift to online instruction to understand how they perceived its influence on their learning. As a result of modifying their lessons for online delivery, students reported learning professional skills, including skills for teaching online and …

Enhancing Student Veterans' Self-Efficacy And Sense Of Belonging In A Targeted Learning Community: Four Years Of Qualitative Results, Anthony W. Dean, Cynthia Tomovic, Vukica Jovanovic, Kim E. Bullington

Engineering Technology Faculty Publications

Eight semesters of qualitative data, collected over four academic years, are presented from a project that resulted in the development of a student professional learning community of high-achieving, low-income engineering and engineering technology student veterans. In the context of this project, student veterans received academic, professional, and financial support that helped them to be successful in school and to prepare them for a career in the STEM workforce. As adult learners, students in this learning community were a vital part of the curriculum development which resulted in increasing the students’ interest and buy-in. Typically, adult learners have lower levels of …

Undergraduate Engineering And Education Students Reflect On Their Interdisciplinary Teamwork Experiences Following Transition To Virtual Instruction Caused By Covid-19, Kristie S. Gutierrez, Jennifer J. Kidd, Min Jung Lee, Pilar Pazos, Krishnanand Kaipa, Stacie I. Ringleb, Orlando Ayala

Teaching & Learning Faculty Publications

This study explores undergraduate engineering and education students’ perspectives on their interdisciplinary teams throughout the rapid transition to online learning and instruction from a face-to-face to a virtual format. In this qualitative study, students’ reflections and focus groups from three interdisciplinary collaborations were analyzed using the lens of Social Cognitive Theory. COVID-19 created a dramatic change in the environment such that the most immediate and direct impact on students’ experiences was on the environmental aspects of Bandura’s triadic reciprocal determinism model, which then triggered behavioral and personal responses to adapt to the new environment. Subsequent evidence of reciprocal effects between …

Integrating Plcs With Robot Motion Control In Engineering Capstone Courses, Sanjeevi Chitikeshi, Shirshak K. Dhali, Vukica Jovanovic

Engineering Technology Faculty Publications

Robotic motion control methods and Programmable Logic Controllers (PLCs) are critical in engineering automation and process control applications. In most manufacturing and automation processes, robots are used for moving parts and are controlled by industrial PLCs. Proper integration of external I/O devices, sensors and actuating motors with PLC input and output cards is very important to run the process smoothly without any faults and/or safety concerns. Most traditional electrical and computer engineering (ECE) programs offer high level of motion theory and controls but little hands-on exposure to PLCs which are the main industrial controllers. This paper provides a framework for …

Rapid Development Of Advanced Virtual Labs For In-Person And Online Education, Yiyang Li, Pauline Delacruz, Yuzhong Shen

Modeling, Simulation and Visualization Student Capstone Conference

This abstract discusses methodologies and preliminary findings on rapid development of advanced virtual labs using modeling and simulation for in-person and online education, including rapid generation of virtual environment, integration of state-of-the-art industry leading software tools, advanced software design techniques that enables large scale software reuse, and innovative user interface design that facilitate the configuration and use of virtual labs by instructors and students. The latest design and development of the virtual lab for electronic circuits is presented.

Experiences During The Implementation Of Two Different Project-Based Learning Assignments In A Fluid Mechanics Course., Orlando Ayala, Kristie Gutierrez, Francisco Cima, Julia Noginova, Min Jung Lee, Stacie Ringleb, Pilar Pazos, Krishnanand Kaipa, Jennifer Kidd

Engineering Technology Faculty Publications

There is growing evidence of the effectiveness of project-based learning (PBL) in preparing students to solve complex problems. In PBL implementations in engineering, students are treated as professional engineers facing projects centered around real-world problems, including the complexity and uncertainty that influence such problems. Not only does this help students to analyze and solve an authentic real-world task, promoting critical thinking, but also students learn from each other, learning valuable communication and teamwork skills. Faculty play an important part by assuming non-conventional roles (e.g., client, senior professional engineer, consultant) to help students throughout this instructional and learning approach. Typically in …

Blast-Building Leaders For Advancing Science And Technology: A Partnership Between The Virginia Space Grant Consortium And The University Of Virginia, Virginia Polytechnic Institute, And Old Dominion University, Cynthia Tomovic, Mary Sandy, Julie Back, Vukica Jovanovic, Kim Lester, Edward Murphy, Sueanne Mckinney, Mileta Tomovic

STEMPS Faculty Publications

This paper presents the development and delivery of educational summer intensive programs for high school students that are designed to encourage students’ interests in the STEM-related fields and the motivation to pursue a STEM-related degrees in college. BLAST (Building Leaders to Advance Science and Technology) is designed as a summer-intensive, residential, on-campus STEM-learning experience for rising ninth and tenth graders. With the intention of improving the STEM-related workforce pipeline in the Commonwealth of Virginia, Virginia Space Grant Consortium (VSGC) offers multiple BLAST programs across the Commonwealth. BLAST programs are designed as intensive three-day, STEM-related three-hour lecture-lab experiences that are reinforced …

Digital Educational Modules Development For The Career And Technical Cybersecurity Pathways During The Covid-19 Pandemic, Vukica Jovanović, Murat Kuzlu, Otilia Popescu, Petros Katsioloudis, Linda Vahala, Michael Wu, Deborah Marshall, Michael Crespo, Mary Addison

Engineering Technology Faculty Publications

Virtual learning has been used now for several decades, but it has never had a bigger impact on student learning than in the era of the COVID-19 pandemic. Universities and schools faced shutdowns all around the world, and teachers had to adapt rapidly to online mode of instruction. Many educators were faced with a triage approach with no previous experience in distance learning, a lack of resources for professional development, and already existing shortages of current educational modules that could assist them in their day-to-day jobs. This gap was especially evident in areas such as career and technical education (CTE) …

Reconfigurable Modules For Automatic Creating Robotic Courses, Ana Djuric, Vukica Jovanovic

Engineering Technology Faculty Publications

The main objective of this paper is to describe a teaching tool that can be used for automated creation of different problems that can be used for assessing student knowledge while teaching industrial robotics courses. These materials can be used for instructors who need to create customized questions and answers for different student homework. Wayne State University, Detroit, MI offer different industrial robotics and courses related to fundamental robotic theory: kinematics, dynamics, and control. Old Dominion University, Norfolk, VA offers the course in Introduction to Industrial Robotics. Both programs are Mechanical Engineering Technology under the Engineering Technology departments / division. …

Validation Of The Ambassador Questionnaire For Undergraduate Students Conducting Engineering Outreach, Melissa G. Kuhn, Shanan Chappell Moots, Joanna K. Garner

Center for Educational Partnerships Publications

Although K-12 engineering outreach commonly involves college students, the young professionals who act as ambassadors for their field are less likely to be studied than the students they serve. Yet, outreach activities may offer opportunities for undergraduate students to develop aspects of their professional selves. As there is currently no comprehensive measure that allows researchers, program evaluators, and outreach advisors to examine ambassadors' professional development and growth, this study sought to develop and validate an Ambassador Questionnaire (AQ). The multi-step process included the selection and adaptation of items from extant measures of engineering students' motivation, beliefs, professional skills, and perceptions …

Overview Of Standards For Technological And Engineering Literacy (Other), Philip Reed, Tyler Love, Scott Bartholomew, Kelly Dooley

STEMPS Faculty Publications

In 2020, the International Technology and Engineering Educators Association (ITEEA) published Standards for Technological and Engineering Literacy: The Role of Technology and Engineering in STEM Education (STEL) [1]. These standards open with a clear rationale why all Pk-12 students should study technology and engineering:

Technology and engineering are pervasive in all aspects of our lives. Every human activity is dependent upon the products, systems, and processes created to help grow food, provide shelter, communicate, work, and recreate. As the world grows more complex, it is increasingly important for everyone to understand more about technology and engineering [1, p. 1].

The …

The Influence Of Participation In A Multi-Disciplinary Collaborative Service Learning Project On The Effectiveness Of Team Members In A 100-Level Mechanical Engineering Class, Stacie I. Ringleb, Pilar Pazos, Julia Noginova, Francisco Cima, Orlando Ayala, Krishnanand Kaipa, Jennifer Kidd, Kristie Gutierrez

Mechanical & Aerospace Engineering Faculty Publications

Engineers need to develop professional skills, including the ability to work successfully in teams and to communicate within and outside of their discipline, in addition to required technical skills. A collaborative multi-disciplinary service learning project referred to as Ed+gineering was implemented in a 100-level mechanical engineering course. In this collaboration, mechanical engineering students, primarily in the second semester of their freshman year or first semester of their second year, worked over the course of a semester with education students taking a foundations course to develop and deliver engineering lessons to fourth or fifth graders. Students in comparison engineering classes worked …

Senior Elective Communications Systems Courses As Pathways To Capstone Projects In Electrical Engineering Technology Program, Otilia Popescu, Murat Kuzlu

Engineering Technology Faculty Publications

In any engineering program the capstone project is the most comprehensive work completed by the students, and is regarded as the pinnacle of their engineering studies, with all their course work culminating with this major design, implementation and reporting product. Coming up with the actual topic of the project is sometimes the most difficult part of the project, especially in programs where the project topics are not solely proposed by the faculty, and they are for the student and advisor to develop together. This is especially the case of engineering technology programs, where a large percentage of students have work …

A Look Into Increasing The Number Of Veterans And Former Government Employees Converting To Career And Technical Cybersecurity Teachers, Vukica M. Jovanovic, Michael Anthony Crespo, Drew E. Brown, Deborah Marshall, Otilia Popescu, Murat Kuzlu, Petros J. Katsioloudis, Linda Vahala

Engineering Technology Faculty Publications

The current state of technology with recent explosions in the digital processing of paperwork, computer networking use, and online and virtual approaches to areas, which until very recently had traditional and non-computerized ways of operating, led to a steady increase in the demand for jobs in the area of computer science and cybersecurity. The education system, the pipeline for the incoming workforce, needs to keep up with this tremendous pace in technology and the job market. The current K-12 school system has been extensively challenged to fill out necessary positions in order to address the increasing need for programs that …

Expanding A Mechanical Engineering Technology Curriculum To Include Additive Manufacturing, Hamid Eisazadeh, Mona Torabizadeh

Engineering Technology Faculty Publications

Additive Manufacturing (AM) has become a game changer for the manufacturing industry. With growing implementation of AM in various industries, it is the responsibility of different levels of education to expose students to AM technologies and to integrate AM into their curriculum. It is well known that students who gain the skillsets of today’s industry have a better chance in getting a competitive job. In response to this need, a new senior level elective course on AM, has been developed for the first time in Old Dominion University (ODU) region in the South. The course was developed and taught by …

Development Of A Smart Grid Course In An Electrical Engineering Technology Program, Murat Kuzlu, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Electric power systems courses have been traditionally offered by electrical engineering technology programs for a long time, with the main objective to introduce students to the fundamental concepts in the field of electric power systems and electrical to mechanical energy conversion. A typical electric power systems course covers a variety of topics, such as general aspects of electric power system design, electric generators, components of transmission and distribution systems, power flow analysis, system operation, and performance measures. In the last decades, electric power systems have significantly modernized alongside with requirement of improvement in system efficiency, reliability, cybersecurity, and environmental sustainability. …

Enhancing Preservice Teachers' Intention To Integrate Engineering Through A Multi-Disciplinary Partnership (Evaluation), Francisco Cima, Pilar Pazos, Jennifer Jill Kidd, Kristie S. Gutierrez, Stacie I. Ringleb, Orlando M. Ayala, Krishnanand Kaipa

Engineering Management & Systems Engineering Faculty Publications

Driven by the need to broaden participation and increase recruitment in STEM fields, considerable efforts are underway to promote the infusion of engineering into elementary and secondary grade levels. The benefits of engineering education and the strong support from professional and educational groups are well documented, yet the actual integration of engineering content in the K-12 setting remains a challenge. Pre-college educator programs that train future teachers are a natural target for the integration efforts. Although elementary educators recognize the importance of integrating engineering in their classrooms, they often lack the confidence to teach engineering content. The absence of effective …

Pedagogical Methods And Advances For Synchronous/Asynchronous Instruction Of Laboratories In Engineering Technology Programs, Nestor Escobales, Alok Verma

Engineering Technology Faculty Publications

Significant research has been done on the subject of distance learning (DL) instruction for many academic disciplines. However, when it comes to engineering technology (ET) programs, particularly, engineering laboratory work, limited studies are available. It is unquestionable that engineering laboratory work is essential for the successful preparation of individuals enrolled in ET programs. The focus of ET programs is on the correct use and application of engineering principles with a direct focus on practical application rather than on theory alone. The difficulties increase significantly when laboratories are offered in DL mode, particularly for ET programs. It is well known that …

Mentoring Prospective Engineering Students Through The After School Program "Girls In Engineering" Focused On Building An Underwater Remotely Operated Vehicle, Vukica M. Jovanović, Deborah Marshall, Jeff Warren Larson Jr., Abdul Rahman Badawi, Neil R. Stclair, Otilia Popescu, Murat Kuzlu, Petros J. Katsioloudis, Linda Vahala, Michael Anthony Crespo

Engineering Technology Faculty Publications

A number of studies by engineering education researchers have pointed out that all-female teams, rather than mixed teams, result in better forms of participation and interaction in engineering related after-school programs and clubs. In particular, for after-school programs or clubs that form in response to a STEM competition, all-female teams have better chances of developing. One such competition, which will be discussed in this paper, is a regional Marine Advanced Technology Education (MATE) competition in which students from Blind_Review High School have been participating for many years.For each year’s competition, an all-female team of students enrolled in the Career and …

Facilitating Veteran And Adult Students' Learning And Retention In Engineering: Faculty-Student Partnership - A Model Of An Evidence-Based Practice, Kim E. Bullington, Anthony Dean, Cynthia Tomovic, Vukica M. Jovanović, Rafael E. Landaeta

Engineering Technology Faculty Publications

With the growing number of adult and military veterans entering higher education, it is important to understand and incorporate the basics of andragogy in curriculum, course development, and the learning environment to facilitate learning and degree completion. Researchers in this S-STEM project funded by the NSF share observations of a student-faculty partnership that resulted from the development of a formal learning community. A series of targeted seminars were conducted that appear to have increased adult and military veteran engineering and technology students’ levels of connectedness and self-efficacy. Results of this pilot study are shared as an evidence-based practice to enhance …

Engineering Technology Programs Outreach To K-12, Alok Verma

Engineering Technology Faculty Publications

The Engineering Technology (ET) degree emphasizes hands-on application and implementation. Graduates holding this degree play a valuable role in economically growing the US and keeping it internationally competitive. However, “engineering and engineering technology, are widely misunderstood… the public sector (employers, students, high-school counselors, politicians and the general public) needs to be educated as to the particular value of each,” according to Engineering.com [1]. The National Academy of Engineering states, “Unlike the much better-known field of engineering, engineering technology is unfamiliar to most Americans and goes unmentioned in most policy discussions about the US technical workforce. This is even though workers …

Standards For Technological And Engineering Literacy: Addressing Trends And Issues Facing Technology And Engineering Education, Johnny J. Moye, Philip A. Reed

STEMPS Faculty Publications

The article offers information on addressing trends and issues facing technology and engineering education. It mentions future challenges, students need to "have a broad conceptual understanding of technology and its place in society, enabling them to be active participants in the technological world and careful creators and users of technology.