Architectural Engineering Commons^™

Poster Session: Onu Engineering Freshman And Senior Design Projects, Keith Schimmel

Scholar Week 2016 - present

This poster session is held Friday, April 19, 4:45-6:15pm, with food served, in the Reed Hall of Science Tech Center.

The capstone engineering senior design projects at Olivet Nazarene University involve interdisciplinary engineering teams completing real-life projects sponsored by companies, mission organizations, and professional society competitions. The engineering first-year design projects at Olivet Nazarene University involve interdisciplinary engineering teams proposing product improvement designs, using Computer Aided Design (CAD) software. Posters for both the senior and freshman engineering design projects will be presented during this poster session.

In Situ Monitoring Of The Hydration Of Calcium Silicate Minerals In Cement With A Remote Fiber-Optic Raman Probe, Bohong Zhang, Wenyu Liao, Hongyan Ma, Jie Huang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study utilized a novel in situ fiber-optic Raman probe to continuously monitor the hydration progress of tricalcium silicate (C₃S) and dicalcium silicate (C₂S) without the need for sampling, from early hydration stage to later stages, and from fresh to hardened states of paste samples. By virtue of the remarkable ability of this technique in characterizing either dry or wet and crystalline or amorphous samples, the hydration processes of C₃S and C₂S pastes with different water-to-solid (w/s) ratios could be monitored from the start of the hydration reaction. The main hydration products, …

Sky Survey Radio Telescope, Jack E. Mcguigan

Electrical Engineering

This document outlines the design of a radio telescope designed to perform hydrogen line sky surveys. The telescope produces radio images mapping the intensity and relative velocities of hydrogen concentrations to their sky coordinates. Over the course of a day, the telescope images the regions of space visible to it, allowing sky survey imagery to be updated daily. Sky survey images are comprised of an array of pixels corresponding to specific sky coordinates. Each 8-bit RGB pixel contains information on the concentrations of hydrogen in the brightness and relative velocity in the color. Radio images mapping the concentrations and velocities …

Remote Alignment Fixing Device With Vizir Marks In Base Lcd Indicator, Nodirbek Rustambekovich Yusupbekov, Zahidov Muratovich Nematjon

Chemical Technology, Control and Management

The article substantiates the needs to increase the level of automation of methods and geodetic support of geometric parameters during the construction of buildings and structures. In particular, the method of alignment measurements is considered. This is widely used in determining deviations from the straightness and alignment of the installation of elements in engineering building structures, including hydraulic structures, as well as in the control of process equipment installations, rolling mills, conveyor lines, crane tracks, when monitoring precipitation. and deformations of techno objects. One of the methods of alignment measurements with the use of a visual-optical device – aliniometer and …

Module 01: Introduction To Architectural Cad, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 06: Hvac, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 05: Plumbing Plans, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 03a: Floor Plan Intro, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 07: Wall Sections, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 03b: Detail Floor Plan Layout, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 04: Electrical Plans, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 08: Roof Plans, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 09: Site Plan, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 02: Residential Design, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

Module 03c: Dimensioning, Keith Johnson, Mohammad Moin Uddin

ENTC 2160: Architectural CAD

No abstract provided.

The Impact Of Pev User Charging Behavior In Building Public Charging Infrastructure, Ahmad Almaghrebi

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

Plug-in electric vehicles (PEVs) play a significant role in the development of green cities since they generate less pollution than conventional vehicles. To promote PEV adoption and mitigate range anxiety, charging infrastructure should be deployed at strategic locations that are readily accessible to the public. Nebraska is working on the expansion of charging infrastructure around the state; however, stakeholders face several difficulties in trying to minimize irregular charging behaviors. Most electric vehicle users plug in and leave their vehicles for an extended time at public parking lots designated for PEVs. Some users even leave their vehicles for longer than 24 …

Thermoelectric Materials In Exterior Walls: Experimental Study On Using Smart Facades For Heating And Cooling In High-Performance Buildings, Ajla Aksamija, Zlatan Aksamija, Christopher H. Counihan, Dylan Brown, Meenakshi Upadhyaya

Ajla Aksamija

Thermoelectric Materials In Exterior Walls: Experimental Study On Using Smart Facades For Heating And Cooling In High-Performance Buildings, Ajla Aksamija, Zlatan Aksamija, Christopher H. Counihan, Dylan Brown, Meenakshi Upadhyaya

Zlatan Aksamija

Harmonics Elimination In Three Phase Cascade H-Bridge Multilevel Inverter Using Virtual Stage Pwm, Amro Quedan

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

The multilevel inverters are one of the great solutions that are proposed to satisfy the demand for high-power application and the significant integration of renewable energy. The conversion process from DC to AC must be done at high efficiency to decrease the energy loss and to ensure the electric grid power quality. The Total Harmonic Distortion (THD) is the most important feature that indicates the efficiency of the conversion process. In this research, due to the advantages of the cascade H-bridge inverter over other topologies, it has been used with the virtual stage PWM technique to investigate two different methods …

Adaptive Environments For Enabling Senior Citizens: An Holistic Assessment Tool For Housing Design And Iot-Based Technologies, Matteo Zallio, Damon Berry, Niccolò Casiddu

Conference papers

The population of older adults will continuously increase over the coming decades. As they get older, people will require assistance and regular monitoring, with higher costs for welfare system and families. Two vital aspects of a healthy lifestyle, are domestic autonomy and maintenance of relationships within the neighborhood. This leads to an interesting research issue: “Could houses and appliances have the potential to improve autonomy and quality of life of citizens? Which methods and tools could enhance wellbeing and healthy conditions? The house has the potential to be a safe, adaptive environment, integrated with technologies for life support. This work …

Estimation On Gibbs Entropy For An Ensemble, Lekhya Sai Sake

Electronic Theses, Projects, and Dissertations

In this world of growing technology, any small improvement in the present scenario would create a revolution. One of the popular revolutions in the computer science field is parallel computing. A single parallel execution is not sufficient to see its non-deterministic features, as same execution with the same data at different time would end up with a different path. In order to see how non deterministic a parallel execution can extend up to, creates the need of the ensemble of executions. This project implements a program to estimate the Gibbs Entropy for an ensemble of parallel executions. The goal is …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Ludmilla D Pavlova

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Cal Poly Brocade Challenge 2013, Chandler Morehardt, Alexa Coburn, Juan Silva, Kerry Sun, Greg Wang, Raul Chagoya, Jd Torres

Architectural Engineering

No abstract provided.

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Elec 2110: Elements Of Electrical Engineering—A Peer Review Of Teaching Project Benchmark Portfolio, Mahmoud Alahmad

UNL Faculty Course Portfolios

I have been teaching this class for the last five years. As an introductory course to electrical engineering, there is a lot of material that needs to be covered. All the material is important and relevant, and I try to go in-depth in each topic area. This approach has resulted in overwhelming the students and made them struggle with the course content, application and utilization. As I consider this course for the peer review, I am evaluating the depth of each topic and the opportunity to adjust the approach and method used to introduce new concepts and at the same …

Technology Portal For Energy Efficient Buildings, Larry D. Hermanson, Daniel Studer, Annie Mroz

STAR Program Research Presentations

Project: Technology Portal for Energy Efficient Buildings

Date: August 2, 2012

Author: Larry Hermanson

Mentor: Daniel Studer

Cohort: Annie Mroz

Lab site: National Renewable Energy Laboratory (NREL)

Buildings account for 71% of the electricity demand and 39% of the primary energy consumption in the United States. The Commercial Buildings Group at NREL provides builders, designers and building owners accurate information to significantly improve the energy efficiency of new and existing buildings. The Technology Portal for Energy Efficient Buildings will increase the accessibility of standardized and credible energy performance data for all building systems, thereby allowing building owners to better evaluate …

Assessing The Engineering Performance Of Affordable Net-Zero Energy Housing, Jordan P. Wallpe

Purdue Polytechnic Masters Theses

The purpose of this research was to evaluate affordable technologies that are capable of providing attractive, cost-effective energy savings to the housing industry. The research did so by investigating the 2011 Solar Decathlon competition, with additional insight from the Purdue INhome. Insight from the Purdue INhome verified the importance of using a three step design process to design a net-zero energy building. In addition, energy consumption values of the INhome were used to compare and contrast different systems used in other houses.

Evaluation of unbiased competition contests gave a better understanding of how a house can realistically reach net-zero. Upon …

An Adaptive Utility Interactive Photovoltaic System Based On A Flexible Switch Matrix To Optimize Performance In Real-Time, Mahmoud Alahmad, Mohamed Amer Chaaban, Siu Kit Lau, Jonathan Shi, Jill Neal

Durham School of Architectural Engineering and Construction: Faculty Publications

Reconfigurable architectures are of great interest to system designers to improve the system’s operation and efficiency. In this paper, we propose an adaptive utility interactive photovoltaic (PV) system based on a novel Flexible Switch array Matrix topology. This proposed system maximizes the generated power in real-time in response to operational conditions such as shading, soiling, mismatches, and module failure among others. The proposed system is a compromise in the utilization of power conditioning equipment to maximize energy capture and system efficiency. Simulation results demonstrate an average 13% improvement in efficiency when compared with the central inverter topology performance. A prototype …

Ann Based Load Identification And Forecasting System For The Built Environment, Hosen Hasna

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

"Phantom Loads" cause energy waste in homes and the built environment as a whole. Consumers spend more than $3 billion a year on "Phantom Load" in the United States alone. The goal of this work is to conserve energy by increasing consumer awareness on their energy usage and appropriate tools which in turn will be reducing and /or eliminating phantom loads and mismanagement of the load in the built environment. A further goal is to improve upon existing power distribution systems in the built environment with limited hardware additions to increase energy conservation. This work investigates remote identification of load …