Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- BIM (11)
- Building Information Modelling (9)
- Education (7)
- Ireland (5)
- Sustainability (5)
-
- Collaboration (3)
- BICP (2)
- Blockchain (2)
- Building Information Modelling (BIM) (2)
- Built environment (2)
- Digital (2)
- Geomatics (2)
- Horizon 2020 (2)
- Lean Construction (2)
- Mandate (2)
- Phase Change Materials; PCM-concrete; Thermal storage behaviour (2)
- Public Sector (2)
- Public Works (2)
- Public Works Projects (2)
- Thermal diffusivity (2)
- Thermal storage (2)
- ARISE (1)
- Academic institutions (1)
- Academic publications (1)
- Acceleration (1)
- Adoption. (1)
- Assessment (1)
- BIM Innovation Capability Programme (1)
- BIM Careers (1)
- BIM Education (1)
Articles 1 - 30 of 37
Full-Text Articles in Architecture
The Suitability Of Demand-Controlled Sensor Based Ventilation Systems In Retrofit Dwellings - A Longitudinal Study., Seamus Harrington, Mark Mulville
The Suitability Of Demand-Controlled Sensor Based Ventilation Systems In Retrofit Dwellings - A Longitudinal Study., Seamus Harrington, Mark Mulville
Conference papers
A fabric-first approach to dwelling retrofit results in increased airtightness, therefore there is an obligation to ensure that the upgrades do not lead to poor indoor air quality (IAQ) resulting from inadequate ventilation. The sensor-based demand-controlled ventilation (SBDCV) under review seeks to provide fresh air for breathing and to dilute and exhaust pollutants and odours. This system modulates the ventilation rate over time based on relative humidity levels and/or presence detection and considers that the level of ventilation provided is sufficient to control the concentration of all other indoor air pollutants, including those that are not a result of human …
Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo
Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo
Conference papers
The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …
A Proposal To Harmonize Bim And Iot Data Silos Using Blockchain Application, Zulkefly Abu Bakar, Malachy Mathews Dr
A Proposal To Harmonize Bim And Iot Data Silos Using Blockchain Application, Zulkefly Abu Bakar, Malachy Mathews Dr
Conference papers
The integration of Building Information Modelling (BIM) and Internet of Things (IoT) provide significant end-to-end benefits for the architecture, engineering, construction, and operations (AECO) industry. Example applications include on-site assembly services, data localization for built environment, occupancy performance measures and many other analyses that can be used to improve the built environment. However, silos in the BIM and IoT data exchange have impacted the digital process adoption in AECO industry, which aims to change the dynamics and behaviors of the current working process. Penzes, (2018) in his report, acknowledges the AECO industry as one of the most fragmented sectors with …
Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore
Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore
Conference papers
As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …
The Irish Construction Industry’S State Of Readiness For A Bim Mandate In 2020, Barry Mcauley, Alan V. Hore, Roger P. West
The Irish Construction Industry’S State Of Readiness For A Bim Mandate In 2020, Barry Mcauley, Alan V. Hore, Roger P. West
Conference papers
It was recently announced that a BIM mandate for the Irish public sector is not imminent, suggesting that the sector is not yet ready for what such a mandate implies. Following on from a forward-looking BIM Roadmap for Ireland in 2017 and the publication by the authors of a detailed BIM in Ireland study in 2017 and 2019, what is the actual state of readiness for a more general BIM mandate in Ireland? This paper will review recent publications, seminars and industry initiatives on this topic of interest supported by an online survey to assess the current state of readiness …
Bim Research In Irish Academic Institutions 2015-19, Barry Mcauley, Alan V. Hore, Roger P. West
Bim Research In Irish Academic Institutions 2015-19, Barry Mcauley, Alan V. Hore, Roger P. West
Conference papers
The use of BIM in the Irish construction industry has become pervasive in the last decade and it is an essential element in improving productivity in the market. The developments in BIM education and training in supporting the increase in Ireland’s BIM maturity has been well documented in recent years, principally through the proceedings of the BIM Gatherings and the BIM in Ireland 2017 and 2019 reviews. Similarly, the public and private sectors have been surveyed to establish their readiness for digital transformation on their BIM journey. However, BIM research undertaken by Irish academics, while individually strong, has not been …
Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan
Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan
Conference papers
The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …
Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West
Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West
Conference papers
Like most sectors in today’s working world, construction businesses are challenged to work in an increasingly digitised world with sophisticated demands from intelligent clients. So much has been written about the inefficiencies of the construction industry, its fragmentation, lack of collaboration, low margins, adversarial pricing, poor productivity, financial fragility, lack of research and development, poor industry image and relatively weak use of digital solutions. The Irish government recognises the importance of digital innovation to address many of the challenges the construction industry faces. With recent high profile reports of escalating spend on signature public sector projects and weak productivity performance …
Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West
Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West
Conference papers
In 2017, the BIM Innovation Capability Programme team applied five macro BIM maturity conceptual models to capture the capability of the Irish construction industry and assess its BIM maturity. The results found that while Ireland is mature for modelling processes, it is less developed with regards to collaboration processes and policies. Ireland also ranked poorly when it came to regulatory frameworks, measurements and benchmarks compared to a number of countries which also applied the same conceptual models. At the time, the findings highlighted that Ireland’s diffusion dynamic was middle out, meaning that larger organisations or industry associations were pushing the …
An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre
An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre
Conference papers
Previous research has established that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. While Lean Construction, Building Information Modelling (BIM), and Integrated Project Delivery (IPD) can all be viewed as separate processes which add independent value to a project, they are more effective when used in partnership with each other. In order to ensure the high levels of collaboration expected for these processes to work in unison, the early involvement of the Contractor is paramount. Early contractor involvement within the design process can ensure a more focused integrated project team, improvement of both constructability and cost certainty, as …
From Roadmap To Implementation: Lessons For Ireland’S Digital Construction Programme, Barry Mcauley, Alan Hore, Roger West
From Roadmap To Implementation: Lessons For Ireland’S Digital Construction Programme, Barry Mcauley, Alan Hore, Roger West
Conference papers
As part of their Future of Construction initiative in 2018 the World Economic Forum published an action plan to accelerate Building Information Modelling adoption. The WEF report highlighted actions that companies, industry organisations and governments are advised to implement to accelerate BIM adoption and better capitalise on delivering better project outcomes. According the authors of the report BIM is seen as the centrepiece of the construction industry’s digital transformation, however they acknowledged that BIM adoption globally remain slow. Anecdotal experience would suggest that BIM usage in Ireland is also very low and that a similar initiative or an adaptation of …
Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West
Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West
Conference papers
Building Information Modelling (BIM) has been formally adopted by many countries with the promise of creating greater economic, social and sustainability benefits. Several authors and institutions have presented alternative BIM policies and tactics which have been adopted by developed countries. However, there is evidence to indicate that BIM adoption theories are not well established and, in particular, the linkage between BIM public sector adoption strategy outcomes and their contribution to achieving Government policy objectives are underdeveloped. This paper will present the outcome of the first phase of a systematic literature review of published studies (including journal papers and noteworthy international …
What Is A Bim Design Model?, James Peters, Malachy Mathews
What Is A Bim Design Model?, James Peters, Malachy Mathews
Conference papers
The recent report into Building Information Management or BIM, by construction law experts May Winfield and Sarah Rock entitled “Winfield Rock Report” [1] gives reason to state that the UK architectural, engineering and construction industry or AEC, is hindered by the absence of a clear definition of Level 2 BIM. The ISO 19650-2 standard published in 2019, is based upon PAS1192-2:2013. The intent of ISO 19650-2 is to provide a road map to facilitate the standardisation of BIM process in a uniformed fashion. A key pillar of ISO 19650 is the “information cycle” and central to this is a federated …
The Adoption Of A Design Build Approach In Retrofit Projects – A Descriptive Case Study, Lloyd Scott
The Adoption Of A Design Build Approach In Retrofit Projects – A Descriptive Case Study, Lloyd Scott
Conference papers
The delivery Design Build projects across the built environment in Ireland has begun to take significant shape. There are many examples of the traditional are moving towards more collaborative practices. There exists support for the integration of a design build project approach in the retrofit realm where designer, client and developer can work collaboratively. As with the regular design build process the intent behind this collaborative approach is to encourage those associated with the built environment to consider how retrofit design and construction can contribute positively to addressing elements of climate change and the design build process. The opportunity to …
Design And Manufacture Of A Precast Pcm Enhanced Concrete Cladding Panel For Full Scale Performance Monitoring, Dervilla Niall, Roger West, Oliver Kinnane
Design And Manufacture Of A Precast Pcm Enhanced Concrete Cladding Panel For Full Scale Performance Monitoring, Dervilla Niall, Roger West, Oliver Kinnane
Conference papers
The overall aim of this study is to develop innovative precast cladding panels for the renovation of Europe’s existing building stock thereby improving their energy performance. Using the mass of a building to store heat and/or cold can reduce the demand on the auxiliary heating and/or cooling systems and hence reduce the overall energy demand of the building. Previous laboratory research has shown that the incorporation of phase change materials (PCMs) into concrete enhances its thermal storage capacity by up to 50%. However in a real application where a PCM-concrete composite material is used in a building to store thermal …
Ireland’S Bim Macro Adoption Study: Establishing Ireland’S Bim Maturity, Barry Mcauley, Alan Hore, Roger West, Mohamad Kassem, Shiyao Kuang
Ireland’S Bim Macro Adoption Study: Establishing Ireland’S Bim Maturity, Barry Mcauley, Alan Hore, Roger West, Mohamad Kassem, Shiyao Kuang
Conference papers
Since 2016 the BIM Innovation Capability Programme (BICP) has captured the capability of the Irish Construction Industry’s and the Higher Education Institutes’ (HEIs) response to the increased requirement for BIM on Irish construction and engineering projects. One of the primary responsibilities of the BICP research team is to collate data to assist the National BIM Council of Ireland in the formulation of a National BIM Roadmap. To assist the Council with this task the BICP research team applied five macro BIM maturity conceptual models to assess Ireland’s BIM maturity. The results from the models were further utilised to develop a …
Stewardship Of International Bim Programmes: Lessons For Ireland, Barry Mcauley, Alan Hore, Roger West, Shiyao Kuang
Stewardship Of International Bim Programmes: Lessons For Ireland, Barry Mcauley, Alan Hore, Roger West, Shiyao Kuang
Conference papers
The support by central government of national Building Information Modelling (BIM) programmes is common throughout the developed world today. To further understand how the different international governments have supported their BIM programmes the BIM Innovation Capability Programme (BICP) research team in Ireland recently completed a comprehensive Global BIM Study to help inform the National BIM Council (NBC) of Ireland in developing a Roadmap to Digital Transition for Ireland’s Construction Sector. This paper details the findings of a more concentrated investigation on a selection of jurisdictions on how particular international BIM programmes are orgainsed, managed and the level of governmental support …
What Lessons Can Be Learned From The Delivery Of The First Building On The Grangegorman Campus Using Building Information Management (Bim)?, Pat O'Sullivan, Avril Behan
What Lessons Can Be Learned From The Delivery Of The First Building On The Grangegorman Campus Using Building Information Management (Bim)?, Pat O'Sullivan, Avril Behan
Conference papers
There is an acceptance that BIM, via data management, can be integrated with FM to reduce costs during the Operations and Maintenance stage of a project. However, what has not been documented is the ‘on the ground’ reality which can be reviewed as a lessons learnt exercise to improve the implementation of BIM FM for future projects. This case study sets out to explore the realities of a client’s adoption of BIM based upon the actual experience of the Greenway Hub. Rather than relying on anecdotal evidence the research was based upon the real practices and experiences of the Dublin …
Establishing The Key Pillars Of Innovation Required To Execute A Successful Bim Strategy Within A Construction Sme In Ireland, Barry Mcauley, Patrick Carroll
Establishing The Key Pillars Of Innovation Required To Execute A Successful Bim Strategy Within A Construction Sme In Ireland, Barry Mcauley, Patrick Carroll
Conference papers
The recent resurgence of the Irish Construction Industry comes at a time of global transition towards an information revolution, with technology now playing a vital role within our post-recessionary society. BIM is now seen as a core technology at the forefront of this transformational change which can present Construction SMEs with opportunities to new financial ventures. If any SME organisation is to be successful with BIM adoption then innovation must be the starting point. The aim of this paper is to establish the enabling factors required for innovating a BIM strategy within a SME Construction Organisation. The methodology involved a …
Bim+Blockchain: A Solution To The Trust Problem In Collaboration?, Malachy Mathews, Dan Robles, Brian Bowe
Bim+Blockchain: A Solution To The Trust Problem In Collaboration?, Malachy Mathews, Dan Robles, Brian Bowe
Conference papers
This paper provides an overview of historic and current organizational limitations emerging in the Architecture, Engineering, Construction, Building Owner / Operations (AECOO) Industry. It then provides an overview of new technologies that attempt to mitigate these limitations. However, these technologies, taken together, appear to be converging and creating entirely new organizational structures in the AEC industries. This may be characterized by the emergence of what is called the Network Effect and it’s related calculus. This paper culminates with an introduction to Blockchain Technology (BT) and it’s integration with the emergence of groundbreaking technologies such as Internet of Things (IoT), Artificial …
Bim Innovation Capability Programme Of Ireland, Barry Mcauley, Alan Hore, Roger West
Bim Innovation Capability Programme Of Ireland, Barry Mcauley, Alan Hore, Roger West
Conference papers
The Irish Government has requested that Enterprise Ireland, an organisation responsible for the development and growth of Irish enterprises in world markets to actively promote the use of BIM in Ireland. This promotion has taken the form of an opportunity for Enterprise Ireland clients to apply for a grant under their BIM Enable and BIM Implementation schemes and also through their funding of the BIM Innovation Capability Programme (BICP) of Ireland. The BICP is a two-year project (2016-2018) which seeks to capture the capability of the Irish Construction Industry and the Higher Education Institutes to respond to the increased requirement …
Linking Geospatial Engineering Into Collaborative Multidisciplinary Bim Projects - An Educational Perspective, Avril Behan, Helen Murray, Jonathan Argue, Ronan Hogan, Audrey Martin, Pat O'Sullivan, Robert Moore, Malachy Mathews
Linking Geospatial Engineering Into Collaborative Multidisciplinary Bim Projects - An Educational Perspective, Avril Behan, Helen Murray, Jonathan Argue, Ronan Hogan, Audrey Martin, Pat O'Sullivan, Robert Moore, Malachy Mathews
Conference papers
This paper describes the background to and execution of a postgraduate project undertaken by students on DIT's MSc in Geospatial Engineering (GeoEng) in support of a project on level 2 BIM being undertaken by students on the MSc in applied Building Information Modelling & Management (aBIMM) around the retrofit of and new build extension to the Grangegorman Clock Tower Building. In support of this requirement, an external and internal survey of the existing structure and its surrounding topography was required. The aBIMM students and staff acted as the Design Team who subcontracted the Geo Eng group who were organised into …
A Review Of Approaches To Solving The Problem Of Bim Search: Towards Intelligence-Assisted Design, Hamed Khademi, Avril Behan
A Review Of Approaches To Solving The Problem Of Bim Search: Towards Intelligence-Assisted Design, Hamed Khademi, Avril Behan
Conference papers
Due to the growing adoption of BIM and the rising popularity of cloud computing, BIM models are increasingly stored in central cloud repositories or Common Data Environments. Effective management and exploitation of these models creates the requirement for BIM retrieval systems. Thus far, the BIM industry has utilized general-purpose, text-based search techniques that operate on BIM metadata. This paper highlights the need for a domain-specific BIM search engine and reviews various approaches to address the problem of BIM search. Three main approaches were identified as context-, geometry-, and content-based BIM retrieval. For a comprehensive BIM retrieval system, all three approaches …
Thermal Mass Performance Of Concrete Panels Incorporated With Phase Change Materials, Dervilla Niall, Roger West, Oliver Kinnane, Sarah Mccormack
Thermal Mass Performance Of Concrete Panels Incorporated With Phase Change Materials, Dervilla Niall, Roger West, Oliver Kinnane, Sarah Mccormack
Conference papers
Using the mass of a building as a thermal storage system can reduce the demand on the auxiliary heating and cooling systems of the building. Concrete combines a high specific heat capacity with a thermal conductivity that is appropriate for the diurnal heating and cooling cycle of buildings. The heat storage capacity of concrete can be enhanced by adding phase change materials (PCMs) which provide a high latent heat storage capacity. However the addition of PCM to concrete reduces the conductivity of the concrete which may affect the ability of a PCM-concrete panel to absorb and release heat within the …
Adaptive Environments For Enabling Senior Citizens: An Holistic Assessment Tool For Housing Design And Iot-Based Technologies, Matteo Zallio, Damon Berry, Niccolò Casiddu
Adaptive Environments For Enabling Senior Citizens: An Holistic Assessment Tool For Housing Design And Iot-Based Technologies, Matteo Zallio, Damon Berry, Niccolò Casiddu
Conference papers
The population of older adults will continuously increase over the coming decades. As they get older, people will require assistance and regular monitoring, with higher costs for welfare system and families. Two vital aspects of a healthy lifestyle, are domestic autonomy and maintenance of relationships within the neighborhood. This leads to an interesting research issue: “Could houses and appliances have the potential to improve autonomy and quality of life of citizens? Which methods and tools could enhance wellbeing and healthy conditions? The house has the potential to be a safe, adaptive environment, integrated with technologies for life support. This work …
Mechanical And Thermal Evaluation Of Different Types Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger West, Sarah Mccormack
Mechanical And Thermal Evaluation Of Different Types Of Pcm-Concrete Composite Panels, Dervilla Niall, Oliver Kinnane, Roger West, Sarah Mccormack
Conference papers
ABSTRACT: Thermal mass indicates the ability of a material to store and release heat and is a function of the heat storage capacity of a material. The thermal mass of construction materials can be used to reduce the energy required for heating and cooling buildings. The heat storage capacity of concrete can be increased by incorporating phase change materials (PCMs) into the concrete and hence providing additional latent heat storage capacity. Research was carried out to compare the thermal behaviour of two different types of PCM/concrete composite panels. The first type of panel was formed by adding microencapsulated paraffin to …
Thermal Mass Behaviour Of Concrete Panels Incorporating Phase Change Materials, Dervilla Niall, Roger West, Sarah Mccormack, Oliver Kinnane
Thermal Mass Behaviour Of Concrete Panels Incorporating Phase Change Materials, Dervilla Niall, Roger West, Sarah Mccormack, Oliver Kinnane
Conference papers
Phase Change Materials (PCM) have been incorporated into a range of building envelope materials with varied success. This study investigates two different methods of combining concrete and phase change materials to form PCM/concrete composite panels. The first method involves adding microencapsulated paraffin to fresh concrete during the mixing process. The second method involves vacuum impregnating butyl stearate into lightweight aggregate which is then included in the concrete mix design. The primary aim of the study is to determine which method is the most effective way to improve the thermal mass characteristics of a concrete panel in the context of a …
Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods
Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods
Conference papers
This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …
"Defining Job Titles And Career Paths In Bim", Malachy Mathews
"Defining Job Titles And Career Paths In Bim", Malachy Mathews
Conference papers
Ireland is undergoing a digital transformation. Some industries particularly in the areas of travel and retail have been radically transformed. However many industries are facing their biggest challenge in their existence already weakened by the economic crisis and constrained by their legacy business, it will be difficult for them to adapt and embrace the new rules dictated by digital change. Irelands design and construction industry is on the cusp of a digital transformation with early adopters now deriving some benefits from a move to a building information modeling (BIM) process. Digital transformation cannot happen unless there are personnel with the …
Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods
Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods
Conference papers
This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Technological University Dublin since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" and …