Architecture Commons^™

Barriers To Use Of Cross-Laminated Timber In Maine, Shane R. O'Neill

Forest Resources Faculty Scholarship

To increase understanding of both the adoption rate and in-state manufacturing of mass timber In Maine, the 131^st Legislature and Governor Mills passed LD 881, a resolve directing a study of the barriers facing cross-laminated timber In Maine and provide recommendations to promote their use in construction. This study was developed in response to the resolve. The study engaged 108 unique participants to define available training, education, and experiences across the stakeholders throughout the building lifecycle process in the state.

From this information, the following five recommendations are proposed:

1. Understand the policies and initiatives of other states to develop …

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

An Investigation Into Ireland’S Bim Skills Gap, Guadalupe Centanni, Barry Mcauley

Conference Papers

The adoption of digital skills within the Irish AEC Sector has the potential to enhance efficiency and competitiveness among its stakeholders. Despite this opportunity, there is still a high demand for skilled BIM professionals, which cannot be currently met. To meet this skills demand and directly target future skills gaps within Ireland, several challenges must be addressed to facilitate broader BIM adoption. This paper focuses on addressing this gap by identifying steps to be followed to develop skilled professionals within BIM. This has been achieved by investigating the extent to which construction stakeholders in Ireland comprehend BIM and, examiningthe training …

Accelerating Bim Adoption In Ireland: A Ten-Year Review Of Cita Bim Gathering Proceedings, Alan Hore, Roger West, Barry Mcauley

Conference Papers

Digital construction interfaces have been studied extensively over the last few decades, with an ever-grow- ing catalogue of publications. The CitA BIM Gathering conferences have played a key role in bringing together the research and industry communities ina collaborative setting over the past decade in Ireland. In this paper the authors systematically review 10 years of papers published in the BIM Gathering pro- ceedings since the inaugural conference in 2013. A total of 175 papers involving over 200 authors have been reviewed and classified under the 2018 World Economic Forum (WEF) recommendations in respect to ac- celerating BIM adoption. The …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Skills Matter – Up-Skilling Across Construction Stakeholders For Emerging Roles, Avril Behan, Paul Mccormack, Barry Mcauley

Conference Papers

The EU’s Climate Target Plan To 2030 (European Union 2020b) of achieving at least 55% reduction in Green House Gas emissions from 1990 levels, delivering towards a climate-neutral economy by 2050, requires systems-level change in the way we design, construct, and operate our built assets. Funding initiatives, such as co-ordinated by BUILD UP Skills, aim to deliver upskilling to the market but targets set by the European Skills Agenda may not be reached at current achievement levels. This paper presents the results of one completed and the progress of one ongoing Horizon 2020 funded project, BIMcert and ARISE, respectively. Learning …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

How Can Visual Programing Be Used To Aid The Development Of A Structural Scheme Design Process Utilising Geometric Data Within An Architectural Revit Model?, Ed Carthy, Kieran Lakhera O'Shea

Reports

The early-stage structural scheme design of a building is a complex task requiring the collection of multiple information categories such as geometry, loading and materials. The collection and review of this information is traditionally conducted in a 2D environment. This is inefficient, time-consuming, and tedious. This paper provides a review of how structural engineers’ understanding and implementation of BIM has evolved significantly in recent years, validated by extant literature in areas such as BIM automation, visual programming, and structural optimisation in the structural engineering sector. Structural engineers are growing more aware that BIM provides a vast repository of data to …

Key Factors Affecting Labor Productivity In Offsite Construction Projects, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim Lascola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Offsite construction has been shown to possess many advantages and benefits in dealing with the construction industry's challenges, which include poor labor productivity. Nevertheless, all previous productivity-related research studies have focused mainly on factors impacting labor productivity in traditional stick-built construction methods. This paper filled this knowledge gap by following a multistep interrelated research methodology. First, a research team of 19 construction professionals and academics developed and distributed an industry survey to (1) quantify the likelihood of occurrence and relative impact of risk factors that adversely impact labor productivity in offsite construction projects; (2) identify and prioritize key risk factors …

An Updated Analytical Method For Predicting The Bracing Behavior Of Z-Purlin Supported Standing Seam Diaphragm Systems, Michael W. Seek

Engineering Technology Faculty Publications

Roof systems utilizing Z-purlins as a secondary member supporting a standing seam panel system are used extensively by the metal building industry. The Z-purlins rely on the diaphragm action in the standing seam panel system to provide lateral support and transfer forces to anchorages. The behavior of the standing seam system is highly nonlinear making prediction of the interaction between the Z-purlin and the standing seam system difficult. To better understand the behavior of the interaction between the purlins and the panel system, a series of non-linear shell finite element models were developed based on the test results of simple …

Identifying Design-Build Decision-Making Factors And Providing Future Research Guidelines: Social Network And Association Rule Analysis, Ramy Khalef, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There is a dire need to rebuild existing infrastructure with strategic and efficient methods. Design-build (DB) becomes a potential solution that provides fast-tracked delivery as a more time and cost-efficient project delivery method. Past research studied factors influencing DB but without providing a holistic analytic approach. This paper fills this knowledge gap. First, a systematic literature review is performed using the preferred reporting items for systematic reviews and meta-analyses techniques, and a set of factors affecting DB projects are then identified and clustered, using k-means clustering, based on the whole literature discussions. Second, a graph theory approach, social network analysis …

Critical Evaluation Of Time And Cost Of Terrestrial Laser Scanning For Construction Automated Qa Analysis, Joao Rocha, Davitt Lamon

Capstone Reports

Many governments agencies and private owners are demanding up-to-date information related to the current conditions of their facilities. Conventional QA is time-consuming and inefficient; thus, 3D terrestrial laser scanning (TLS) technology has been adopted due to the fast speed and high accuracy in acquiring data. Automated QA analysis can reduce the labour and time needed, reduce the costs, and improve the overall project efficiency. However, very few research efforts have been made to study the benefits of the automated QA analysis in a quantitative way. The process of the TLS-based geometric QA based in an automated data analysis process is …

Reducing Early-Age Shrinkage Cracks Of Bridge Decks And Rails, Soumitra Das, George Morcous, Jiong Hu

UNL Student Research Days Posters, Graduate

Early-age shrinkage cracking of concrete bridge decks and rails accelerates the penetration of water and chemicals which leads to reinforcement corrosion, delamination, and eventually spalling. All this results in shorter service life, road closure, and costly repair. Development of Low-cement concrete(LCC) mix to reduce early age shrinkage crack through aggregate grading optimization was done in this research work. This approach also reduces concrete cost ($15-$20/cyd) (15–25%) and its carbon footprint (≈15%).

Overcoming The Limitations Of The Green Pyramid Rating System In The Egyptian Construction Industry: A Critical Analysis, Ahmed Osama Daoud, Ayman Ahmed Ezzat Othman, Obas John Ebohon, Ali Bayyati

Architectural Engineering

Despite the tangible contributions of the construction industry to social development and economic growth, it is known for its natural resources overconsumption and solid waste (SW) generation both of which have major negative impacts on the natural environment. In the particular case of materials waste, the construction industry worldwide accounts for about 50% of global annual generated SW. In addition, construction materials may contribute up to 50% of the total project cost. Accordingly, the negative implications of the construction industry have compelled many nations to develop green building rating systems in order to preserve the environment, promote the economic efficiency …

Achieving Sustainability Through Reducing Risks During Architecture Design Process: A Lean Management Perspective, Sherouk Abdelrehim, Ayman Ahmed Ezzat Othman

Architectural Engineering

The construction industry, as one of the largest industries in the world, plays a critical role in achieving national and international social and economic sustainable development goals. Socially, it is concerned with delivering long-term projects that turn client and end-user requirements into designs that specify technical aspects, functional specific requirements, and standards of quality. Economically, the construction industry contributes to a country's gross domestic product (GDP) by creating jobs and providing the country's infrastructure. the construction industry's nature is more vulnerable than other industries. This is believed to be due to the complex and dynamic nature of construction projects, as …

Causes Influencing Construction Waste Generation During The Design Process: An Analytical Study, Aya Saad, Ayman Ahmed Ezzat Othman

Architectural Engineering

Despite the social and economic contributions of the construction industry towards achieving sustainable development objectives, it has an adverse effect on the environment such as the generation of waste, water, and energy consumption. Construction waste (CW) is the loss of materials that are produced during or after the construction process and has no remaining value. Several countries promote waste elimination plans at early stages to reduce CW at its source. The Egyptian government is expanding its investments in new mega projects and infrastructure facilities like new administrative capital, bridges, roads, energy projects which resulted in increasing the rate and amount …

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

Introduction To Prefabrication And Automation In Construction, Luciana Debs, Jiansong Zhang, Yunfeng Chen

School of Construction Management Technology Open Educational Resources

New developments and recent advances in construction methods have the potential to change the future of the architecture, engineering and construction industry. Prefabrication, along with modular construction, provides a safe and controlled environment for the production of building construction elements and raises the need for improved collaboration and coordination from design to manufacturing and from transportation to final assembly. Prefabrication also provides relief from the skilled construction labor shortage while opening up new opportunities for mass customization within the building industry. Prefabrication and modular construction automation are emerging expansion routes for the construction industry. In addition, integral to developing the …

Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore

Conference papers

As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …

Propositions For A Resilient, Post-Covid-19 Future For The Aec Industry, Hala Nassereddine, Kyung Wook Seo, Zofia K. Rybkowski, Christian Schranz, Harald Urban

Civil Engineering Faculty Publications

The coronavirus outbreak has challenged and continues to challenge every aspect of the supply chain within the AEC industry, forcing stakeholders to cope with increasing uncertainties and continuous change. The notion of resilience is especially salient now. While the need for the AEC industry to focus on resilience has been highlighted in recent articles, there is a need for a comprehensive discussion on what resilience means for the AEC industry and how companies can create built-in resilience. This paper takes the form of a high-level overview of where the industry is headed and aims to establish eleven propositions for a …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Aly Mousaad Aly, Faiaz Khaled

Faculty Publications

Large-eddy simulation (LES) has proven to offer superior accuracy in regards to predicting surface pressures compared to the Reynolds-averaged Navier Stokes (RANS) models. However, the primary impediment is the high computational cost associated with LES. The authors attempt to investigate the computational cost and accuracy by employing different sub-grid scale (SGS) models in LES and hybrid RANS-LES models. One of the prerequisites of accurate pressure estimations is to ensure a horizontally homogeneous empty computational domain. This study aims to compare the computational competence qualitatively and quantitatively using an empty domain in regards to the ability to maintain horizontal homogeneity. The …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

Facilitating The Industrial Sector's Adoption Of Collaborative Project Delivery Methods, Xavier Wood-Aliberch

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

In an effort to improve outcomes in the civil and healthcare sectors, clients have adopted collaborative project delivery methods for the delivery of their capital projects. The success stories in these sectors have gathered the attention of clients in the industrial sector, where cost and schedule overruns have become the norm. The central objective of this thesis is to help clients make the transition to this new type of project delivery.

This thesis was written in a three-paper format, where each paper addresses a challenge with the adoption of collaborative delivery methods. The first paper investigates what type of industrial …

A Hermeneutic Phenomenological Study Into The Impact Of Bim On The Social Dynamics Of The Aec Professional In The Workplace., Malachy Mathews Dr.

Doctoral

A review of the literature published surrounding new digital design and construction technologies and associated processes described within the Architecture, Engineering, and Construction (AEC) community as Building Information Modelling (BIM) or Virtual Design and Construction (VDC) reveals a gap in the theoretical understanding of the impact these technologies are having on professionals who work in this industry. The central aim of this research is to discover if there has been a shift in social dynamics as a result of the adoption of BIM in the workplace and, if there has been, to discuss the meaning of this for the industry …

Quantifying Materials Waste In The Egyptian Construction Industry: A Critical Analysis Of Rates And Factors, Ayman Ahmed Ezzat Othman, Ahmed Osama Daoud Dr., Obas John Ebohon, Ali Bayyati

Architectural Engineering

Construction and demolition waste (CDW) is a critical challenge facing the construction industry. It leads to deterioration of the triple bottom line of sustainability. Unfortunately, the CDW management research in Egypt lacks studies investigating (1) the variations in CDW generation (CDWG) among different types of construction projects, and (2) the factors affecting CDW reduction (CDWR). Based on a benchmarking approach, this research (1) quantifies CDW in terms of generation rates and costs among different construction project types in Egypt, and (2) investigates the relationship between CDWG and different adopted CDWR factors. Using structured interviews, a comparative case study was conducted …

To What Extent Can Innovative International Project Delivery Strategies (Which Leverage Bim) Improve The Cost Certainty Of Large Complex Public Procurement Projects In The Context Of Irish Public Procurement?, Bim Tudublin, Roqaya Abouklaib

Capstone Reports

Cost overrun is one of the biggest issues in the construction sector, and cost certainty is one of the main aims of the public construction sector in Ireland. Studies have shown that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. BIM, Lean, and IPD are independent methodologies that encourage collaborative work, and there are existent effective synergies among these concepts. The synergetic innovative international strategies were utilised for delivering large complex projects successfully globally, and many authors have studied large complex public projects that have adopted innovative international project delivery strategies collaboratively and have shown that the cost …

A Critical Analysis Of The Application Of Augmented Reality (Ar) For Monitoring And Documentation Of Construction Site Progress In The Irish Aec Industry., Bim Tudublin, Lukasz Sarnot

Capstone Reports

Sarnot, L. (2021) A critical analysis of the application of augmented reality (AR) for monitoring and documentation of construction site progress in the Irish AEC industry, Capstone Project from the MSc in aBIMM

A Critical Examination Of Visual Programming And Generative Design For The Compliance Checking Of Open Plan Office Layouts Against Hse Guidelines Post Covid-19., Bim Tudublin, Ronan Byrne

Capstone Reports

The purpose of this study is to explore the feasibility of Visual Programming (VP) and Generative Design (GD) in assisting employers review open plan office layouts against Ireland’s HSE guidelines implemented in May 2020 in response to Covid-19. The pandemic has affected all areas of life with workplace standards requiring a complete overhaul. This study will attempt to ascertain compliance with natural ventilation and social distancing requirements through the completion of an experimental research study, utilising Computational Design (CD) tools. A GD study will be undertaken to provide the designer with numerous office layout design solutions to evaluate and evolve. …