Architecture Commons^™

Xenabloom, Sophia Maglabe, Ryer Lauth, Elizabeth Shaw, Sheyna Rongong

Architectural Engineering

Proposal for an architectural and structural design of a shade structure at the Leaning Pine Arboretum, employing the Xenaform typology of Poly Shells, LLC.

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

Use Of Precious Plastic Method Of Bricks For The Construction Of Tiny Homes, Haylie E. Tallon

Architectural Engineering

Precious Plastics, a Netherlands based company, created an open source project that can be used to create different objects from recycled plastics. The San Luis Obispo area has a large amount of recyclable plastic that is being treated as trash, adding to the pollution of the ocean and the air. This project is to determine the necessary steps to create plastic building blocks, using the Precious Plastic process, as a construction material for low-income, temporary housing. This report covers the process that was used to build two of the machines that will be used to create the bricks. This requires …

Sage Garden Pavilion Shade Structure, Anthony Razouk Karroum, Manuel Bermudez, Matthew Kilbride, Sarah Holt, Marisa Martineau

Architectural Engineering

Form finding, testing, and construction of funicular double-layered shells in an interdisciplinary format with a focus on designing a shade structure for the San Luis Obispo Botanical Garden Children’s Pavilion. In the process, challenges such as connection design, materiality, storage, and more are explored and refined in relation to shell structures.

Guidelines For The Eeri Seismic Design Competition, Kate Robinson

Architectural Engineering

The Earthquake Engineering Research Institute (EERI) has been dedicated to exposing undergraduate students to the wide range of interdisciplinary subjects related to earthquake engineering through the Seismic Design Competition. In 2022, California Polytechnic State University, San Luis Obispo (Cal Poly) sent 14 students to Salt Lake City, Utah for the competition – to compete with 31 other teams who all tackled the competition problem statement uniquely. The 2022 team was tasked with the research, design, analysis, and construction of a new structure to be built in downtown Salt Lake City, with the goal of replicating the design sequence of real-world …

Analysis Of The Implementation Of Fluid Viscous Dampers In A Steel Special Moment Frame, Brad D. Weber

Architectural Engineering

This report examines the effects of adding fluid viscous dampers to a steel special moment frame through a series of analysis methods. Simple analysis procedures are first carried out and described, including a linear static procedure and a linear dynamic procedure. Then further analysis is carried out using a nonlinear dynamic analysis procedure. Multiple parameters are modified throughout the analysis processes to determine the impact on results and the data from all the analysis methods are compiled and used to demonstrate the overall impact of the use of fluid viscous dampers in a steel special moment frame.

The Nolan House, Keiko-Ann K. Sanders, Gilbert C. Munoz, Michael A. Bahr, Titas Kalvalnis

Architectural Engineering

As a precedent, The Green Team analyzed the history of glass architecture, literature, and culture. Based on our research, we found that glass is often depicted as breakable, delicate, and a way to expose or display aspects that would otherwise be hidden. We challenged ourselves to incorporate safety and privacy into our glass house as a way to combat the pre-existing notions of glass in architecture.

Journeyman International: Dwell Being Jonestown, Mississippi, Autumn Wagner

Architectural Engineering

Journeyman International is a non-profit organization that works with countries all over the world to support humanitarian projects by pairing clients with design professionals and volunteers to oversee the design and construction of projects. This specific project partners with Third Lens Ministries and But God Ministries, two organizations that are hoping to empower the community in Jonestown, Mississippi. Dwell Being promotes sustainability and affordable housing in a new housing community in Jonestown that is designed for healthy living and community interaction. Jonestown is a very small 0.4 square acre town that has roots in systemic racism and oppression. A once …

Reconceptualizing Mies' Glass House, Araceli Avelar, Armando Castaneda Jr, Madison Lam, Ignatius Malari, Alejo Favero, Augusta Orlauskaite, Ella Gleason

Architectural Engineering

Our team used the glass house studio to explore class stratification, particularly using the glass as a reflection of class dichotomy in our society. The glass and Miesian design approach glorifies the clean cut, picture-perfect utopia only accessible to the wealthy few. But reality proves that there is more to this. As architects and engineers, we should strive to create environments that may uphold our values of equity and diversity and ultimately serve all sectors of society.

Design And Construction Of Modular Concrete Footings And Testing Assembly For Use In Cal Poly's High Bay Laboratory, Thomas Little, Anders Johnson

Architectural Engineering

The purpose of this project was to improve the testing capabilities of the ARCE High Bay lab by designing and fabricating a pair of modular concrete footings along with a reusable testing frame capable of testing full-scale steel moment connections.

Tanzanian Concrete Masonry Walls, Edward J. Kaminski

Architectural Engineering

Walls that replicate masonry walls used in Tanzania are constructed and tested. The results from testing was compared with the respective predictions made using code guidelines from ASCE 7 and TMS 402.

Wine History Project Pavilion, Douglas Mcarthur

Architectural Engineering

The Wine History Pavilion Project is a continuing endeavor of Cal Poly students working on an exhibitive, traveling structure for the San Luis Obispo community. The project started during the 2019 Fall Quarter in the interdisciplinary Integrated Project Delivery (IPD) Studio and has progressed to the detailed design stage for its eventual fabrication and installation. This report discusses the detailed design stage that 4th year Architectural Engineering student, Douglas McArthur, worked on.

Folded! High-Rise, Alejandra Bravo, Riley Joseph Denis

Architectural Engineering

The authors of this report are undergraduate Architectural Engineering students at California Polytechnic State University in San Luis Obispo. This report documents their experience in an interdisciplinary studio of high‐rise building design and the process by which they produced a schematic design of a high‐rise residential building in San Francisco. It will address the organization of the studio, the development of concept as well as form and structure, the studies and structural analyses, as well as the review process and the competitions the final proposals were entered in, and include some final takeaways from each Architectural Engineering group member.

Analysis Of Burning Wood In The Transient State And The Application To Structural Design, Roberta Veliz, Kimberly Guzman

Architectural Engineering

Determining the extent of the contribution of exposed timber on compartment fire dynamics in open floor plans is a complex process. Designers traditionally used compartmentalization design methods which create spaces where flashover is likely, given the fuel load and ventilation conditions. However, due to the large geometric dimensions and spread of fuel, fires in open floor plans are more likely to remain as localized or traveling fires. As such, an understanding of not only ignition potential but also flame spread is critical to characterizing the contribution of exposed timber. An integral step in characterizing the potential contribution is through an …

The Aloe: High Rise Schematic Design And Analysis, Tony Duc Nguyen, Lilliann Lan Lai

Architectural Engineering

The authors of this document are architectural engineering (ARCE) undergraduate students from California Polytechnic State University, San Luis Obispo (Cal Poly). They joined the 2020 Skyscraper Collaboratory as part of the ARCE course 415: Interdisciplinary Capstone Project. This course emphasizes the analysis and evaluation of interdisciplinary challenges associated with integrating the design and construction processes to deliver a project with respect to the design, quality, and performance expectations for a client or presented criteria. The course was taught in collaboration with industry partners and associates from the global architectural, urban planning, and engineering firm Skidmore, Owings & Merrill (SOM). Instruction …

Piazza Di Ulivo: Arce Patio Redesign, Sophia Kim-Oanh Ha, David Colman

Architectural Engineering

Piazza de Ulivo was Phase 1 of a multi-quarter initiative to redesign and bring life to a patio space adjacent to Engineering West (Building 21) in Spring of 2020. Located within the central courtyard of Engineering West (Hasslein Garden), the patio space previously contained a senior project pergola that collapsed and has been removed. The remaining elements from this previous structure were an inverted moment frame consisting of five concrete columns and beams joining them. Additionally, a wooden bench with concrete pedestals remained under the shade of the existing olive tree. Desire within the Architectural Engineering (ARCE) department for the …

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Pedestrian Bridge In Tanzania, Maja Sagaser, Karina Rosales

Architectural Engineering

This senior project originated to address the need of the community of Same, Tanzania. There is a deep and wide ravine which floods, making the path many adults and children take to the Majevu Primary School increasingly difficult and dangerous. This report encapsulates all of the steps taken to complete an approved final design for a footbridge to be constructed over this ravine. It includes the project overview, the architectural and structural design process, as well as the important considerations. There are also structural drawings that include plans, elevations, and details.

Steel Test Set-Up For Non-Ductile Concrete Shear Walls, Colin S. Ridgley

Architectural Engineering

The purpose of this project was to provide a robust test set-up for the thesis work being conducted by graduate students, Jerry Luong & Rory de Sevilla. Their research aims to evaluate the feasibility of using fiber-reinforced polymer wraps and splay anchors to retrofit non-ductile concrete shear walls through a series of tests on reinforced concrete walls.

Four key constraints governed the design of the test set-up. First, the wall can be cyclically, laterally loaded to develop data for comparison with theoretical analysis methods. Second, the wall can be axially loaded to simulate interaction effects and prevent a sliding failure …

The Timber Buckling Restrained Brace Frame, Jessica Resta

Architectural Engineering

With the increasing awareness on the topic of earthquake resistance, efficient, cost-effective, and environmentally friendly solutions in the structural field are on the rise. The purpose of this report is to investigate the Timber Buckling Restrained Brace (TBRB), a new lateral-resisting element made of steel and lumber, applicable in residential and small commercial units. In addition to the TBRBs’ materials being readily available, the braces are easy to manufacture, reducing overall costs of production and transportation. The brace, made partly of wood, has also a low environmental impact when compared to other lateral force resisting elements like concrete shearwalls or …

Structural Analysis Of The High Bay Steel Reaction Frames, Jerry Hue Truong Luong, Garrett Michael Brown

Architectural Engineering

No abstract provided.

Implementing Subspace Identification On Shake Table Model, Zoe T. Cooperband

Architectural Engineering

Stochastic Subspace Identification is a field of applied mathematics that takes collected experimental time-history data and gives out information about the system that produced the data. SSI is typically used in control analysis but here we apply the methods to the modal analysis of structures. This senior project didn’t involve theory - instead much of the work was in research behind how Subspace Identification works, implementing the algorithm in MATLAB, and applying the program to shake table data to validate the program. In other words, building the framework to make SSI a usable tool and practical learning experience for other …

Shrinkage Cracking In Concrete Tilt-Up Construction, Stewart Hooks, Jack Robinson

Architectural Engineering

The purpose of this project is to investigate a particular, undesirable cracking pattern in concrete tilt-up panels that, until now, did not have a known definite cause. The cause of this cracking pattern is hypothesized to be due to shrinkage restraint of the concrete panels. The cracking under investigation occurs at the bottom corners of the Tilt-Up panels, suggesting that the base of the panel is restrained from shrinkage. This project models various components of Tilt-Up Construction that have potential for restraining the panels from shrinking. This project consists of the following main components.

The first aspect of this project …

Modular House Revival, Kevin Chiang, Spencer Dilley, Sarah Dowthwaite, Trevor Houghton, Ryan Lefebvre, Michele Leung, Cameron Lober, Chris Martinez, Katie Mayer

Architectural Engineering

The Modular House, located in Poly Canyon, has seen extensive damage since the last caretaker left nearly ten years ago. To prevent further damage and improve the safety and appeal of the structure, we are proposing a renovation of the existing building that removes the existing cladding and partitions. By the end of Spring Quarter 2017, the Modular House will have a guardrail system replacing the wood paneling on the walls and a new steel composite deck to replace the current flooring system. The structural steel framing system will remain as is.

Broad Street Apartments, Carla Alejandra Simental, Viviana C. Sanchez

Architectural Engineering

No abstract provided.

Experimental Building Demonstration Model With Viscous Fluid Dampers, Blake Thomas Reeve, Brianna Jean Kufa, Aden Malek Stepanians, Sophie Carmion Ratkovich

Architectural Engineering

The Architectural Engineering major places a heavy emphasis on structural dynamics and the role of wind and seismic loading in building analysis and design. Buildings of high importance that are critical to community function, such as hospitals, often utilize supplemental damping devices like supplemental viscous fluid dampers or base isolators to reduce the overall demands on the structural system. The design and analysis of these dampers are typically not taught at the undergraduate level, and is frequently performed by mechanical engineers, in lieu of structural engineers.

To better understand and research building behavior with supplemental damping devices, our multi-disciplinary team …

Structural Calculations For Nepal Vocational Learning Center, Nicholas Petrarca

Architectural Engineering

This project goal is to build a Leadership Vocational School for youth, women, differently abled, and local leaders of rural and Kathmandu Nepal. The client for this project is an organization called Sakcham Rural Nepal and they partnered with a humanitarian organization called Journeyman International to find Architecture and Architectural Engineering students to design a safe, attractive and functional building to fit their needs.

Material Sustainability, Jessica Meadows, Natasha Morris

Architectural Engineering

This paper addresses the sustainability of the materials used to construct buildings today. Timber, concrete and steel are analyzed for carbon output, cost, and recyclable-ability.