Architecture Commons^™

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Using Bim To Increase The Efficiency Of Energy-Driven Retrofitting Projects, Anne Grego, Shannon Chance, Barry Mcauley

Conference Papers

The building sector is responsible for nearly 40% of global energy consumption. Many existing buildings have poor thermal insulation and low energy performance, hindering sustainability goals. Energy-driven building retrofitting could address this issue and implementing Building Information Modelling (BIM) in retrofitting can reduce process time, costs, and waste associated with such undertakings. Yet, there is a lack of research and insufficient guidance for implementing BIM in energy-driven retrofitting. A BIM framework is presented to enhance decision-making processes during retrofitting. The aims of this study were to (1) identify BIM technologies and methodologies that could address existing barriers and improve efficiency …

The Neighborhood As An Energy-Generating Community The Case Of El-Banafseg Residential Neighborhood, East Cairo, Amany G. Micheal Prof., Mona Helmy Dr.

Centre for Advanced Materials

Nowadays, energy consumption is a global challenge. This is due to the shortage of several energy sources, and consequently, to their increasing prices. This paper argues that by using an integrative approach for using various energy harvesting techniques, a typical residential neighborhood can be operated as a self-generator of its needed energy, or part of it.

The paper follows a mixed qualitative, experimental, and numerical simulation approaches to examine the practicality of the paper hypothesis. It uses Space syntax modeling theory (a socio-spatial software) to analyze the pedestrian flow to indicate the potential locations of the kinetic energy harvesting Piezoelectric …

Properties Of Cement Mortar Containing Recycled High-Density Polyethylene (Hdpe), Amany G. Micheal Prof., Esraa Torky, Merna Amir

Centre for Advanced Materials

Millions of tones of plastic waste are generated globally and only less than 10 per cent has been recycled. It is crucial to segregate and circulate plastic waste and repurposing it for countless other uses. There are many ways to repurpose and reuse these discarded plastics. One use that can be examined is the use of plastic as partial sand replacement in mortar. To contribute to this important and valid discourse, the research studies the mechanical and thermal properties of recycled HDPE mortar as an active way of integrating plastic waste into the construction industry to partially eliminate some of …

Thermal Efficacy Of Green Walls In Building Structures In The Northeast United States, Nathaniel Wright

Student Showcase

Climate change is one of the most threatening issues that humankind faces in the 21st century and there is indisputable evidence that our planet is experiencing global temperature rise, shrinking of ice sheets and sea level rise, warming oceans, and extreme weather events at an alarming rate. Urbanization drives these changes and creates the Urban Heat Island (UHI) effect. One method to mitigate this issue is urban greening, specifically the construction of green walls which take advantage of unused vertical exteriors of buildings. Despite existing literature on green walls especially in Europe and Asia, green walls must be researched more …

Using Remote Sensing Technologies In Relocating Lubrak Village And Visualizing Flood Damages, Ronan Wallace

Independent Study Project (ISP) Collection

As weather patterns change across the world, there are communities impacted by climate change that are left unnoticed. In the Himalayan mountain range, communities have suffered, experiencing an increase in flash flooding and droughts. For Lubrak Village in Lower Mustang, the community faces the threats of flash flooding. Over the last ten years, the amount of flash flooding has increased, occurring more than once each monsoon season. After every flood, concrete-like sediment is left behind, hardening across the riverbed and increasing its elevation. As the riverbed elevation increases, this sediment encroaches on Lu-brak Village’s agricultural fields and ancient mud buildings, …

Design, Development, And Characterization Of Highly Efficient Colored Photovoltaic Module For Sustainable Buildings Applications, Mohammad Khairul Basher, Mohammad Nur-E-Alam, Momtazur Rahman, Steven Hinckley, Kamal Alameh

Research outputs 2022 to 2026

The building integrated photovoltaic (BIPV) system is one of the contributors which has enormous potential to reach the goal of net-zero energy buildings (NZEB) that significantly reduce the use of fossil fuels that contribute to global warming. However, the limitations of the visual and aesthetic appearance of current BIPV systems make this aspiration unlikely. This study investigates the limitations of the single-color-based PV modules that are dull in appearance and have low photo-conversion efficiency (PCE). In order to solve this issue, we designed, developed, and characterized micro-patterned-based multicolored photovoltaic (MPCPV) modules which are applicable to net-zero building and development. Our …

Cruser Place Green Streets Plan, Neal Friedman

Master of Urban and Regional Planning Capstone Projects

Combining green and complete street design techniques leads to multiple environmental, social and economic benefits that often enhance each other's effectiveness. In urban areas confronting increased pressures of sea level rise, green streets, which incorporate landscaped features or vegetative areas to manage stormwater within the right of way, can be crucial pieces of pedestrian oriented urban design and multimodal planning frameworks that consider and plan for diverse, complementary transportation options. This plan works with the Colonial Place and Riverview Civic League as well as the Norfolk Preservation Collective to come up with green street design recommendations in order to strengthen …

Building Performance - Societal Drive, Programme And Symposium, Joseph Little, Patrick Daly

Articles

Society is increasingly looking at the construction industry to mitigate the environmental crisis and solve the housing crisis through wholesale embrace of three broad sets of challenges. The MSc in Building Performance (Energy Efficiency in Design) (MSc BP(EED)) was created in 2017 to provide significant upskilling in the knowledge, skills, and software applications of building design professionals so that they can meet these challenges, while creating compliant, sustainable, super-low energy, new and renovated buildings. The delivery of the programme supports upskilling of employed building design professionals at Masters level, encouraging a minority to develop their capacity and interest in research …

Causes Influencing Construction Waste Generation During The Design Process: An Analytical Study, Aya Saad, Ayman Ahmed Ezzat Othman

Architectural Engineering

Despite the social and economic contributions of the construction industry towards achieving sustainable development objectives, it has an adverse effect on the environment such as the generation of waste, water, and energy consumption. Construction waste (CW) is the loss of materials that are produced during or after the construction process and has no remaining value. Several countries promote waste elimination plans at early stages to reduce CW at its source. The Egyptian government is expanding its investments in new mega projects and infrastructure facilities like new administrative capital, bridges, roads, energy projects which resulted in increasing the rate and amount …

Indoor Air Quality Through The Lens Of Outdoor Atmospheric Chemistry, Jonathan P.D. Abbatt, Douglas B. Collins

Faculty Contributions to Books

Outdoor atmospheric chemistry and air quality have been the topic of research that intensified in earnest around the mid-20^th century, while indoor air quality research has only been a key focus of chemical researchers over the last 30 years. Examining practices and approaches employed in the outdoor atmospheric chemistry research enterprise provides an additional viewpoint from which we can chart new paths to increase scientific understanding of indoor chemistry. This chapter explores our understanding of primary chemical sources, homogeneous and multiphase reactivity, gas-surface partitioning, and the coupling between the chemistry and dynamics of indoor air through the lens of …

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore

Conference papers

As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Aly Mousaad Aly, Faiaz Khaled

Faculty Publications

Large-eddy simulation (LES) has proven to offer superior accuracy in regards to predicting surface pressures compared to the Reynolds-averaged Navier Stokes (RANS) models. However, the primary impediment is the high computational cost associated with LES. The authors attempt to investigate the computational cost and accuracy by employing different sub-grid scale (SGS) models in LES and hybrid RANS-LES models. One of the prerequisites of accurate pressure estimations is to ensure a horizontally homogeneous empty computational domain. This study aims to compare the computational competence qualitatively and quantitatively using an empty domain in regards to the ability to maintain horizontal homogeneity. The …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

A Critical Examination Of Visual Programming And Generative Design For The Compliance Checking Of Open Plan Office Layouts Against Hse Guidelines Post Covid-19., Bim Tudublin, Ronan Byrne

Capstone Reports

The purpose of this study is to explore the feasibility of Visual Programming (VP) and Generative Design (GD) in assisting employers review open plan office layouts against Ireland’s HSE guidelines implemented in May 2020 in response to Covid-19. The pandemic has affected all areas of life with workplace standards requiring a complete overhaul. This study will attempt to ascertain compliance with natural ventilation and social distancing requirements through the completion of an experimental research study, utilising Computational Design (CD) tools. A GD study will be undertaken to provide the designer with numerous office layout design solutions to evaluate and evolve. …

Opportunities In The Irish Reinforced Concrete Industry For Lean And Bim Adoption, Bim Tudublin, Kieran Mcconnell

Capstone Reports

The Irish Reinforced Concrete (RC) sector has yet to realise the full potential of Building Information Modelling (BIM) and Lean construction. The positive impacts and benefits of both BIM and Lean in the wider Architecture, Engineering and Construction sector are widely recognised; many of these are transferable to the RC sector, but there is limited research and knowledge on practical transference, uses and advantages. This research aims to fill some of the existing knowledge gaps by examining BIM and Lean adoption and awareness in the Irish RC sector across sub-sectors, professions, and organisational levels, and by exploring opportunities for increasing …

To What Extent Can Lean Construction Processes And Principles Be Utilised In The Design Stage Of A Bim Project In The Irish Design And Construction Industry, Bim Tudublin, Barry Sheramn

Capstone Reports

Although different in many ways, Building Information Modelling (BIM) and Lean Construction are two processes that are having a significant impact on the Design & Construction Industry. In recent years, the Irish AECO industry has seen a tenfold increase across numerous construction disciplines with the adoption of new workflows and processes centred around both BIM and Lean methodologies. Existing literature identifies a strong synergistic relationship between the two processes and highlights the opportunity for Lean processes and principles to be implemented into the design stage workflow. This paper investigated existing literature relating to several lean processes currently implemented in the …

Should Acoustic Simulation Technology Be Utilised In Architectural Practice? Does It Have The Potential For Bim Integration?, Bim Tudublin, Keith Harvey

Capstone Reports

The research presented in this paper, firstly, aims to convey the importance of our acoustic environment through focusing on the effects of undesirable acoustic conditions on cognitive abilities in spaces where cognitive performance is of the utmost concern, our learning environments. Secondly, it aims to investigate current state-of-the-art acoustic simulation methods, available platforms, and their levels of interoperability with architectural BIM authoring software. Structured interviews were carried out with 7 Irish architects and architectural technologists to determine if a disconnection between architectural design and acoustic performance exists and to identify the advantages and disadvantages of current workflows for acoustic performance …

Environmental Soft Law As A Governance Strategy, Cary Coglianese

All Faculty Scholarship

Soft law governance relies on nongovernmental institutions that establish and implement voluntary standards. Compared with traditional hard law solutions to societal and economic problems, soft law alternatives promise to be more politically feasible to establish and then easier to adapt in the face of changing circumstances. They may also seem more likely to be flexible in what they demand of targeted businesses and other entities. But can soft law actually work to solve major problems? This Article considers the value of soft law governance through the lens of three major voluntary, nongovernmental initiatives that address environmental concerns: (1) ISO 14001 …

Investigating The Experimental Process For Partial Replacement Of Cement With Sugarcane Bagasse In The Construction Industry, Amany G. Micheal Prof., Rania Moussa, Nadin Dawoud

Centre for Advanced Materials

In the last few decades there has been speedily increasing in the agriculture and industrial wastes. This causes many environmental issues and raises the potential to contaminate the natural resources of living such as water, air and soil. Recently, the amount of organic waste produced daily has been rising, while it is poorly managed. It is either burned or disposed improperly, which effect negatively the environment and public health. On the other hand, during the cement production process many wastes, and pollutants are generated which have major negative impacts on the environment. Cement is considered as a substantial constituent of …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

A Critical Examination Of The Use Of Business Intelligence (Bi) In The Optioneering Of Generative Design Models: A Case Study., Bim Tudublin, Davitt Lamon

Capstone Reports

This research outlines the development of a generative des ign workflow for the architectural space planning of a 1,200 sq.m office located in Dublin, Ireland, and the application of statistical analysis and data visualisation for the optioneering of gen erated models. First, the paper defines a computational desig n model with the potential to generate a variety of office layouts, including circulation routes and desk locations. It then identifies three unique performance metrics that evaluate each design option. Finally, the study applies a multi objective genetic algorithm (MOGA) to explore the high dimensional design space of all potential options and …

An Investigation Into Solid Waste Problem In The Egyptian Construction Industry: A Mini-Review, Ahmed Osama Daoud, Ayman Ahmed Ezzat Othman, Herbert Robinson, Ali Bayyati

Architectural Engineering

Solid waste management (SWM) is one of the most critical global challenges nowadays. It has a severe negative effect on the triple bottom line of sustainability. Construction and demolition waste (CDW) contributes about 50% of the total global annual generated SW. In the particular case of the Middle East and North Africa (MENA) region including Egypt, the SW problem has become a major challenge, and the need to find sustainable solutions is overwhelming. However, the region faces several challenges that hinder the development of an effective and efficient SWM system. This has resulted in the predominance of unsustainable SWM practices …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West

Conference papers

Like most sectors in today’s working world, construction businesses are challenged to work in an increasingly digitised world with sophisticated demands from intelligent clients. So much has been written about the inefficiencies of the construction industry, its fragmentation, lack of collaboration, low margins, adversarial pricing, poor productivity, financial fragility, lack of research and development, poor industry image and relatively weak use of digital solutions. The Irish government recognises the importance of digital innovation to address many of the challenges the construction industry faces. With recent high profile reports of escalating spend on signature public sector projects and weak productivity performance …

An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre

Conference papers

Previous research has established that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. While Lean Construction, Building Information Modelling (BIM), and Integrated Project Delivery (IPD) can all be viewed as separate processes which add independent value to a project, they are more effective when used in partnership with each other. In order to ensure the high levels of collaboration expected for these processes to work in unison, the early involvement of the Contractor is paramount. Early contractor involvement within the design process can ensure a more focused integrated project team, improvement of both constructability and cost certainty, as …