Architecture Commons^™

The Current State Of Practice Of Building Information Modeling, Kevin P. Brooks

Masters Theses

Building Information Modeling (BIM) has become extremely prominent in the construction industry in the past twenty years. It serves as a digital repository that can, when used to its fullest potential, combine all aspects of designing, building, and managing a structure in one place, alongside all the data produced in those processes. The construction industry has to date struggled to increase productivity alongside similar fields, such as the manufacturing industry, though the construction industry generally has far more stakeholders on one project than the manufacturing industry. Further, building designs are becoming more complex while project schedules are becoming tighter. As …

Improving Energy Efficiency Of School Buildings With Solar-Assisted Cooling For The Maldives, Ahmed Fathhee

Masters Theses

Anthropogenic activities are responsible for the impact of global climate change because of burning fossil fuels releasing harmful gases into the environment. As a result, the global temperature has risen about 1.18 °C since 1880, causing the global sea level to rise by 178 mm over the past century. This is a threat to countries that are closer to the ocean, especially the low-lying countries such as the Maldives. It is predicted if the sea level keeps rising, most of these islands could be below sea level by 2030.

The Maldives has a tropical climate requiring cooling to achieve thermal …

Wast3d Potential, Andrew Larsen

Masters Theses

Waste is obsolete. Standard building industry practices are harmful to the environment. Non-traditional construction methods were examined as alternatives. Circular design logic was the guiding principle in material choice. Additive manufacturing is a proven modern method for building construction. Research on 3D printing case studies revealed that recycled plastic is a proven material and readily available. Removing plastic waste from the environment and sequestering it in architectural components gives the material a new purpose. The component of focus was a building block for a wall assembly. Inspiration was taken from the hexagonal Basalt rock formations found near volcanic fault lines. …

Interactive Architecture - Intervention Of Virtual Business On Commercial Space, Yihao George Xu

Masters Theses

Traditional mall-based restaurants, such as P.F. Chang’s in the Providence Place Mall, have primarily focused on site-based dining and bar services. However, the food provided by this chain restaurant often lacks depth, and customers seldom learn the story behind the dishes. This thesis explores the integration of mixed reality technology within the physical environment of P.F. Chang’s, an American Chinese restaurant chain with over 300 locations, aiming to transform it into an authentic Shanghai food culture experience. This experience combines virtual and physical stimuli to evoke various periods of Chinese history, providing a unique encounter for customers.

The proposed transformation …

Tall Timber In Denver: An Exploration Of New Forms In Large Scale Timber Architecture, Andrew P. Weuling

Masters Theses

Wood has been utilized by humans for thousands of years in the construction of our built environment. More recently, our expanded understanding of the material and the advancement of engineered wood have allowed us to use wood like never before. Concrete and steel, however, have emerged as the main materials used in large scale construction in the late 19^th and 20^th Centuries. As we are battling and searching for solutions to climate change, the importance of wood in large scale construction has increased as not only is its carbon intensity is lower than steel and concrete, but its …

Optimization Of Thermal Energy Storage Sizing Using Thermodynamic Analysis, Andrew Villanueva

Masters Theses

The aim of this thesis is to examine the effect that Thermal Energy Storage (TES) sizing has on a building’s ability to meet heating and cooling demands in an energy and cost efficient manner. The focus of the research is the quantification the effects of TES for system sizing and boiler cycling. Research is accomplished by modelling TES systems with various storage capacities using thermodynamic analysis. Energy costs are subject to increase during peak usage periods due to a limited supply of energy. Peak heating and cooling periods also force thermal systems to be sized for loads that are only …

Evaluating The Impact Of Double-Parked Freight Deliveries On Signalized Arterial Control Delay Using Analytical Models And Simulation, Aaron J. Keegan

Masters Theses

Freight deliveries on signalized urban streets are known to cause lane blockages during delivery. Traffic congestion associated with urban freight deliveries has gained increasing attention recently as traffic engineers and planners are tasked with finding solutions to manage increasing demand more sustainably with limited road capacity. The goal of this research is to evaluate two models for quantifying the capacity and signalized control delay effects of a lane-blocking freight delivery on an urban arterial. The two methods are: an All-or-Nothing model similar to methodology used in the Highway Capacity Manual 6^th Edition, and a Detailed model consistent with kinematic …

From Architectural Design To Structural Analysis: A Data-Driven Approach To Study Building Information Modeling (Bim) Interoperability, Mohammed Aldegeily

Masters Theses

BIM has been playing an essential role in building construction projects in recent years. It was used to automate many tasks such as clash detection, 4D planning, and quantity takeoff, among others. However, the interoperability of BIM still lacks in many fields across the architecture, engineering, and construction domains. This research studies the interoperability between architectural design and structural analysis. The goal is to explore structural analysis of BIM models through data transfer processes between different software platforms via three types of paths: (1) Application Programming Interface (API); (2) “immediately connect,” which is the direct link between software programs from …

Extending Time Series Forecasting Methods Using Functional Principal Components Analysis, Isaac Michael Wagner-Muns

Masters Theses

"Traffic volume forecasts are used by many transportation analysis and management systems to better characterize and react to fluctuating traffic patterns. Most current forecasting methods do not take advantage of the underlying functional characteristics of the time series to make predictions. This paper presents a methodology that uses Functional Principal Components Analysis (FPCA) to create smooth and differentiable daily traffic forecasts. The methodology is validated with a data set of 1,813 days of 15 minute aggregated traffic volume time series. Both the FPCA based forecasts and the associated prediction intervals outperform traditional Seasonal Autoregressive Integrated Moving Average (SARIMA) based methods"--Abstract, …

Developing An Ecological Sanitation Transect, Ian Kolesinskas

Masters Theses

A sanitation problem exists for people across the globe: basic human waste collection and treatment is inaccessible to much of the world’s population; and the status-quo gray infrastructure system of sanitation is unsustainable and unsuitable for widespread application. A paradigm shift is needed: this thesis makes the case for developing an Ecological Sanitation Transect to bring back the closed loop that connects consumption, waste excretion, sanitation, and food production. The Ecological Sanitation Transect is a synthesis of ecological sanitation, where human excreta is reused, and the urban transect, where development density is conceptualized along a continuum from rural to urban. …

Assessing Downstream Stormwater Impacts For Urban Watershed Planning, Johanna Meyer Pavlowsky

Masters Theses

"The urbanization of watersheds has caused debilitating effects to downstream aquatic ecosystems in catchments and streams. The implementation of green infrastructure (GI), such as permeable pavements and bioretention facilities, has been shown to alleviate these effects by both reducing runoff and mitigating pollutants; however, the implements are often not designed with a specific goal of water improvement. This study targets understanding a small, impaired urban watershed, and the benefits green infrastructure may have to provide environmental, social, and economic improvement to the watershed.

Portions of Rolla including much of the S&T campus drain into the impaired urban waterbody Frisco Lake, …

Integrating Engineering And Social Aspects In Selecting Stormwater Control Measures (Scms), Maudy Indriani Budipradigdo

Masters Theses

The Low Impact Development (LID) approach to stormwater management is rapidly becoming the required replacement for the traditional approach of development design, solely for peak runoff attenuation. Stormwater Control Measures (SCMs) used in LID designs are some combination of physical structures and /or agronomic practices designed to capture runoff, remove pollutants, promote groundwater recharge, and protect receiving streams from channel degradation. The LID approach has been studied and documented in many journals and design manuals, but we know of no comprehensive study that combines the engineering (hydrologic performance requirements) and social aspects (complementary requirements) of the approach. SCMs have historically …

Prioritizing Stormwater Management: Comparing Integrated Best Management Practices In Urban And Suburban Neighborhoods, Danielle Kathleen Norman

Masters Theses

This thesis demonstrates a comparison of two design proposals that integrate Best Management Practices to address stormwater runoff volumes in urban and suburban neighborhoods. The thesis investigation includes the selection and comparison of two diverse neighborhoods to inform design decisions. It then assesses the environmental, social and economic implications of the design proposal in each neighborhood.

The site selection process is a method that overlays specific criterion such as residential land use, topographic features, and median household income (3) nested scales; the watershed scale, the sub-watershed scale, and the neighborhood scale. For the purposes of this paper, nested scales are …

A Life Cycle Comparison Of Light-Frame Wood And Insulated Concrete Form Building Envelopes: Energy Use And Green House Gases, Sherman Authur Matthews

Masters Theses

Given the building sector’s substantial contribution to global energy use and green house gas (GHG) emissions, it is of great importance that only the most effective building envelopes are utilized. Conventional light-frame wood building envelopes are highly popular due to their ease of construction and building economy; however the life cycle performance of the building envelope is often overlooked when this selection is made. Although insulated concrete form (ICF) building envelopes generally require a substantially higher embodied energy input, it should be considered that improvements during a building’s operation phase can offers significant energy returns, ultimately reducing the building’s life …

Future Housing In The United States: Senior’S Housing Demand, Sandeep Singh

Masters Theses

In the United States, persons born between 1942 and 1964 are within 10 to 15 years of traditional retirement age and are identified as baby boomers. The data shows that the number of persons aged 65 years and older have grown from 10 percent of the population in 1970 to nearly 13 percent in 1996. Furthermore, the population that is 65 years old or older is projected to be 20 percent of the population in 2030. As a result, the demographic change nurtures a demand for senior’s housing.

On the other hand, the concern is for the elderly living in …