Architecture Commons^™

Building Services Engineering March/April 2024

Building Services Engineering

No abstract provided.

Synthesis And Characterization Of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites, Fatemeh Mahdiyeh-Boroujeni, Gabriella Fioravanti, Ronald Kander

School of Design and Engineering Papers

The pursuit of an environmentally sustainable manufacturing process requires the substitution of less damaging and recyclable solutions for harmful reagents. This study aims to assess the effectiveness of using cellulose microfibrils synthesized via different hydrolysis reactions as reinforcing agents in polyvinyl alcohol (PVA) at varying concentrations. The investigation explores the morphology, thermal properties, and chemical behavior of the cellulose particles. The cellulose microfibrils (CMFs) produced using citric acid exhibited the highest yield and aspect ratio. Notably, particles from organic acids demonstrated greater thermal stability, with oxalic acid-derived particles displaying the maximum thermal degradation temperature. Subsequently, cast films of PVA reinforced …

Building Services Engineering January/February 2024

Building Services Engineering

No abstract provided.

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Information Management And Bim Standards And Supports Inventory, Ryan Dempsey, Barry Mcauley, David Burke

Tools

The Digital Standards pillar consists of industry experts who champion the benefits of common rules, guidelines, and workflows that facilitate the improvement of information flow and information management across asset life cycles. Digital standards provide a common language that can be translated to technical specifications enabling clients, designers, contractors, and facilities managers, irrespective of their preferred tools, to communicate efficiently and reduce cost, rework, and disputes. Working closely with the Digital Procurement and Digital Education and Training pillars, this pillar is developing and delivering Irish Information Management/BIM (Digital Construction) guidelines for the sector.

This report summarises existing digital construction standards, …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Building Services Engineering November/December 2023

Building Services Engineering

No abstract provided.

Building Services Engineering September/October 2023

Building Services Engineering

No abstract provided.

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Building Services Engineering July/August 2023

Building Services Engineering

No abstract provided.

Attainable And Sustainable Home Building Solutions, Katrina Matthews

Construction Management

Sustainability has fortunately been a recent concern in the construction industry as climate change continues to impose potentially insurmountable threats to the global environment. Although many new methods have been adopted in efforts to lessen the adverse environmental effects of construction-related activities, as a society, we still have much room for growth as the built environment accounts for almost 50% of global emissions. Many changes and standards must be adopted to make these solutions efficiently beneficial. To set industry standards, we must start with the most basic form of construction- residential building. This report covers two attainable framing solutions for …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Out-Of-Plane Flexural Behavior Of Insulatedwall Panels Constructed With Large Insulation Thicknesses, Jacob Luebke, Fray F. Pozo-Lora, Salam Al-Rubaye, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Insulated concrete sandwich wall panels (ICSWPs) are gaining popularity as energy regulations become stricter worldwide. ICSWPs are now being constructed with thinner wythes and thicker insulation to keep up with the changing market, which is reducing material costs and increasing thermal and structural efficiency. However, there is a need for adequate experimental testing to validate the current design methods for these new panels. This research aims to provide that validation by comparing the predictions of four different methods with experimental data obtained from six large-scale panels. The study found that while current design methods adequately predict the behavior of thin …

Building Services Engineering May/June 2023

Building Services Engineering

No abstract provided.

A Review On Sustainable Disposal Of Plastic Waste By Integration In Construction Materials, Yara S. El-Metwally, Iman El-Mahallawi, Khaled M. Dewidar, Mostafa R. Refaat

Architectural Engineering

Over the last decades, plastic waste (PW) has increased exponentially and has become a serious threat to our planet, aquatic system and human health. Recycling or reusing PW in producing ecofriendly materials is an efficient solution to reduce plastic pollution and to minimize the depletion of raw materials as well. Previous studies have shown promising potentials of using PW in the construction sector, such as binder, aggregate, or substitute of cement and sand in concrete, brick or mortar. Laboratory results indicate that implementing plastic waste as aggregates in cement composites obtains higher thermal resistance and acoustical performance. However, a reduction …

Zero Net Energy Test House, Timothy Hemsath, James D. Goedert, Avery Don Schwer, Yong Cho

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper describes the first phase of a residential research program to reduce the impact of new construction on the environment through research and education using a Zero Net Energy Test House as a framework. Containing four bedrooms, three and a half baths, the 1,800 square foot house, 1,000 square foot basement, is located in Omaha, Nebraska. It is being used to validate several research projects and provides a platform for applications research of a number of technological advances. Laminated photovoltaic solar panels, a wind turbine, and an occupant monitoring energy control system are some of the sustainable design innovations …

Electrochromic Windows: Return On Investment Analysis, Thomas Michael Caprio

Construction Management

In recent years, sustainability in construction has become a topic of undeniable interest. With sustainability certifications becoming more prominent and desirable, members of the construction industry have begun to seek alternatives for standard systems to keep up with market trends. One of the main issues that the construction industry faces is accessibility of technology. While there are new products and technologies being released frequently, members of the construction industry lack knowledge on the specific details and implications of working with newer systems. One piece of technology that was recently introduced is electrochromic glass, or smart glass. Electrochromic windows analyze sunlight …

Proposal For Adobe Earthbag Disaster-Relief Structure, John Camacho

Construction Management

The science behind creating an adobe house has been around for thousands of years; the primitive mixture contains only dirt, water, and straw. Left to cure in bricks or as a single cast-in-place system, the structure will provide long-lasting protection from the elements. Science has taken this a step further with the introduction of cementitious admixtures and reinforcement. The result is an adobe structure with exemplary thermo-retentive properties and load-bearing capabilities. This project provides an analysis on the “SuperAdobe” earthbag system that has been put into practice by independent contractors and housing-relief initiatives. The goal of the project was to …

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson

CSU Journal of Sustainability and Climate Change

Universities across the United States are generating goals to be more sustainable and carbon neutral. The energy used in existing buildings on campuses amount to a large volume of greenhouse emissions and must be reduced to help achieve neutrality goals. Strategic Energy Master Plans are instrumental to support these goals through the development of recommendations to reduce energy. Calculating the energy use intensity for existing buildings, a main component of a Strategic Energy Master Plan, can help the campus understand where energy is being used the most. With this information the highest energy consuming buildings can be the focus of …

Risks Of Innovation In The Architectural Design Process In Egypt: An Investigative Study, Rawan Medhat, Ayman Ahmed Ezzat Othman

Architectural Engineering

Achieving sustainability in construction projects is becoming an increasing priority worldwide. Being one of the crucial phases of the construction process, the design process plays a major role in achieving the goals of sustainability. Adopting innovative design solutions is a promising way of enhancing the sustainable performance of buildings. However, the implementation of innovative solutions is risky and needs to be managed carefully to avoid failure. Due to the increasing number of construction projects being developed in Egypt and because of the need to achieve the Sustainable Development Strategy (SDS) 2030, adopting innovative solutions became an essence. Accordingly, this research …

Potentials Of Containers In Creating Modular Architectural Spaces, Karim Al-Khatib, Jinan Makkawi, Ali Kobeissi

Architecture and Planning Journal (APJ)

Containers are currently considered as one of the inventive trends of framing architectural objects. Container architecture is defined as the type of architecture that is characterised by the usage of steel containers as a structural elements and architectural envelope that can be presented as a part of architecture or a function that an activity can happen in it. Due to the specific dimensions that the container has, architects tend to use it to obtain modularity in their projects and the modular design strategies refer to using the containers as a standard unit to carry out the process, these containers are …

Performance Evaluation Of A Prestressed Belitic Calcium Sulfoaluminate Cement (Bcsa) Concrete Bridge Girder, Nick Markosian, Raed Tawadrous, Mohammad Mastali, Robert J. Thomas, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Belitic calcium sulfoaluminate (BCSA) cement is a sustainable alternative to Portland cement that offers rapid setting characteristics that could accelerate throughput in precast concrete operations. BCSA cements have lower carbon footprint, embodied energy, and natural resource consumption than Portland cement. However, these benefits are not often utilized in structural members due to lack of specifications and perceived logistical challenges. This paper evaluates the performance of a full-scale precast, prestressed voided deck slab bridge girder made with BCSA cement concrete. The rapid-set properties of BCSA cement allowed the initial concrete compressive strength to reach the required 4300 psi release strength at …

Brazil, Big Hydro, And A Beautiful Monster: “Green” Energy Generation In The Xingu River Basin, Ian F. Hirons

Student Works

Brazil is quickly becoming an influential actor on the world stage of geopolitics. The nation has achieved global economic and environmental recognition due to the extensive development of its hydrological resources in the form of hydroelectric power plants. As the world’s second greatest generator of hydroelectricity, Brazil has proven a staunch adherence to building dams in the large-scale. Though these dams have brought electricity to millions of people across the country, the socio-ecological toll inflicted by their construction has been devastating to natural biomes and local inhabitants. This article traces Brazil’s proclivity for large-scale hydropower to four motivational categories often …

Case Study: Google’S Unique Canopy Styled Construction, Ray A. Cuevas

Construction Management

In today’s rapidly changing world, builders are pushing to implement more sustainable practices and incorporate innovative techniques to integrate green practices into their structures. One of the latest examples of this push towards sustainability is seen in Google’s new headquarters, Charleston East located in Mountain View, California. Combining their widely known mission to provide a positive work environment for their employees with their passion to be more environmentally friendly, Google has set out to create a Living Building with LEED Platinum certification. In order to accomplish this Google has collaborated with Bjarke Ingels Group, Heatherwick Studio, and Hathaway Dinwiddie. The …

Design Out Waste As An Approach For Achieving Sustainability In Egyptian Housing Projects, Laila Elsawaf, Ayman Ahmed Ezzat Othman

Architectural Engineering

Housing projects have been increasing rapidly during the previous years to fulfil community needs and achieve the national and international sustainable development objectives. Due to their nature, housing projects generate a significant amount of waste that accounts for approximately 40% of the solid waste that the construction industry generates annually. Many of these wastes are a result of inappropriate decisions adopted during the design process such as using non-sustainable materials and inefficient use of natural recourses. Meanwhile, research has revealed that achieving sustainability within housing projects is a crucial challenge, yet an essential one. This called to think differently and …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Solar & Rain Catching Canopy "Urban Oasis 2", Afolabi Ibitoye, Cheriyah Wilmot, Alexander Aptekar, Grzegorz Kosieradzki, Kaiyrgul Sultanova, Jude Vallon

Publications and Research

The accumulation of water runoff during rain storms is a major problem in New York City’s combination water systems, forcing water treatment plants to release untreated excess water. To avoid overfilling of the sewer system by this grey water, pocket parks and gardens will be used to absorb the excess rainfall. We will be harnessing nature’s resources with current technologies such as: solar panels combined with rain catching canopies, to beautify the environment, educate the public about sustainability, stimulate growth to local businesses through increased foot traffic and bringing social awareness on environmental issues.

The canopies are designed to collect …

An Investigation Of Sustainability Issue For Building Construction In North Cyprus, Hasan Samih Kalwry M.Sc., Halil Zafer Alibaba Associate Professor

Journal of Environmental Sustainability

The action of construction it is perceived to have a significant influence on the environmental assessment. In spite of the confession that environmental issues are significant in the construction field, and is slow to alteration the conventional way to combine environmental issue as part of the decision process. With increased information and awareness about these influence, among these sustainable building construction and material issues. In this article was began with investigate these issues in the North Cyprus, a questionnaire survey was conducted to investigate the scale of awareness, learning and implementation of sustainability in practices between architect’s perception and how …

High Performance Mortar With 100% Recycled Aggregate Using Titanium Dioxide Nanoparticles, Molly Schrager, Vito Francioso, Arjun Kadakia, Mirian Velay-Lizancos

The Summer Undergraduate Research Fellowship (SURF) Symposium

Concrete and mortar are materials commonly used in construction. Their main compounds are cement, aggregates (sand and gravel) and water. In an effort to increase the sustainability of these materials, the idea of using recycled aggregates from ground old concrete and using it to make mortar and concrete has gained more interest. It has two advantages: it reduces the need to mine for raw materials and lessens the amount of old and defective concrete that is typically put in landfills. But, the use of recycled concrete aggregate lowers the strength of mortars and concretes because the residual compounds in the …