Architecture Commons^™

Arce 415 Portfolio: The Green Bird Of Paradise, Kristofer R. Rickansrud, Ryan Chan, Brendan Peers, Joel Santoyo

Architectural Engineering

A design project creating a Polyshell sunshade structure for the Leaning Pine Arboretum.

Cold-Formed Steel Strength Predictions For Combined Bending And Torsion, Yu Xia, Robert S. Glauz, Benjamin W. Schafer, Michael Seek, Hannah B. Blum

Engineering Technology Faculty Publications

Locally slender cross-section members, such as cold-formed steel Cee and Zee sections, are susceptible to significant twisting and high warping torsion stresses. Torsion considerations are complicated by whether it is derived as a first-order effect from loading or a second-order effect from instability. The current design for combined bending and torsion interaction has some limitations, including only considering the first yield in torsion and ignoring the cross-section slenderness in torsion. Previous work has derived a simple uniform equation to predict the bimoment capacity and two bimoment strength curves for local and distortional buckling under torsion only. This work is extended …

Design, Integration, And Evaluation Of Iot-Based Electrochromic Building Envelopes For Visual Comfort And Energy Efficiency, Qingqing Sun

All Dissertations

Electrochromic glazing has been identified as the next-generation high-performance glazing material for building envelopes due to its dynamic properties, which allow the buildings to respond to various climate conditions. IoT technologies have improved the sensing, communication, and interactions of building environmental data. Few studies have been done to synthesize the advancements in EC materials and building IoT technologies for better building performance. The challenge remains in the lack of compatible design and simulation tools, limited understanding of integration, and a paucity of evaluation measures to support the convergence between the EC building envelopes and IoT technologies. This research first explores …

Design Challenges Of Solving Circular Geometry In Residential Buildings, Rayan Zankar, Lana El-Kaaki, Jameel Fares

Architecture and Planning Journal (APJ)

A dimensional geometrical shape such as a circular shape has been established all throughout the history of building design planning in order to find out the suitable arrangements for the living spaces: One of the most unusual designs planning in architecture is circular planning. Moreover, residential buildings that contain a circular plan are not built that frequently as well, but they still are a part of architecture since prehistoric times. Unfortunately, there are significant issues in such buildings, such as a structural challenge within the design module with orientation problems. In other words, there is a missing of the optimum …

The Advantages Of Integrated Project Delivery (Ipd) Utilization In The Construction Industry Compared To Traditional Project Delivery Methods, Mert Oytun

English Language Institute

Today, primarily due to the development of information technologies, the Architecture Engineering and Construction (AEC) industry has the opportunity to realize its shortcomings more effortlessly. Typically, the most considerable difficulties are encountered in the performance measurements of projects in the AEC industry. The reason is that the AEC industry is highly fragmented, even though it involves various stakeholders that should be in uninterrupted communication throughout all phases of a project. This fragmented structure mainly causes (1)endless debates among the stakeholders, (2) schedule delays, and (3) profit losses. Hence, addressing projects’ productivity change regarding the utilization of different project delivery methods …

Ten Questions Concerning Well-Being In The Built Environment, Sergio Altomonte, Joseph Allen, Philomena M. Bluyssen, Gail Brager, Lisa Heschong, Angela Loder, Stefano Schiavon, Jennifer A. Veitch, Lily M. Wang, Pawel Wargocki

Durham School of Architectural Engineering and Construction: Faculty Publications

Well-being in the built environment is a topic that features frequently in building standards and certification schemes, in scholarly articles and in the general press. However, despite this surge in attention, there are still many questions on how to effectively design, measure, and nurture well-being in the built environment. Bringing together experts from academia and the building industry, this paper aims to demonstrate that the promotion of well-being requires a departure from conventional agendas. The ten questions and answers have been arranged to offer a range of perspectives on the principles and strategies that can better sustain the consideration of …

0823: Robert And Sidney Day Collection, 1894-2009, Marshall University Special Collections

Guides to Manuscript Collections

The collection consists of materials from Robert L. Day and Sidney L. Day’s education and professional lives as architects in Huntington, West Virginia in the early to mid-twentieth century, with the majority of the collection relating to their professional careers. Dates for the materials range from 1894 to 2009 with the bulk of materials created between 1910 and 1960. Multiple material formats are found within the collection. Formats include paper documents such as business correspondence and project estimates, industry tools and instruments, industry catalogs, clippings, and brochures, architectural blueprints, architectural renderings, and educational certificates, with blueprints and renderings consisting of …

Achieving Sustainability Through Reducing Construction Waste During The Design Process: A Value Management Perspective, Ayman Ahmed Ezzat Othman, Sherouk Mohamed Abdelrahim

Architectural Engineering

Purpose:

The purpose of this paper is to investigate the role of Value Management towards achieving sustainability through reducing the construction waste during the design process.

Design/methodology/approach

To achieve the abovementioned aim, a research methodology consisting literature review and survey questionnaire is designed to achieve the following objectives: first, building a comprehensive understanding of the research topic through reviewing literature related to the nature of the construction industry, waste in construction, sustainability, the design phase and Value Management; second, presenting and analysing two case studies to validate the role of Value Management towards reducing waste in construction projects; third, conducting …

Exposing Undergraduates To Design, Fabrication, And Large-Scale Experimentation In A Structural Steel Design Course, Jenna Williams, Mark William Wright, Michael James Deigert, Anahid A. Behrouzi

Architectural Engineering

During Fall 2017, Spring and Fall 2018 quarters, various hands-on design, fabrication, and large-scale experimental projects were incorporated into a 10-week undergraduate structural steel design course offered in the Department of Architectural Engineering at California Polytechnic State University – San Luis Obispo. Through these projects students investigated one or two unique steel lateral force resisting systems (LFRS) consisting of either: special moment frame (SMF), special concentric braced frame (SCBF), and/or buckling restrained braced frame (BRBF). Students completed design calculations per the American Institute of Steel Construction steel building and seismic codes, visualized their final design using AutoCAD software, constructed and …

The Hutongs Blooming 08, L Khawn Din

Senior Honors Projects, 2010-2019

China’s rapid development has altered the city’s landscape on a massive scale, continually eroding the delicate urban tissue of old Beijing. Such dramatic changes have forced an aging architecture to rely on chaotic, spontaneous renovations to survive the ever-changing neighborhood. In addition, poor standards of hygiene have turned unique living space and potential thriving communities into a serious urban problem. Hutongs are gradually becoming the local inhabitants’ dumpster and the haven for the wealthy. The hutongs blooming 08, will be inserted into the urban fabric, structure like clouds, attracting new people, activities, and resources to reactivate entire neighborhoods. They exist …

Buildings As An Assembly Of 3d Printed Components, Stephen S. Lauer

ASA Multidisciplinary Research Symposium

This project aimed to design a series of components that would be assembled to become a house. The design is a house that is printed in a series of modules and assembled using a series of printed connectors for not only attaching the modules but also used in other various details.

Umass Amherst Green Building Guidelines V.2 And Leedv4, Kylie A. Landrey, Ted Mendoza, Ludmilla Pavlova-Gillham, Mohamad Farzinmoghadam, Somayeh Tabatabaee, Nariman Mostafavi, Ray Kinoshita Mann, Jeffrey Dalzell, Ajla Aksamija

Campus Planning Reports and Plans

Facilities & Campus Services supports sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers, contractors and other consultants working with the University. The UMass Amherst Green Building Guidelines v2 and LEED v4 provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED v4 certification by focusing the conversation on those green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Ludmilla D Pavlova

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Physical Models In The Reinforced Concrete Design Classroom, Anahid A. Behrouzi

Architectural Engineering

An overview is presented of various physical demonstration tools intended to supplement lectures in topic areas that students consistently identify as being troublesome. The article describes the design, fabrication, and implementation of classroom models to help explain flexural behavior and detailing of beams, slabs, and frame systems.

Aspen Art Museum, Rumiko Handa

Architecture Program: Faculty Scholarly and Creative Activity

'I hope when people come to the New Aspen Art Museum they will sense that this building is very much at home in Aspen and could only live here', Shigeru Ban states in a short essay to visitors included in the museum brochure. Indeed, the way in which Ban's design fits uniquely within its context is nothing less than extraordinary. A full appreciation of his accomplishment, however, requires a study of Aspen's history.

What strategies are available to the architect who intends to design a museum that fits well for a community with keen interests in arts but lacking in …

Syllabus: Solar Energy Systems And Building Design, Ho-Sung Kim

Sustainability Education Resources

This course introduces the fundamental concepts of solar building design and energy systems. Through project based study and possible field visits, students will explore the theory, technologies, applications, and benefits of solar design of buildings and discover how to utilize solar energy systems for residential and commercial buildings. Students will be required to research and document technology and complete a semester case study project in which they will examine various energy conservation aspects and economics underlying solar energy systems.

Spans Across Time: Compliance Of Historic Maine Coastal Bridges With Modern Geometric Design Standards, Elizabeth Reynolds

Honors College

The purpose of this thesis is to study a wide range of historic bridges along the coast of Maine. Three bridges were selected for study: Sewall’s Bridge, Bailey Island Bridge, and Deer Isle-Sedgwick Bridge. The selected bridges exhibit varying historic treatment approaches, material use, structure type, and span length. This thesis establishes the compliance of these bridges with modern geometric standards, as defined by AASHTO (2011), including maximum grade, vertical and horizontal alignment, roadway width, and sidewalk width. Passing sight distance, passenger comfort and general appearance are not be included in this evaluation of geometric design.

This document outlines the …

Cal Poly 2013 Brocade Challenge Project Report: Efficient Data Center Design, Kevin Miller

Architectural Engineering

No abstract provided.

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Interactive Music Experience, Gaetan Jacques

Masters Theses 1911 - February 2014

In February of 2012, alternative rock band OK Go released a music video for their song “Needing/Getting”. The video explores a creative way of playing music, by driving a car through a constructed, choreographed environment. A driving track was set up as a large musical instrument which was “played” by a car. Architects, musicians, and artist are looking for innovative ways to develop active relationships between people, music, and architecture. The traditional passive relationship of these three is static, a design that does not promote interaction or participation. If we consider, behind a performance, there is a great deal of …

The Latest Homebond House Building Manual : A Critique, Joseph Little

Articles

The Homebond House Building Manual had the distinction of being called the ‘bible’ for many building during the boom. It was a commonly‐used reference book, even for many builders and architects who never built housing estates and therefore had little need of a Homebond guarantee. One might design a construction detail of a dwelling differently, but one did it with an awareness of what the manual showed. It gave the insurance scheme great credibility and standing. This architect remembers reluctantly getting involved with an external wall insulation self‐build project in rural Ireland in 2006 (far beyond his normal travel distance) …

Variability Analysis Of Undrained Shear Strength For Reliability-Based Design, Site Onyejekwe, Xin Kang, Louis Ge, Richard Wesley Stephenson

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Description of the Spatial Variation of Compositional and Mechanical Soil Parameters is Often Paramount in Site Characterization of Geotechnical Design and Analysis. the Values of the Parameters Themselves Largely Depend on In-Situ State Factors Which Are Related to Spatial Locations. Also, for Large-Scale Engineering Projects Such as Earth Dams or Highways, It is Generally Expected that Heterogeneous Site Characteristics Will Be Revealed by Investigations at Spatially Distant Locations. Currently, Most Reliability-Based Design Methods Are based on the Second-Moment Statistics (Mean and Variance). However, They Are Unable to Adequately Describe the Spatial Variation of Soil Properties. in This Paper, Spatial Correlation …

Thermal Bridging - Understanding Its Critical Role In Energy Efficiency, Joseph Little, Beñat Arregi

Articles

Plane element heat loss[1] and thermal bridging[2] together constitute all the conduction heat loss (measured in W/K, watts per kelvin) through the thermal envelope[3] of a building. Perversely insulating the plane elements more and more without carefully dealing with junctions can lead to a significant increase in thermal bridging heat loss. This is often more significant in poorly thought-out energy-focused retrofits than in existing or new buildings.

Top Tips For Domestic Refurbishment, Joseph Little

Articles

1) It stands to reason that insulating a wall should not affect its strength or longevity, nor should it result in a buildup of moisture (inter-stitial condensation) or mould. However the Industry is currently gripped with a desire to insulate to the highest standard (U-value) at the lowest financial cost, as quickly as possible, with little thought of these issues. An appropriate, robust solution must take the original wall, the occupant’s health, the room’s function and even the building’s location into account.

Breaking The Mould 5 : Comparative Simulation Of Internal Insulation Systems, Joseph Little

Articles

In the last edition of Construct Ireland ‘Breaking the Mould IV’ established the standard that should be used to evaluate thermal upgrades of single leaf walls, described steps to physically prepare the wall, explained some of the mechanisms that affect the likelihood of mould and gave criteria for judging the simulations outputs. The next step is to simulate a number of permutations of typical internal insulation systems using WUFI Pro under IS EN 15026.

Breaking The Mould 4 : Condensation Risk Analysis – The Standards And The Issues, Joseph Little

Articles

The ‘Breaking the Mould’ series of articles was written to explore the range of issues associated with upgrading single leaf walls with a focus on occupant and building health as much as energy, just as the Home Energy Saving Scheme was launched. A year on from the first article the need for greater understanding and clear guidance for the Industry is greater than ever. This is because the Government’s ‘Energy Demand Reduction Target’ (EDRT), under the 2006 EU ‘Energy Services Directive’, is bringing energy utilities (e.g. ESB, Bord Gáis) into the refurbishment market.

Breaking The Mould 3, Joseph Little

Articles

This article is the third in a series looking at thermal upgrades to single-leaf walls of existing houses. The theme for this article was intended to be an analysis of various drylining options for brick and rubble-built walls of older properties. That will follow. The following events forced a change in focus.

Breaking The Mould 2 : An Analysis Of Single-Leaf Insulation Upgrades, Joseph Little

Articles

This article is the second in a series looking at thermal upgrades to single-leaf walls of existing houses. It compares a range of ways of upgrading masonry single-leaf walls, particularly the ubiquitous hollow block wall, and the impact of those decisions on moisture content, wind- and airtightness, cost and heating. Future articles will look at various drylining approaches for a range of walls including brick walls of various widths.

Breaking The Mould 1 : A Study Of Condensation In Single-Leaf Concrete Wall Upgrades, Joseph Little

Articles

This article is the first of a series looking at upgrade options and issues associated with single-leaf walls of existing houses. This article will focus on insulated drylined concrete block walls of the ubiquitous housing estate house. This will include the findings of software that dynamically models moisture movement through the wall over several years. The article following this will look at a range of options for replacing existing drylining or installing drylining where it never was before, be that for a solid block wall of a 1950s house or a solid brick wall of an 1850s house.