Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 20 of 20
Full-Text Articles in Entire DC Network
Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis
Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis
Faculty of Engineering and Information Sciences - Papers: Part A
In this paper a novel microencapsulated phase change material (MF-3) has been developed and tested for solar assisted hot water storage systems. Even though the morphology of the sample was affected by the type of emulsifier used for fabrication it recorded the highest energy storage capacity of 126 kJ/kg with encapsulation efficiency of 97.4% as compared with other developed samples. For the purpose of assessing its thermal effectiveness it was theoretically evaluated in a compacted fixed bed TES unit and found to be capable of achieving a higher energy storage density as well as relatively smaller physical storage size than …
Nano-Enhanced Phase Change Materials For Improved Building Performance, Zhenjun Ma, Wenye Lin, Mohammed I. Sohel
Nano-Enhanced Phase Change Materials For Improved Building Performance, Zhenjun Ma, Wenye Lin, Mohammed I. Sohel
Faculty of Engineering and Information Sciences - Papers: Part A
Nano-enhanced phase change materials (PCMs) have attracted increasing attention to address one of the key barriers (i.e. low thermal conductivity) to the wide adoption of PCMs in many industrial applications. This paper discusses the generic problem and key issues associated with appropriately using this new class of materials in buildings for effective thermal management and improved energy performance. An overview on major recent development and application of nano-enhanced PCMs as thermal energy storage media is provided. A case study based on a PCM ceiling ventilation system integrated with solar photovoltaic thermal (PVT) collectors is then performed to evaluate the potential …
Predictive Inference For Big, Spatial, Non-Gaussian Data: Modis Cloud Data And Its Change-Of-Support, Aritra Sengupta, Noel A. Cressie, Brian H. Kahn, Richard Frey
Predictive Inference For Big, Spatial, Non-Gaussian Data: Modis Cloud Data And Its Change-Of-Support, Aritra Sengupta, Noel A. Cressie, Brian H. Kahn, Richard Frey
Faculty of Engineering and Information Sciences - Papers: Part A
Remote sensing of the earth with satellites yields datasets that can be massive in size, nonstationary in space, and non-Gaussian in distribution. To overcome computational challenges, we use the reduced-rank spatial random effects (SRE) model in a statistical analysis of cloud-mask data from NASA's Moderate Resolution Imaging Spectroradiometer (MODIS) instrument on board NASA's Terra satellite. Parameterisations of cloud processes are the biggest source of uncertainty and sensitivity in different climate models' future projections of Earth's climate. An accurate quantification of the spatial distribution of clouds, as well as a rigorously estimated pixel-scale clear-sky-probability process, is needed to establish reliable estimates …
The Social Phenomenon Of Body-Modifying In A World Of Technological Change: Past, Present, Future, Sharon Bradley-Munn, Katina Michael, M G. Michael
The Social Phenomenon Of Body-Modifying In A World Of Technological Change: Past, Present, Future, Sharon Bradley-Munn, Katina Michael, M G. Michael
Faculty of Engineering and Information Sciences - Papers: Part A
The current level of uncritical adoption in bodymodifying devices, and the propensity for remaking the human body through the aid of technology, is moving society closer to a human-machine fusion. We are at the brink of postmodernity in all its fullness. This paper speculates on the pros and cons of such a reality and insists on the right of the individual to be able to self-govern his/her own body, maintaining the right to choose. How individual choice is limited is also discussed, as industry innovation cycles get faster, and the need for continuous disruption means that the consumer is often …
Optimization Of A Ceiling Ventilation System With Integrated Photovoltaic Thermal Collectors And Phase Change Materials, Zhenjun Ma, Wenye Lin, Mohammed I. Sohel
Optimization Of A Ceiling Ventilation System With Integrated Photovoltaic Thermal Collectors And Phase Change Materials, Zhenjun Ma, Wenye Lin, Mohammed I. Sohel
Faculty of Engineering and Information Sciences - Papers: Part A
This paper presents the performance evaluation and design optimization of a ceiling ventilation system with integrated solar photovoltaic thermal (PVT) collectors and phase change materials (PCMs) by using a hybrid Particle Swarm Optimization and Hooke-Jeeves Pattern search (PSO-HJ) algorithm. In this novel ceiling ventilation system, the PVT collectors are used to generate electricity and provide the low-grade heating energy for buildings by using the winter daytime solar radiation, while the PCM is integrated into the building ceiling as part of the ceiling insulation and at the same time, as a centralized thermal energy storage unit to temporally store the low-grade …
Thermal Performance Evaluation And Optimal Design Of Buildings With Integrated Air-Based Photovoltaic Thermal Collectors And Phase Change Materials Using The Hooke-Jeeves Pattern Search Method, Wenye Lin, Zhenjun Ma, Paul Cooper
Thermal Performance Evaluation And Optimal Design Of Buildings With Integrated Air-Based Photovoltaic Thermal Collectors And Phase Change Materials Using The Hooke-Jeeves Pattern Search Method, Wenye Lin, Zhenjun Ma, Paul Cooper
Faculty of Engineering and Information Sciences - Papers: Part A
Over the last several decades, many low energy technologies have been developed and deployed to reduce building energy consumption. Among various solutions, solar photovoltaic thermal (PVT) collectors and phase change materials (PCMs) are among the most promising methods receiving increasing attention. This paper presents a thermal performance evaluation and optimal design of buildings integrated with air-based solar PVT collectors and PCMs embedded in the building envelope by using The Hooke-Jeeves pattern search method. The Hooke-Jeeves generalized pattern search is used to search for optimal solutions of the optimization problem. The variables optimized include the PVT air flow rate, additional wall …
Development Of A Novel Phase Change Material Emulsion For Cooling Systems, Jingjing Shao, Jo Darkwa, Georgios Kokogiannakis
Development Of A Novel Phase Change Material Emulsion For Cooling Systems, Jingjing Shao, Jo Darkwa, Georgios Kokogiannakis
Faculty of Engineering and Information Sciences - Papers: Part A
In this paper, a novel phase change material emulsion (PCE-10) consisting of an organic PCM (RT10) and water has been developed. Its thermophysical properties such as heat of fusion, viscosity and sub-cooling temperature have been established. The chemical stability during both storage and discharge periods have also been evaluated. The results indicate low sub-cooling temperature and relatively long period of stability without any sign of segregation but the viscosity was found to be much higher than that of water.Further improvement and experimental studies into its flow characteristics are therefore being encouraged.
Using Solar Photovoltaic Thermal Collectors In Phase Change Materials Enhanced Buildings For Thermal Performance Management, Zhenjun Ma, Wenye Lin, Mohammed I. Sohel
Using Solar Photovoltaic Thermal Collectors In Phase Change Materials Enhanced Buildings For Thermal Performance Management, Zhenjun Ma, Wenye Lin, Mohammed I. Sohel
Faculty of Engineering and Information Sciences - Papers: Part A
This paper presents the investigation of using air-based solar photovoltaic thermal (PVT) collectors in phase change materials (PCMs) enhanced buildings for effective thermal management. PVT collectors are used to generate electricity and provide low grade heating energy to buildings for winter space heating. PCMs are either integrated into building walls to increase the local thermal mass or used as a temporary centralized thermal storage to store the low grade thermal energy derived from the PVT collectors. The thermal performance of buildings due to the integration of the PVT collectors and PCMs is tested and evaluated through computer simulations. It is …
Review Of Solid-Liquid Phase Change Materials And Their Encapsulation Technologies, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis
Review Of Solid-Liquid Phase Change Materials And Their Encapsulation Technologies, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis
Faculty of Engineering and Information Sciences - Papers: Part A
Various types of solid-liquid phase change materials (PCMs) have been reviewed for thermal energy storage applications. The review has shown that organic solid-liquid PCMs have much more advantages and capabilities than inorganic PCMs but do possess low thermal conductivity and density as well as being flammable. Inorganic PCMs possess higher heat storage capacities and conductivities, cheaper and readily available as well as being non-flammable, but do experience supercooling and phase segregation problems during phase change process. The review has also shown that eutectic PCMs have unique advantage since their melting points can be adjusted. In addition, they have relatively high …
Development Of High Melting Temperature Microencapsulated Phase Change Material For Compacted Thermal Energy Storage Bed, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis
Development Of High Melting Temperature Microencapsulated Phase Change Material For Compacted Thermal Energy Storage Bed, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis
Faculty of Engineering and Information Sciences - Papers: Part A
In this paper a novel high temperature microencapsulated phase change material (MEPCM) based on paraffin as the core material and MF resin as the shell material has been developed with the in-situ polymerization method for solar hot water storage application. The results showed that the type of emulsifier could influence core material content, the encapsulation efficiency as well as the latent heat capacity. Based on the results and analysis the study has shown that energy storage density could be increased by as much as 59% if 60wt% of MEPCM 1 was to be used in the proposed compacted MEPCM-water bed …
Climate Change Mitigation With Integration Of Renewable Energy Resources In The Electricity Grid Of New South Wales, Australia, Md Abu Abdullah, Ashish Agalgaonkar, Kashem M. Muttaqi
Climate Change Mitigation With Integration Of Renewable Energy Resources In The Electricity Grid Of New South Wales, Australia, Md Abu Abdullah, Ashish Agalgaonkar, Kashem M. Muttaqi
Faculty of Engineering and Information Sciences - Papers: Part A
The implementation of climate change mitigation strategies may significantly affect the current practices for electricity network operation. Increasing penetration of renewable energy generation technologies into electricity networks is one of the key mitigation strategies to achieve greenhouse gas emission reduction targets. Additional climate change mitigation strategies can also contribute to emission reduction thereby supplementing the renewable energy generation participation, which may be limited due to technical constraints of the network. In this paper, the penetration requirements for different renewable energy generation resources are assessed while concurrently examining other mitigation strategies to reduce overall emissions from electricity networks and meet requisite …
A Theoretical Investigation Of A Solar Photovoltaic Thermal System Integrated With Phase Change Materials, M Imroz Sohel, Zhenjun Ma, Paul Cooper, Jamie Adams, Robert Scott
A Theoretical Investigation Of A Solar Photovoltaic Thermal System Integrated With Phase Change Materials, M Imroz Sohel, Zhenjun Ma, Paul Cooper, Jamie Adams, Robert Scott
Faculty of Engineering and Information Sciences - Papers: Part A
In this paper we present a theoretical investigation of an air based solar photovoltaic thermal (PVT) system integrated with phase change materials. The advantage of the air based PVT system is that the air can be directly used for space heating or cooling. At first we present an air based PVT system model and analyze the effect of major parameters on the system performance. We then integrate this PVT system model with a phase change material (PCM) energy storage system model and analyze the system performance. We found that solar irradiation increased thermal efficiency initially before reaching a plateau. However, …
Change In Anxiety Following Successful And Unsuccessful Attempts At Smoking Cessation: Cohort Study, Mairtin S. Mcdermott, Theresa M. Marteau, Gareth J. Hollands, Matthew Hankins, Paul Aveyard
Change In Anxiety Following Successful And Unsuccessful Attempts At Smoking Cessation: Cohort Study, Mairtin S. Mcdermott, Theresa M. Marteau, Gareth J. Hollands, Matthew Hankins, Paul Aveyard
Faculty of Engineering and Information Sciences - Papers: Part A
Background Despite a lack of empirical evidence, many smokers and health professionals believe that tobacco smoking reduces anxiety, which may deter smoking cessation. Aims The study aim was to assess whether successful smoking cessation or relapse to smoking after a quit attempt are associated with changes in anxiety. Method A total of 491 smokers attending National Health Service smoking cessation clinics in England were followed up 6 months after enrolment in a trial of pharmacogenetic tailoring of nicotine replacement therapy (ISRCTN14352545). Results There was a points difference of 11.8 (95% CI 7.7-16.0) in anxiety score 6 months after cessation between …
Dynamic Change Impact Analysis For Maintaining And Evolving Agent Systems, Hoa Khanh Dam, Aditya Ghose
Dynamic Change Impact Analysis For Maintaining And Evolving Agent Systems, Hoa Khanh Dam, Aditya Ghose
Faculty of Engineering and Information Sciences - Papers: Part A
In contrast to an increasing number of agent-based applica- tions in various domains, there has been very little work on maintenance and evolution of agent systems. This paper ad- dresses this gap with a focus on change impact analysis, i.e. estimating the potential eects of changes before they are made as an agent system evolves. We propose a technique for performing impact analysis in an agent system using dy- namic information about agent behaviour. Our approach builds a representation of an agent's behaviour by analyzing its execution traces which consist of goals and plans, and uses this representation to estimate …
Thermal, Microstructural And Mechanical Coupling Analysis Model For Flatness Change Prediction During Run-Out Table Cooling In Hot Strip Rolling, Xiao-Dong Wang, Fei Li, Zheng-Yi Jiang
Thermal, Microstructural And Mechanical Coupling Analysis Model For Flatness Change Prediction During Run-Out Table Cooling In Hot Strip Rolling, Xiao-Dong Wang, Fei Li, Zheng-Yi Jiang
Faculty of Engineering and Information Sciences - Papers: Part A
Non-uniformity of temperature distribution across strip width direction is the ultimate reason why the flatness defect occurs on the strip after cooling process although the strip is flat at the exit of finishing mill. One thermal, microstructural and mechanical coupling analysis model for predicting flatness change of steel strip during the run-out table cooling process was established using ABAQUS finite element software. K Esaka phase transformation kinetics model was employed to calculate the phase transformation, and coupled with temperature calculation using the user subroutine program HETVAL. Elasto-plasticity constitutive equations of steel material, in which conventional elastic and plastic strains, thermal …
Development And Validation Of A Concept Inventory For Introductory-Level Climate Change Science, Lorna Jarrett, Brian Ferry, George Takacs
Development And Validation Of A Concept Inventory For Introductory-Level Climate Change Science, Lorna Jarrett, Brian Ferry, George Takacs
Faculty of Engineering and Information Sciences - Papers: Part A
This paper follows on from Jarrett, Takacs and Ferry (2011) which reported the first stage in development of a high school level concept inventory (CI) for the science of climate change: the climate change concept inventory (CCCI). In order to develop a reliable and valid instrument, it is necessary to follow appropriate procedures. This paper details the process of CI item development; reports statistical results of initial field trials and outlines how these will be used to further refine the CCCI. Item difficulty, discrimination, and point biserial coefficient were calculated for each item. Cronbach's alpha and test-retest data were used …
Cost-Based Bdi Plan Selection For Change Propagation, Khanh Hoa Dam, Michael Winikoff
Cost-Based Bdi Plan Selection For Change Propagation, Khanh Hoa Dam, Michael Winikoff
Faculty of Engineering and Information Sciences - Papers: Part A
Software maintenance is responsible for as much as two thirds of the cost of any software, and is consequently an important research area. In this paper we focus on the change propagation problem: given a primary change that is made in order to meet a new or changed requirement, what additional, secondary, changes are needed? We build on previous work that has proposed to use a BDI (belief-desire-intention) agent framework to propagate changes by fixing violations of consistency constraints. One question that needs to be answered as part of this framework is how to select between different applicable (repair) plan …
An Agent-Oriented Approach To Support Change Propagation In Software Evolution, Hoa K. Dam
An Agent-Oriented Approach To Support Change Propagation In Software Evolution, Hoa K. Dam
Faculty of Engineering and Information Sciences - Papers: Part A
Software maintenance and evolution is arguably a lengthy and expensive phase in the life cycle of a software system. A critical issue at this phase is change propagation: given a set of primary changes that have been made to software, what additional secondary changes are needed? Although many approaches have been proposed, automated change propagation is still a significant technical challenge in software maintenance and evolution. This paper presents a Ph.D. research in the final stages of developing and evaluating a novel, agent-based, framework to support semi-automated change propagation in evolving software systems.
An Agent-Oriented Approach To Change Propagation In Software Evolution, Khanh Hoa Dam, Michael Winikoff, Lin Padgham
An Agent-Oriented Approach To Change Propagation In Software Evolution, Khanh Hoa Dam, Michael Winikoff, Lin Padgham
Faculty of Engineering and Information Sciences - Papers: Part A
Software maintenance and evolution are inevitable activities since almost all software that is useful and successful stimulates user-generated requests for change and improvements. One of the most critical problems in software maintenance and evolution is to maintain consistency between software artefacts by propagating changes correctly. Although many approaches have been proposed, automated change propagation is still a significant technical challenge in software engineering. In this paper we present a novel, agent-oriented approach to deal with change propagation in evolving software systems that are developed using the Prometheus methodology. A metamodel with a set of the Object Constraint Language (OCL) rules …
The Impact Of Ios-Enabled Business Process Change On Business Outcomes: Transformation Of The Value Chain Of Japan Airlines, Akemi Chatfield, Niels Bjorn-Andersen
The Impact Of Ios-Enabled Business Process Change On Business Outcomes: Transformation Of The Value Chain Of Japan Airlines, Akemi Chatfield, Niels Bjorn-Andersen
Faculty of Engineering and Information Sciences - Papers: Part A
We present a framework for evaluating the impact of IT-enabled radical process change on business outcomes at Japan Airlines. The framework presents a systemic view of factors that are shown to impact the firm's business outcomes. The framework identifies salient global environmental factors and business challenges the firm faces, strategic responses it makes, and management methodologies and strategic IT systems adopted to enable the firm's changes in business processes. We then discuss the radical transformation of the traditional keiretsu-based value chain at Japan Airlines, the world's third largest airline company. We apply the framework to evaluate the impact of the …