Digital Commons Network^™

Spatiotemporal Variability In Total Dissolved Solids And Total Suspended Solids Along The Colorado River, Godson Ebenezer Adjovu, Haroon Stephen, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

The Colorado River is a principal source of water for 40 million people and farmlands in seven states in the western US and the Republic of Mexico. The river has been under intense pressure from the effects of climate change and anthropogenic activities associated with population growth leading to elevated total dissolved solid (TDS) and total suspended solid (TSS) concentrations. Elevated TDS- and TSS-related issues in the basin have a direct negative impact on the water usage and the ecological health of aquatic organisms. This study, therefore, analyzed the spatiotemporal variability in the TDS and TSS concentrations along the river. …

Evaluating The Potential Of Geopolymer Concrete As A Sustainable Alternative For Thin White-Topping Pavement, Sathvik S. Chandra, Pshtiwan Shakor, Sarwar Mohmmad, Bankole O. Awuzie, Atul K. Singh, Abishek Rauniyar, M Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Introduction:

The construction industry uses a large quantity of natural materials in the production of concrete. Although attempts to incorporate green materials in concrete began years ago, not every building uses such materials today, and roadways, particularly, still rely on unsustainable materials.

Methods:

Therefore, this study used alternative materials, including fly ash, manufactured sand aggregates, and different molarities of alkaline activators, to incorporate waste byproducts in a geopolymer concrete white-topping pavement layer. Recent developments have led to the emergence of geopolymers as distinct classes of materials. In the 1990s, fly ash-based geopolymers became more popular than other kinds, as they …

Overview Of The Application Of Remote Sensing In Effective Monitoring Of Water Quality Parameters, Godson Ebenezer Adjovu, Haroon Stephen, David James, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

This study provides an overview of the techniques, shortcomings, and strengths of remote sensing (RS) applications in the effective retrieval and monitoring of water quality parameters (WQPs) such as chlorophyll-a concentration, turbidity, total suspended solids, colored dissolved organic matter, total dissolved solids among others. To be effectively retrieved by RS, these WQPs are categorized as optically active or inactive based on their influence on the optical characteristics measured by RS sensors. RS applications offer the opportunity for decisionmakers to quantify and monitor WQPs on a spatiotemporal scale effectively. The use of RS for water quality monitoring has been explored in …

Cutting-Edge Technologies To Achieve A Higher Level Of Modular Construction – Literature Review, Seungtaek Lee, Jin Ouk Choi, Seung Song

Civil and Environmental Engineering and Construction Faculty Research

Cost overruns, schedule delays, and a shortage of skilled labor are common problems the construction industry is currently experiencing. Modularization and standardization strategies have the potential to resolve the various problems mentioned above and have been applied for various construction applications for a long time. However, the level of modularization remains low, and modular construction projects have not been getting the full benefits. Thus, this review investigated the cutting-edge technologies currently being utilized to develop the modular construction field. For this paper, qualified research papers were identified using predetermined keywords from previous related research papers. Identified literature was then filtered …

Applications Of Agent-Based Modeling (Abm) In Enhancing Facility Operation And Management, Ali Khodabandelu, Jee Woong Park

Civil and Environmental Engineering and Construction Faculty Research

Agent-based modeling (ABM), as a relatively new simulation technique, has recently gained in popularity in the civil engineering domain due to its uniquely advantageous features. Among many civil engineering applications, ABM has been applied to facility operation and management, such as energy consumption management, as well as the enhancement of maintenance and repair processes. The former studies used ABM to manage energy consumption through simulating human energy-related behaviors and their interactions with facilities, as well as electrical, heating, and cooling systems and appliances, while the latter used ABM to enhance maintenance process through facilitating coordination, negotiation, and decision making between …

An Agent-Based Framework For Investigating Safety-Productivity Tradeoff Of Construction Laborers Considering Risk-Taking Behavioral Heterogeneity, Ali Khodabandelu, Jee Woong Park, Seyedmohsen Kheyrandish

Civil and Environmental Engineering and Construction Faculty Research

Construction laborers and crews play a critical role in achieving a safe and productive construction site. Many past research studies used top-down approaches/perspectives for studying the impact of laborers' performance on overall construction site outputs with limited flexibility in accounting for laborers' various characteristics. However, the recent reap in computational advances allowed applications of bottom-up architectures, which can potentially incorporate heterogeneous characteristics of laborers' individual behavioral and decision-making features effectively. Accordingly, agent-based modeling (ABM), as a tool to leverage a bottom-up methodological approach, has been widely adopted by recent research. Existing literature investigated the influence of changes in laborers' behaviors …

Steel Module-To-Concrete Core Connection Methods In High Rise Modular Buildings: A Critical Review, Bishal Poudel, Seungtaek Lee, Jin Ouk Choi

Civil and Environmental Engineering and Construction Faculty Research

Modularization in a high-rise building is different from a small building, as it is exposed to more lateral forces like wind and earthquakes. The integrity, robustness, and overall stability of the modules and their performance is based on the joining techniques and strong structural systems. High lateral stiff construction structures like concrete shear walls and frames, braced steel frames, and steel moment frames are used for the stability of high-rise modular buildings. Similarly, high-rise stick-built buildings have concrete cores and perimeter frames for lateral load strength and stiffness. Methods for general steel-concrete connections are available in many works of literature. …

The Current State And Future Directions Of Industrial Robotic Arms In Modular Construction, Seung Ho Song, Jin Ouk Choi, Seungtaek Lee

Civil and Environmental Engineering and Construction Faculty Research

Industrial robotic arms are widely adopted in numerous industries for manufacturing automation under factory settings, which eliminates the limitations of manual labor and provides significant productivity and quality benefits. The U.S. modular construction industry, despite having similar controlled factory environments, still heavily relies on manual labor. Thus, this study investigates the U.S., Canada, and Europe-based leading modular construction companies and research labs implementing industrial robotic arms for manufacturing automation. The investigation mainly considered the current research scope, industry state, and constraints, as well as identifying the types and specifications of the robotic arms in use. First, the study investigated well-recognized …

Lessons Learned During The Early Phases Of A Modular Project: A Case Study Of Unlv's Solar Decathlon 2020 Project, Jin Ouk Choi, Seungtaek Lee, Eric Weber

Civil and Environmental Engineering and Construction Faculty Research

The U.S. Department of Energy conducts the Solar Decathlon competition as a student-based achievement that encourages sustainable design with energy efficiency and solar energy technologies. In the 2020 competition, the University of Nevada, Las Vegas (UNLV) team designed, fabricated, and constructed a net-zero modular house that applies innovative and highly efficient building technologies. This paper focused on the lessons learned during the early phases of this ongoing modular project. The research methodology included obtaining feedback from key project participants using a well-structured questionnaire. The results showed that the major items/challenges in the project’s planning phase included selecting the modular size, …

Analysis Of A Long Volumetric Module Lift Using Single And Multiple Cranes, Ali Khodabandelu, Jee Woong Park, Jin Ouk Choi, Mahsa Sanei

Civil and Environmental Engineering and Construction Faculty Research

Industrialized and modular construction is a growing construction technique that can transfer a large portion of the construction process to off-site fabrication yards. This method of construction often involves the fabrication, pre-assembly, and transportation of massive and long volumetric modules. The module weight keeps increasing as the modules become more complete (with infill) to minimize the work at the site and, as higher productivity can be achieved at the fabrication shop. Thus, a volumetric module delivery gets more challenging and risky. Despite its importance, past research paid relatively insufficient attention to the problem related to the lifting of heavy modules. …

Long-Term Wildfire Reconstruction: In Need Of Focused And Dedicated Pre-Planning Efforts, William S. Harris, Jin Ouk Choi, Jaewon Lim, Yong-Cheol Lee

Civil and Environmental Engineering and Construction Faculty Research

Wildfire disasters in the United States impact lives and livelihoods by destroying private homes, businesses, community facilities, and infrastructure. Disaster victims suffer from damaged houses, inadequate shelters, inoperable civil infrastructure, and homelessness coupled with longterm recovery and reconstruction processes. Cities and their neighboring communities require an enormous commitment for a full recovery for as long as disaster recovery processes last. State, county, and municipal governments inherently have the responsibility to establish and provide governance and public services for the benefit and well being of community members. Municipal governments’ comprehensive and emergency response plans are the artifacts of planning efforts that …

Evaluating The Behaviour Of Centrally Perforated Unreinforced Masonry Walls: Applications Of Numerical Analysis, Machine Learning, And Stochastic Methods, Mohsen Khaleghi, Javid Salimi, Visar Farhangi, Mohammad Javad Moradi, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

The presence of openings greatly affects the response of unreinforced masonry (URM) walls. This topic greatly attracts the attention of many researchers. Perforated unreinforced masonry (PURM) walls under in-plane loads through the truss discretization method (TDM) along with several machine learning approaches such as Multilayer perceptron (MLP), Group of Method Data Handling (GMDH), and Radial basis function (RBF) are described in this paper. A new method named Multi-pier (MP) that is fast and accurate, is used to determine the behavior of PURM walls. The results of the MP method are expressed as a ratio of lateral load-bearing capacity and initial …

Flow Characteristics Through Granular Soil Influenced By Saline Water Intrusion: A Laboratory Investigation, Sudip Basack, Ghritartha Goswami, Hadi Khabbaz, M Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

The coastal geoenvironment initiates saline water intrusion into the freshwater aquifers, producing a geohydraulic problem. Such intrusion not only contaminates the fresh groundwater resources, making them unsuitable for human use, but also alters the hydraulic conductivity of the aquifer materials, which affects the coastal groundwater flow, influencing the water resources planning and management. Past investigations reveal that the groundwater flow can be linear or nonlinear depending upon the hydraulic gradient. Thus, the coefficients of nonlinear hydraulic conductivities are affected by saltwater intrusion. The present study focuses on an in-depth laboratory investigation into the influence of saltwater submergence on the nonlinear …

Influence Of Saltwater Submergence On Geohydraulic Properties Of Sand: A Laboratory Investigation, Sudip Basack, Ghritartha Goswami, Sumanpran Sonowal, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Saline water intrusion into freshwater aquifers is a major geohydraulic problem relevant to coastal environment. Apart from contaminating the fresh groundwater resources, the saltwater intrusion alters the geotechnical properties of the aquifer materials, affecting the coastal water resource planning and management. The present study focuses on an in-depth laboratory investigation of the influence of saltwater submergence on the geohydraulic properties of sand. The fine sand sample was submerged under saline water of specified concentrations for specific periods, and the alteration in their engineering properties has been studied. It is observed that the specific gravity, dry density, and permeability of fine …

Characteristics Of Flow Over Rectangular Labyrinth Weirs With Round Corners, Omed S.Q. Yousif, Kawa Z. Abdulrahman, Wazira Qadir, Ahang S. Ali, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

The hydraulic performance of round-cornered rectangular labyrinth weirs with varying weir heights and effective lengths has not been explored in the existing literature to the authors’ knowledge. The purpose of this experimental study was to see how the height and effective length of round-cornered rectangular labyrinth weirs affect their discharge efficiency. Nine flat-crested rectangular labyrinth weirs made of high-density polyethylene (HDPE) were tested in a rectangular flume under various discharges to fulfill the goals of this study. The discharge coefficients for the weirs were then calculated. The hydraulic efficiency of weirs with round corners increases as the weir height (P) …

A Comparative Study On Soil Stabilization Relevant To Transport Infrastructure Using Bagasse Ash And Stone Dust And Cost Effectiveness, Sudip Basack, Ghritartha Goswami, Hadi Khabbaz, Moses Karakouzian, Parinita Baruah, Niky Kalita

Civil and Environmental Engineering and Construction Faculty Research

Soft ground improvement to provide stable foundations for infrastructure is national priority for most countries. Weak soil may initiate instability to foundations reducing their lifespan, which necessitates the adoption of a suitable soil stabilization method. Amongst various soil stabilization techniques, using appropriate admixtures is quite popular. The present study aims to investigate the suitability of bagasse ash and stone dust as the admixtures for stabilizing soft clay, in terms of compaction and penetration characteristics. The studies were conducted by means of a series of laboratory experimentations with standard Proctor compaction and CBR tests. From the test results it was observed …

Behaviour Investigation Of Sma-Equipped Bar Hysteretic Dampers Using Machine Learning Techniques, Visar Farhangi, Hashem Jahangir, Danial Rezazadeh Eidgahee, Arash Karimipour, Seyed Alireza Nedaei Javan, Hamed Hasani, Nazanin Fasihihour, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Most isolators have numerous displacements due to their low stiffness and damping properties. Accordingly, the supplementary damping systems have vital roles in damping enhancement and lower the isolation system displacement. Nevertheless, in many cases, even by utilising additional dampers in isolation systems, the occurrence of residual displacement is inevitable. To address this issue, in this study, a new smart type of bar hysteretic dampers equipped with shape memory alloy (SMA) bars with recentring features, as the supplementary damper, is introduced and investigated. In this regard, 630 numerical models of SMA-equipped bar hysteretic dampers (SMA-BHDs) were constructed based on experimental samples …

Microcystis Sp. Co-Producing Microcystin And Saxitoxin From Songkhla Lake Basin, Thailand, Ampapan Naknaen, Waraporn Ratsameepakai, Oramas Suttinun, Yaowapa Sukpondma, Eakalak Khan, Rattanaruji Pomwised

Civil and Environmental Engineering and Construction Faculty Research

The Songkhla Lake Basin (SLB) located in Southern Thailand, has been increasingly polluted by urban and industrial wastewater, while the lake water has been intensively used. Here, we aimed to investigate cyanobacteria and cyanotoxins in the SLB. Ten cyanobacteria isolates were identified as Microcystis genus based on16S rDNA analysis. All isolates harbored microcystin genes, while five of them carried saxitoxin genes. On day 15 of culturing, the specific growth rate and Chl-a content were 0.2–0.3 per day and 4 µg/mL. The total extracellular polymeric substances (EPS) content was 0.37–0.49 µg/mL. The concentration of soluble EPS (sEPS) was 2 times higher …

Trihalomethanes In Water Supply System And Water Distribution Networks, Sornsiri Sriboonnak, Phacharapol Induvesa, Suraphong Wattanachira, Pharkphum Rakruam, Adisak Siyasukh, Chayakorn Pumas, Aunnop Wongrueng, Eakalak Khan

Civil and Environmental Engineering and Construction Faculty Research

The formation of trihalomethanes (THMs) in natural and treated water from water supply systems is an urgent research area due to the carcinogenic risk they pose. Seasonal effects and pH have captured interest as potential factors affecting THM formation in the water supply and distribution systems. We investigated THM occurrence in the water supply chain, including raw and treated water from water treatment plants (coagulation, sedimentation, sand filtration, ClO2-disinfection processes, and distribution pipelines) in the Chiang Mai municipality, particularly the educational institute area. The effects of two seasons, rainy (September–November 2019) and dry (December 2019–February 2020), acted as surrogates for …

Construction Disputes And Associated Contractual Knowledge Discovery Using Unstructured Text-Heavy Data: Legal Cases In The United Kingdom, Jeehee Lee, Youngjib Ham, June-Seong Yi

Civil and Environmental Engineering and Construction Faculty Research

Construction disputes are one of the main challenges to successful construction projects. Most construction parties experience claims—and even worse, disputes—which are costly and time-consuming to resolve. Lessons learned from past failure cases can help reduce potential future risk factors that likely lead to disputes. In particular, case law, which has been accumulated from the past, is valuable information, providing useful insights to prepare for future disputes. However, few efforts have been made to discover legal knowledge using a large scale of case laws in the construction field. The aim of this paper is to enhance understanding of the multifaceted legal …

Impervious Surfaces Mapping At City Scale By Fusion Of Radar And Optical Data Through A Random Forest Classifier, Binita Shrestha, Haroon Stephen, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

Urbanization increases the amount of impervious surfaces, making accurate information on spatial and temporal expansion trends essential; the challenge is to develop a cost-and laboreffective technique that is compatible with the assessment of multiple geographical locations in developing countries. Several studies have identified the potential of remote sensing and multiple source information in impervious surface quantification. Therefore, this study aims to fuse datasets from the Sentinel 1 and 2 Satellites to map the impervious surfaces of nine Pakistani cities and estimate their growth rates from 2016 to 2020 utilizing the random forest algorithm. All bands in the optical and radar …

A Novel Analytical Method For Evaluating The Characteristics Of Hydraulic Jump At A Positive Step, Milad Mohammadi, Mohammad Nazari-Sharabian, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

We present a new method to evaluate the hydraulic jump characteristics in a horizontal rectangular channel with a positive step. We considered the flow curvature effect and the free surface’s small rise at the A-type hydraulic jump’s end. First, we present a novel method to give jump length estimation based on the similarity of the jump and the turbulent wall-jet, considering the pressure gradient. Then, considering the jump as a curvilinear flow and using a one-dimensional momentum equation, we present an accurate expression for the conjugate flow depth regarding the initial Froude number and step height. Finally, we compute the …

Evaluating Irrigation Performance And Water Productivity Using Eeflux Et And Ndvi, Usha Poudel, Haroon Stephen, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

Southern California’s Imperial Valley (IV) faces serious water management concerns due to its semi-arid environment, water-intensive crops and limited water supply. Accurate and reliable irrigation system performance and water productivity information is required in order to assess and improve the current water management strategies. This study evaluates the spatially distributed irrigation equity, adequacy and crop water productivity (CWP) for two water-intensive crops, alfalfa and sugar beet, using remotely sensed data and a geographical information system for the 2018/2019 crop growing season. The actual crop evapotranspiration (ETa) was mapped in Google Earth Engine Evapotranspiration Flux, using the linear interpolation method in …

Evaluation Of Fluoride Adsorption Mechanism And Capacity Of Different Types Of Bone Char, Benyapa Sawangjang, Phacharapol Induvesa, Aunnop Wongrueng, Chayakorn Pumas, Suraphong Wattanachira, Pharkphum Rakruam, Patiparn Punyapalakul, Satoshi Takizawa, Eakalak Khan

Civil and Environmental Engineering and Construction Faculty Research

The fluoride adsorption capacity of three types of bone char (BC), including cow BC (CBC), chicken BC (CKBC), and pig BC (PBC), was examined. At the optimum charring conditions (temperature and time), PBC had the highest hydroxyapatite (HAP) content (0.928 g-HAP/g-BC), while CBC had the highest specific surface area (103.11 m2/g-BC). CBC also had the maximum fluoride adsorption capacity (0.788 mg-F/g-HAP), suggesting that fluoride adsorption capacity depends more on the specific surface area of the BC than the HAP content. The adsorption data of CBC, CKBC, and PBC fit well with the pseudo-second-order model and the Langmuir isotherm. The maximum …

Cumulative Infiltration And Infiltration Rate Prediction Using Optimized Deep Learning Algorithms: A Study In Western Iran, Mahdi Panahi, Khabat Khosravi, Sajjad Ahmad, Somayeh Panahi, Salim Heddam, Assefa M. Melesse, Ebrahim Omidvar, Chang Wook Lee

Civil and Environmental Engineering and Construction Faculty Research

Study region: Sixteen different sites from two provinces (Lorestan and Illam) in the western part of Iran were considered for the field data measurement of cumulative infiltration, infiltration rate, and other effective variables that affect infiltration process. Study focus: Soil infiltration is recognized as a fundamental process of the hydrologic cycle affecting surface runoff, soil erosion, and groundwater recharge. Hence, accurate prediction of the infiltration process is one of the most important tasks in hydrological science. As direct measurement is difficult and costly, and empirical models are inaccurate, the current study proposed a standalone, and optimized deep learning algorithm of …

Real-Time Pm10 Emission Rates From Paved Roads By Measurement Of Concentrations In The Vehicle's Wake Using On-Board Sensors Part 2. Comparison Of Scamper, Traker™, Flux Measurements, And Ap-42 Silt Sampling Under Controlled Conditions, Dennis R. Fitz, Kurt Bullimer, Vic Etyemezian, Hampden D. Kuhns, John A. Gillies, George Nikolich, David E. James, Rodney Langston, Russell S. Merle Jr.

Civil and Environmental Engineering and Construction Faculty Research

Representative soil was evenly applied to an 800-m section of road surface. The test area was of sufficient length to allow for measurement at constant speeds of up to 72 km hr−1. SCAMPER and TRAKER™ mobile measurement vehicles made repeated test runs while an instrumented tower measured upwind-downwind horizontal PM10 flux. AP-42 methods were used to collect silt samples and calculate PM10 emission factors. Both silt loadings and vehicle speeds were varied during the experiment. Street sweeping the as-found roadway showed an initial rise in PM10 emission rates. Both TRAKER and SCAMPER measured rapid decay of PM10 emission rates after …

A Novel Jumbo Phage Phima05 Inhibits Harmful Microcystis Sp., Ampapan Naknaen, Oramas Suttinun, Komwit Surachat, Eakalak Khan, Rattanaruji Pomwised

Civil and Environmental Engineering and Construction Faculty Research

Microcystis poses a concern because of its potential contribution to eutrophication and production of microcystins (MCs). Phage treatment has been proposed as a novel biocontrol method for Microcystis. Here, we isolated a lytic cyanophage named PhiMa05 with high efficiency against MCs-producing Microcystis strains. Its burst size was large, with approximately 127 phage particles/infected cell, a short latent period (1 day), and high stability to broad salinity, pH and temperature ranges. The PhiMa05 structure was composed of an icosahedral capsid (100 nm) and tail (120 nm), suggesting that the PhiMa05 belongs to the Myoviridae family. PhiMa05 inhibited both planktonic and aggregated …

Abrasion Resistance Of Ultra-High-Performance Concrete For Railway Sleepers, Ariful Hasnat, Nader Ghafoori

Civil and Environmental Engineering and Construction Faculty Research

This study aimed to determine the abrasion resistance of ultra-high-performance concretes (UHPCs) for railway sleepers. Test samples were made with different cementitious material combinations and varying steel fiber contents and shapes, using conventional fine aggregate. A total of 25 UHPCs and two high-strength concretes (HSCs) were selected to evaluate their depth of wear and bulk properties. The results of the coefficient of variation (CV), relative gain in abrasion, and abrasion index of the studied UHPCs were also obtained and discussed. Furthermore, a comparison was made on the resistance to wear of the selected UHPCs with those of the HSCs typically …

Laboratory Evaluation Of Geogrid-Reinforced Flexible Pavements, Mohammad Reza Sharbaf, Nader Ghafoori

Civil and Environmental Engineering and Construction Faculty Research

This study assessed the effectiveness of flexible pavements reinforced with two types of punched and drawn geogrids to reduce roadway base course thickness. Six laboratory tests were conducted using a steel cylindrical mold. Instrumentation included pressure cells placed at various locations of the test sections and a linear variable differential transformer which was placed on top of the loading system. A hydraulic actuator provided 40 kN (9 kips) cyclic load through a 305 mm (12 in) circular steel plate at a frequency of 0.77 Hz. Test results revealed that inclusion of both geogrid types in flexible pavement showed reductions in …

An Experimental Study On Concrete’S Durability And Mechanical Characteristics Subjected To Different Curing Regimes, Edgar L.S. Borrero, Visar Farhangi, Kazem Jadidi, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Considering a constant demand in construction of concrete structures to develop novel approaches for predicting the concert’s properties, a host of investigations were performed on concrete’s mechanical properties and durability under various curing regimes. However, few studies were concerned with evaluating the concrete’s durability using non-destructive concrete surface resistivity tests by applying various curing conditions. The present study compares the influence of different curing regimes on durability and compressive strength of concrete to recommend the most effective curing conditions on concrete’s characteristics. Five curing conditions including ambient, laboratory, dry oven, wet oven and 7-days were analyzed. Accordingly, a non-destructive concrete …