Digital Commons Network^™

Working From Home: A Double Edged Sword, Kathleen Farrell

Conference papers

The purpose of this paper is to investigate how working from home can be optimally managed to achieve greater work/ home harmony. Critics assert that employees who are not office-based are "actually not working". The following are challenges of working from home

-The difficulty in separating home from work

-Self- imposed pressure of working endlessly and

-The feeling of being alienated from companies’ major decisions and sometimes promotions.

Otani (2015) argues for flexibility and cites Sheryl Sandberg, Facebooks Chief Operating Officer as making the point that it is more important to measure the results rather than watching people "try". Even …

Facilitating Smart Haccp Strategies With Process Analytical Technology, Fintan Moran, Carl Sullivan, Kevin Keener, Patrick J. Cullen

Articles

The critical feature to any food management system, be it safety or quality focused, is timely and accurate product and process data. The HACCP framework is one of a systematic preventive approach that addresses hazards as a means of prevention rather than finished product inspection. The PAT initiative is a framework which also aims to change product assurance from end-product testing to preventive control through timely measurements of critical product and process parameters. The continued emergence of sensitive yet affordable sensors capable of direct measurement of biological, chemical and physical risks associated with foods during production, processing or over their …

Solar Photovoltaic System Control Topology Investigation For Power Source Mismatch, Lynette O'Callaghan

Conference papers

An investigation into solar photovoltaic (PV) system control topology selection, when partial shade is anticipated in the solar array, is presented. As available area is maximised in Building Integrated PV (BIPV) systems, shading is an inevitable consequence. The presence of partial shading in a PV array leads to multiple power peaks in the power-voltage curve, due to bypass diode sections being triggered, and an increase in module mismatch losses in the array. A building energy design software, Integrated Environmental Solutions, is used to determine the shadowed area on PV modules throughout the year, incorporating the PV system location and geometrical …

Three-Level Hysteresis Current Control Strategy For Three-Phase Four-Switch Shunt Active Filters, Samet Biricik, Hasan Komurcugil

Articles

In this study, a three-level hysteresis current-control (HCC) strategy is proposed for three-phase four-switch shunt active power filters. The four-switch topology which utilises four switching devices together with two series connected capacitors is able to reduce the cost, switching losses and improve the reliability of system. In this topology, when the current control of phases A and B is achieved successfully, the current control of phase C which is connected to the midpoint of the series connected capacitors is achieved automatically. The current control is achieved by using a three-level HCC strategy. An important consequence of using this control strategy …

Making Sense Of Irish Health Care Management: The Street Level Public Organisation (Slpo)., Vivienne Byers

Conference papers

Public service reform in modern economies has placed an emphasis on effective planning and management of service delivery to the citizen-client. This paper draws on the concept of the Street Level Public Organization (SLPO) to examine the problem of government’s top down implementation of planning reform in the delivery of public services. It does so, by exploring the implementation of strategic planning in the health sector and drawing upon field work from such implementation in the health services in Ireland and Canada. The SLPO model (McKevitt 1998) is used as an explanatory tool to add to the public sector reform …

Cars (College Awareness Of Road Safety) Project: The Redesign Of A Dublin City Centre Junction With Respect To Non-Vehicular Traffic Between The Ages Of 17-24., Alex Browne, Carlo Selman, Mark Kennedy, Niall Dolan

Students Learning with Communities

No abstract provided.

Investigation To Improve The Control And Operation Of A Three-Phase Photovoltaic Grid-Tie Inverter, Mohamed Moin Hanif

Doctoral

Solar Energy or more precisely photovoltaic energy is one of the most promising sources of electricity for the future and it can be used as a distributed generator (DG) to play its role in ‘smart grids of the future’. Distributed PV (photovoltaic) generators can provide numerous potential benefits such as augmenting the capacity of distribution systems, deferring capital investments on distribution and transmission (T&D) systems and improving power quality and system reliability. The PV energy which possesses very special I-V and P-V characteristics has to be conditioned by a PV inverter before it can be consumed by an ac load …

Online Real-Time Water Quality Monitoring And Control System, Paul Duffy, Gerard Woods, James Walsh, Michael Kane

Conference Papers

No abstract provided.

On-Line Realtime Water Quality Monitoring And Control For Swimming Pools, Paul Duffy, Gerard Woods, Sean O'Hogain, James Walsh, C. Caplier

Conference Papers

Effective swimming pool water quality monitoring and control systems are important to safeguard public health and for bather comfort. Most Irish swimming pool monitoring systems rely heavily on manual methods for sampling, testing and data recording of important parameters. Microbiological testing is infrequent and results can often take days. The goal of this research is to develop a water quality monitoring and control system with real time data logging, automatic data analysis, remote monitoring and control, microbiological sampling capabilities and online connectivity. National Instruments hardware and its software package LabView form the basis of the monitoring and control system. Several …

Control And The Protean Career: A Critical Perspective From The Multinational’S International Assignees, Marian Crowley-Henry, David Weir

Articles

Mainstream management literature and research regarding the international career has long focused on the traditional expatriate experience. In this discourse the tendency has been to outline the benefits and issues to be considered for organizations and individuals embarking on international assignments. In contrast this chapter focuses on a special group whose positioning in the structures of employment and organization is in some ways exemplary of developing trends in the global labor force. They are the highly educated permanent expatriates who remain in the host country indefinitely (that is without a pre-determined organizational option of repatriation to their initial home country). …

Electric-Powered Wheelchairs As An Assistive Technology, Aidan O'Dwyer, Malabika Basu, Eugene Coyle

Conference papers

This paper briefly outlines recent work done, particularly in control systems, for electric powered wheelchairs. These mobility aids, first developed in the 1950’s [1], were improved with the incorporation of microprocessors. The requirement for mobility aids in general is rising; for example, it is reckoned that 1.5% of the U.K. population require such aids. As an assistive technology, electric powered wheelchairs have many benefits. Nevertheless, a reliable and robust such wheelchair has still to evolve.

Hazardous Emissions Monitoring And Control, Aidan O'Dwyer, Jesus Cabello

Conference papers

There is an increasing awareness in society of the need to protect our fragile environment. Meeting environmental requirements is recognised as one of the six 21st century business drivers for automatic control. Chemical companies, for example, use automatic control to minimise waste production because of increasing prohibitions against discharge and/or disposal of toxic substances. New plants are moving towards a “zero-discharge” concept [1]. In a recent report [2], greater emphasis on automatic control is suggested as a technological response of both the speciality chemicals and pharmaceutical sub-sectors to key business drivers up to 2015. This contribution reports on recent developments …

Using Controller Tuning Formulae To Improve Performance, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this device, it is necessary to adjust the controller parameters according to the nature of the process. Thus, for effective control of a HVDC system, for example, specific values need to be chosen for the P, I and D parameters, which will be different for the values required to control, for example, an induction motor drive. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller …

Civil Control Of The Military And Police In Ireland: The Armed Forces, Tom Clonan

Books/Book chapters

The Irish armed forces, known as the Permanent Defence Forces (PDF) or ‘Oglaigh na hEireann’ number approximately 10,000 personnel across the Naval Service, Army and Air Corps. The Defence Forces in Ireland play an active role domestically in ‘Aid to the Civil Power’ Operations or ATCP Ops with the Irish police force, An Garda Siochana. The Defence Forces are also active internationally in UN peacekeeping and peace enforcement operations in Europe, Asia, Africa and the Middle East. As an organisation, the Irish Defence Forces is a direct descendant of the Irish Free State Army - initially formed in 1922 following …

Performance Improvement Using Simple Pid Controller Tuning Formulae, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this technique, it is necessary to adjust the controller parameters according to the nature of the process. Thus, for effective control of a HVDC system, for example, specific values need to be chosen for the P, I and D parameters, which will be different for the values required to control, for example, an induction motor drive. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller …

Reducing Energy Costs By Optimizing Controller Tuning, Aidan O'Dwyer

Conference papers

The proportional integral derivative (PID) controller is the most dominant form of automatic controller in industrial use today. With this technique, it is necessary to adjust the controller parameters according to the nature of the process. This tailoring of controller to process is known as controller tuning. Controller tuning is easily and effectively performed using tuning rules (i.e. formulae for controller tuning, based on process information). Such tuning rules allow the easy set up of controllers to achieve optimum performance at commissioning. Importantly, they allow ease of re-commissioning if the characteristics of the process change. The paper outlines the results …

Personal Or Organisational Control? A Critical Perspective From The Multinational’S International Assignees, Marian Crowley-Henry, David Weir

Conference papers

This paper presents findings from a qualitative study of non-national employees of multinational organisations based in Sophia Antipolis (South of France). Here twenty-three in-depth interviews with non-nationals employed by a multinational in the area, together with contextual data regarding the particular case of Sophia Antipolis contribute to the discussion on power and control in an international, organisational context. Irrespective of the initial motivations to follow on an international career, this study highlights the tensions individuals encounter in their desire to retain their international status while seeking out a more individual, balanced, protean career, potentially beyond their current employing organisations. Extracts …

An Electro-Oculogram Based System For Communication And Control Using Target Position Variation, Ronan Fitzmaurice, Ted Burke, Annraoi De Paor

Conference Papers

In this paper we describe a novel mode of human computer interaction based on gaze tracking using the electro-oculogram (EOG). Despite the relative simplicity of recording this signal, it is often discounted as a reliable method of gaze tracking because of problems arising from changing sensitivity and DC drift. We describe an original technique, Target Position Variation (TPV), which addresses this issue by presenting moving icons which, when followed with the eye, create a corresponding pattern in the EOG signal which can be used to infer the correct gaze position and to compensate for variations in sensitivity.

Modelling And Control Of A Suspension System For Vehicle Applications, Padraig Dowds, Aidan O'Dwyer

Conference papers

This paper discusses the modelling of passive and active suspension systems in a car, and the subsequent design of appropriate feedback controllers for the active suspension system. The models will be investigated using a quarter car model and a full car model approach.

Control Loop Performance Assessment: A Classification Of Methods, Niall O'Connor, Aidan O'Dwyer

Conference papers

This paper presents an overview of a number of controller performance assessment techniques. The techniques discussed are divided into five categories, namely, time domain assessment, frequency domain assessment, minimum variance control (MVC) as a benchmark, statistical analysis, and other more ‘problem specific’ assessment techniques. Recent work, by various authors, in each of the five categories is outlined.

Closed Loop Identification Of A First Order Plus Dead Time Process Model Under Pi Control, Tony Kealy, Aidan O'Dwyer

Conference papers

Abstract -- This paper discusses the estimation of the parameters of a first order plus dead-time process model using the closed-loop step response data of the process under proportional plus integral (PI) control. The proportional gain and the integral time, in the PI controller, are chosen such that the closed-loop step response exhibits an under-damped response. From this response data, five characteristic points are used to determine a second order plus dead-time model and subsequently, the frequency response of the closed-loop system. Knowing the dynamics of the closed-loop system and the dynamics of the controller, the open-loop dynamics of the …

Clinical Assessment Of The Quantitative Posturography System (Qps), Jacinta Browne, G. O'Hare, A. Finn, J. Colin

Articles

The objectives of this study were to evaluate a novel design dynamic force platform the Quantitative Posturography System (QPS). The evaluation consisted of identifying the effects due to ageing and disease of the postural control system and also to examine the relationship between functional performance and postural sway. An AOVA design and Pearson-Product correlation design were used. Seventy healthy subjects, seven subjects with Parkinson’s disease and eight subjects with a history of falls took part in the study. It was found that the QPS was able to identify changes due to both the ageing process and disease on the postural …

Multiple Model Networks In Non-Linear System Modelling For Control – A Review, Ruiyao Gao, Aidan O'Dwyer

Conference papers

Non-linear processes, by their nature, are non-uniform and invariably require custom designed control schemes to deal with individual characteristics. No general theory deals comprehensively with the wide range of non-linear systems encountered. In an attempt to accurately model non-linear dynamical systems, a wide variety of techniques have been developed such as non-linear auto-regressive moving average with exogeneous inputs (NARMAX) models (Chen and Billings, 1989), Weiner models (Schetzen, 1981), Hammerstein models (Billings and Fakhouri, 1982) and Multiple Layer Perceptron (MLP) neural networks (Narendra and Kannan, 1990). While the accuracy of such models offers a potentially significant improvement over linear models, the …

Using Statistics In Industry - Quality Improvement Through Total Process Control, Edward Sweeney, Gordon Betteley, Neville Mettrick, David Wilson

Books/Book chapters

No abstract provided.

Standardised Control Techniques For Induction Generators In Both Grid-Connected And Isolated Applications, John Brazil, Aidan O'Dwyer, M. Murphy

Conference papers

Induction generators are particularly suitable for small hydro applications and are widely used at present. However, with conventional grid-connected techniques, it is not always possible to use them in regions with weak grids because of excessive connection transients. Consequently, their many advantages cannot be fully exploited in these regions. Standardised control systems have been developed by ECS for isolated applications of induction generators and these will now be further developed to permit reduced-transient grid connections.