Digital Commons Network^™

On Networking The Writing Center: Social Media Usage And Non-Usage, Amanda M. May

Writing Center Journal

This article presents findings from an IRB-approved study about writing center social media use and nonuse using survey data keyed to five factors: reasons for nonuse; purposes for use; platforms used; approaches to use that consider platforms and target audiences; and recommendations to other writing centers to use or not use social media. While the 91 writing centers not using social media commonly cited a lack of time, lack of staff, and lack of experience as reasons, the majority of writing centers in this study maintained a social media presence. These 153 writing centers tended to use multiple platforms, commonly …

In Their Own Words: Forgotten Women Pilots Of Early Aviation, Fred Erisman

Purdue Studies in Aeronautics and Astronautics

Amelia Earhart’s prominence in American aviation during the 1930s obscures a crucial point: she was but one of a closely knit community of women pilots. Although the women were well known in the profession and widely publicized in the press at the time, they are largely overlooked today. Like Earhart, they wrote extensively about aviation and women’s causes, producing an absorbing record of the life of women fliers during the emergence and peak of the Golden Age of Aviation (1925–1940). Earhart and her contemporaries, however, were only the most recent in a long line of women pilots whose activities reached …

Drones On The Rise: Societal Misperceptions Of Small Unmanned Aircraft Systems, Renee Keilman

The Journal of Purdue Undergraduate Research

Throughout the past decade, small unmanned aircraft systems (sUAS) have been on the rise in both the civilian and military sectors. It is forecasted that in the near future they will create thousands of jobs and billions in tax revenue due to their ability to execute difficult and hazardous tasks safely, efficiently, and cost-effectively. However, one current issue with the proliferation of the technology is a shortage of skilled employees due to a lack of education and common negative public misperceptions associated with them.

To investigate this, responses from a mixed-methods survey will be analyzed. Within the survey, questions such …

No Bones About It: How Digital Fabrication Changes Student Perceptions Of Their Role In The Classroom, Alexandria K. Hansen, Jasmine K. Mcbeath, Danielle B. Harlow

Journal of Pre-College Engineering Education Research (J-PEER)

This study used cultural historical activity theory to make meaning of a digital fabrication project situated in the complexity of a classroom. Using an ethnographic perspective, we observed 14 students (aged 13–14) in a middle school’s creative design and engineering class inspired by the Maker Movement. Working with the classroom teacher, a professional stuntman tasked students with fabricating a prosthetic bone for use as a movie prop using their understanding of science, technology, engineering, and mathematics. Teacher interviews and student focus groups revealed differences in perceptions between their science class and engineering class. Additionally, affordances and constraints of the 3D …

Zooming Into A Tinkering Project: The Progression Of Learning Through Transitional Objects, Priyanka Parekh, Elisabeth R. Gee

Interdisciplinary Journal of Problem-Based Learning

The Maker Movement has been received by the field of K–12 education with great enthusiasm as a way of teaching STEM content to children. We call attention to and identify learning opportunities in children’s projects created in a playful, informal environment with easily available materials. In keeping with research in the field of maker education and learning sciences, we describe tinkering as a constructionist learning activity in which meaning making is captured through transitional objects (Bamberger, 1995). First, we examine one specific tinkering project and identify transitional objects within the project. Next, we discuss the process of meaning making as …

Answering Food Insecurity: Serving The Community With Food And Knowledge Using Technology, Courtney Simpson

Purdue Journal of Service-Learning and International Engagement

The courses of Tech120, CGT110, and ENGT 180/181 and Red Gold at Purdue collaborated to design a robot that would plant and water a garden for a local community charter school. The students centered the project on the users’ needs for fresh food, nutrition education, and early exposure to STEM for children. The school, Anderson Preparatory Academy (APA), is comprised of many children who come from low-income families and are in the free or reduced lunch program. Inspired from “Farm Bot,” a similar system that allows for almost hands-free gardening, the “Boiler Bot” is designed to be scalable so children …

The Significance Of Dewey’S Democracy And Education For 21st-Century Education, Lance E. Mason

Education and Culture

This paper explores the significance of Dewey’s Democracy and Education for “21st-century education,” a term used by proponents of curricular standardization and digital ubiquity in classrooms. Though these domains have distinct advocacy groups, they often share similar assumptions about the primary purposes of schooling as career preparation. In Democracy and Education, Dewey argues for a broader purpose of education—that of cultivating a social spirit in students. Because of contemporary dispositional challenges in the broader society, Dewey’s perspective offers a timely and relevant way to reconceptualize the purposes of schooling in ways that can effectively address current social challenges.

Impacts Of Professional Development In Integrated Stem Education On Teacher Self-Efficacy, Outcome Expectancy, And Stem Career Awareness, John Geoffrey Knowles

Purdue Polytechnic Doctoral Dissertations

This research analyzed the effects of teacher professional development and lesson implementation in integrated Science, Technology, Engineering, and Math (STEM) on: 1.) Teacher self-efficacy and their confidence to teach specific STEM subjects; 2.) Teaching outcome expectancy beliefs concerning the impact of actions by teachers on student learning; and 3.) Teacher awareness of STEM careers. High school science and technology education teachers participating in the Teachers and Researchers Advancing Integrated Lessons in STEM (TRAILS) project experimental group attended a ten-day summer professional development institute designed to educate teachers in using an integrated STEM education model to implement integrated STEM lessons. The …

Technology From The Perspective Of Society And Public Interest, Chanwoon Park

Purdue Polytechnic Doctoral Dissertations

The ultimate goals of this study were to determine ways to reconcile technology with public interest and to understand the relationship between what we know and how we feel about technology. To achieve the goals, related literatures were reviewed; the mechanism of technology development was described with empirical data; and human perception of technology was tested with a survey. The duality of technology that implied technological inherencies of technical reason and social meanings was the principle assumption of the study. Neutrality of technology becomes a myth with the presence of social meanings embodied in technology. Given the huge impact of …

Netpoint®, Purdue Ect Team

ECT Fact Sheets

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Standards Resources For Engineering And Technology, Margaret Phillips, Sarah Huber

Libraries Faculty and Staff Scholarship and Research

This webliography is a selective compilation of the following: major standards bodies that create or approve standards frequently used by engineers and technologists, standards database aggregators, web sites that provide free or low cost, full-text access to standards, and standards education resources. Only major standards bodies that operate in the U.S. or on an international level are incorporated, excluding non-U.S. national and regional bodies that create or coordinate standards activities in other countries. The standards education resources listed are appropriate for university-level students. All of the resources included are English language web sites. Additionally, all of the resources included are …

From Mechanic To Designer: Evolving Perceptions Of Elementary Students Over Three Years Of Engineering Instruction, Anastasia M. Rynearson

Open Access Dissertations

Due in part to increasing state standards that require engineering in K-12 curricula and the Next Generation Science Standards’ incorporation of engineering outcomes, inclusion of engineering into elementary classrooms is on the rise. Teacher development and experiences in learning about and implementing engineering have been studied, but elementary students’ experiences when learning about engineering have not been explored.

The purpose of this study is to address the question: How do elementary students’ knowledge of, attitudes toward, and overall conceptions of engineering evolve over three years of engineering instruction?

This study follows seven elementary school students through three years of engineering …

An Analysis Of The Current Strength Of The Academic Relationship With The Aerospace Industry, James A. Stratton

Open Access Dissertations

The objective of this research was to discover which methods of technology transfer were most commonly accessed within the Indiana manufacturing sector in an effort to best serve companies in the Hoosier State. Previous work has explored the perceived importance of various academic sources, but there has not been an investigation to identify the specific preferences of industry professionals. If these preferences can be identified, university assistance programs and other academic engagement programs will be able to predict, and hopefully influence how to grow and develop the domestic manufacturing sector, ultimately strengthening the channels of knowledge transfer between academia and …

Cultivating Civic Habits: A Deweyan Analysis Of The National Council For The Social Studies Position Statement On Guidelines For Social Studies Teaching And Learning, Lance E. Mason

Education and Culture

The National Council for the Social Studies (NCSS) position statement on Curriculum Guidelines for Social Studies Teaching and Learning provides a conceptual outline for contemporary social studies curriculum, calling for social studies learning that is meaningful, integrated, value-based, challenging, and active. This is largely consistent with a Deweyan approach to social studies, though the statement’s lack of theoretical grounding makes it vulnerable to misappropriation. By filtering the statement’s framework through Dewey’s pragmatism, such vulnerabilities can be articulated, while offering a deeper exploration of both the possibilities and challenges for implementation.

Best Practices For Maximizing Driver Attention To Work Zone Warning Signs, Satish V. Ukkusuri, Konstantina Gkritza, Xinwu Qian, Arif Mohaimin Sadri

JTRP Technical Reports

Studies have shown that rear-end crashes in the advance warning area for a work zone are the most common type of work zone crashes. Driver inattention (or distraction) is reported as the most common issue and a major contributing factor to those types of crashes. As such, there is a need to identify the technologies that are successful in alerting drivers when approaching work zones.

Post-Tensioned Concrete Shear Wall, Purdue Ect Team

ECT Fact Sheets

The post-tension concrete shear wall by Tipping Mar will replace the conventional concrete shear wall in earthquake prone areas in many instances, depending on the height and scale of the building.

Rapid Drying Concrete, Purdue Ect Team

ECT Fact Sheets

One of the essential problems that are faced during construction is the drying of concrete and the presence of moisture which affects floor coverings that need to be placed. The rapid-drying characteristic in Aridusâ concrete allows for the quick reduction of moisture vapor that travels through the concrete pores of the concrete.

Ap Alternatives Modular Solar Racking, Purdue Ect Team

ECT Fact Sheets

Solar panels have been used to generate and supply electricity in various applications such as residential and commercial buildings. Therefore, a need for a quicker approach to installation as well as the need to reduce workmanship to speed up the process is needed. Solar racks are developed through the use of automated equipment to “preassemble the racking hardware, pre-install the solar modules, and drive helical anchors into the ground rapidly”. So instead of installing one panel at a time, AP Alternatives has created a new method that uses machines to make the process easier. This new automation of the installation …

Prefabricated Building, Purdue Ect Team

ECT Fact Sheets

With the continuous demand for construction of new buildings, an easier, more sustainable, energy-efficient and environmentally friendly building method is necessary to save time, energy and cost. Hence, there has been an increasing need for a system such as BROAD sustainable building (BSB). A form of prefabricated building by BROAD Sustainable Building Co., LTD (BSB). It consists of flooring and ceiling, embedded shafts of ventilation, water supply & drainage, electricity and lighting. Other items include pillars, diagonal bracings, doors, windows, walls and sanitary wares, air conditioning, air quality products, lifts, building thermal insulations.

Vertical Icf Wall System, Purdue Ect Team

ECT Fact Sheets

Traditional ICF systems’ installation is tedious and labor intensive resulting in out of level, bowing, and snaking walls with a significant amount of bracing adding to the cost. ICF (Insulated Concrete Form) walls are a form of structural walls used for construction. Hobbs Vertical ICF system uses less concrete, more recycled material and requires less labor for construction. The furring assemblies and retainer clips of the Hobbs VICF system are made from 100% recycled post-industrial waste.

3d Printing For Bricks, Purdue Ect Team

ECT Fact Sheets

Building Bytes, by Brian Peters, is a project that uses desktop 3D printers to print bricks for architecture. Instead of using an expensive custom-made printer, it uses a normal standard 3D printer which is available for everyone and makes it more accessible and also easier for fabrication.

Technology Use Of Online Instructors With High Self-Efficacy: A Multiple Case Study, Barbara L. Albee

Open Access Dissertations

The purpose of this qualitative multiple case study was to understand how online instructors with perceived high self-efficacy for online teaching use technology in the online class and how their use compares to a common list of best practices for use of technology with online instruction. One-on-one interviews with four case study participants were the main source of data collection along with direct observations of the participants' online courses. The case study participants were selected based on results from a Sense of Efficacy for Online Teaching Scale and willingness to move forward with the case study. Conventional data analysis was …

After-Hours Mobile Technology Use And Its Effect On Burnout Experienced By Student Affairs Professionals, Anne Stark

Open Access Dissertations

This study examined the possible effect between the after-hours mobile technology use by student affairs professionals and work place burnout experienced by student affairs professionals. Similar to Owens (2014), data for this study were collected by employing the Maslach Burnout Inventory (Christina Maslach, Jackson, & Leiter, 1986). The collected data in this study were explored by the statistical method of multiple regression. While the number of responses was not high enough to determine statistically significant differences, the data did not show a strong correlation between after-hours mobile technology use and workplace burnout experienced by student affairs professionals.

Characterizing Enabling Innovations And Enabling Thinking, Freddy Solis

Open Access Dissertations

The pursuit of innovation is engrained throughout society whether in business via the introduction of offerings, non-profits in their mission-driven initiatives, universities and agencies in their drive for discoveries and inventions, or governments in their desire to improve the quality of life of their citizens. Yet, despite these pursuits, innovations with long-lasting, significant impact represent an infrequent outcome in most domains. The seemingly random nature of these results stems, in part, from the definitions of innovation and the models based on such definitions. Although there is debate on this topic, a comprehensive and pragmatic perspective developed in this work defines …

A Technological Approach To Bloodstain Pattern Analysis, Michael Keith Burgess

Open Access Theses

The field of Bloodstain Pattern Analysis has had many achievements since the mid 1900’s, such as using computers in a physical crime scene. However, the computer aided programs that are in use today are sometimes bulky, many times expensive, and always require a large amount of training to be used properly. In addition to this problem, many investigators use the same formula of determining the angle of incidence on every type of surface, planar or not, which creates mistakes in their findings. Using a technological approach, this investigation examined a new approach for collecting data from bloodstains. This examination answered …

Towards Digital Art In Information Society, Montse Arbelo, Joseba Franco

CLCWeb: Comparative Literature and Culture

In their article "Towards Digital Art in Information Society" Montse Arbelo and Joseba Franco propose the development of the platform of a Network of Experimental Centers be formed by small groups of people who are qualified and who seek optimal operational effectiveness and who dedicate their resources to the production of digital content and we offer artechmedia <http://www.artechmedia.org> as a base point of departure. Such an international network in a collaborative structure based on national networks would make possible to coordinate existing resources to develop social networks, generate and promote content, engage in forums of discussion and creativity workshops, and …

Impact Profile: Tech 120-Nathan Mentzer, Jason A. Ware

IMPACT Profile Directory

This profile highlights the course redesign and transformation of a foundational first-year course in Purdue University’s College of Technology. The faculty involved in this redesign were focused primarily on accomplishing two things with the course transformation. First, faculty recognized that the initial course objectives focused on students learning general skills that are taught throughout the University – career awareness and study skills. The goal with the course redesign was for students to learn skills that are unique to the fields of study within the College and for students to experience a student-centered pragmatic approach to teaching and learning. Second, faculty …

Online Simulations For Conceptual Understanding Of Thermoelectric Devices, Maria De Rosario Uribe

Open Access Theses

Computer simulations have been extensively used with educational purposes. However, the successful implementation in order to improve learning has been a matter of debate in research in education. The purpose of this case study is to analyze how a set of computer simulations can improve student understanding of thermoelectric devices. The study was developed in a learning context characterized by the advanced degree of difficulty of the topics treated, the high academic level of education of the students, and the online nature of the learning environment. As part of the course, students were provided with instructional materials that guided the …

Editors' Introduction, Jiyoon Jung, Michael M. Grant

Interdisciplinary Journal of Problem-Based Learning

No abstract provided.