Digital Commons Network^™

Controller Area Network With Flexible Data Rate (Can Fd) Eye Diagram Prediction, Junyong Park, Manho Lee, Shinyoung Park, Jonghoon Kim, Joungho Kim, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

A method for predicting the eye diagram for a controller area network with a flexible data rate (CAN FD) is proposed in this article. A CAN FD changes a data rate according to the status to overcome the limitation of latency. In other words, when data to be transmitted are accumulated, the CAN FD increases the data rate up to 5 Mb/s. The CAN FD has a bus topology consisting of multiple electronic control units, which results in a significant amount of signal reflection. Thus, the above causes the signal integrity analysis uncertain. To avoid this, this article proposes a …

Engineering Technology Programs And Technical Standards: Investigating Library Access And Course Integration, Margaret Phillips, Paul B Mcpherson, Danielle Leclerc

Libraries Faculty and Staff Scholarship and Research

Due to ABET accreditation requirements and industry expectations, integrating technical standards into Engineering Technology (ET) curricula is crucial for student success. However, previous studies have shown that faculty report access and knowledge challenges in working to integrate standards into ET course content. Additionally, academic librarians have long acknowledged there are many issues with providing access to standards to campus users, such as high costs and extensive digital rights management (DRM) restrictions. The purpose of this study is to conduct an environmental scan of library websites at institutions with ET programs to investigate library-provided access to standards and to survey ET …

Predicting Engineering Integration In K-12 From The Perspective Of Pre-Service Teachers, Pilar Pazos, Francisco Cima, Jennifer Kidd, Kristie Gutierrez, Dorothy Faulkner, Minjung Lee, Krishna Kaipa, Orlando Ayala

Engineering Management & Systems Engineering Faculty Publications

The integration of engineering content at the pre-college level is gaining global traction as a strategy to improve learning outcomes and to promote inclusion and diversity in STEM (Science, Technology, Engineering, and Mathematics). Preservice teacher (PST) programs have become natural insertion points for integration efforts by providing future K-12 teachers with the resources and preparation to teach engineering as part of their academic preparation. There is a need to understand the socio-cognitive mechanisms by which teacher preparation programs can help teachers to integrate engineering in their future classrooms. This work examines how an innovative cross-disciplinary program impacted important social-cognitive drivers …

Professional And Organizational Leadership Role In Ethics Management: Avoiding Reliance On Ethical Codification And Nurturing Ethical Culture, Islam H. El-Adaway, Marianne Jennings

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The engineering profession has experienced some ethical cases that were rarely reported, scrutinized, or discussed because: they did not necessarily represent violations of existing codes even if they breached ethical principles; those within the organization were not prepared to take steps to address the issues or impose sanction; an/or some of the personnel associated with these cases resorted to silence to avoid being labeled as trouble-makers in their organizations and, perhaps, more broadly, in society. The goal of this paper is to heighten managerial awareness of ethical issues, interrelated ethical lapses, and appropriate responsive actions within professional engineering communities. As …

Prior Art Research In The Capstone Design Experience: A Case Study Of Redesigned Online And In-Person Instruction, Graham Sherriff, Dustin Rand

University Libraries Faculty and Staff Publications

Exploration of “prior art”—the state of a technology’s development, as manifested in literature, documentation, and artifacts—has many benefits for engineering students. It expands their understanding of the design problem, reveals a range of possible solutions, and develops research skills important to professional practice. While prior art often includes patents and research literature, it can include any type of publication or document. This paper presents an innovative approach to a prior art review assignment in the capstone course for mechanical, electrical, and biomedical engineering students at the University of Vermont (UVM). The assignment and accompanying instruction were redesigned in 2018–2019 to …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

A Primer On The Human Readiness Level Scale (Ansi/Hfes 400-2021), Kelly Steelman, Holly Handley, Katie Plant (Ed.), Gesa Praetorius (Ed.)

Engineering Management & Systems Engineering Faculty Publications

"The Human Readiness Level (HRL) Scale is a simple 9-level scale for evaluating, tracking, and communicating the readiness of a technology for safe and effective human use. It is modeled after the well-established Technology Readiness Level (TRL) framework that is used throughout the government and industry to communicate the maturity of a technology and to support decision making about technology acquisition. Here we (1) introduce the ANSI/HFES 400-2021 Standard that defines the HRL scale and (2) provide concrete examples of evaluation activities to support the application of HRLs in the development of automated driving systems."

Artificial Intelligence Method For The Forecast And Separation Of Total And Hvac Loads With Application To Energy Management Of Smart And Nze Homes, Rosemary E. Alden, Huangjie Gong, Evan S. Jones, Cristinel Ababei, Dan M. Ionel

Electrical and Computer Engineering Faculty Publications

Separating the HVAC energy use from the total residential load can be used to improve energy usage monitoring and to enhance the house energy management systems (HEMS) for existing houses that do not have dedicated HVAC circuits. In this paper, a novel method is proposed to separate the HVAC dominant load component from the house load. The proposed method utilizes deep learning techniques and the physical relationship between HVAC energy use and weather. It employs novel long short-term memory (LSTM) encoder-decoder machine learning (ML) models, which are developed based on future weather data input in place of weather forecasts. In …

Equivalent Electric And Heat-Pump Water Heater Models For Aggregated Community-Level Demand Response Virtual Power Plant Controls, Huangjie Gong, Tim Rooney, Oluwaseun M. Akeyo, Brian T. Branecky, Dan M. Ionel

Electrical and Computer Engineering Faculty Publications

Advanced control techniques may be used to establish a virtual power plant to regulate the operation of electric water heaters, which may be regarded as a “uni-directional battery” and a major component of a hybrid residential energy storage system. In order to estimate the potential of regulating water heaters at the aggregated level, factors including user behavior, number of water heaters, and types of water heaters must be considered. This study develops generic water heater load curves based on the data retrieved from large experimental projects for resistive electric water heaters (EWHs) and heat pump water heaters (HPWHs). A community-level …

A Two-Level Information Modelling Translation Methodology And Framework To Achieve Semantic Interoperability In Constrained Geoobservational Sensor Systems, Paul Stacey

Doctoral

As geographical observational data capture, storage and sharing technologies such as in situ remote monitoring systems and spatial data infrastructures evolve, the vision of a Digital Earth, first articulated by Al Gore in 1998 is getting ever closer. However, there are still many challenges and open research questions. For example, data quality, provenance and heterogeneity remain an issue due to the complexity of geo-spatial data and information representation.

Observational data are often inadequately semantically enriched by geo-observational information systems or spatial data infrastructures and so they often do not fully capture the true meaning of the associated datasets. Furthermore, data …

Demand Response Of Hvacs In Large Residential Communities Based On Experimental Developments, Huangjie Gong, Evan S. Jones, Rosemary E. Alden, Andrew G. Frye, Donald G. Colliver, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Heating, ventilation, and air-conditioning (HVAC) systems contribute the largest electricity usage for a residential community. Modeling of the HVAC systems facilitate the study of demand response (DR) at both the residential and the power system level. In this paper, the equivalent thermal model of a reference house was proposed. Parameters for the reference house were determined based on the systematic study of experimental data obtained from fully instrumented field demonstrators. The aggregated HVAC load was modeled based on the reference house while considering a realistic distribution of HVAC parameters derived from data that was provided by one of the largest …

Lstm Forecasts For Smart Home Electricity Usage, Rosemary E. Alden, Huangjie Gong, Cristinel Ababei, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

With increasing of distributed energy resources deployment behind-the-meter and of the power system levels, more attention is being placed on electric load and generation forecasting or prediction for individual residences. While prediction with machine learning based approaches of aggregated power load, at the substation or community levels, has been relatively successful, the problem of prediction of power of individual houses remains a largely open problem. This problem is harder due to the increased variability and uncertainty in user consumption behavior, which make individual residence power traces be more erratic and less predictable. In this paper, we present an investigation of …

Design A Class Infusion Project Of Asme Geometric Dimensioning And Tolerancing Standard, Cheng Y. Lin, Hamid Eisazadeh, Alok K. Verma

Engineering Technology Faculty Publications

This paper describes the development of a short course of Geometric Dimensioning and tolerancing (GD&T) for Mechanical Engineering (ME)/Mechanical Engineering Technology (MET) students in their freshman/sophomore classes. This class-infusion project was assisted and validated by an ASME Standards and Certification Engineer and was jointly sponsored by the ASME Committee on Engineering Education and the ASME Council on Standards and Certification. To assess the performance of the project, an instrument was developed with multiple-choice problems and survey questions for the students. The results of a field test in a sophomore manufacturing class are presented. The module is available at the ASME …

Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

In 2017, the BIM Innovation Capability Programme team applied five macro BIM maturity conceptual models to capture the capability of the Irish construction industry and assess its BIM maturity. The results found that while Ireland is mature for modelling processes, it is less developed with regards to collaboration processes and policies. Ireland also ranked poorly when it came to regulatory frameworks, measurements and benchmarks compared to a number of countries which also applied the same conceptual models. At the time, the findings highlighted that Ireland’s diffusion dynamic was middle out, meaning that larger organisations or industry associations were pushing the …

Tag Ownership Transfer In Radio Frequency Identification Systems: A Survey Of Existing Protocols And Open Challenges, Eyad Taqieddin, Hiba Al-Dahoud, Haifeng Niu, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

Radio frequency identification (RFID) is a modern approach to identify and track several assets at once in a supply chain environment. In many RFID applications, tagged items are frequently transferred from one owner to another. Thus, there is a need for secure ownership transfer (OT) protocols that can perform the transfer while, at the same time, protect the privacy of owners. Several protocols have been proposed in an attempt to fulfill this requirement. In this paper, we provide a comprehensive and systematic review of the RFID OT protocols that appeared over the years of 2005-2018. In addition, we compare these …

A Novel Real-Time Non-Invasive Hemoglobin Level Detection Using Video Images From Smartphone Camera, Golam Mushih Tanimul Ahsan, Md. O. Gani, Md Kamrul Hasan, Sheikh Iqbal Ahamed, William Chu, Mohammad Adibuzzaman, Joshua Field

Electrical and Computer Engineering Faculty Research and Publications

Hemoglobin level detection is necessary for evaluating health condition in the human. In the laboratory setting, it is detected by shining light through a small volume of blood and using a colorimetric electronic particle counting algorithm. This invasive process requires time, blood specimens, laboratory equipment, and facilities. There are also many studies on non-invasive hemoglobin level detection. Existing solutions are expensive and require buying additional devices. In this paper, we present a smartphone-based non-invasive hemoglobin detection method. It uses the video images collected from the fingertip of a person. We hypothesized that there is a significant relation between the fingertip …

Standardized Testing Of Non-Standard Photovoltaic Pavement Surfaces, John H. Nussbaum, Robert A. Lake, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

Emerging photovoltaic products have expanded the applications for the technologies into markets previously unconsidered for what was thought to be a delicate electronic product. One company leading this effort, Solar Roadways, Incorporated, is producing pavement replacing photovoltaic systems and proposing their use in everything from sidewalks to runways. Current pavement testing methods cannot be applied to these non-homogenous structures to identify if they can support the required loads. However, the standards called out specifically for pavements may be able to be translated to these products and their non-homogenous structures and non-standard materials to identify if they are able to perform …

Enhancing The Thermal Performance Of Temporary Fabric Structures For The Advanced Energy Efficient Shelter System, Justin E. Eshleman, Robert A. Lake, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

The focus of this research is to characterize the thermal load on temporary fabric shelters deployed in the Middle East in order to establish realistic contract specification for the thermal performance of future shelters. Three different testing methods were utilized to evaluate shelter thermal performance. Small-scale tests allowed for economical comparisons of different shelter materials and configurations.

Design Of Exercise Equipment For Wheelchair Users: A Case Study In Accessibility Standards, Kate Craddock Rescsanszky

Honors Scholar Theses

Engineers must consider a number of aspects of every project they work on. Accessibility is one aspect that presents a unique challenge. Rather than being based on absolute material parameters, accessibility is based on how people interact with technology and their built environment. Since 1990, the Americans with Disabilities Act has been the predominant standard in accessibility because of its wide reach and legal mandate. In addition to the ADA, the ASTM and the Institute for Universal Design offer helpful guidelines for designing for accessibility. However, in addition to standards, guidelines, and recommendations, it is important to consult the intended …

Engineering Education For High-Ability Students, Branson Lawrence, Diane Hinterlong, Laurie S. Sutherland

Publications & Research

Over the course of their careers, engineers command a breadth and depth of knowledge from science, mathematics, society, politics, and economics that is needed for continuously updating their knowledge of the latest discoveries and advances. Driven by curiosity and enabled by rapid information technology, engineers are kept abreast of the latest advancements almost instantaneously. Today’s scientific knowledge is fluid and complex, yet these traits of engineering remain constant: the ability to define structure, plan, repeatedly evaluate, and align results to the initial objective. Engineering teachers need to facilitate their students’ ability to access information effectively and to apply it appropriately, …

Moore’S Law, Metcalfe’S Law, And The Theory Of Optimal Interoperability, Christopher S. Yoo

All Faculty Scholarship

Many observers attribute the Internet’s success to two principles: Moore’s Law and Metcalfe’s Law. These precepts are often cited to support claims that larger networks are inevitably more valuable and that costs in a digital environment always decrease. This Article offers both a systematic description of both laws and then challenges the conventional wisdom by exploring their conceptual limitations. It also explores how alternative mechanisms, such as gateways and competition, can permit the realization benefits typically attributed to Moore’s Law and Metcalfe’s Law without requiring increases in network size.

Path Loss In An Urban Peer-To-Peer Channel For Six Public-Safety Frequency Bands, David W. Matolak, Qian Zhang, Qiong Wu

Faculty Publications

We provide path loss data and models for a peer-to-peer wireless channel for an urban environment in six public safety bands, for simultaneous transmission to five spatially separated receiving sites. Results are from measurements in Denver, Colorado. The six frequencies at which we measured are (in MHz) 430, 750, 905, 1834, 2400, and 4860. Both line-of-sight and non-line-of-sight conditions were covered, and we quantify path loss exponents and linear-fit standard deviations as functions of frequency and location. Line-of-sight results agree with prior work, but non-line-of-sight exponents, from 3.6-7.3, are generally larger than in most other references.

Engineering, Martin K. Wallace

Library Staff Publications

This chapter describes a standards-based framework of information literacy instruction (ILI) for undergraduate engineering students. It begins by identifying characteristics of information literacy that are most relevant to the engineering curriculum, framed by a review of the ACRL’s Information Literacy Standards for Science and Engineering/Technology. Recommendations for delivering ILI to undergraduate engineering students are given, drawing from a pilot program for integrating information literacy into the Mechanical Engineering Technology (MET) program at the University of Maine. Finally, assessment strategies for ILI curricula are provided, based on examples from the MET pilot. Throughout the chapter, core engineering information resources are identified, …

Clarifications Of A Datum Axis Or Centerplane Specifying In Maximum Material Condition Of Geometric Dimensioning And Tolerancing, Cheng Y. Lin, Jennifer G. Michaeli, Mileta Tomovic

Engineering Technology Faculty Publications

Engineering and Engineering Technology students and professionals learning the processes and standards in computer-aided design (CAD) and computer-aided manufacturing (CAM) should learn and understand the methodology of geometric dimensioning and tolerancing (GD&T) to describe the intent and requirements for part and assembly geometries. Correct application of GD&T ensures that the part and assembly geometry defined on the drawing will have the desired form and fit (within limits) and function as intended. One learning difficulty in understanding GD&T is the concept of defining a datum axis or center plane using Maximum Material Condition (MMC). To overcome this difficulty, a new approach …

Agenda: Monitoring And Protecting Groundwater During Oil And Gas Development, University Of Colorado Boulder. Natural Resources Law Center. Intermountain Oil And Gas Bmp Project, Colorado Water And Energy Research Center

Monitoring and Protecting Groundwater During Oil and Gas Development (November 26)

This workshop is cosponsored by the Intermountain Oil and Gas BMP Project and the Colorado Water and Energy Research Center, with financial support from the Environmentally Friendly Drilling Project and the CU-Boulder Outreach Committee.

The Colorado Oil and Gas Conservation Commission (COGCC) recently initiated a rule making process to develop new, statewide regulations for baseline sampling and monitoring of groundwater near new oil and gas wells. COGCC’s first rule making hearing was held November 14; the rule is expected to be finalized December 10. This workshop will discuss oil and gas development procedures that can impact groundwater, the current rules …

The Value Of Modeling And Simulation Standards, Andrew J. Collins, David Meyr, Solomon Sherfey, Andreas Tolk, Mikel Petty

VMASC Publications

In the current economic climate, there is a requirement to justify all government spending by demonstrating the added-value that the expenditure gives. Modeling and Simulation (M&S) community is not exempted from this rule. This paper focuses on attempts to value standards and demonstrates that even though a myriad of different standards exist in the United States today, no one has "cracked the nut" on determining their value. This does not mean that standards are without value. The paper highlights their importance to our society and human development as a whole. Thus if we cannot give a value to M&S standards, …

Feasibility Of Passivhaus Standards And Alternative Passive Design On Climatic Zones Of Chile - Determination Of Energy Requirements With Dynamic Simulation, Javier Carrasco Eade, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part A

The current building envelope standards from Article 4.1.10 of the “General Law of Urban Planning and Construction” The current building envelope standards from Article 4.1.10 of the “General Law of Urban Planning and Construction” in Chile are applied on a typical residential building for the climate of Concepción (36° Latitude South, 73° Longitude West) and a detailed energy simulation program is used to assess the energy performance of this building. The simulation results of the Chilean standards are then compared with simulation results of PassivHaus standards upon the same building layout and with simulation results from the same typical building …

Slides: The Costs And Benefits Of Best Management Practices: Insights From The Marcellus Shale, Timothy J. Considine

Best Management Practices (BMPs): What? How? And Why? (May 26)

Presenter: Timothy J. Considine, School of Energy Resources, Department of Economics and Finance, University of Wyoming

15 slides

Slides: Assessing Opportunities And Barriers To Reducing The Environmental Footprint Of Oil And Gas Development In Utah, Douglas Jackson-Smith, Lorien Belton, Brian Gentry, Gene Theodori

Opportunities and Obstacles to Reducing the Environmental Footprint of Natural Gas Development in Uintah Basin (October 14)

Presenter: Dr. Douglas Jackson-Smith, Utah State University--Logan Campus

37 slides

Slides: Rethinking Western Water Law: Restoring The Public Interest In Western Water Law, Mark Squillace

Western Water Law, Policy and Management: Ripples, Currents, and New Channels for Inquiry (Martz Summer Conference, June 3-5)

Presenter: Mark Squillace, Director, Natural Resources Law Center, University of Colorado Law School

20 slides