Digital Commons Network^™

Characterization Of 1d And 2d Materials With Tip-Enhanced Raman Spectroscopy, María Olivia Avilés

Electronic Thesis and Dissertation Repository

Carbon-based materials, such as 1D single-walled carbon nanotubes (SWCNT) or 2D graphene, are promising materials for a variety of applications in energy storage, biosensors, and medical imaging applications. Similarly, beyond graphene, 2D transition metal dichalcogenides (TDM) that can have either a metallic or semiconducting character have gained interest for potential applications in electronics and photonics. Specifically, metallic TMDs such as vanadium disulfide (VS₂) show potential applications in optoelectronics and lithium-ion batteries. On the other hand, semiconducting TDMs like tungsten disulfide (WS₂) show a direct band gap, making them interesting for photovoltaic applications, transistors, or photodetectors. The …

Design And Characterization Of A Miniaturized Spectrometer For Wearable Applications, Tyler Richard Westover

Theses and Dissertations

As individual health monitors continue to become more widely adopted in helping individuals make informed decisions, new technologies need to be developed to obtain more biometric data. Spectroscopy is a well-known tool to gain biological information. Traditionally spectrometers are large and expensive making personal or wearable health monitors difficult. Here we present the development and characterization of a miniaturized short wavelength infrared spectrometer for wearable applications. We present a carbon nanotube parallel hole collimator can effectively select a narrow set of allowed angles of light to be separated by a linear variable filter and detected at a photodiode array making …

Fabrication And Characterization Of Carbon Nanotube Metal Matrix Composites For Use In Photovoltaic Gridline Applications, Cayla M. Nelson

Nanoscience and Microsystems ETDs

Performance reliability is crucial for photovoltaic (PV) cells in both terrestrial and space-based applications. Electrical efficiency losses over time are heavily impacted by electrical losses due to microcracks within the cell structure and metallization failure. Mechanical stresses and thermal cycling of the device can lead to fracture of the current-carrying metal (Ag) lines on the surface of the device, significantly reducing output power. Incorporating carbon nanotubes (CNTs) into PV metal lines as a reinforcement, forming a CNT/Ag metal matrix composite (MMC), enhances the electrical and mechanical performance of the device. In this work the influence of CNT/Ag MMCs were explored …

Patterned And Infiltrated Vertically Aligned Carbon Nanotube Ultra-Black Materials, Kevin Laughlin

Theses and Dissertations

Ultra-black materials reflect less than 1% of incident light, and are used in a wide variety of applications from low signal detector systems, to jewelry. The darkest ultra-black materials are made with vertically aligned carbon nanotubes (VACNTs). One downside to these VACNT based ultra-black material, is they are extremely fragile, and the types of surfaces they can be grown on is limited. Here I created a strengthened ultra-black material that can withstand light handling and drying from water exposure, and can be transferred to other substrates while remaining ultra-black. I also present theoretical models with supporting data on how to …

Electrical And Mechanical Properties Of Polymer Nanocomposites, Nuwansiri N.K. Getangama

Electronic Thesis and Dissertation Repository

This thesis consists of three projects concerning the electrical and mechanical properties of polymer nanocomposites. We study the effect of nanoscale filler particles on the polymer dynamics at different length and time scales. In the first study, poly(ethylene oxide) (PEO)-multiwalled carbon nanotubes (MWCNT) nanocomposites with a MWCNT concentration ranging from 0 to 5 wt\% were prepared by both melt-mixing and twin-screw extrusion. Their electrical properties were studied over a wide range of frequency and temperature using a dielectric spectrometer. A percolation transition is observed at which the electrical conductivity of the nanocomposites increases by several orders of magnitude. The percolation …

Robust Design Methodologies Under Performance Variations For More Than Moore Technologies: Cnfets & 3dics, Satya Keerthi Vendra

Dissertations and Theses

Various emerging technologies have shown great potential of supplementing silicon transistors as Moore's law slows down. One such disruptive technology, Carbon Nanotube Field Effect Transistors (CNFET), among others, promises increased speed and integration with reduced power consumption. However, due to a limited controllability over the Carbon Nano-tube(CNT) growth process, CNFETs show large variations in their performance and behavior. It is therefore difficult to predict and model their behavior while design suggestions are also challenging. CNT variations are important for a realistic delay modelling. Due to the presence of CNT-specific variations, conventional CMOS evaluation techniques cannot be used for CNFETs.

This …

A Core–Shell Au@Tio2 And Multi-Walled Carbon Nanotube-Based Sensor For The Electroanalytical Determination Of H2o2 In Human Blood Serum And Saliva, Ayman Ali Saeed, Mohammed Nooredeen Abbas, Waheed Fathi El-Hawary, Yousry Moustafa Issa, Baljit Singh

Articles

A hydrogen peroxide (H2O2) sensor was developed based on core–shell gold@ titanium dioxide nanoparticles and multi-walled carbon nanotubes modified glassy carbon electrode (Au@TiO2/MWCNTs/GCE). Core–shell Au@TiO2 material was prepared and characterized using a scanning electron microscopy and energy dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, X-ray diffraction (XRD) and Zeta-potential analyzer. The proposed sensor (Au@TiO2/MWCNTs/GCE) was investigated electrochemically using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The analytical performance of the sensor was evaluated towards H2O2 using differential pulse voltammetry (DPV). The proposed sensor exhibited excellent stability and sensitivity with a linear concentration …

A Highly Conductive, Flexible, And 3d-Printable Carbon Nanotube-Elastomer Ink For Additive Bio-Manufacturing, Andy Shar, Phillip Glass, Daeha Joung Ph.D.

Undergraduate Research Posters

The synthesis of a highly conductive, flexible, 3D-printable, and biocompatible ink has been of great interest in the field of bio-based additive manufacturing. Various applications include ultra-sensitive, microscale tactile sensors, patient-customizable scaffolds for cardiac and nerve tissue regeneration, and flexible electrocardiogram (ECG) electrodes. Here, a novel elastomeric carbon nanocomposite is presented consisting of amino-functionalized carbon nanotubes (CNT-NH₂) homogenously dispersed in a one-part room-temperature vulcanizing (RTV) silicone matrix. The use of acetone as a swelling solvent aids in electrical percolation through the elastomer matrix. CNT-NH₂ ratios can be tuned to fit various needs; higher tensile strength is favored …

Molecular Modeling Of High-Performance Thermoset Polymer Matrix Composites For Aerospace Applications, Prathamesh P. Deshpande

Dissertations, Master's Theses and Master's Reports

The global efforts from major space agencies to transport humans to Mars will require a novel lightweight and ultra-high strength material for the spacecraft structure. Three decades of research with the carbon nanotubes (CNTs) have proved that the material can be an ideal candidate for the composite reinforcement if certain shortcomings are overcome. Also, the rapid development of the polymer resin industry has introduced a wide range of high-performance resins that show high compatibility with the graphitic surface of the CNTs. This research explores the computational design of these materials and evaluates their efficacy as the next generation of aerospace …

Moisture Dependence Of Electrical Resistivity In Under-Percolated Cement-Based Composites With Multi-Walled Carbon Nanotubes, Geuntae Hong, Seongcheol Choi, Doo-Yeol Yoo, Taekgeun Oh, Yooseob Song, Jung Heum Yeon

Civil Engineering Faculty Publications and Presentations

Cement-based piezoresistive composites have attracted significant attention as smart construction materials for embedding self-sensing capability in concrete infrastructure. Although a number of studies have been conducted using multi-walled carbon nanotubes (MWCNTs) as a functional filler for self-sensing cement-based composites, studies addressing the influence of the internal moisture state on the electrical properties are relatively scant. In this study, we aim to experimentally investigate the effect of internal moisture state on the electrical resistivity of cement-based composites containing MWCNTs as an electrically conductive medium to raise a need for calibration of self-sensing data considering the internal moisture state. To this end, …