Digital Commons Network^™

Automated Generation And Integration Of Autosar Ecu Configurations, Usha Sreeram

Electronic Theses and Dissertations

Automotive Open System Architecture (AUTOSAR) is a system-level standard that is formed by the worldwide partnership of the automotive manufacturers and suppliers who are working together to develop a standardized Electrical and Electronic(E/E) framework and architecture for automobiles. The AUTOSAR methodology has two main activities: system configuration and the Electronic Control Unit (ECU) configuration. The system configuration is the mapping of the software components to the ECUs based on the system requirements. The ECU configuration process is an important part of the ECU software integration and generation. ECU specific information is extracted from the system configuration description and all the …

Nonautomata, Jeremy Haynes

Electronic Theses and Dissertations

Abstract

The purpose of this paper is a formal examination of the exhibition titled “NonAutomata” by Jeremy Haynes, as partial fulfillment of requirements for a Master of Fine Arts degree from Stephen F. Austin State University.

By examining the psychological influences within my artwork, I question the assumption that we are all just organic machines built with the same parts although we are all assembled and wired differently to perform specific tasks in society. I recall my personal experiences and how these influence my reactions to everyday life. While using clay with traditional and non-traditional processes, I have been …

The Effects Of Vehicle Automation Level And Warning Type On Responses To Vehicle Hacking, Wyatt D. Mcmanus

Psychology Theses & Dissertations

Modern surface transportation vehicles often include different levels of automation. Higher automation levels have the potential to impact surface transportation in unforeseen ways. For example, connected vehicles with higher levels of automation are at a higher risk for hacking attempts, because automated driving assistance systems often rely on on board sensors and internet connectivity. As the automation level of vehicle control rises, it is necessary to examine the effect of different levels of automation have on the driver-vehicle interactions. In addition, auditory warnings have been shown to effectively attract a driver’s attention while performing a driving task, which is often …

The Effect Of Differing Degrees Of Automation And Reliability On Simulated Luggage Screening Performance, Molly M. Liechty

Psychology Theses & Dissertations

The present work examined the effects of two types of decision support systems in a simulated luggage screening task: An input aid and an output aid. An input aid supports an operator’s information gathering. An output aid supports decision making and action selection. A Time-Accuracy Function (TAF) analysis was applied to isolate processing time from performance asymptote, which conventional performance measures such as sensitivity and response time do not distinguish one from the other. Sixty participants performed a luggage screening task unaided (manual condition), with the assistance of an input aid (spatial aid), and with the assistance of an output …

Design And Evaluation Of Convolutional Networks For Video Analysis Of Bee Traffic, Prateek Vats

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Colony Collapse Disorder (CCD) has been a major threat to bee colonies around the world which affects vital human food crop pollination. The decline in bee population can have tragic consequences, for humans as well as the bees and the ecosystem. Bee health has been a cause of urgent concern for farmers and scientists around the world for at least a decade but a specific cause for the phenomenon has yet to be conclusively identified.

A normal hive inspection can be very disruptive for the bee colony, as the hive needs to be disassembled to visually assess hive health from …

Automation Of State Climate Office Processes & Products: Developing Efficient Approaches For Data Dissemination, Michael Shoop

Electronic Theses and Dissertations

State Climate Offices (SCO’s) in the United States are critical conduits for improving weather and climate data in local communities. Two states do not have a state-recognized SCO: Tennessee and Massachusetts. Efforts are underway at East Tennessee State University to develop the Tennessee Climate Office (TCO). Currently, climate services and products are severely lacking across Tennessee. This thesis provides an improved methodology for an existing TCO product and outlines the development of a new product using Python scripting. Daily storm reports within the monthly climate report are automated and a Weather Forecasts Hazard Index (WFHI) web application is developed. Both …

A Microfluidics-Based Cross-Flow Filtration Platform For Rapid Processing Of Amphiphilic Biomarkers From Blood, Kiersten D. Lenz

Biomedical Engineering ETDs

Early and accurate detection of bacterial infections can help save lives, prevent the spread of disease, and decrease the overuse of antibiotics. Our team at the Los Alamos National Laboratory has developed novel assays to detect bacterial biomarkers from patient blood at the point-of-care in order to facilitate a universal diagnostic platform. However, these biomarkers are amphiphilic in nature, and this biochemical property causes them to be sequestered by high-density and low-density lipoproteins (HDL and LDL) in the host’s blood. Extraction of the bacterial biomarkers from the lipoprotein complexes is thereby required for the development and deployment of a diagnostic …

The Effects Of Automation Transparency And Reliability On Task Shedding And Operator Trust, William Everett Lehman

Psychology Theses & Dissertations

Because automation use is common in many domains, understanding how to design it to optimize human-automation system performance is vital. Well-calibrated trust ensures good performance when using imperfect automation. Two factors that may jointly affect trust calibration are automation transparency and perceived reliability. Transparency information that explains automated processes and analyses to the operator may help the operator choose appropriate times to shed task control to automation. Because operator trust is positively correlated with automation use, behaviors such as task shedding to automation can indicate the presence of trust. This study used a 2 (reliability; between) × 3 (transparency; within) …

The Application Of Paperless Processes To Improve Data Management Within Small To Medium Businesses, Kelley D. Nemec

Honors College Theses

Businesses are creating new value by implementing new processes built on modern tools. Small businesses, though, with much fewer resources than the most significant competitors, cannot follow the same path. How can these businesses use standard, widely available tools and techniques to improve their processes and create value within their business? This paper discusses the implementation of paperless processes using the electronic form technology, Google Forms, within the Honors Program at Georgia Southern University over two years. Action research methods were used to guide the research and implementation of new processes. Through the introduction of cloud-based electronic forms and process …

Motor Control Systems Analysis, Design, And Optimization Strategies For A Lightweight Excavation Robot, Austin Jerold Crawford

Graduate Theses and Dissertations

This thesis entails motor control system analysis, design, and optimization for the University of Arkansas NASA Robotic Mining Competition robot. The open-loop system is to be modeled and simulated in order to achieve a desired rapid, yet smooth response to a change in input. The initial goal of this work is to find a repeatable, generalized step-by-step process that can be used to tune the gains of a PID controller for multiple different operating points. Then, sensors are to be modeled onto the robot within a feedback loop to develop an error signal and to make the control system self-corrective …

Design And Creation Of A System Of Machines To Automate Quality Control Processes For Atms, Miguel D. Pedrozo

Undergraduate Distinction Papers

This project is based around the quality control processes used to test ATMs. Currently, a person will manually run through each function of the ATM in order to find modes of failure. As the case with all repetitive jobs, it is an unwanted task and is simple enough to be automated. The new solution I propose allows for a system of devices to operate the functions of the ATM autonomously with little to no human intervention. Additionally, this solution is more reliable when diagnosing a problem as it will eventually communicate with the ATM directly in a closed loop system …

Automation In Graphic Design, Robert M. Doehling

Honors College Theses

Advances in technology have had dramatic impacts throughout history on a myriad of industries outside of the technology industry itself. These changes are showcased through a brief examination of the changes within the graphic design industry since the recorded birth of the graphic. With the advent of popularized artificial intelligence seen in the modern day, many are predicting the end of graphic design. Through an analysis of current automated design products within the consumer market and a dive into the research alongside design automation professional Peter O’Donovan, it is evident that the role of the graphic designer will most likely …

Whose Drive Is It Anyway? Using Multiple Sequential Drives To Establish Patterns Of Learned Trust, Error Cost, And Non-Active Trust Repair While Considering Daytime And Nighttime Differences As A Proxy For Difficulty, Scott Mishler

Psychology Theses & Dissertations

Semi-autonomous driving is a complex task domain with a broad range of problems to consider. The human operator’s role in semi-autonomous driving is crucial because safety and performance depends on how the operator interacts with the system. Drive difficulty has not been extensively studied in automated driving systems and thus is not well understood. Additionally, few studies have studied trust development, decline, or repair over multiple drives for automated driving systems. The goal of this study was to test the effect of perceived driving difficulty on human trust in the automation and how trust is dynamically learned, reduced due to …

Development And Initial Evaluation Of A Reinforced Cue Detection Model To Assess Situation Awareness In Commercial Aircraft Cockpits, Aysen K. Taylor

Engineering Management & Systems Engineering Theses & Dissertations

Commercial transport aircraft of today vary greatly from early aircraft with regards to how the aircraft are controlled and the feedback provided from the machine to the human operator. Over time, as avionics systems became more automated, pilots had less direct control over their aircraft. Much research exists in the literature about automation issues, and several major accidents over the last twenty years spurred interest about how to maintain the benefits of automation while improving the overall human-machine interaction as the pilot is considered the last line of defense.

An important reason for maintaining or even improving overall pilot situation …

Recipe For Disaster, Zac Travis

MFA Thesis Exhibit Catalogs

Today’s rapid advances in algorithmic processes are creating and generating predictions through common applications, including speech recognition, natural language (text) generation, search engine prediction, social media personalization, and product recommendations. These algorithmic processes rapidly sort through streams of computational calculations and personal digital footprints to predict, make decisions, translate, and attempt to mimic human cognitive function as closely as possible. This is known as machine learning.

The project Recipe for Disaster was developed by exploring automation in technology, specifically through the use of machine learning and recurrent neural networks. These algorithmic models feed on large amounts of data as a …

Examination Of Adoption Theory On The Devops Practice Of Continuous Delivery, Andrew John Anderson

Walden Dissertations and Doctoral Studies

Many organizations have difficulty adopting advanced software development practices. Some software development project managers in large organizations are not aligned with the relationship between performance expectancy, effort expectancy, social influence, and facilitating conditions, as moderated by experience, with intent to adopt the DevOps practice of continuous delivery. The purpose of this study was to examine the statistical relationships between the independent variables—performance expectancy, effort expectancy, social influence, and facilitating conditions, as moderated by experience—and the dependent variable of behavioral intent to adopt a continuous delivery system. Venkatesh, Morris, Davis, and Davis's unified theory of acceptance and use of technology provided …

Robotic Automation Of A Cnc Machine, Jace Hovey

Honors Undergraduate Theses

Robotic automation of CNC machines is becoming more popular as robot technology advances and becomes more readily available. While some CNC machines can run autonomously with part catchers, vertical milling centers require an external entity to keep the machine running. Collaborative and Industrial robots are the two main selections for automating a vertical CNC milling machine. We investigate specifically which robot type is most effective for machine tending a Haas VF2 vertical milling center. To do this a cell floor plan, risk assessment, overall equipment effectiveness evaluation, and a total cost analysis are performed to compare robots. With this results …

Mechanical Design Automation: A Case Study On Plastic Extrusion Die Tooling, Allen Prasad Varghese

Theses

The Skills Gap in Mechanical Engineering (ME) Design has been widening with the increasing number of baby boomers retiring (Silver Tsunami) and the lack of a new generation to acquire, practice and perfect their knowledge base. This growing problem has been addressed with several initiatives focused on attracting and retaining young talent; however, these types of initiatives may not be timely for this new group to be trained by an established Subject Matter Expert (SME) group. Automated Engineering Design provides a potential pathway to address not only the Skills Gap but also the transfer of information from SMEs to a …

Artificial Intelligence In Wastewater Treatment Facilities: Implementing Practical New Technologies For The End User, Jordan Spano

Williams Honors College, Honors Research Projects

Design phase operator input can prove useful; however, it is not essential in every application, as Akron’s treatment plant implemented AI to increase treatment capacity without design-phase operator input. They implemented a system flight simulator, a few hours training, and have communicated with the designer to make system tweaks as needed. In larger applications, the owner may benefit greatly by incorporating design input from operational staff. Those representing a municipality as a project owner for a treatment plant upgrade should always maintain an active role in the design of smart water infrastructure. They must keep the operators in mind when …

Disrupting Complex Systems With Emerging Technologies: A Study On United States Airport Operations, Emily J. Grone

Honors Theses and Capstones

The number of United States domestic commercial flight passengers are growing every year, which means the number of people checking-in, dropping off their bags, and going through TSA within airports is equally growing. With the increasing number of passengers and aging airports, there are several areas of pain points within airports where passengers hit a bottleneck due to the current systems that airports have in place. There are three main areas that we are going to reference. First the check-in process, where customers have to get their tickets, input identification information, and check-in for their flight. Second, baggage-drop off, where …