Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 30 of 41

Full-Text Articles in Entire DC Network

Fast Scene Based Nonuniformity Correction With Minimal Temporal Latency, Christopher A. Rice Sep 2006

Fast Scene Based Nonuniformity Correction With Minimal Temporal Latency, Christopher A. Rice

Theses and Dissertations

The focus of this research was to derive a new algorithm for correction of gain nonuniformities in LIDAR focal plane arrays using as few frames as possible. Because of the current low production rate of LIDAR focal plane arrays there is a natural tendency for extreme nonuniformities to exist on a pixel by pixel basis as the manufacturing technique has not yet been perfected. Generally, nonuniformity correction techniques require a large number of frames and/or have obscure requirements on the translational shifts in the input image frames. This thesis presents a solution for finding multiplicative nonuniformities that exist in a …


Investigation Of Ultracold Rubidium Atoms In A Pulsed Far Off Resonance Trap, Minarni Minarni Jul 2006

Investigation Of Ultracold Rubidium Atoms In A Pulsed Far Off Resonance Trap, Minarni Minarni

Physics Theses & Dissertations

This dissertation reports on the design, construction, and investigation of a pulsed optical dipole force trap which uses laser light to confine ultracold rubidium (Rb) atoms. Because the laser frequency is detuned far from the atomic resonance frequency, the optical dipole force trap is also called a "far-off-resonance trap" (FORT). The use of pulsed laser light to create an optical trap may find application in expanding the number of atomic species which can be confined. The experiments reported here are principally aimed, however, at understanding the physics of pulsed FORT dynamics in anticipation of using the free electron laser (FEL) …


Characterizing A Co-Flow Nozzle For Use In A Filtered Rayleigh Scattering System, David S. Miceli Jun 2006

Characterizing A Co-Flow Nozzle For Use In A Filtered Rayleigh Scattering System, David S. Miceli

Theses and Dissertations

Research was conducted on the flow field exiting a co-annular flow nozzle for use in filtered Rayleigh scattering flow visualizations. More specifically, the flow visualizations were of the flow field exiting a coflow nozzle and illuminated by a tunable, nominal 4.2 watt narrow line width Argon laser operating at 514.5nm. ND:YAG lasers are typically used in this application, but some of the properties of a tunable Argon laser make it an attractive alternative. Before generating flow visualizations, the coflow nozzle was characterized both experimentally and computationally. Due to a flow asymmetry in the outer annulus flow field, the nozzle was …


An Analysis Of Nonlinear Elastic Deformations For A Homogeneous Beam At Varying Tip Loads And Pitch Angles, Robert J. Mcgraw Jun 2006

An Analysis Of Nonlinear Elastic Deformations For A Homogeneous Beam At Varying Tip Loads And Pitch Angles, Robert J. Mcgraw

Theses and Dissertations

The Princeton beam experiments of 1975 were performed in hopes of producing viable data for beam nonlinear elastic deformation models in hopes of improving helicopter main beam designs. The recorded data, specifically for homogeneous beams of 7075 aluminum, have been referenced as a baseline for the past thirty years to validate numerous computer models and theories in an effort to build beams capable of withstanding aeroelastic, static, and dynamic loading. The purpose of this study is to improve upon the data recorded in 1975 using newer technologies including a laser distance meter, digital inclinometer, and three-dimensional traverse to test X-axis, …


Performance-Metric Driven Atmospheric Compensation For Robust Free-Space Laser Communication, Peter N. Crabtree Apr 2006

Performance-Metric Driven Atmospheric Compensation For Robust Free-Space Laser Communication, Peter N. Crabtree

Theses and Dissertations

The effect of turbulence on laser propagation is a significant challenge to current electro-optical systems. While atmospheric compensation techniques in space object imaging and high-energy laser weapons have been thoroughly investigated, optimizing these techniques for Laser Communication (LaserCom) has not been examined to the same degree. Average Strehl ratio is the typical design metric for current atmospheric compensation systems. However, fade probability is the relevant metric for LaserCom. This difference motivated the investigation into metric-driven atmospheric compensation. Metric-based tracking techniques for fade mitigation is the first major focus of this research. In a moderate range air-to-air scenario, focal plane spot …


Comparison Of Climatological Optical Turbulence Profiles To Standard, Statistical And Numerical Models Using Heleeos, Liesebet E. Gravley Mar 2006

Comparison Of Climatological Optical Turbulence Profiles To Standard, Statistical And Numerical Models Using Heleeos, Liesebet E. Gravley

Theses and Dissertations

Optical turbulence within earth’s atmosphere plays a significant role in electromagnetic radiation propagation from a high energy laser. The index of refraction structure constant, Cn2, characterizes turbulent spatial fluctuations due to temperature gradients. These changes in the index of refraction affect the intensity of the laser wave front on its intended target. It is important to characterize this parameter throughout the atmosphere, the boundary layer and above, for its applications regarding the Airborne Laser (ABL) and the Advanced Tactical Laser (ATL). There are several ways to obtain values of optical turbulence, including standard and statistical models, physically-based numerical models, and …


Characteristics Of Two-Dimensional Triangular And Three-Dimensional Face-Centered-Cubic Photonic Crystals, Jeffery D. Clark Mar 2006

Characteristics Of Two-Dimensional Triangular And Three-Dimensional Face-Centered-Cubic Photonic Crystals, Jeffery D. Clark

Theses and Dissertations

The fabrication of photonic crystals (PhC) with photonic band gaps (PBG) in the visible range is a difficult task due to the small structural feature sizes of the PhC. The particular type of PhC examined is a two-dimensional (2-D) triangular structure with a PBG designed for visible wavelengths with applications in visible integrated photonic systems. This work examines the processes involved and viability of fabricating 2-D triangular PhC's by a variety of techniques: focused ion beam, electron lithography and holographic photo-polymerization/lithography. The design of the PhC was based on a program created to display gap maps for triangular structures. The …


Polar Phase Screens: A Comparison With Other Methods Of Random Phase Screen Generation, Rebecca J. Eckert Mar 2006

Polar Phase Screens: A Comparison With Other Methods Of Random Phase Screen Generation, Rebecca J. Eckert

Theses and Dissertations

This research provides the first organized comparison of random phase screen generation methods, including logarithmic polar Fourier series, using structure functions. Random phase screens are essential elements of simulating light propagation through turbulent media. In order to be effective, they must accurately reflect theory and be practical to implement. This research explains and evaluates three methods of generating random phase screens: using a Fourier series upon a polar frequency grid with logarithmic spacing; using the fast Fourier transform, with its Cartesian frequency grid; and using Zernike polynomials. It provides a comparison of the Polar Fourier Series technique with the two …


Control Demonstration Of A Thin Deformable In-Plane Actuated Mirror, Gina A. Peterson Mar 2006

Control Demonstration Of A Thin Deformable In-Plane Actuated Mirror, Gina A. Peterson

Theses and Dissertations

Current imaging satellites are limited in resolution and coverage area by the aperture size of their primary optical mirror. To get a large optical mirror into space, current launch weight and size restrictions must be overcome. Membrane-like optical mirrors can overcome these restrictions with their very lightweight and flexible properties. However, thin, deformable membrane mirrors are very susceptible to the space environment and require active control for surface stabilization and shaping. The primary goal of this research is to demonstrate that an in-plane actuated membrane-like deformable optical mirror can be controlled to optical wavelength tolerances in a closed-loop system. Fabrication …


Active Optical Tracking With Spatial Light Modulators, Steven R. Mawhorter Mar 2006

Active Optical Tracking With Spatial Light Modulators, Steven R. Mawhorter

Theses and Dissertations

Two spatial light modulators are utilized for beam splitting, steering and tracking. Both linear and holographic phase screens are used in a demonstration of technology to allow real time tracking to communicate in a one-to-several type scenario. One SLM is used to apply a linear phase modulation to steer multiple beams onto a detector. The spots that are produced represent the targets as they move around the field of view of the central communication node. A Gerchberg-Saxton algorithm will subsequently use the detected spots as the desired pointing locations. Using this as input, the Gerchberg-Saxton algorithm yields a phase only …


Multi-Dimensional Wave Front Sensing Algorithms For Embedded Tracking And Adaptive Optics Applications, Christopher C. Wood Mar 2006

Multi-Dimensional Wave Front Sensing Algorithms For Embedded Tracking And Adaptive Optics Applications, Christopher C. Wood

Theses and Dissertations

Current tracking and adaptive optics techniques cannot compensate for fast-moving extended objects, which is important for ground-based telescopes providing space situational awareness. To fill this need, a vector-projection maximum-likelihood wave-front sensing algorithm development and testing follows for this application. A derivation and simplification of the Cramer-Rao Lower Bound for wavefront sensing using a laser guide star bounds the performance of these systems and guides implementation of a vastly optimized maximum-likelihood search algorithm. A complete analysis of the bias, mean square error, and variance of the algorithm demonstrates exceptional performance of the new sensor. A proof of concept implementation shows feasibility …


Lqg/Ltr Tilt And Tip Control For The Starfire Optical Range 3.5-Meter Telescope's Adaptive Optics System, Neil D. Paris Mar 2006

Lqg/Ltr Tilt And Tip Control For The Starfire Optical Range 3.5-Meter Telescope's Adaptive Optics System, Neil D. Paris

Theses and Dissertations

The Air Force Research Laboratory has sponsored research on the tracking control loop portion of the adaptive optics system in the Starfire Optical Range 3.5-meter telescope at Kirtland Air Force Base. The control loop includes two steering mirrors (Coarse Steering Mirror and Fine Steering Mirror) used to remove wavefront tilt and tip phase distortion from light entering the telescope. The objective of this research is to design a single Linear Quadratic Gaussian controller to control both steering mirrors in order to eliminate wavefront tilt and tip distortions induced by the earth's atmosphere, and to evaluate the stability robustness and performance …


Radiation Studies Of The Tin-Doped Microscopic Droplet Laser Plasma Light Source Specific To Euv Lithography, Chiew-Seng Koay Jan 2006

Radiation Studies Of The Tin-Doped Microscopic Droplet Laser Plasma Light Source Specific To Euv Lithography, Chiew-Seng Koay

Electronic Theses and Dissertations

Extreme ultraviolet lithography(EUVL) is being developed worldwide as the next generation technology to be inserted in ~ 2009 for the mass production of IC chips with feature sizes <35 nm. One major challenge to its implementation is the development of a 13.5 nm EUV source of radiation that meets the requirements of current roadmap designs of the source of illumination in commercial EUVL scanners. The light source must be debris-free, in a free-space environment with the imaging EUV optics that must provide sufficient, narrow spectral band EUV power to print 100 wafers/hr. To meet this need, extensive studies on emission from a laser plasma source utilizing tin-doped droplet target was conducted. Presented in this work, are the many optical techniques such as spectroscopy, radiometry, and imaging, that were employed to characterize and optimize emission from the laser plasma source State of the art EUV spectrographs were employed to observe the source's spectrum under various laser irradiation conditions. Comparing the experimental spectra to those from theory, has allowed the determination of the Sn ion stages responsible for emitting into the useful EUV bandwidth. Experimental results were compared to spectral simulations obtained using Collisional-Radiative Equilibrium (CRE) model, as well. Moreover, extensive measurements surveying source emission from 2 nm to 30 nm, which is the region of the electromagnetic spectrum defined as EUV, was accomplished. Absolutely calibrated metrology was employed with the Flying Circus instrument from which the source's conversion efficiency (CE)--from laser to the useful EUV energy--was characterized under various laser irradiation conditions. Hydrodynamic simulations of the plasma expansion together with the CRE model predicted the condition at which optimum conversion could be attained. The condition was demonstrated experimentally, with the highest CE to be slightly above 2%, which is the highest value among all EUV source contenders. In addition to laser intensity, the CE was found to depend on the laser wavelength. For better understanding, this observation is compared to results from simulations. Through a novel approach in imaging, the size of the plasma was characterized by recording images of the plasma within a narrow band, around 13.5 nm. The size, approximately 100 ìm, is safely within the etendue limit set by the optical elements in the EUV scanner. Finally, the notion of irradiating the target with multiple laser beams was explored for the possibility of improving the source's conversion efficiency.


Polarimetry Of Random Fields, Jeremy Ellis Jan 2006

Polarimetry Of Random Fields, Jeremy Ellis

Electronic Theses and Dissertations

On temporal, spatial and spectral scales which are small enough, all fields are fully polarized. In the optical regime, however, instantaneous fields can rarely be examined, and, instead, only average quantities are accessible. The study of polarimetry is concerned with both the description of electromagnetic fields and the characterization of media a field has interacted with. The polarimetric information is conventionally presented in terms of second order field correlations which are averaged over the ensemble of field realizations. Motivated by the deficiencies of classical polarimetry in dealing with specific practical situations, this dissertation expands the traditional polarimetric approaches to include …


Synchronization In Advanced Optical Communications, Inwoong Kim Jan 2006

Synchronization In Advanced Optical Communications, Inwoong Kim

Electronic Theses and Dissertations

The objective of this dissertation is to generate high power ultrashort optical pulses from an all-semiconductor mode-locked laser system. The limitations of semiconductor optical amplifier in high energy, ultrashort pulse amplification are reviewed. A method to overcome the fundamental limit of small stored energy inside semiconductor optical amplifier called "eXtreme Chirped Pulse Amplification (X-CPA)" is proposed and studied theoretically and experimentally. The key benefits of the concept of X-CPA are addressed. Based on theoretical and experimental study, an all-semiconductor mode-locked X-CPA system consisting of a mode-locked master oscillator, an optical pulse pre-stretcher, a semiconductor optical amplifier (SOA) pulse picker, an …


Integrated Inp Photonic Switches, Daniel May-Arrioja Jan 2006

Integrated Inp Photonic Switches, Daniel May-Arrioja

Electronic Theses and Dissertations

Photonic switches are becoming key components in advanced optical networks because of the large variety of applications that they can perform. One of the key advantages of photonic switches is that they redirect or convert light without having to make any optical to electronic conversions and vice versa, thus allowing networking functions to be lowered into the optical layer. InP-based switches are particularly attractive because of their small size, low electrical power consumption, and compatibility with integration of laser sources, photo-detectors, and electronic components. In this dissertation the development of integrated InP photonic switches using an area-selective zinc diffusion process …


Experimental Techniques For Nonlinear Material Characterization: A Nonlinear Spectrometer Using A White-Light Continuum Z-Scan, Mihaela Balu Jan 2006

Experimental Techniques For Nonlinear Material Characterization: A Nonlinear Spectrometer Using A White-Light Continuum Z-Scan, Mihaela Balu

Electronic Theses and Dissertations

The main goal of this dissertation is to introduce and demonstrate a new method for the rapid determination of the nonlinear absorption spectra and the dispersion of the nonlinear refraction of optical materials in the visible and near IR spectral regions. However, conventional methods like, white-light continuum pump-probe and Z-scan techniques were used to measure the peak 2PA cross-sections for a number of commercially available photoinitiators. In the new method mentioned above, a high energy, broadband femtosecond white-light continuum is used to replace the single wavelength source conventionally used in a Z-scan experiment. In a Z-scan experiment, the transmittance of …


Polarization-Independent Liquid Crystal Devices, Yi-Hsin Lin Jan 2006

Polarization-Independent Liquid Crystal Devices, Yi-Hsin Lin

Electronic Theses and Dissertations

Liquid crystal (LC) devices can be operated as amplitude modulators and phase modulators. LC amplitude modulation is commonly used in liquid crystal display (LCD) while phase-only modulation is useful for laser beam steering, tunable grating, prism, lens, and other photonic devices. Most LC devices are polarization dependent and require at least one polarizer. As a result, the optical efficiency is low. To enhance display brightness, a power hungry backlight has to be used leading to a high power consumption and short battery life. In a LC phase modulator, the polarization dependent property complicates the laser beam steering system. It is …


On The Use Of Variable Coherence In Inverse Scattering Problems, Erwan Baleine Jan 2006

On The Use Of Variable Coherence In Inverse Scattering Problems, Erwan Baleine

Electronic Theses and Dissertations

Even though most of the properties of optical fields, such as wavelength, polarization, wavefront curvature or angular spectrum, have been commonly manipulated in a variety of remote sensing procedures, controlling the degree of coherence of light did not find wide applications until recently. Since the emergence of optical coherence tomography, a growing number of scattering techniques have relied on temporal coherence gating which provides efficient target selectivity in a way achieved only by bulky short pulse measurements. The spatial counterpart of temporal coherence, however, has barely been exploited in sensing applications. This dissertation examines, in different scattering regimes, a variety …


Ultrashort, High Power, And Ultralow Noise Mode-Locked Optical Pulse Generation Using Quantum-Dot Semiconductor Lasers, Myoung-Taek Choi Jan 2006

Ultrashort, High Power, And Ultralow Noise Mode-Locked Optical Pulse Generation Using Quantum-Dot Semiconductor Lasers, Myoung-Taek Choi

Electronic Theses and Dissertations

This dissertation explores various aspects and potential of optical pulse generation based on active, passive, and hybrid mode-locked quantum dot semiconductor lasers with target applications such as optical interconnect and high speed signal processing. Design guidelines are developed for the single mode operation with suppressed reflection from waveguide discontinuities. The device fabrication procedure is explained, followed by characteristics of FP laser, SOA, and monolithic two-section devices. Short pulse generation from an external cavity mode-locked QD two-section diode laser is studied. High quality, sub-picosecond (960 fs), high peak power (1.2 W) pulse trains are obtained. The sign and magnitude of pulse …


Design And Optimization Of Nano-Optical Elements By Coupling Fabrication To Optical Behavior, Raymond Rumpf Jan 2006

Design And Optimization Of Nano-Optical Elements By Coupling Fabrication To Optical Behavior, Raymond Rumpf

Electronic Theses and Dissertations

Photonic crystals and nanophotonics have received a great deal of attention over the last decade, largely due to improved numerical modeling and advances in fabrication technologies. To this day, fabrication and optical behavior remain decoupled during the design phase and numerous assumptions are made about "perfect" geometry. As research moves from theory to real devices, predicting device behavior based on realistic geometry becomes critical. In this dissertation, a set of numerical tools was developed to model micro and nano fabrication processes. They were combined with equally capable tools to model optical performance of the simulated structures. Using these tools, it …


Probing Random Media With Singular Waves, Chaim Schwartz Jan 2006

Probing Random Media With Singular Waves, Chaim Schwartz

Electronic Theses and Dissertations

In recent years a resurgence of interest in wave singularities (of which optical vortices are a prominent example), light angular momentum and the relations between them has occurred. Many applications in various areas of linear and non-linear optics have been based on studying effects related to angular momentum and optical vortices. This dissertation examines the use of such wave singularities for studying the light propagation in highly inhomogeneous media and the relationship to angular momentum transfer. Angular momentum carried by light can be, in many cases, divided in two terms. The first one relates to the polarization of light and …


External Cavity Multiwavelength Semiconductor Mode-Locked Laser Gain Dynamics, Luis Archundia-Berra Jan 2006

External Cavity Multiwavelength Semiconductor Mode-Locked Laser Gain Dynamics, Luis Archundia-Berra

Electronic Theses and Dissertations

External cavity semiconductor mode-locked lasers can produce pulses of a few picoseconds. The pulses from these lasers are inherently chirped with a predominant linear chirp component that can be compensated resulting in sub-picosecond pulses. External cavity semiconductor mode-locked lasers can be configured as multiwavelength pulse sources and are good candidates for time and wavelength division multiplexing applications. The gain medium in external cavity semiconductor mode-locked lasers is a semiconductor optical amplifier (SOA), and passive and hybrid mode-locked operation are achieved by the introduction of a saturable absorber (SA) in the laser cavity. Pump-probe techniques were used to measure the intracavity …


High Birefringence And Low Viscosity Liquid Crystals, Chien-Hui Wen Jan 2006

High Birefringence And Low Viscosity Liquid Crystals, Chien-Hui Wen

Electronic Theses and Dissertations

In this dissertation, liquid crystal (LC) materials and devices are investigated in order to meet the challenges for photonics and displays applications. We have studied three kinds of liquid crystal materials: positive dielectric anisotropic LCs, negative dielectric anisotropic LCs, and dual- frequency LCs. For the positive dielectric anisotropic LCs, we have developed some high birefringence isothiocyanato tolane LC compounds with birefringence ~0.4, and super high birefringence isothiocyanato biphenyl-bistolane LC compounds with birefringence as high as ~0.7. Moreover, we have studied the photostability of several high birefringence LC compounds, mixtures, and LC alignment layers in order to determine the failure mechanism …


Antenna-Coupled Infrared And Millimeter-Wave Detectors: Fabrication, Measurement And Optimization, Charles Middleton Jan 2006

Antenna-Coupled Infrared And Millimeter-Wave Detectors: Fabrication, Measurement And Optimization, Charles Middleton

Electronic Theses and Dissertations

Antenna-coupled detectors provide uncooled, cost-effective solutions for infrared and millimeter-wave imaging. This work describes the design, fabrication, measurement, and optimization of several types of antenna-coupled detectors for LWIR (8 - 12 µm) and 94 GHz radiation. Two types of millimeter-wave antenna-coupled detectors were fabricated and tested: a slot antenna coupled to a bolometer, and a patch antenna coupled to a SiC Schottky diode. Electromagnetic modeling of the antennas helped guide the design of antennas with better impedance matching to the detectors. Schottky diodes are discussed as detectors for millimeter-wave and infrared radiation, with the goal of increasing the cutoff frequency …


All-Semiconductor High Power Mode-Locked Laser System, Kyungbum Kim Jan 2006

All-Semiconductor High Power Mode-Locked Laser System, Kyungbum Kim

Electronic Theses and Dissertations

All-optical synchronization and its application in advanced optical communications have been investigated in this dissertation. Dynamics of all-optical timing synchronization (clock recovery) using multi-section gain-coupled distributed-feedback (MS-GC DFB) lasers are discussed. A record speed of 180-GHz timing synchronization has been demonstrated using this device. An all-optical carrier synchronization (phase and polarization recovery) scheme from PSK (phase shift keying) data is proposed and demonstrated for the first time. As an application of all-optical synchronization, the characterization of advanced modulation formats using a linear optical sampling technique was studied. The full characterization of 10-Gb/s RZ-BPSK (return-to-zero binary PSK) data has been demonstrated. …


Fast Response Liquid Crystal Devices, Yung-Hsun Wu Jan 2006

Fast Response Liquid Crystal Devices, Yung-Hsun Wu

Electronic Theses and Dissertations

Liquid crystal (LC) has been widely used for displays, spatial light modulators, variable optical attenuators (VOAs) and other tunable photonic devices. The response time of these devices is mainly determined by the employed liquid crystal material. How to obtain fast response for the LC devices is a fundamentally important and technically challenging task. In this dissertation, we investigate several methods to improve liquid crystal response time, for examples, using dual-frequency liquid crystals, polymer stabilized liquid crystals, and sheared polymer network liquid crystals. We discover a new class of material, denoted as sheared polymer network liquid crystal (SPNLC) which exhibits a …


Direct Nonlinear Optics Measurements Of Raman Gain In Bulk Glasses And Estimates Of Fiber Performance, Robert Stegeman Jan 2006

Direct Nonlinear Optics Measurements Of Raman Gain In Bulk Glasses And Estimates Of Fiber Performance, Robert Stegeman

Electronic Theses and Dissertations

The need for more bandwidth in communications has stimulated the search for new fiberizable materials with properties superior to fused silica which is the current state-of-the-art. One of the key properties is Raman gain by which a pump beam amplifies a signal beam of longer wavelength. An apparatus capable of directly measuring the spectral dependence and absolute magnitude of the material Raman gain coefficient using nonlinear optics techniques has been built. Using radiation from a 1064 nm Nd:YAG laser as the pump and from a tunable Optical Parametric Generator and Amplifier as the signal, the Raman gain spectrum was measured …


Integrated Wavelength Stabilization Of Broad Area Semiconductor Lasers Using A Dual Grating Reflector, Jason O'Daniel Jan 2006

Integrated Wavelength Stabilization Of Broad Area Semiconductor Lasers Using A Dual Grating Reflector, Jason O'Daniel

Electronic Theses and Dissertations

A new fully integrated wavelength stabilization scheme based on grating-coupled surface-emitting lasers is explored. This wavelength stabilization scheme relies on two gratings. The first grating is fabricated on the p-side of the semiconductor laser in close proximity to the laser waveguide such that it couples light out of the guided mode of the waveguide into a propagating mode in the substrate; this grating is known as the grating coupler. The second grating is fabricated on the n-side of the substrate such that for the stabilization wavelength, this second grating operates in the Littrow condition and is known as the feedback …


Propagation Effect In Inhomogeneous Media, Including Media With Light-Induced And Fixed Gratings, Chang-Ching Tsai Jan 2006

Propagation Effect In Inhomogeneous Media, Including Media With Light-Induced And Fixed Gratings, Chang-Ching Tsai

Electronic Theses and Dissertations

Optical waves propagation in various types of volume gratings, materials with constant impendence and optical fibers are studied. Instability of cross–phase modulation and of Energy transfer via GRON-type (Grating-type Orientational Nonlinearity in Liquid Crystal) Stimulated Scattering is numerically observed. Two diffractive optical elements made of volume gratings are suggested and analyzed. A transmission hologram based on the analogy with Stimulated Raman Adiabatic Passage (STIRAP) in nonlinear optics is proposed. This transmission hologram demonstrates high diffraction efficiency and low sensitivity to polarization and hologram strength. The other is a reflection hologram with two crossed-gratings. It features good angular selectivity in comparison …