Digital Commons Network^™

Cmos Design Of An 8-Bit 1ms/S Successive Approximation Register Adc, Ameya Vivekanand Ganguli

Master's Theses

Rapid evolution of integrated circuit technologies has paved a way to develop smaller and energy efficient biomedical devices which has put stringent requirements on data acquisition systems. These implantable devices are compact and have a very small footprint. Once implanted these devices need to rely on non-rechargeable batteries to sustain a life span of up to 10 years. Analog-to-digital converters (ADCs) are key components in these power limited systems. Therefore, development of ADCs with medium resolution (8-10 bits) and sampling rate (1 MHz) have been of great importance.

This thesis presents an 8-bit successive approximation register (SAR) ADC incorporating an …

Scaled Synthetic Aperture Rader Development, Jason Garvey Schray

Master's Theses

Several previous Cal Poly thesis projects involve synthetic aperture radar (SAR), automatic target recognition (ATR), and tracking. SAR data was either accessed from a publicly available database or generated using complex computer modeling software. The motivation for this dual thesis project is to design and construct a scaled SAR system to support Cal Poly radar projects. Ideally this is a low-cost, high resolution SAR architecture that produces raw range Doppler data for any desired target area. To that end, a scaled SAR system was successfully designed, built, and tested. The current SAR system, however, does not perform azimuthal compression and …

Scaled Synthetic Aperture Radar System Development, Ryan K. Green

Master's Theses

Synthetic Aperture Radar (SAR) systems generate two dimensional images of a target area using RF energy as opposed to light waves used by cameras. When cloud cover or other optical obstructions prevent camera imaging over a target area, SAR can be substituted to generate high resolution images. Linear frequency modulated signals are transmitted and received while a moving imaging platform traverses a target area to develop high resolution images through modern digital signal processing (DSP) techniques. The motivation for this joint thesis project is to design and construct a scaled SAR system to support Cal Poly radar projects. Objectives include …

Synthetic Aperture Radar: Rapid Detection Of Target Motion In Matlab, Daniel S. Kassen

Master's Theses

Synthetic Aperture Radar (SAR) has come into widespread use in several civilian and military applications. The focus of this paper is the military application of imaging point targets captured by an airborne SAR platform. Using the traditional SAR method of determining target motion by analyzing the difference between subsequent images takes a relatively large amount of processing resources. Using methods in this thesis, target motion can be estimated before even a single image is obtained, reducing the amount of time and power used by a significantly large amount. This thesis builds on work done by Brain Zaharri and David So. …

Applications Of Artificial Neural Networks To Synthetic Aperture Radar For Feature Extraction In Noisy Environments, David James Roberts

Master's Theses

It is often that images generated from Synthetic Aperture Radar (SAR) are noisy, distorted, or incomplete pictures of a target or target region. As the goal for most SAR research pertains to automatic target recognition (ATR), extensive filtering and image processing is required in order to extract the features necessary to carry out ATR. This thesis investigates the use of Artificial Neural Networks (ANNs) in order to improve upon the feature extraction process by laying the foundation for ANN SAR ATR algorithms and programs. The first technique investigated is that of an ANN edge detector designed to be invariant to …

Synthetic Aperture Radar Rapid Detection Of Range And Azimuth Velocities Implemented In Matlab, Cheuk Yu David So

Master's Theses

The Synthetic Aperture Radar (SAR) algorithm processes multiple radar returns from the target space to generate a single high-resolution image. Targets moving through the target space during the capture sequence will appear distorted on the final image. In addition, there is no velocity information that is calculated as part of the processing. The objective of this thesis is to develop techniques to determine the azimuth and range velocities of moving objects in the target space in the early stages of SAR processing. The typical SAR processing steps are Range Compressed, Range Doppler, and final image generation. The range velocity of …

Sar Map Of Gel Phantom In A 64mhz Mri Birdcage By Fiber-Optic Thermometry And Fdtd Simulation, Chirag Mukesh Patel

Master's Theses

As implantable medical devices are being used more often to treat medical problems for which pharmaceuticals don’t suffice, it is important to understand their interactions with commonly used medical modalities. The interactions between medical implants and Magnetic Resonance Imaging machines have proven to be a risk for patients with implants.

Implanted medical devices with elongated metallic components can create harmful levels of local heating in a Magnetic Resonance Imaging (MRI) environment [1]. The heating of a biological medium under MRI is monitored via the Specific Absorption Rate (SAR). SAR, defined as power absorbed per unit mass (W/kg), can be calculated …

High Resolution Simulation Of Synthetic Aperture Radar Imaging, Cindy G. Romero

Master's Theses

The goal of this Master’s thesis is to develop a more realistic simulation of Synthetic Aperture Radar (SAR) that has the ability to image detailed targets, and that can be used for Automatic Target Recognition (ATR). This thesis project is part of ongoing SAR ATR research at California Polytechnic State University (Cal Poly) sponsored by Raytheon Space & Airborne Systems and supervised by Dr. John Saghri.

SAR is a form of radar that takes advantage of the forward motion of an antenna mounted on a moving platform (such as an airplane or spacecraft) to synthetically produce the effect of a …

Synthetic Aperture Radar Imaging Simulated In Matlab, Matthew Schlutz

Master's Theses

This thesis further develops a method from ongoing thesis projects with the goal of generating images using synthetic aperture radar (SAR) simulations coded in MATLAB. The project is supervised by Dr. John Saghri and sponsored by Raytheon Space and Airborne Systems. SAR is a type of imaging radar in which the relative movement of the antenna with respect to the target is utilized. Through the simultaneous processing of the radar reflections over the movement of the antenna via the range Doppler algorithm (RDA), the superior resolution of a theoretical wider antenna, termed synthetic aperture, is obtained. The long term goal …

Target Tracking Using Various Filters In Synthetic Aperture Radar Data And Imagery, Jessica L. Kiefer

Master's Theses

This thesis explores the use and accuracy of several discrete-time image filters for the purpose of target tracking in Synthetic Aperture Radar imagery. Both extended targets and point targets are used for tracking, showing the need for different types of filters for each target type.

Monte Carlo analysis is performed on the results of the extended target filter results to determine the absolute mean-squared error between the filter prediction of the target centroid and the actual location of the target centroid. Two different filters were chosen for the extended target: Kalman and H Infinity.

Both the Kalman and H Infinity …

Three-Dimensional Target Modeling With Synthetic Aperture Radar, John R. Hupton

Master's Theses

Conventional Synthetic Aperture Radar (SAR) offers high-resolution imaging of a target region in the range and cross-range dimensions along the ground plane. Little or no data is available in the range-altitude dimension, however, and target functions and models are limited to two-dimensional images. This thesis first investigates some existing methods for the computation of target reflectivity data in the deficient elevation domain, and a new method is then proposed for three-dimensional (3-D) SAR target feature extraction.

Simulations are implemented to test the decoupled least-squares technique for high-resolution spectral estimation of target reflectivity, and the accuracy of the technique is assessed. …