Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 15 of 15
Full-Text Articles in Entire DC Network
Intercalation Of Pyrazolone-Based Oxalamide Metal Complexes Into Na-Montmorillonite For Catalytic Liquid-Phase Oxidation Of Phenol Using H2o2, Serhat Uzan, Eyüp Başaran
Intercalation Of Pyrazolone-Based Oxalamide Metal Complexes Into Na-Montmorillonite For Catalytic Liquid-Phase Oxidation Of Phenol Using H2o2, Serhat Uzan, Eyüp Başaran
Turkish Journal of Chemistry
The intercalation of pyrazolone-based oxalamide metal complexes into Na-montmorillonite (Na-MMT) for catalytic liquid-phase oxidation of phenol using H2O2 was undertaken by a flexible ligand method using metal ions including Mn(II), Zn(II), and Sn(II). First, the metal ions were exchanged with the sodium ions of Na-MMT, and then these metal ions were complexed with a new pyrazolone-based oxalamide ligand. The intercalated metal complexes were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, elemental analysis, and thermogravimetric analysis. Phenol was successfully oxidized by heterogeneous catalysts based on Mn(II), Zn(II), and Sn(II) pyrazolone-based oxalamide complexes intercalated into …
Catalytic Evaluation Of Cellulose Pyrolysis By Using Nanosized Metal Oxide Catalysts, Yusuf Osman Donar, Ali̇ Tolga Ünalan, Samed Ergenekon, Ali̇ Sinağ
Catalytic Evaluation Of Cellulose Pyrolysis By Using Nanosized Metal Oxide Catalysts, Yusuf Osman Donar, Ali̇ Tolga Ünalan, Samed Ergenekon, Ali̇ Sinağ
Turkish Journal of Chemistry
In this study, effects of TiO$_{2}$ and ZnO nanometal oxides on cellulose pyrolysis have been investigated. Both catalysts have been synthesized via hydrothermal method and characterized by using different techniques. Catalytic and catalyst-free experiments were carried out so as to identify the catalytic abilities of synthesized nanoparticles. Catalyst-free experiments were carried out at 500, 600, and 700 °C in order to determine the optimal condition for pyrolysis and it was found as 700 °C. Optimum catalyst ratio for cellulose pyrolysis was found as 5% (w/w) for both TiO$_{2}$ and ZnO catalysts. GC-MS and micro-GC analyses were conducted in order to …
The Relation Between Surface Acidity And Moo3:Al2o3 Ratio On The Ternary Mixed Oxide Catalysts For The Conversion Of Propan-2-Ol, Hani Zeidan, Ebru Erünal, Mustafa Esen Marti
The Relation Between Surface Acidity And Moo3:Al2o3 Ratio On The Ternary Mixed Oxide Catalysts For The Conversion Of Propan-2-Ol, Hani Zeidan, Ebru Erünal, Mustafa Esen Marti
Turkish Journal of Chemistry
In this study, ternary mixed oxide catalysts containing Al2O3-MoO3-MgO and Al2O3-MoO3-WO3 were prepared with a changing ratio of MoO3:Al2O3 between 0.05 and 20.00. All catalysts showed 100% selectivity towards propene during the conversion of propan-2-ol at temperatures between 220 and 400 °C. The catalysts prepared from WO3 possessed very strong acid sites, which cause higher catalytic activity than catalysts prepared from MgO. Besides, the ratio of MoO3:Al2O3 was found to be directly proportional to the conversion …
Fabrication And Characterization Of Amidoxime-Functionalized Silica Decorated Withcopper: A Catalytic Assembly For Rapid Reduction Of Dyes, Ijaz Ahmed Khan, Muhammad Inaam-Ul-Hassan, Hazrat Hussain, Syed Mujtaba Shah, Tariq Yasin
Fabrication And Characterization Of Amidoxime-Functionalized Silica Decorated Withcopper: A Catalytic Assembly For Rapid Reduction Of Dyes, Ijaz Ahmed Khan, Muhammad Inaam-Ul-Hassan, Hazrat Hussain, Syed Mujtaba Shah, Tariq Yasin
Turkish Journal of Chemistry
In this study, amidoxime-functionalized silica decorated with copper (AFS-Cu) was fabricated and tested for its catalytic application. Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction were employed to characterize its structure and morphology. The application of AFS-Cu as a catalyst for the catalytic reduction of methylene blue (MB) in aqueous media using NaBH$_{4}$ as reductant was evaluated. The ability to reuse as well as the effect of catalyst dose and pH of solution on the catalytic activity was investigated. The reduction of MB followed pseudo-first-order kinetics and the rate constant (k) was 0.6224 min$^{-1}$. …
Preparation Of Different Thin Film Catalysts By Direct Current Magnetron Sputtering Forhydrogen Generation, Gamze Bozkurt, Abdulkadi̇r Özer, Ayşe Bayrakçeken Yurtcan
Preparation Of Different Thin Film Catalysts By Direct Current Magnetron Sputtering Forhydrogen Generation, Gamze Bozkurt, Abdulkadi̇r Özer, Ayşe Bayrakçeken Yurtcan
Turkish Journal of Chemistry
In this study, thin films of Co, Ni, Pd, and Pt were prepared on Co$_{3}$O$_{4}$ support material in pellet form using the direct current (DC) magnetron sputtering method for use as catalysts for hydrogen generation from NaBH4.Characterization of the catalysts was carried out using X-ray diffraction (XRD), scanning electronic microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). According to cross-sectional SEM images, catalyst thicknesses were observed in the range of approximately 115.3-495.8 nm. The particle sizes were approximately 25.0, 21.4, 33.9, and 9.5 nm for Ni-Co$_{3}$O$_{4}$, Co-Co$_{3}$O$_{4}$, Pd-Co$_{3}$O$_{4}$, and Pt-Co$_{3}$O$_{4}$ catalysts, respectively. The increase in NaOH initial concentration provides an increase …
The Catalytic Effects Of In Situ Prepared N-Heterocyclic Carbenes From Benzimidazole Salts In Suzuki--Miyaura Cross-Coupling Reaction And Uses In Catalytic Preparation Of 1,3,5-Triphenyl-1,3,5-Triazinane-2,4,6-Trione From Phenyl Isocyanate, Ülkü Yilmaz, Hasan Küçükbay
The Catalytic Effects Of In Situ Prepared N-Heterocyclic Carbenes From Benzimidazole Salts In Suzuki--Miyaura Cross-Coupling Reaction And Uses In Catalytic Preparation Of 1,3,5-Triphenyl-1,3,5-Triazinane-2,4,6-Trione From Phenyl Isocyanate, Ülkü Yilmaz, Hasan Küçükbay
Turkish Journal of Chemistry
Many benzimidazole salts bearing a 3-phenylpropyl substituent (1a-1h) were synthesized and their structures were identified by $^{1}$H NMR, $^{13}$C NMR, and IR spectroscopic methods and elemental analysis. These N-heterocyclic carbene (NHC) precursors were used as a part of a catalytic system including Pd(OAc)$_{2}$ and the base in the Suzuki--Miyaura cross-coupling reaction under microwave irradiation. They were also used as catalysts in the cyclotrimerization of phenyl isocyanate to yield 1,3,5-triphenyl-1,3,5-triazinane-2,4,6-trione. It has been observed that benzimidazole salts made a positive contribution to both catalytic reactions as a NHC precursor.
Nanocomposite Copper Metal As An Efficient Heterogeneous Catalyst In Click Synthesis Of 1,2,3-Triazoles In Aqueous Media, Vajihe Nejadshafiee, Hossein Naeimi
Nanocomposite Copper Metal As An Efficient Heterogeneous Catalyst In Click Synthesis Of 1,2,3-Triazoles In Aqueous Media, Vajihe Nejadshafiee, Hossein Naeimi
Turkish Journal of Chemistry
Copper/periodic mesoporous organosilica (Cu/PMO) nanocomposites provided a highly active, reusable, globular, solid-phase catalyst for click chemistry. The reaction proceeds by mixing organohalides, sodium azide, alkyne, and the catalyst in an aqueous medium to afford the desired products. The cost efficiency and recyclability of the catalyst up to six runs without appreciable loss of activity and high yields of products make this procedure greener.
Ag(I) Complexes Of Benzimidazol-2-Ylidene Ligands: A Study Of Catalytic Efficiency Towards Three-Component Coupling Reactions, Rafet Kilinçarslan, Nai̇m Sadiç, Beki̇r Çeti̇nkaya
Ag(I) Complexes Of Benzimidazol-2-Ylidene Ligands: A Study Of Catalytic Efficiency Towards Three-Component Coupling Reactions, Rafet Kilinçarslan, Nai̇m Sadiç, Beki̇r Çeti̇nkaya
Turkish Journal of Chemistry
The $N$-heterocyclic carbene (NHC)--Ag(I) complexes 3a-c were synthesized from benzimidazolium chlorides (2a-c = NHC.HCl), incorporating benzyl derivatives and a 2-methoxyethyl group (a: $^{3}$N = 2,4,6-trimethylbenzyl; b: $^{3}$N = 2,3,5,6-tetramethylbenzyl; c: $^{3}$N = pentamethylbenzyl). The compounds were characterized by spectroscopic and elemental analyses. The synthesized NHC-Ag(I) complexes (3a-c) were tested as catalysts for the catalytic three-component coupling reaction of aldehyde, alkyne, and amine to propargylamines in various solvents. All complexes were active catalysts for catalytic three-component coupling reactions with good yields under neat and mild conditions (after 4 h, yields of up to 94%).
Efficient C--C Cross-Coupling Reactions By (Isatin)-Schiff Base Functionalized Magnetic Nanoparticle-Supported Cu(Ii) Acetate As A Magnetically Recoverable Catalyst, Seyedeh Simin Miri, Mehdi Khoobi, Fatemeh Ashouri, Farnaz Jafarpour, Parviz Rashidi Ranjbar, Abbas Shafiee
Efficient C--C Cross-Coupling Reactions By (Isatin)-Schiff Base Functionalized Magnetic Nanoparticle-Supported Cu(Ii) Acetate As A Magnetically Recoverable Catalyst, Seyedeh Simin Miri, Mehdi Khoobi, Fatemeh Ashouri, Farnaz Jafarpour, Parviz Rashidi Ranjbar, Abbas Shafiee
Turkish Journal of Chemistry
Copper catalysts were simply fabricated through surface modification of superparamagnetic iron nanoparticles with indoline-2,3-dione(isatin)-Schiff-base and interaction with Cu from low-cost commercially available starting materials. Catalysts were characterized using atomic absorption spectrophotometry, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, vibrating sample magnetometry, UV/Vis spectroscopy, scanning electron microscopy, and transmission electron microscopy. These catalysts showed high efficiency for phosphine-free Mizoroki--Heck and Suzuki--Miyaura cross-coupling reactions with good diversity and generality. The catalysts could be easily recovered and reused several times without a significant loss in their catalytic activity and stability.
Resorcinarene-Mono-Benzimidazolium Salts As Nhc Ligands For Suzuki--Miyaura Cross-Couplings Catalysts, Ümi̇t İşci̇, Muhi̇tti̇n Aygün, Resul Sevi̇ncek, Yunus Zorlu, Fabienne Dumoulin
Resorcinarene-Mono-Benzimidazolium Salts As Nhc Ligands For Suzuki--Miyaura Cross-Couplings Catalysts, Ümi̇t İşci̇, Muhi̇tti̇n Aygün, Resul Sevi̇ncek, Yunus Zorlu, Fabienne Dumoulin
Turkish Journal of Chemistry
Two mono-benzimidazolium salts of resorcinarene have been prepared and used as ligands in Suzuki--Miyaura cross-coupling reactions. They have been fully characterized by $^{1}$H and $^{13}$C NMR, MALDI, and FT-IR spectroscopic methods, and their structures were confirmed by X-ray diffraction analysis. These two new resorcinarene-based mono-benzimidazolium salts showed good catalytic activity for coupling reactions in DMF. The highest conversion was achieved for arylation of 4-bromotoluene using the resorcinarenyl mono-dimethylbenzimidazolium salt.
The Synthesis Of 1,3-Dialkyl-4-Methylimidazolinium Salts And Their Application In Palladium Catalyzed Heck Coupling Reactions, Murat Yi̇ği̇t, Güli̇n Bayam, Beyhan Yi̇ği̇t, İsmai̇l Özdemi̇r
The Synthesis Of 1,3-Dialkyl-4-Methylimidazolinium Salts And Their Application In Palladium Catalyzed Heck Coupling Reactions, Murat Yi̇ği̇t, Güli̇n Bayam, Beyhan Yi̇ği̇t, İsmai̇l Özdemi̇r
Turkish Journal of Chemistry
Seven novel 1,3-dialkyl-4-methylimidazolinium chloride salts 3a--g were prepared as precursors of N-heterocyclic carbenes by reacting N,N'-alkyl-1,2-diaminopropane, triethyl orthoformate, and ammonium chloride. The salts were characterized spectroscopically. The in situ prepared palladium complexes derived from the imidazolinium salts and palladium acetate were used as catalyst in Heck coupling reactions between aryl bromides and styrene. The corresponding Heck products were obtained in good yields.
Enhanced Electrocatalytic Efficiency Of C/Mwnts For Methanol Oxidation Using Ni Deposited On Mwnts, Murat Farsak, Gülfeza Kardaş
Enhanced Electrocatalytic Efficiency Of C/Mwnts For Methanol Oxidation Using Ni Deposited On Mwnts, Murat Farsak, Gülfeza Kardaş
Turkish Journal of Chemistry
The power density of direct methanol fuel cells (DMFCs) can be changed by using different anode materials. Especially porous materials are preferred for the anode. In the present study, multiwall carbon nanotubes were first injected into graphite. Then, by depositing nickel, a catalyst was prepared for use as the anode material of the DMFC. This catalyst was named Ni@MWNTs. The oxidation of methanol and some kinetic parameters were investigated in KOH solution. Cyclic voltammetry was used for the electrochemical measurements. Kinetic parameters of the methanol oxidation were determined at different temperatures, scan rates, and concentrations of methanol. The surface morphologies …
Oxidation Of Hydrocarbons With Tetra-N-Butylammonium Peroxy Monosulfate Catalyzed By \Beta-Tetrabromo-Meso-Tetrakis(4-Methoxyphenyl)- And \Beta-Tetrabromo-Meso-Tetraphenylporphyrinatomanganese(Iii), Saeed Rayati, Saeed Zakavi, Hossein Valinejad
Oxidation Of Hydrocarbons With Tetra-N-Butylammonium Peroxy Monosulfate Catalyzed By \Beta-Tetrabromo-Meso-Tetrakis(4-Methoxyphenyl)- And \Beta-Tetrabromo-Meso-Tetraphenylporphyrinatomanganese(Iii), Saeed Rayati, Saeed Zakavi, Hossein Valinejad
Turkish Journal of Chemistry
\beta-Tetrabromo-meso-tetrakis(4-methoxyphenyl)porphyrin, H_2T(4-OCH_3P)PBr_4, was synthesized and characterized by UV-Vis and ^1H NMR spectroscopy. Oxidation of alkanes and olefins with tetra-n-butylammonium peroxymonosulfate (n-Bu_4NHSO_5) was studied in the presence of MnT(4-OCH_3P)PBr_4(OAc) and MnTPPPBr_4(OAc) (TPP = meso-tetraphenylporphyrin). While significance differences were observed between the catalytic activities of the title complexes in the oxidation of alkanes, the 2 manganese porphyrins showed comparable activities in oxidation of most of the olefins used. However, the latter showed greater catalytic performance in the oxidation of the hydrocarbons. Moreover, the oxidative degradation of the former (60 %) was greater than that of the latter (45 %) in the oxidation …
Electrocatalytic Oxidation Of Ethanol On Various Metal Ad-Layer Modified Au(111) Electrodes In Alkaline Solution, Zekerya Dursun, Şükri̇ye Ulubay Karabi̇beroğlu, Buket Gelmez, Aydan Başaran
Electrocatalytic Oxidation Of Ethanol On Various Metal Ad-Layer Modified Au(111) Electrodes In Alkaline Solution, Zekerya Dursun, Şükri̇ye Ulubay Karabi̇beroğlu, Buket Gelmez, Aydan Başaran
Turkish Journal of Chemistry
Ethanol oxidation was studied on single-crystal Au(111) electrodes that were modified by platinum, palladium, and cadmium metal ad-layers. The metal ad-layer modification was carried out by the underpotential deposition process, in which controlled amounts of Pt, Pd, and Cd were electrodeposited onto the substrate as submonolayer or monolayer coverage. The activity of the metal ad-layer modified Au(111) electrodes toward ethanol oxidation was studied in alkaline media, and recorded voltammograms were compared to those of bare single crystal Au(111) and polycrystalline gold and platinum disk electrodes. In terms of the desired shift in reduction potential and increased current density, the best …
An Efficient Synthesis Of Schiff Bases Containing Benzimidazole Moiety Catalyzed By Transition Metal Nitrates, Akbar Mobinikhaledi, Naser Foroughifar, Mehdi Kalhor
An Efficient Synthesis Of Schiff Bases Containing Benzimidazole Moiety Catalyzed By Transition Metal Nitrates, Akbar Mobinikhaledi, Naser Foroughifar, Mehdi Kalhor
Turkish Journal of Chemistry
A simple and efficient method has been developed for the synthesis of some novel Schiff bases via the reaction of aromatic aldehydes with 2-aminobenzimidazole by using catalytic amount of M(NO_3)_2.xH_2O in an organic solvent at room temperature. Some advantages of this protocol are its very good yields, use of available catalysts, simple workup procedure, and short reaction times.