Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 13 of 13

Full-Text Articles in Entire DC Network

Cost Comparison Of Existing Coatings For A Hypervelocity Test Rail, Mark A. Blomer Jun 2005

Cost Comparison Of Existing Coatings For A Hypervelocity Test Rail, Mark A. Blomer

Theses and Dissertations

This study compared the relative costs, to the Department of Defense, of two different coatings used to protect a high speed test rail. Each coating was compared to the case of an uncoated rail with test conditions that caused catastrophic failure just after the test sled reached its maximum velocity. The total cost was finalized on a per test basis in order to sum cost of various expenditures that may only happen once every few tests. To compare the protective properties of each coating, various coated and uncoated samples were tested via a cylinder specimen Taylor Impact Test. Each coating's …


Modeling Application Of Hydrogen Release Compound To Effect In Situ Bioremediation Of Chlorinated Solvent-Contaminated Groundwater, Ryan C. Wood Mar 2005

Modeling Application Of Hydrogen Release Compound To Effect In Situ Bioremediation Of Chlorinated Solvent-Contaminated Groundwater, Ryan C. Wood

Theses and Dissertations

This study investigates how application of Hydrogen Release Compound (HRC) might be implemented to remediate a site contaminated with tetrachloroethene (PCE) or its daughter products, under varying site conditions. The 3-D reactive transport model RT3D was coupled with a dual-Monod biodegradation submodel to simulate the effect of the hydrogen generated by HRC on accelerating the biodegradation of dissolved chlorinated solvents. Varying site conditions and injection well configurations were investigated to determine the effect of these environmental and design conditions on overall treatment efficiency. The model was applied to data obtained at a chlorinated solvent contaminated site at Vandenberg AFB, where …


An Evaluation Of Contingency Construction Methods Using Value Focused Thinking, John E. Tyron Mar 2005

An Evaluation Of Contingency Construction Methods Using Value Focused Thinking, John E. Tyron

Theses and Dissertations

Rapid Engineering Deployable, Heavy Operational Repair Squadron, Engineer (RED HORSE) Squadrons are 400-person, self-contained, combat engineer units that provide deployable and flexible expert construction capability for the United States Air Force. To help meet Air Force mission requirements, RED HORSE units currently employ a variety of traditional and innovative construction methods. But their alternatives-focused decision analysis approach to method selection limits their decision to known alternatives and may not fully achieve all of their objectives. This research developed a generic value-focused thinking (VFT) decision analysis model to help RED HORSE evaluate and select contingency construction methods. Eight alternatives were generated …


Modeling Groundwater Flow And Contaminant Transporting Fractured Aquifers, Jason M. Bordas Mar 2005

Modeling Groundwater Flow And Contaminant Transporting Fractured Aquifers, Jason M. Bordas

Theses and Dissertations

The hybrid discrete fracture network/equivalent porous medium (DFN/EPM) model was selected for analysis and application to simulate a contaminated site in this study. The DFN/EPM was selected because it appeared to have the potential to aid decision making by remedial project managers at contaminated DoD fractured aquifer sites. This model can use data that are typically available at a site while incorporating the important processes relevant to describing contaminant transport in a fractured medium. The model was applied to simulate the operation of a pump-and-treat remedial action at a trichloroethene-contaminated fractured aquifer at Pease AFB. The model was able to …


Using Value-Focused Thinking To Evaluate The Practicality Of Ground-Source Heat Pumps At Military Installations, Jimmy J. Jeoun Mar 2005

Using Value-Focused Thinking To Evaluate The Practicality Of Ground-Source Heat Pumps At Military Installations, Jimmy J. Jeoun

Theses and Dissertations

Because of potential cost and energy savings, military decision-makers may want to consider the use of energy-efficient heating, ventilating, and air-conditioning (HVAC) systems at their installations. Ground source heat pumps (GSHPs), in particular, show great promise because of their low energy requirements and low life-cycle costs. However, there currently exists no design guidance or established criteria for HVAC selection. Consequently, military decision-makers have no basis for comparing conventional HVAC systems and GSHPs. The Value-Focused Thinking (VFT) methodology was used to create a multi-objective decision analysis model that measures the value of different HVAC systems. Consisting of five bottom-tier values and …


An Evaluation Of Wind Turbine Technology At Peterson Afb, Randy C. Combs Mar 2005

An Evaluation Of Wind Turbine Technology At Peterson Afb, Randy C. Combs

Theses and Dissertations

Wind energy technology is a viable source for attaining the emission reduction and renewable energy use goals set forth by the executive office. In accordance with Executive Orders, the Air Force must reduce greenhouse emissions and energy consumption, and expand the use of renewable energy sources within its facilities nation-wide by year 2010. This mandate requires that the Air Force look at alternative electrical production and rely more on such renewable energy resources as wind power. The specific problem addressed by this research is whether on-site wind energy generation can be more economically feasible than the conventional energy consumption at …


Estimating Performance Time For Air Force Military Construction Projects, Greg J. Hoffman Mar 2005

Estimating Performance Time For Air Force Military Construction Projects, Greg J. Hoffman

Theses and Dissertations

The prediction of construction time performance is a problem of interest to both researchers and construction industry practitioners. This research seeks to identify significant factors which may influence construction durations for Air Force Military Construction (MILCON) projects to establish a time prediction model. Data were collected for 856 MILCON projects completed between 1988 and 2004; this included both traditional facility and non-facility (e.g. airfield pavements, utilities) projects. These data were analyzed using Bromilow's time-cost (BTC) model (1969) as well as multiple linear regression. Neither model produced acceptable results for non-facility projects; however, the multiple linear regression model was found to …


An Analysis Of The Relationship Between Environmental Management And Environmental Compliance At Marine Corps Installations, Bevin J. Keen Mar 2005

An Analysis Of The Relationship Between Environmental Management And Environmental Compliance At Marine Corps Installations, Bevin J. Keen

Theses and Dissertations

Environmental compliance on military is challenging for a number of reasons, including the complexity of regulations, and the variety of operations which impact the environment. At times, public concerns and penalties stemming from environmental issues has infringed upon the United States Marine Corps' (USMC) ability to use all installation resources without restriction. This thesis examines which facets of environmental management are closely associated with high levels of compliance. Five variables of interest: Total Compliance, Total Management, Audit Management, Policy Management, and Training Management were isolated from 1998-2004 USMC environmental audit data, and subjected to statistical analysis. Through the examination of …


Usable Design Of Civil Engineer Information Systems, Gunther Kastenholz Mar 2005

Usable Design Of Civil Engineer Information Systems, Gunther Kastenholz

Theses and Dissertations

This research used a case study methodology where one instrument used to collect data was a heuristic usability inspection method. Data was collected from a literature review of pertinent Civil Engineer information system design documents, and conclusions drawn about the existing level of specification of usability engineering principles. The heuristic usability inspection method was used to validate the conclusions drawn through inspection of an information system representative of other Civil Engineer information systems, the Automated Civil Engineer System Personnel Readiness module.


An Investigation Into Palladium-Catalyzed Reduction Of Perchlorate In Water, Eric G. Barney Mar 2005

An Investigation Into Palladium-Catalyzed Reduction Of Perchlorate In Water, Eric G. Barney

Theses and Dissertations

In this study, application of a catalytic reactor to facilitate chemical reduction of perchlorate was investigated. Palladium-coated pellets were used as the catalyst, and formic acid was used as the reductant. Reactor performance was evaluated under a variety of operating conditions (influent pH, reductant concentration, residence time). Very little perchlorate reduction was observed under any operating condition. At best, approximately 8% perchlorate reduction was observed. This small reduction efficiency is clearly not sufficient for environmental treatment applications. Perchlorate strongly adsorbed to the catalyst at low pH (3 - 3.3). At higher pH (4 - 10), little adsorption was observed. This …


Validation Of An Innovative Groundwater Contaminant Flux Measurement Method, Seh J. Kim Mar 2005

Validation Of An Innovative Groundwater Contaminant Flux Measurement Method, Seh J. Kim

Theses and Dissertations

The ability to measure groundwater contaminant flux is increasingly being recognized as crucial in order to prioritize contaminated site cleanups, estimate the efficiency of remediation technologies, measure rates of natural attenuation, and apply proper source terms to model groundwater contaminant transport. An innovative mass flux measurement method using horizontal flow treatment wells (HFTWs) was developed recently to compensate for the disadvantages of other flux measurement methods that are being used. Flux measurement methods can be categorized as either point methods or integral methods. As the name suggests, point methods measure flux at a specific point or points in the subsurface. …


Removal Of Cyclohexane From A Contaminated Air Stream Using A Dense Phase Membrane Bioreactor, Michael G. Roberts Mar 2005

Removal Of Cyclohexane From A Contaminated Air Stream Using A Dense Phase Membrane Bioreactor, Michael G. Roberts

Theses and Dissertations

The purpose of this research was to determine the ability of a dense phase membrane bioreactor to remove cyclohexane, a volatile organic compound in JP-8 jet fuel, from a contaminated air stream using a biologically active film for degradation. The research answered questions regarding applications of membrane bioreactors, the ability of cyclohexane to diffuse through a dense phase membrane, growth of a viable microbial culture, and determination of the performance capabilities of the reactor. To answer these questions, a literature review was conducted and laboratory experiments were performed. Through the design, construction, and testing of the dense phase membrane bioreactor …


An Investigation Of Geobase Mission Data Set Design, Implementation, And Usage Within Air Force Civil Engineer Electrical And Utilities Work Centers, Paul C. Loeber Mar 2005

An Investigation Of Geobase Mission Data Set Design, Implementation, And Usage Within Air Force Civil Engineer Electrical And Utilities Work Centers, Paul C. Loeber

Theses and Dissertations

In 2001, the Office of the Civil Engineer, Installation and Logistics, Headquarters, United States Air Force, (ILE) identified Civil Engineer Squadrons as the central point of contact for all base-level mapping requirements/activities. In order to update mapping methods and procedures, ILE has put into place a program called GeoBase, which uses private sector Geographic Information Systems (GIS) technology as a foundation. In its current state, GeoBase uses the concept of a "Common Installation Picture (CIP)" to describe the goal of a consolidated "visual" that integrates the many layers of mapping information. The CIP visual is formed from a collection of …