Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 46
Full-Text Articles in Entire DC Network
Ddasaccident731, Hd-Aid
Ddasaccident731, Hd-Aid
Global CWD Repository
While the deminer working in the Ren. Belt (B) clearing the AP M14 in cluster 8 last section home side dir 9 o’clock a pressure applied on the top of the AP mine which caused the mine blast and it’s considered as an individual mistake.
Ddasaccident746, Hd-Aid
Ddasaccident746, Hd-Aid
Global CWD Repository
The deminer was working in SML D which contains M14 AP mines, he indicated the location of the mine then used the light rake then excavated using the heavy rake, during the excavation for the mine using the heavy rake the deminer accidentally caused a pressure on the AP mine pressure plate which caused the detonation.
Ddasaccident720, Hd-Aid
Ddasaccident720, Hd-Aid
Global CWD Repository
The deminer was working in IOE containing M14 AP mines in Section 3 in Sabha 11, he used the MD to indicate the location of the mine then used the light rake then excavated using the heavy rake, during the excavation for the mine using the heavy rake, the deminer hit accidentally the AP mine on the top which detonated the mine.
Ddasaccident714, Hd-Aid
Ddasaccident714, Hd-Aid
Global CWD Repository
I remember on the 25th of Oct. 2010 on the first part of work I cleared 3 AP mines from the first cluster as all the AT mines are cleared from the belt, then I headed to the next cluster following the team leader orders and started removing a 12 o’clock mine, when I was near its suggested location after making visual check and cleared the grass around it using the light rake I were no injuries thanks god, then the team leader came with deminer {name removed] and checked me and evacuated me walking to the ambulance which was …
Ddasaccident703, Hd-Aid
Ddasaccident703, Hd-Aid
Global CWD Repository
The deminer was working in the centre lane in the main minefield 346 and he recovered 6 M14 APs. At 12:15 hrs he started to approach AP M14 and he located one cluster then he moved to the next one, and while he was conducting visual check stage, he did not follow the proper procedure to remove the grass ,instead of using grass cutter to remove the grass he used his bared hand to pull the grass which accidentally caused the blast.
Ddasaccident693, Hd-Aid
Ddasaccident693, Hd-Aid
Global CWD Repository
While the deminer was clearing an area assigned to him by the team leader and after he recovered an AT Saci mine he entered the contaminated hazardous area trying to locate the AP M14 12 o’clock mine with out following the SOP and the proper procedure , then he stepped on a non cleared area and activated the M14 which caused a badly injured to his left foot.
Ddasaccident659, Hd-Aid
Ddasaccident659, Hd-Aid
Global CWD Repository
The incident happened while the deminer trying to investigate a signal using the heavy RAKE. The deminer was close to the mine and the distance was less than the RAKE handle 2.2 m that the area very sloppy (water course) and the deminer was looking for the missing mines.
Ddasaccident644, Hd-Aid
Ddasaccident644, Hd-Aid
Global CWD Repository
The incident happened due an individual mistake while the deminer investigating an indicated signal by the metal detector in the predicted site of the AP mine within the cluster. The deminer mis approach the mine and hit it from the top which caused the heavy RAKE to press the pressure plate and activated the mine about 2m from the deminer (the length of the RAKE handle). This the second incident with the same deminer and the same scenario.
Ddasaccident676, Hd-Aid
Ddasaccident676, Hd-Aid
Global CWD Repository
While the deminer try to investigate a signal indicated by the metal detector in an expected site of an AP M14 mine, the deminer didn’t approach the signal in the proper procedure and hit the mine with the heavy Rake on the pressure plate which activated the mine and caused the blast 200 away from the deminer
Ddasaccident597, Hd-Aid
Ddasaccident597, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as “Inadequate survey” because there seems to have been confusion about the area that required search. The secondary cause is listed as a “Management Control Inadequacy” because the failure to search the areas that were very obviously hazardous appears to have been the result of poor communication, a lack of adequate task documentation, a failure to keep MDD working records, poor understanding of Technical Survey, and other “shortcuts” that commercial demining groups may be expected to make when inadequately tasked.
Ddasaccident589, Hd-Aid
Ddasaccident589, Hd-Aid
Global CWD Repository
The team leader [the Victim] was doing a QA check on one of the Foot Track already cleared by the deminer. Out of five mines laid only one M14 AP mine has been recovered from this FT. The team leader was trying to recheck the cleared area again with the metal detector trying to find the missing mine, during his QA check he stepped on one deep buried M14 AP mine in the area which has been already checked by the deminer and Team Leader.
Ddasaccident625, Hd-Aid
Ddasaccident625, Hd-Aid
Global CWD Repository
We took the safety brief before we start working from the team leader then we entered the field, through the 1st period of work I cleared 3 AP mines from the mixed cluster (AP, AT) in Jaber 1 area, on the 2nd period at 9:11 am I cleared a 3 o’clock mine then moved to 9 o’clock mine, while searching I heard a signal and marked it then looked for it using the light rake but because it’s a hard stony area I used the heavy rake then, while progressing 15 cm from the right side I pulled the rake …
Ddasaccident645, Hd-Aid
Ddasaccident645, Hd-Aid
Global CWD Repository
When we arrived to the site the team leader gave us the morning safety brief and he warned us to be very alert about as we work on mine clusters, at 07:30 am I entered my site and the team leader came to direct me to make more space in the clearing area of missing mines, he told me to move to lane one later after finishing my work at the missing mine, lane one is a mixed mine area( has both types of mines M15 and M14 ) and asked me to clear M14 mines because the anti tank …
Ddasaccident678, Hd-Aid
Ddasaccident678, Hd-Aid
Global CWD Repository
The Deminer was trying to check signal using the heavy rake, the M14 mine was laid in a grassy solid ground full of grass root and stones, the deminer tried to drew the grass by the heavy rake, the roots of the grass push the pressure plate of the mine, that cause the mine to blast.
Ddasaccident666, Hd-Aid
Ddasaccident666, Hd-Aid
Global CWD Repository
The deminer was trying to clear the AP mine in a cluster, there was no signal due to the depth of the mines, she asked the team leader to help her in finding the signal, he tried and started to excavate until he found signal, he located and excavated over the signal until he reached 20 cm depth at that time he hit the M14 mine and caused the detonation
Ddasaccident653, Hd-Aid
Ddasaccident653, Hd-Aid
Global CWD Repository
The Deminer today was officiated as a team leader due to the absence of the team leader. He took one deminer tools and started to work himself in one of the remaining cluster in his section. While he was using the grass cutter to cut the grass in front of the base stick he hit the barely covered M14 mine by the grass cutter which caused the mine to initiate.
Ddasaccident599, Hd-Aid
Ddasaccident599, Hd-Aid
Global CWD Repository
After I recovered the main mine (AT M19) and AP mine M14 (12 o’clock direction) I started to recover AP mine M14 (3 o’clock direction) and after a while, I heard a signal, then I applied the standard procedures to investigate the signal and during my approach to the centre of the signal by the heavy rake, AP mine blew up and I did not fell down on the ground and I did not feel any type of pain, then I saw the TL coming to my site and I was just waiting for him to come, after TL reached …
Ddasaccident701, Hd-Aid
Ddasaccident701, Hd-Aid
Global CWD Repository
While the deminer was working in recovering one of the SMLs in Al Akaider 2 laid with 15 AP mines (M14) and after recovering 9 mines from the same SML and locating a signal in the predicted site for the 10th mine, the signal was strong and continuous which confused the deminer and there is no way to pin point an M14 mine at that area, the deminer start excavating the area from a depth for 40 cm using the heavy RAKE , the soil at that area hard that the deminer was using the RAKE in a hacking motion …
Ddasaccident628, Hd-Aid
Ddasaccident628, Hd-Aid
Global CWD Repository
Deminer was clearing the first 60 cm of one cluster heading toward the centre mine after he cleared the 1st 60 cm by one 1m width with no signals he moved his base stick a head to clear the next 60 cm, then he stepped on the area which considered to be cleared by the same deminer, accidently his foot went down due to the soil collapse under his foot (loose soil), the mine was in a depth of about 30 cm that when the deminer foot dived in the loosen soil he applied a pressure on the mine which …
Ddasaccident669, Hd-Aid
Ddasaccident669, Hd-Aid
Global CWD Repository
Deminer Was Clearing the first 60 cm from the centre lane on a depth of 30 cm using the heavy RAKE after he done with the light rake , deminer hit the M14 mine on a depth of 35 cm by the heavy rake which initiate the mine. [The depth appears to be an error, and should perhaps be 15cm.]
Ddasaccident642, Hd-Aid
Ddasaccident642, Hd-Aid
Global CWD Repository
While the deminer was clearing the lane from stones using the light rake he removed the stones not behind him but he conducted a violation of drill and he threw the stones to the left side of the safe lane and one of the stone hit the unknown mine 12 meters forward to the Syrian side at IOE to the contaminated area resulting mine blast.
Ddasaccident705, Hd-Aid
Ddasaccident705, Hd-Aid
Global CWD Repository
The deminer was looking for a missing mine (M14) in the cluster and the metal detector indicated a very weak signal, the deminer started to investigated that signal then the mine initiated that the deminer wasn’t following the proper procedure to approach the mine
Ddasaccident675, Hd-Aid
Ddasaccident675, Hd-Aid
Global CWD Repository
Narrative: While the deminer was trying to investigate a signal using the heavy RAKE and after he pinpointed it , and finished with the light RAKE the deminer hit the non visible AP mine (M14) by the heavy RAKE on the pressure plate which initiated the mine 2.2 metres away from the deminer.
Ddasaccident623, Hd-Aid
Ddasaccident623, Hd-Aid
Global CWD Repository
The incident caused by individual mistake while the deminer using the heavy RAKE in a hacking motion not as the proper procedure the Raking motion, and most of the mines in the area are surfaces mines that they can be recovered just with the usage of the light RAKE even if that will cost the deminer more sweat but it will still safer.
Ddasaccident604, Hd-Aid
Ddasaccident604, Hd-Aid
Global CWD Repository
While the deminer try to investigate a signal in lane 15 (12 O’clock mine) he didn’t approached the mine in the proper procedure which caused the deminer to hit the mine from the top of the pressure plate and initiate the mine 2.2 m away from the deminer (the distance of the heavy RAKE).
Ddasaccident690, Hd-Aid
Ddasaccident690, Hd-Aid
Global CWD Repository
Today afternoon one mine blast at Al Kaider 4, Team 5 (female deminer team) at 1550 hrs, deminer [the Victim] received the first aid treatment by the medic onsite, a superficial wound (4 to 6 mm) X 2 in her Lt. upper side of the arm, and no any other injuries noticed. Deminer evacuated to KAUH where she received cleaning and dressing of the wounds, X-ray done to clear no any fragmentations in the Arm, deminer received Anti Tetanus and Antibiotics and discharged from the hospital at 1710hrs, No sick leave given by KAUH doctors. Deminer advised to reach the …
Ddasaccident682, Hd-Aid
Ddasaccident682, Hd-Aid
Global CWD Repository
At 07:25 am the 21st of June 2009 while am working on 9 o’clock mine in section 4 Sabha 8, I was following all the procedures in the manual clearing and after I finished the first box I used the light rake first and when it was not responding to the hard ground I turned to the heavy rake to release the upper layer of the sand and grass, I pulled using the heavy rake then the accident happened suddenly while am working.
Ddasaccident610, Hd-Aid
Ddasaccident610, Hd-Aid
Global CWD Repository
In the morning before we start working the team leader gave us the safety brief and work instructions then I started searching for missing mines in section 3 Sabha 8, I removed a 12 and 3 o’clock mines then started working on a 9 o’clock mine I found a squirrel house near the mine I’m working on and found 2 stones on the right and left of the squirrel house, I used the light rake to expose the stones and then used the heavy rake to move the soil and remove the stones I went more than 15 cm depth …
Ddasaccident706, Hd-Aid
Ddasaccident706, Hd-Aid
Global CWD Repository
While the deminer try to recover one missing AP mine (M14) assigned for him by the team leader after grapping all the visible APs in the cluster and the central AT, the mine blasted 2.2 metres away from the deminer while searching the area with the heavy RAKE after pinpointing a signal using the metal detector.
Ddasaccident683, Hd-Aid
Ddasaccident683, Hd-Aid
Global CWD Repository
While the deminer try to recover one missing AP mine (M14) assigned for him by the team leader after grabbing all the visible APs in the cluster and the central AT the mine blasted 2.2 metres away from the deminer while searching the area with the heavy RAKE after pinpointing a signal using the metal detector.