Digital Commons Network^™

Light Level Does Not Alter Ethylene Sensitivity In Radish Or Pea, Joseph F. Romagnano, Bruce Bugbee

Plants, Soils, and Climate Faculty Publications

Ethylene accumulation occurs in many plant growth environments. In some instances, low photosynthetic photon flux (PPF) is also a stress factor. Ethylene helps regulate the shade-avoidance mechanism and synthesis rates can be altered by light. We thus hypothesized that ethylene sensitivity in whole plants may be altered in low light. Radish (Raphanus sativus) and pea (Pisum sativum) plants were selected as models due to their rapid growth, use in previous studies and difference in growth habit. We first characterized radish and pea sensitivity to ethylene. Radish vegetation was less sensitive to ethylene than pea vegetation. Pea reproductive yield was highly …

Real-Time Image Analysis Of Living Cellular-Biology Measurements Of Intelligent Chemistry, J.C. Solinsky, Scott E. Budge, P.D. Majors, B. Rex

Electrical and Computer Engineering Faculty Publications

This paper reports on the Pacific Northwest National Laboratory (PNNL) DOE Initiative in Image Science and Technology (ISAT) research, which is developing algorithms and software tool sets for remote sensing and biological applications. In particular, the PNNL ISAT work is applying these research results to the automated analysis of real-time cellular biology imagery to assist the biologist in determining the correct data collection region for the current state of a conglomerate of living cells in three-dimensional motion. The real-time computation of the typical 120 MB/sec multi-spectral data sets is executed in a Field Programmable Gate Array (FPGA) technology, which has …

Quantifying The Surface Geometry Of Titanium Implant Material By Different Methods Of Analysis, Clara Pimienta, Rashad Tawashi

Cells and Materials

Biomaterial implant manufacturers have used rough surfaces to ensure better biocompatibility, less rejection and better adaptation of implants in the body. Proper characterization of biological interactions and biocompatibility of biomaterials requires a thorough understanding of surface complexity. Surface roughness has often been shown to be important in influencing biological reactions with the surface. Previous communications from our laboratory have described a dynamic active vision system (MVS camera) capable of measuring three-dimensional coordinates of titanium implant material surfaces. Fractal analysis, due to its straightforward relationship to texture, is used to characterize the degree of irregularity of a surface and is expressed …

Image Analysis And The Effect Of Molecular Orientation On Degrading Lactide Polymer Films, K. J. L. Burg, M. Laberge, D. L. Powers, S. W. Shalaby

Cells and Materials

Absorbable polylactide films were studied in order to observe the effect of orientation on the resulting hydrolytic degradation pattern. Two types of polylactide films with two levels of molecular orientation were studied, during a nine month exposure to a phosphate buffered solution at 37°C. The films were sectioned and quantified as to void area, birefringence area, and intensity of birefringence using a microscope and an image analysis software package. The results, obtained using an analysis of variance, showed that the orientation played a significant role in the degradation pattern of the polylactide films, either decreasing or causing no change in …

Image Analysis Of Primary Bone-Derived Cells On Different Polystyrene Surfaces, R. M. Shelton, G. Landini

Cells and Materials

The aim of the present study was to examine whether two different cell populations could be discerned using image analysis of a variety of morphological parameters on bacteriological and tissue culture polystyrene surfaces. Rat periosteal and osteoblast cultures were established on both polystyrene petri dishes and examined using phase contrast microscopy after one and two weeks before capturing digital images which were stored on a personal computer. The digital images were processed to identify the cell margins or perimeter, from which seven different morphological parameters were calculated using a program developed (by GL) for both the cell populations on the …

A Quantitative Method Of Measuring Cell-Substrate Adhesion Areas, R. G. Richards, G. Rh Owen, B. A. Rahn, I. Ap Gwynn

Cells and Materials

Variability in measurements of the 'cell adhesion strength' of fibroblasts to substrates using mechanical disruption techniques causes difficulty in determining precisely the position, in the cytoskeleton-focal adhesion-matrix -substrate interface, where failure has occurred. In the present study, a quantitative in vitro procedure for measuring the total area and percentage of fibroblast adhesion to biomaterials, using the scanning electron microscope (SEM), is described. The amount of adhesion ofL929 and Balb/c3T3 fibroblasts to discs of stainless steel, commercially pure titanium, and polyethylene terepthalate (Thermanox) was quantified. Cells were fixed, stained with heavy metals, dehydrated and embedded in resin. The resin blocks were …

A Composite Biomaterial: Poly 2 (Hydropoxyethyl) Methacrylate / Alkaline Phosphatase Initiates Mineralization In Vitro, R. Filmon, D. Chappard, J. P. Monthéard, M. F. Baslé

Cells and Materials

Bone substitutes are nowadays largely used in orthopedic surgery but they lack osteoinductive properties. Poly (2-hydroxyethyl methacrylate) (pHEMA) has numerous biomedical applications. Alkaline phosphatase (AlkP), an ectoenzyme elaborated by osteoblasts, initiates bone mineralization by hydrolyzing organic phosphates before calcium-phosphorus deposition. We have immobilized AlkP in pHEMA in a copolymerization technic. Histochemical study revealed that AlkP has retained its biological activity . Image analysis of sections using a tessellation method showed a lognormal distribution of the area of tessels around AlkP particles thus confirming an homogeneous distribution of the enzyme in the polymer. Pellets of pHEMA and pHEMA + AlkP were …

Mgo·1.5al2o3 Spinel Grain Growth And Microstructure Characterization By Scanning Electron Microscopy And Digital Image Analysis, G. Bonifazi, E. Proverbio

Scanning Microscopy

The microstructure of sintered polycrystalline MgO·1.5Al₂O₃ ceramic is strongly affected by the sintering conditions due to the precipitation of α-alumina at a temperature lower than about 1400°C. Consequently, the mechanical properties, depending on grain size distribution, are greatly influenced. Three different microstructures were obtained by a two step sintering process adopting an intermediate sintering temperature of 1050°C, 1100°C and 1300°C respectively, and a final sintering temperature of 1500°C. Comparable samples obtained directly by firing at 1500°C were used. Digital image analysis (DIA) carried out on scanning electron microscope (SEM) images was performed in order to better describe …

Relationship Between The Starch Granule Structure And The Textural Properties Of Heat-Induced Surimi Gels, V. Verrez-Bagnis, B. Bouchet, D. J. Gallant

Food Structure

Starch, used as a textural additive in heat-induced surimi gel, influences the rigidity of the protein gel matrix and hence the gel strength according to its botanical characteristics. The present study focuses on the correlations existing between the textural properties of heatind uced surimi gels obtained by physical measurements and the characteristics of different commercial starches. The gelatinization temperature of starch was closely related to the expressible moisture, work to fracture, and elongation. Behaviour of starchy components during thermal processing and its relationship to fish protein gel matrix were studied by light and electron microscopy. These studies showed differences in …

Changes In The Microstructure Of A Comminuted Meat System During Heating, Peter A. Koolmees, Gerrit Wijngaards, Monique H.G. Tersteeg, Jan G. Van Logtestijn

Food Structure

As part of a series of experiments on heating of a comminuted meat system , image analyses were conducted to quantify microstructural changes that could be visualized by light microscopy. Three different batches of comminuted meat were investigated. Two batches (A and B) were prepared without polyphosphate; one of these (B) was deliberately overchopped. One batch containing 0. I% polyphosphate was prepared (C). All batches were heated at I I different temperatures ranging from 40 to 115 °C. The microstructure of the three types of meat batte rs at the end of the com minu tion process differed. These types …

Present Developments In Image Analysis, Peter Smart, Xiaoling Leng

Scanning Microscopy

The paper discusses novel methods of analysing oriented textures, explains some of the problems which had to be overcome to make these methods work, and indicates where future developments might be expected. This has required improvements in the methods of intensity gradient analysis, the development of large filter methods for mapping features defined in terms of their texture, and the introduction of ideas from the theory of regionalised variables.

The Effect Of Varying Environmental Conditions On Phytolith Morphometries In Two Species Of Grass (Bouteloua Curtipendula And Panicum Virgatum), T. B. Ball, J. D. Brotherson

Scanning Microscopy

Solid deposits of SiO₂ (phytoliths) accumulate in many plants in specific intracellular and extracellular locations. Phytoliths have morphological characteristics unique to some taxa and therefore have taxonomic significance. Phytoliths persist and maintain their morphological integrity long after a plant has died, thus becoming a microfossil of the plant that produced them. Development of phytolith sytematics for microfossil phytoliths has traditionally followed a typological approach based on simple verbal descriptions of shape. A new method for use in phytolith sytematics is the morphometric approach which employs computer-based Image Analysis Systems to make quantified measurements of morphological parameters (size, shape, texture, …

Quantitative Imaging Ion Microscopy: A Short Review, G. A. Valaskovic, G. H. Morrison

Scanning Microscopy

A short review of recent efforts being made in the quantification of images in ion microscopy is given. Special aspects of instrumentation, detection and acquisition, which are unique to direct imaging secondary ion mass spectrometry, are discussed in relation to the successful application of traditional empirical quantification schemes. Application of such quantification schemes requires proper sample preparation, standardization, analysis, and quite often, special techniques in image processing and the correlation of ion microscopy with other microscopies. Quantification within this technique is a difficult goal which can only be realized if the analyst pays strict attention to every step of the …

Relating Spectral Observations Of The Agricultural Landscape To Crop Yield, Craig L. Wiegand, Arthur J. Richardson

Food Structure

Remote sensing and microscopy share several common concerns including wavelength and sensor selection, signal processing, and image analysis. For crop yield assessments, multispectral observations are acquired photographically, videographically, or with opticalmechanical scanners from aircraft and spacecraft. Sensors are chosen at wavelengths of high atmospheric transmission and maximum contrast between the soil background and the vegetation growing out of it. Vegetation indices have been developed that maximize the information about the photosynthetic size of the vegetation in the landscape and, hence, about crop stresses and yield . Three such indices that reduce the multispectral observations to a single numerical index are …

Some Applications Of Image Analysis To Materials Science, François Grillon

Scanning Microscopy

We have presented four applications of Image Analysis to material science. The first one is on a yarn composite SiC where we want to know the relative proportion of matrix, fibers, porosity and the size of the fibers. The results are used to estimate mechanical properties of the composite.

The second one is to measure the residual porosity after a laser shock on powder metallurgy steel. The knowledge of the depth of the affected zone is necessary to optimise the laser treatment.

The third one uses Fourier transformation to analyse plastic deformation on grains. Values are obtained from Fourier transform …

Processing Multi-Spectral Scanning Electron Microscopy Images For Quantitative Microfabric Analysis, N. K. Tovey, D. L. Dent, W. M. Corbett, D. H. Krinsley

Scanning Microscopy

Multi-spectral image analysis is a powerful method to characterise quantitatively the mineralogy and microfabric of soils, sediments, and other particulate materials. Backscattered scanning electron microscope (SEM) images of polished, resin-impregnated samples are grouped with the corresponding X-ray elemental maps using classification methods commonly used in remote sensing. However, the resulting mineral-segmented images require processing to render them suitable for quantification. In the past, this has been done subjectively and interactively, but the new objective methods described in this paper largely eliminate this subjectivity. An intensity gradient magnitude image of the original backscattered electron image is used as the basis of …

Morphological Filtering And Granulometric Analysis On Scanning Electron Micrographs: Applications In Materials Science, Murielle Prod'homme, Michel Coster, Liliane Chermant, Jean-Louis Chermant

Scanning Microscopy

For many applications, scanning electron microscopy (SEM) images reflect the granular texture of analysed objects. So it is important to characterise the morphology of this texture and also to filter these images. Because the size of the texture is the main criterion to be studied, we have focused our paper on granulometric analysis.

We present basic parameters, morphological filtering and granulometry for Rⁿ•R functions and their properties with local knowledge and anamorphosis.

Some applications in the domain of materials science illustrate these methods and present their suitable possibilities.

Image Analysis To Determine Intramuscular Fat In Muscle, T. Ishii, R. G. Cassens, K. K. Scheller, S. C. Arp, D. M. Schaefer

Food Structure

The area of intramuscular fat in Holstein steer longissimus was determined using an image analyzing system. Slaughter weights of 500, 636 and 773 kg differed (p < 0.05) for intramuscular fat area, marbling score, and ether extractable lipid . Repeated measurements of intramuscular fat area in a given section showed high accuracy . However, comparing two sections from the same sample, there was often a large difference in fat content between the sections. Fat content determined by the imaging system was correlated significantl y with marbling score (r = 0.49) and ether extractable lipid (r = 0.34). Sampling is critical, and in order to obtain a high correlation several samples would be required from each muscle.

Characterization Of The Pore Structure Of Starch Based Food Materials, Z. Hicsasmaz, J. T. Clayton

Food Structure

Macroscopic pore structure parameters (bulk density, true density and porosity) and microscopic pore structure parameters (percentage closed pore volume and pore size distribution) for a highly expanded type (Wonder White Sandwich Bread) and a relatively compact type (Chessmen Butter Cookies) starch based food material were determined and their pore structures were compared. Bulk density determined by solid displacement and true density determined by pycnometry yielded porosity measurement s o f 0.9 for bread and 0.6 for cookies. Percentage closed pore volume calculated by comparing the true density of porous samples of bread and cookies with the true density of !heir …

Preparation And Characterization Of Some Particulate Materials In The Aluminum Industry, A. Csordás-Tóth, B. Szikora, J. Kürthy-Komlósy, I. Tassy

Scanning Microscopy

Preparation and characterization techniques for the following particulate materials are reviewed: micromineralogical samples of bauxite, alumina and its trihydroxide, as well as sedimentary and respirable particles. Scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDS) and image analysis were used to characterize the microminerals of bauxite. Comparisons were made among micromineralogical samples with various grain size fractions and the degree of weathering could be quantified. Programs were developed for characterization of the sandy and floury types of aluminum trihydroxide and alumina. We have used backscattered electron SEM images to characterize the size and shape of various aluminum trihydroxides. Comparison could …

The Study Of The Surface Geometry Of Renal Stone Fragments After Shock Wave And Ultrasound Disintegration, Roch Thibert, Rashad Tawashi

Scanning Microscopy

Computerized image analysis was used for characterizing the irregular boundaries of calcium oxalate stone fragments resulting from shock wave and ultrasound disintegration. The complexity of the contour of the fragments was determined to evaluate the surface roughness of the rugged profile of the samples. Crack propagation on the crystal surface of the mineral phase was studied using fractal geometry. A significant difference was observed in the boundary variation of the calcium oxalate stone fragments treated by shock wave and ultrasound. Crack propagation in the mineral phase crystal was found to depend on the method of fragmentation used. There is also …

Microscopic Measurement Of Apple Bruise, N. K. Kim, Y. C. Hung

Food Structure

Microstructural differences between unbruised and bruised apple tissues were evaluated. Cell connections appeared to be looser in bruised tissue than in unbruised tissue. Bruised tissue exhibited more empty regions which are not occupied by cells than unbruised tissue. Empty reg ions in unbruised and bruised tissues were about 0.7 and 2.4 per mm2, respectively, comprising 0.7% and 2.7% of the respective total volume. Stereology is a body of mathematical methods relating three-dimensional parameters defining a structure to two- dimensional measurements. Two methods based on a stereological principle were also used to quantify the fraction of total volume occupied by cells. …

Bone Ingrowth Into Porous Coated Canine Total Hip Replacements. Quantification By Backscattered Scanning Electron Microscopy And Image Analysis, Murali Jasty, Charles R. Bragdon, Steven Schutzer, Harry Rubash, Teresa Haire, William H. Harris

Scanning Microscopy

Bone ingrowth into titanium fiber mesh porous-surfaced canine total hip replacement prostheses was evaluated and quantified using a computer assisted image analysis system attached to a scanning electron microscope equipped with a back scattered electron detector. Excellent contrast between the bone, the porous metal and the soft tissues resulted in the backscatter mode, allowing easy differentiation of these components in real time by the image analysis based on gray scales. By three weeks the mean (± standard deviation) amount of bone ingrowth expressed as a percentage of porous layer measured 7.2% (± 1.5%) for the acetabular components, and 3.9% (± …

Image Analysis Of The Fat Dispersion In A Comminuted Meat System, Peter A. Koolmees, Piet C. Moerman, Monique H.G. Zijderveld

Food Structure

In a series of experiments on a comminuted meat system, image analyses were conducted to quantify changes in structure as affected by polyphosphate, fat level, and chopping time and temperature. Four batches of comminuted meat were investigated which contained neck beef, pig head meat, rino, ice, salt (2%), fat at a level of either 27 or 40%, and polyphosphate at a level of either 0 or 0. 5%. Structural changes in different stages of comminution coincided with a shift in size distribution, shape factor, density and area percentage of fat particles. The density of the protein matrix (matrix defined as …

Use Of Image Analysis To Predict Milling Extraction Rates Of Wheats, A. D. Evers, R. P. Withey

Food Structure

Image analysis of grain morphological characteristics was examined as a possible means of predicting extraction rates of a wide variety of wheat types.

Two elevations of grain were examined and measured for the top view whole grains were used, while for the lateral view grains were sagittally bisected in the plane of the crease. Extraction rate was assessed on laboratory mills and expressed as flour yield.

Milling extraction rate correlated with one shape factor with a coefficient of 0.78. Inclusion of a second factor in a stepwise regression increased the correlation coefficient to 0.925.

No satisfactory predictor of extraction rate …

Bovine Aorta Endothelial Cell Incubation With Interleukin 2: Morphological Changes Correlate With Enhanced Vascular Permeability, Corazon D. Bucana, Joann Trial, Audrey C. Papp, Kenneth K. Wu

Scanning Microscopy

Interleukin 2 induced alterations in the morphology of bovine aortic endothelial cells in vitro. The changes observed in confluent cultures of bovine aortic endothelial cells included retraction and elongation of eel ls leading to enlarged gaps between cells quantified by image analysis. Purified IL-2 (1 U/ml medium) increased the gaps between endothelial cells 3-4-fold compared with control cultures. The effect was transient, since the cells reverted to their original morphology 6-12 hours after the removal of lL-2. Correlative scanning electron microscopy (SEM) studies using fresh bovine aorta showed a dose-dependent alteration of the endothelial surface by IL-2 characterized by rounding …

The Capabilities Of The Microprobe Kontron Image Analysis System: Application To Mineral Beneficiation, W. Petruk

Scanning Microscopy

Image analysis is a technique for determining quantities, grain size distributions, grain orientations, intergrowths, associations, liberations and degrees of alteration of minerals or phases in naturally occurring and processed materials. It is performed by analysing images of polished or thin sections of the material under study. To obtain accurate results the images must be faithful reproductions of the material, and each mineral or phase displayed in the images must be distinct enough to be automatically discriminated and identified without operator interaction. An image analysis system that meets these requirements was developed in the Process Mineralogy Section at CANMET by interfacing …

Extraneous Background-Correction Program For Matrix Bound Multiple Point X-Ray Microanalysis, W. C. De Bruijn, M. P. C. Van Miert

Scanning Microscopy

A program is described that allows online determination of extraneous background in multiple point X-ray microanalytical matrices. The program is based upon the calculations of the extraneous background for the film (when present), the standard and the unknown by (100 sec.) point analysis. The program searches for a peak-free part of the spectrum in which the calculated value for the extraneous background is about equal to the value in this region of the spectrum (=b_e). Online the contents of this b_e-region is subtracted from an unmanipulated continuum region in the vicinity of the element present in …

Image Analysis And X-Ray Microanalysis In Cytochemistry, W. C. De Bruijn, H. K. Koerten, M. I. Cleton-Soeteman, C. J. G. Blok-Van Hoek

Scanning Microscopy

When cytochemical reaction products are homogeneously distributed within an organelle, point analyses suffice for the quantitative approach. However, quantitative analysis becomes tedious, when the elements in the reaction product are inhomogeneously distributed. Problems arise when elements from two reaction products have to be related to each other, or to endogenous cytological products (ferritin, haemosiderin, calcium, electron dense markers), either topographically or in concentration. When analyzing inhomogeneous/heteromorphical reaction product-containing organelles special attention has to be paid to measure and relate both volume and concentration. In this paper a relative simple structure (eosinophil granules) is chosen to demonstrate that the acquisition of …

A Quantitative Technique For Determining The Mass-Fractions Of Authigenic And Detrital K-Feldspar In Mineral Separates, Paul P. Hearn Jr.

Scanning Microscopy

In studies involving radiometric, isotopic, or chemical analyses of authigenic potassium feldspar (K-feldspar), suitable samples are usually available only in the form of authigenic overgrowths on detrital igneous or metamorphic grains. The analysis of these mixtures often requires a measurement of the relative proportion of each component. To address this need, a technique has been developed which utilizes backscattered-electron (BSE) and cathodoluminescence (CL) detectors together with an image analyzer to quantify the relative proportions of authigenic and detrital K-feldspar in monomineralic separates. Authigenic (low temperature) K-feldspar overgrowths are distinguished from high temperature K-feldspar cores by their lack of luminescence. Computer …