Digital Commons Network^™

Sub-Surface Corrosion Research On Rock Bolt System, Perforated Ss Sheets And Steel Sets For The Yucca Mountain Repository, Dhanesh Chandra, Jaak J.K. Daemen, Jaime Gonzalez, Raymond Keeler, Amy J. Smiecinski

Publications (YM)

The objective of the proposed investigation is to conduct corrosion research and predict the durability of rock-bolts and other underground metallic roof supports. In critical areas, it is possible to use highly corrosion resistant steels for rock bolts at Yucca Mountain (YM) repository, as the steel rock bolts, as well as other materials such as Bernold type shields for tunnels at YM site [1-4]. In addition, there is propensity for stress corrosion cracking as well as hydrogen induced cracking in rock bolts likely to occur in YM repository emplacement under drift conditions. As corrosion of these materials for underground support …

Chemical Analyses In Support Of Yucca Mountain Studies, Jeanette Daniels, Klaus J. Stetzenbach, Drew Coleman, Amy J. Smiecinski, Raymond E. Keeler

Publications (YM)

The objective of this task “Chemical Analyses in Support of Yucca Mountain Studies” is to provide the Department of Energy (DOE) with data and reports from comprehensive chemical analyses of waters sampled from the wells of the Nye County Early Warning Drilling Program (NCEWDP), the Inyo County’s Drilling Program, and the Nye county Tracer Test. In addition, this task will be used to provide other laboratory support needs as they arise within the Yucca Mountain Project. This support is provided by the Harry Reid Center for Environmental Studies (HRC) at University of Nevada, Las Vegas (UNLV), which is part of …

Environmental Effects On Corrosion Properties Of Alloy 22, K. S. Raja, L. G. Mcmillion, Shantanu A. Namjoshi, Paige Russel, Raymond E. Keeler, Amy J. Smiecinski

Publications (YM)

During the regulatory life of the Yucca Mountain High Level Nuclear Waste (HLNW) repository the primary engineered barrier that is to prevent release of radioactive material into the environment is proposed to be a Corrosion-Resistant Material (CRM) outer shell covering the Waste Package (WP) container. The current selection for the CRM is Alloy 22 (UNS N06022), a Ni-Cr-Mo-W-Fe alloy. Alloy 22 forms a defective chromic oxide passive film which results in excellent corrosion resistance; the presence of molybdenum in Alloy 22 offers corrosion resistance in reducing environments as well as oxidizing environments.

Groundwater Flow And Thermal Modeling To Support A Preferred Conceptual Model For The Large Hydraulic Gradient North Of Yucca Mountain, Phil Oberlander, Greg Pohll, Drew Coleman, Raymond E. Keeler, Amy J. Smiecinski

Publications (YM)

This task will create a two-dimensional, saturated zone, vertical cross-section model of groundwater flow and thermal transport through the large hydraulic gradient (LHG). This model is referenced herein as the thermal model. The scope of this study is limited to presenting a postulated hydrogeologic configuration of the LHG. The conceptualization will include the use of postulated hydrogeologic structures and material properties. The thermal model will be spatially limited to the area immediately upgradient and downgradient of the LHG and will not reproduce the many hydrogeologic features of the existing regional and site-scale models. The thermal model will be orientated north …

Phase Stability And Segregation In Alloy 22 Base Metal And Weldments, Jeffrey Lacombe, Shantanu A. Namjoshi, Paige Russel, Raymond E. Keeler, Amy J. Smiecinski

Publications (YM)

The current design of the waste disposal containers relies heavily on encasement in a multi-layered container, featuring a corrosion barrier of Alloy 22, a Ni-Cr-Mo-W based alloy with excellent corrosion resistance over a wide range of conditions. The fundamental concern from the perspective of the Yucca Mountain Project, however, is the inherent uncertainty in the (very) long-term stability of the base metal and welds. Should the properties of the selected materials change over the long service life of the waste packages, it is conceivable that the desired performance characteristics (such as corrosion reistance) will become compromised, leading to premature failure …

Long-Term Mechanical Behavior Of Yucca Mountain Tuffs, And Its Variability, Jaak J.K. Daemen, George Danko, Jaime Gonzalez, Amy J. Smiecinski, Raymond E. Keeler

Publications (YM)

We propose to continue the investigation of the long term strength of Yucca Mountain tuffs, with particular emphasis on tuffs from and near the emplacement horizon. We propose to also continue and expand the investigation of the spatial variability of rock strength and stiffness. An intrinsic component of this planned rock testing is the testing of rock joints. Although the emphasis is on tests aimed at determining long term strength, as part of the testing measurements of stiffness also are collected, and will be collected, reported, and analyzed.

In-Drift Natural Convection And Condensation, Stephen W. Webb, Phillip Rogers, John Del Mar, Darrell Svalstad, Cliff Howard, Ernest Hardin, Bechtel Saic Company, Llc

Publications (YM)

The Yucca Mountain repository configuration consists of waste packages stored inside of underground tunnels, or drifts. The waste packages generate heat due to radioactive decay, and moisture flows into and out of the drifts in liquid and vapor form. Heat and mass transfer within the drifts, including interaction with the surrounding rock, are potentially important processes for the performance of the repository. The present report documents models for in-drift heat and mass transfer during the post-closure period. Pre-closure, or ventilated, conditions are documented in a separate report (BSC 2004 [DIRS 169862]).

Influence Of Lithophysae Geometry And Distribution On Mechanical Properties Of Topopah Spring Tuff, Mohammad Shahidul Islam, Justin Fenton, Moses Karakouzian, Jaime Gonzalez, Amy J. Smiecinski, Raymond E. Keeler

Publications (YM)

The current Site Recommendation study for the proposed high level nuclear waste repository at Yucca Mountain locates the repository emplacement drifts approximately 81% within the lower lithophysal unit of the Topopah Springs Formation (Tptpll), 4% within the upper lithophysal unit of the Topopah Springs Formation (Tptpul), and roughly 15% within the middle, non-lithophysal unit (Tptpmn) of the same formation. A major geomechanical issue facing the Yucca Mountain Project is to understand the thermomechanical behavior of lithophysal tuff, which comprises roughly 85% of the repository host rock.

A Long Baseline Laser Strainmeter For The Exploratory Studies Facility At Yucca Mountain, Frank K. Wyatt, James N. Brune, Drew Coleman, Don Baepler, Amy J. Smiecinski

Publications (YM)

This Scientific Investigation Plan (SIP), for work under the second Department of Energy/University and Community College System of Nevada (DOE/UCCSN) Cooperative Agreement (10/01/03), DEFC28- 04RW12232, is intended to cover the laser strainmeter operation and monitoring task being conducted by the University of California, San Diego (UCSD), under the oversight of the Nevada Seismological Laboratory of the University of Nevada-Reno (NSL/UNR). UCSD has carried out the design, engineering, and installation of the east-west laser strainmeter (LSM) currently in place in the Exploratory Studies Facility (ESF) at Yucca Mountain.

Chemical Analyses For Alcove 8/Niche 3 Tracer Studies, Jeanette Daniels, Klaus J. Stetzenbach, Drew Coleman, Don Baepler, Amy J. Smiecinski

Publications (YM)

The objective of this task “Analytical Support For Tracer Studies in Alcove 8 / Niche 3” is to provide chemical analyses for the tracer studies at Alcove 8 / Niche 3 in the Exploratory Studies Facilities (ESF). This analytical support includes developing procedures for measuring tracer concentrations and then performing the tracer (and other background constituent) analyses for the water samples generated from each Alcove 8 / Niche 3 tracer test. These tracer tests are part of the Flow and Seepage Testing in Alcove 8/Niche 3 (TWP-NBS-HS-000004 REV 00). The overall goal of this study is to quantify large scale …

Ground Water Level Measurements In Selected Boreholes Near The Site Of The Proposed Repository, H. Scott Page, Klaus J. Stetzenbach, Drew Coleman, Don Baepler, Amy J. Smiecinski

Publications (YM)

The objective of this task is to provide ground water level measurements of known accuracy and precision using manual and electronic methods. The HRC will use field-proven protocols and established implementing procedures for all aspects of data collection, analysis, management, and reporting. The water level measurements produced by this program will yield quality-assured data that can be reliably used for a variety of purposes including: continued site characterization, refinement of the local potentiometric surface, inputs to the Death Valley Regional Flow Model and related hydrologic characterization, to fulfill permit conditions issued by the State of Nevada, to monitor seismically-induced ground …

Precipitation Monitoring At Yucca Mountain, Amanda Brandt, Klaus J. Stetzenbach, Drew Coleman, Donald H. Baepler, Amy J. Smiecinski

Publications (YM)

This work will be conducted under Task ORD-FY04-007, “Precipitation Monitoring at Yucca Mountain”. The objective of this task is to measure, with known accuracy, the accumulation and timing of precipitation around Yucca Mountain using tipping bucket rain gauges. The data are used as part of the overall work supporting the net infiltration modeling Analysis Model Report, Simulation of Net Infiltration for Modern and Potential Future Climates, and the Performance Confirmation Plan. This work is subject to UCCSN QA program requirements. This SIP presents an independent confirmatory study supporting previously gathered information.

Yucca Mountain Climate Technical Support Representative, Saxon E. Sharpe, Dick Reinhardt, Eric Smistad, Don Baepler, Amy J. Smiecinski

Publications (YM)

The principal investigator (PI), Saxon Sharpe, for Task ORD-FY04-012, DOE Cooperative Agreement DE-FC28-04RW12232, will serve as Yucca Mountain Climate Technical Support Representative for the Department of Energy (DOE) in a series of activities related to past, present, and future climate for the Yucca Mountain Project (YMP) climate program.

As stated in the Viability Assessment of a Repository at Yucca Mountain: “Climate and its changes over time directly affect system performance at Yucca Mountain.” Currently, information from climate studies is used in models that support the Total System Performance Assessment and Licensing Application. It is a model component of all key …