Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 11 of 11
Full-Text Articles in Entire DC Network
Rotation Invariant Bin Detection And Solid Waste Level Classification
Rotation Invariant Bin Detection And Solid Waste Level Classification
Faculty of Engineering University of Malaya
In this paper, a solid waste bin detection and waste level classification system that is rotation invariant is presented. First, possible locations and orientations of the bin are detected using Hough line detection. Then cross correlation is calculated to differentiate the true bin position and orientation from those of other similar objects. Next, features are extracted from the inside of the bin area and together with detected bin corners they are used to determine the bin's waste level. A few features are also obtained from the outside of the bin area to check whether there is rubbish littered outside the …
Effect Of High-Energy Ball Milling On The Formation And Micro Structural Features Of Carbonated Chlorapatite Nanopowders
Faculty of Engineering University of Malaya
Carbonated chlorapatite nanopowders (n-CCAp) were synthesized by mechanochemical process from calcite (CaCO3), phosphorus pentoxide (P2O5), and calcium chloride (CaCl2) as raw materials. Results demonstrated that the formation of n-CCAp was influenced strongly by the milling time. At the beginning of milling (up to 15 min), CaCO3 and CaCl2 were the dominant phases, while P2O5 disappeared entirely due to its very high deliquescent nature. With increasing the milling time to 600 min, the progressive mechanochemical reaction was completed which resulted in the formation of nanostructured carbonated chlorapatite. According to the X-ray diffraction data, crystallite size of the product decreased from 24 …
A Comparative Study Of Multi-Objective Optimal Power Flow Based On Particle Swarm, Evolutionary Programming, And Genetic Algorithm
Faculty of Engineering University of Malaya
This paper compares the performance of three population-based algorithms including particle swarm optimization (PSO), evolutionary programming (EP), and genetic algorithm (GA) to solve the multi-objective optimal power flow (OPF) problem. The unattractive characteristics of the cost-based OPF including loss, voltage profile, and emission justifies the necessity of multi-objective OPF study. This study presents the programming results of the nine essential single-objective and multi-objective functions of OPF problem. The considered objective functions include cost, active power loss, voltage stability index, and emission. The multi-objective optimizations include cost and active power loss, cost and voltage stability index, active power loss and voltage …
Fuzzy Logic-Based Approach To Investigate The Novel Uses Of Nano Suspended Lubrication In Precise Machining Of Aerospace Al Tempered Grade 6061
Faculty of Engineering University of Malaya
Temper-grade aluminum alloy Al-6061-T6 is commonly used for many engineering purposes owing to its superior mechanical properties. Due to the practical importance, machining Al-6061-T6 alloy is crucial for different applications. The development of computer numerical control (CNC) of milling machines is in progress by researchers worldwide for its noteworthy advantages. The quality of machining determines the product's appearance, function and reliability. Appropriate lubrication at the machining zone improves the tribological characteristic of Al-6061-T6 alloy, leading to higher product quality. For reasons of ambiguity during machining, the soft computing technique is chosen to predict the output. In this particular research scope, …
Cutting Force-Based Adaptive Neuro-Fuzzy Approach For Accurate Surface Roughness Prediction In End Milling Operation For Intelligent Machining
Faculty of Engineering University of Malaya
End milling is one of the most common metal removal operations encountered in industrial processes. Product quality is a critical issue as it plays a vital role in how products perform and is also a factor with great influence on manufacturing cost. Surface roughness usually serves as an indicator of product quality. During cutting, surface roughness measurement is impossible as the cutting tool is engaged with the workpiece, chip and cutting fluid. However, cutting force measurement is easier and could be used as an indirect parameter to predict surface roughness. In this research work, a correlation analysis was initially performed …
Advances In Smartphone-Based Point-Of-Care Diagnostics
Advances In Smartphone-Based Point-Of-Care Diagnostics
Faculty of Engineering University of Malaya
Point-of-care (POC) diagnostics is playing an increasingly important role in public health, environmental monitoring, and food safety analysis. Smartphones, alone or in conjunction with add-on devices, have shown great capability of data collection, analysis, display, and transmission, making them popular in POC diagnostics. In this article, the state-of-the-art advances in smartphone-based POC diagnostic technologies and their applications in the past few years are outlined, ranging from in vivo tests that use smartphone's built-in/external sensors to detect biological signals to in vitro tests that involves complicated biochemical reactions. Novel techniques are illustrated by a number of attractive examples, followed by a …
Guided Routing On Spinning Microfluidic Platforms
Guided Routing On Spinning Microfluidic Platforms
Faculty of Engineering University of Malaya
Flow directionality, valving and liquid routing in centrifugal microfluidics (Lab-on-CD) are typically controlled by applying centrifugal and Coriolis forces and have been the subject of active research interest in recent years. Determining and switching the flow direction at a T-junction is a common fluidic operation important for implementing several chemical and clinical assays for Lab-on-CDs. The present work describes a novel approach to route samples and control flow direction on a spinning disc that employs a guiding microstructure that relies on a two-stage valve comprised of an auxiliary inlet, which is a recess embedded at a T-junction, and a bent …
Investigating The Surface Tribology Of Roller-Burnished Polymer Using The Fuzzy Rule-Based Approach
Investigating The Surface Tribology Of Roller-Burnished Polymer Using The Fuzzy Rule-Based Approach
Faculty of Engineering University of Malaya
Burnishing is specified as the plastic deformation cold working process applied as surface treatment and smoothing following machining to obtain a superior surface roughness finish. The present experimental study was carried out on roller-burnished polyurethane using a roller burnishing tool. An analysis was done to investigate the effect of burnishing depth, speed, feed rate, and roller width on the surface roughness of the polymer workpiece. Roughness (R-a) prediction was achieved with a fuzzy rule-based system. The results indicate 95% accuracy between the fuzzy predicted roughness values and experimental results. Link to Full-Text Articles : www.tandfonline.com/doi/abs/10.1080/10402004.2014.962205
Modified Robust External Force Control With Disturbance Rejection With Application To Piezoelectric Actuators
Faculty of Engineering University of Malaya
In micromanipulation applications, controlling the force exerted on the object is of great importance. In such cases, any uncontrolled forces may damage the object or cause system failure. However, the presence of disturbances such as impedance uncertainties and hysteresis can strongly degrade force control performance and even lead to instability. Therefore, accurate force control when internal and external disturbances occur is a significant challenge. Conventional control methods usually have a number of restrictive conditions especially on the disturbance bounds. To rectify those issues, a modified robust disturbance rejection-based force control approach is proposed in this paper. For this purpose, an …
Effective Use Of An Edfa And Raman Pump Residual Powers Via A Bi-Edf In L-Band Multi-Wavelength Fiber Laser Generation
Faculty of Engineering University of Malaya
Residual powers of an erbium-doped fiber amplifier (EDFA) and a Raman pump are utilized effectively for pumping a 0.45 m long bismuth-based EDF (Bi-EDF) in linear-cavity L-band multi-wavelength fiber laser generation. A 7.7 km dispersion compensating fiber (DCF) operates as both Brillouin and Raman gain media and a 6.5 dBm fixed-power tunable laser source (TLS) amplified by an EDFA works as a Brillouin pump (BP). By inserting the Bi-EDF in the linear cavity and using the EDFA and the fixed Raman pump residual powers 13.6 mW and 64 mW, at wavelengths 978.8 nm and 1490.6 nm respectively, the gain spectrum …
Classification Of Eyelid Position And Eyeball Movement Using Eeg Signals
Classification Of Eyelid Position And Eyeball Movement Using Eeg Signals
Faculty of Engineering University of Malaya
Contamination of EOG activities in EEG signals remains a significant problem in designing the hybrid BCI system. Since EEG signals have always been contaminated by EOG artifacts, we employ these artifacts as inputs into our system. Therefore, in this study we utilized theEEG and its EOG artifacts as inputs to the hybrid BCI and evaluated the classification performance between thresholding and classifier techniques to determine the eyelid position and eyeball movement from EEG signals and its EOG artifacts in real-time. The EEG signals are recorded from the occipital (channel O2) and motor cortex (channel C3 and C4) on the scalp …