Digital Commons Network^™

The Role And Significance Of The Act In Teaching Semiconductor Physics In Higher And Secondary Special Educational Institutions, Ulugbek Kadyrovich Valiev

Scientific reports of Bukhara State University

Abstract. It can be shown that the following qualitative changes in the psyche fully reflect the potential of the student and students: this is an increase in self-awareness; Improvement of self-management processes, growth of intellectual abilities (mental shift, in-depth analysis of the material, identification of patterns, search for broad analogies). The process of teaching students should also be considered from the point of view of the extent to which this education is provided with elements of preparation for the independent acquisition of knowledge. At the same time, self-study is considered a key component of education. Independent reading means the formation …

Teachining Communication Technologies In Modern Foreign Languages, Gulnoz Uzokovna Komilova, Maxbuba Bozorovna Ostonova

Mental Enlightenment Scientific-Methodological Journal

In this article will discuss the most important tasks today is the use of rapidly developing information and communication technologies (ICT), a new approach to the educational process and its creation. A great example of this is the increased emphasis on ICT in teaching foreign languages. Constantly increasing demands to the level of training of modern professionals make the teachers of higher educational institutions increasingly turn to the problem of increasing the effectiveness of training through innovative methods developed at universities.

E-Commerce And Its Role In The Development Of Small Business Enterprises, Shukhrat Sadikov

International Finance and Accounting

This article describes the importance of e-commerce in the country's economy. Moreover, the role of e-commerce in the further development of small business and private entrepreneurship and the prospects for their effective use were also studied. Conclusions and recommendations are formed based on the research.

Indicators Of Determining The Productivity Of Motor Graders Under Natural Conditions, N.R. Aslonov, S.S. Yusubjonov, S.M. Mirkholiqov

The Scientific Journal of Vehicles and Roads

In the article, Motor Graders are self-propelled machines that level and shape the ground, and their equipment consists of a fully rotating blade overturner, located between the rear and front bridges of the pneumatic wheel drive.

The Importance Of Educational Technology In Teaching Physics Based On A Competency-Based Approach In Higher Education., Durdona Saydazimova

Central Asian Journal of Education

This article presents a comparative analysis of the traditional and competent approach to the importance of educational technologies in teaching physics on the basis of a competency-based approach in technical higher education institutions, the basic concepts of improving physics teaching methods and individual approach.

The Importance Of Educational Technology In Teaching Physics Based On A Competency-Based Approach In Higher Education., Ugiloy Nabievna Sultonova Phd

Central Asian Journal of Education

This article presents a comparative analysis of the traditional and competent approach to the importance of educational technologies in teaching physics on the basis of a competency-based approach in technical higher education institutions, the basic concepts of improving physics teaching methods and individual approach.

Improvement Of Trade And Economic Relations Of Foreign Economic Activity In The Conditions Of Transition To An Innovative Path Of Development, I. Zinkova Associate Prof., Kh. Asatullaev Prof.

International Finance and Accounting

This article examines the role of innovation efforts in technological change and involvement in trade and economic cooperation. Despite the potential offered by globalization and a liberal trade regime, the benefits of international technology diffusion can only be realized with parallel local innovation efforts and modern institutional and governance structures and supportive innovation systems.

The Role Of Industry In Socio-Economic Development And Ways Of Its Development, Jasur Yakhshilikov

International Finance and Accounting

The experience of developed countries shows that the highest share of value added in the creation of GDP and the role of industry as a key sector in providing employment is growing. Recently, the industry has become a leading sector in our country in terms of these indicators. That is, the role of industry in the socio-economic development of the country is of particular importance. Therefore, the further development of industry, especially the development of scientifically based proposals and recommendations for the sustainable development of regional industries is one of the most pressing issues today. This article covers the role …

Means Of Training And Monitoring And Methods Of Endurance Development Of Female Handball Players, Shoislom Kallibaevich Pavlov

Eurasian Journal of Sport Science

Purpose: Development and control of endurance of handball players by studying modern innovative tools and methods of endurance development, as well as improving the effectiveness of endurance training.

Methods: The following techniques are used to train endurance: The technique of evenly performed exercises is used in the training of general endurance. This method is used during training to prepare for maximum continuous training, which is performed regularly with a pulse of no more than 130 beats per minute. In most cases, recovery performed in an evenly executed exercise style can be considered insufficient. Alternating exercise styles are used to improve …

Study Of Performance Of Vertical Drainage Well Construction From Polymer Materials, I.A. Akhmedov, Z.K. Mirkhasilova

Irrigation and Melioration

The article is devoted to the reconstruction and construction of vertical drainage wells. The use of vertical drainage wells is characterized by a decrease in the level of groundwater. The article presents data and typical regions of the use of vertical drainage wells.Also presented are mechanical, physical and chemical methods of well cleaning in practice. The information on the design and construction of vertical drainage wells is described. The analysis of corrosion resistance of vertical drainage well materials and their service life has been carried out. It is known that polymeric materials are resistant to corrosive environments. Using filters made …

Technology Of System-Targeted Management Of Pre-Competitive Training Of Highly Qualified Track Cyclists, Ismoiljon Ibrahimjonovich Karimov

Eurasian Journal of Sport Science

Purpose: The purpose of this study is to develop and experimentally test the technology of system-targeted management of pre-competitive training of highly qualified track cyclists.

Methods: Analysis and generalization of literature data, analysis of competitive activity using timekeeping and heart rate monitoring methods, forecasting and modeling based on expert evaluation, instrumental research methods (Garmin and Watt Byte), model experiment simulating competitive activity in natural conditions, pedagogical experiment and methods of mathematical statistics.

Results: Based on the results of the study, it was established, in the 15 km Scratch race, it is recommended to run at an average speed over all …

The Role Of Information Technologies In Innovative Development Of Banks, Nuriddin Khojakov

International Finance and Accounting

Improvement of information technologies, as well as their widespread use as a key factor in the innovative development of banking, as in all areas, is one of the most pressing issues. This article reveals the role of information technology in the innovative development of banks. The role of modern information technologies as a means of competition in the market of remote banking services and banking services is widely analyzed. International experience on risks and security measures in the provision of modern banking services is studied and methods of risk management are described. In addition, statistical analysis was conducted on modern …

The Importance Of The Use Of 3d Printers In The Field Of Technological Education, Orif Karimov

Mental Enlightenment Scientific-Methodological Journal

This article discusses the importance of the use of 3D printers in the disciplines of technical creativity and design, product manufacturing technology and home economics in the block of specialties of technological education of higher education institutions. The general requirements for the content of the curriculum and science programs of the bachelor's degree in technology education are as follows. In accordance with the curriculum and subject programs of the bachelor's degree program, the description of the professional activities of bachelors in the field of education and the requirements for their professional competencies, students must master compulsory and elective subjects, internships …

Issues Of Effective Organization Of Activities Of Fruit Vegetable Clusters In Uzbekistan, G.T. Ismoilova

Economics and Innovative Technologies

The article highlights the importance of clusters, which are specialized in the cultivation, storage and deep processing of fruit and vegetable products in the development of the economy. The role of agro-industrial clusters in the field of fruit and vegetable production in our country, its peculiarities and opportunities for development are scientifically and practically justified.

Modern Methods Of Improving The Quality Of Education In The Organization Of The Educational Process In Higher Education, Dilshod Polotovich Mirzoev, Siddiq Kakhkhorovich Kakhkhorov

Scientific reports of Bukhara State University

Abstract. This article states that a clear formation of teaching methods is a key factor in improving the quality of teaching. It is noted that the combination of state educational technologies with practical exercises on the basis of a clear plan will serve to improve the quality of education. Methods. Interactive teaching methods such as brainstorming, blitz survey, frontal survey, small group work, round table, business game, role play, role play. Examples include the use of "debate", "problem situation", "project", "reference text", "boomerang strategy (exchange of questions)" and "conceptual analysis". Results. Examples show how effective results can be obtained using …

Technology And Technical Device Used In The Efficient Use Of Water Resources In Irrigated Agriculture, А.U. Аtajanov

Irrigation and Melioration

The economical use of water resources, the improvement and development of new technology and technical means for its implementation, ensuring the saving of irrigation water is one of the most important issues of today. This article is devoted to the issues of improving the technology of irrigation of furrows and the creation of technical means,also recommended technology and using from created technical device in selected per experiment fields and analyzing their results.

Modeling Intangible Assets Of A Logistic Organization, S. Yadgarov Nomozovich Yadgarov

Acta of Turin Polytechnic University in Tashkent

Abstract—The article presents the results of It will be relevant to fill this gap, presumably arising from insufficient elaboration of ap- proaches to the assessment of scientific knowledge, which, along with managerial knowledge and practical competencies of manage- ment in the field of logistics, generates intangible assets. In other words, it is required to show that the "science intensity" of the lo- gistics business is a capitalized asset.

Studying The Basis Of Nanotechnology In The School Program Physics, Mirzohid Islamovich Daminov, Siddik Kakhkhorovich Kakhkhorov, Utkir Rustamovich Mustafayev

Scientific reports of Bukhara State University

The article poses questions about introducing nanotechnology training into the program of the general secondary school as a special course, since nanotechnology is one of the most developing areas of modern science. We drew attention to the role of a comprehensive school in the training of modern highly-qualified personnel who can solve complex scientific, technological problems with innovative approaches.

Modeling Of The Process Of Separation Of Fine Contaminants From The Flow Of Raw Cotton In The Cleaning Zone, E E. Goyibnazarov, Sh Sh Isayev, M Y. Khakimova

Scientific-technical journal

The article examines the structures of cleaners describing the separation of large and small weed impurities from the cotton mass, will determine the parameters for calculating the cleaning effect of having an elastic bond with cotton.

Ways To Increase The Efficiency Of Using Equipment And Technology In The Conditions Of Digital Economy, O. Qozoqov Docent, S. Qozoqov

International Finance and Accounting

All-round transfer in digital economy is the important factor in the accelerated development of economy. Now in many states of the world the accelerated transfer in digital economy is carried out. Information technology is necessary for introducing in all spheres of economy. In article recommendations about questions use of technics and technology on cotton the enterprises in the conditions of digital economy are considered and offered. Specific features of technics and technology at the enterprises cotton the industries are studied. Ways of an effective utilisation of cars and mechanisms in cotton the enterprises are defined and offered.

Modeling Of The Process Of Separation Of Fine Contaminants From The Flow Of Raw Cotton In The Cleaning Zone, E. E. Goyibnazarov, Sh. Sh. Isayev, M. Y. Khakimova

Scientific-technical journal

The article examines the structures of cleaners describing the separation of large and small weed impurities from the cotton mass, will determine the parameters for calculating the cleaning effect of having an elastic bond with cotton.

New Energy And Resource Saving Technologies For Producing Silicon And Its Alloys, Kurbanov, Abdurakhmanov, Ashurov, Nuraliev

Euroasian Journal of Semiconductors Science and Engineering

The results of the developed and practically mastered new technology for producing silicon and its alloys based on the use of a gaseous carbonaceous reducing agent in the form of methane and briquetted charge are presented. The features of methane dissociation, briquetting of all types of silica - and carbon-containing finely dispersed materials and the achieved technology indicators are discussed.

Humidity Sensors Based On Composite Material With Nano-Dimensional Structures, B. Egamberdiev, F. Isroilov, C. Rahmatullaev

Euroasian Journal of Semiconductors Science and Engineering

А humidity sensor based on a composite material nanoscale structures andit is developed and the main static characteristics widi studied depending on the relative humidity of the air, and also used to measure the humidity of agricultural products. The efficiency of the proposed method for measuring the temperature and humidity of agricultural products was shown. The results experimental studies show that with the increase the sgnares of the areas (contact) crystal shunts producing nanoparticles with simultaneous decrease the total porosity of the sensor material with an increase in the duration of heat treatment, which leads to an increase the volume …

Humidity Sensors Based On Composite Material With Nano-Dimensional Structures, B. Egamberdiev, F. Isroilov, C. Rahmatullaev

Euroasian Journal of Semiconductors Science and Engineering

А humidity sensor based on a composite material nanoscale structures andit is developed and the main static characteristics widi studied depending on the relative humidity of the air, and also used to measure the humidity of agricultural products. The efficiency of the proposed method for measuring the temperature and humidity of agricultural products was shown. The results experimental studies show that with the increase the sgnares of the areas (contact) crystal shunts producing nanoparticles with simultaneous decrease the total porosity of the sensor material with an increase in the duration of heat treatment, which leads to an increase the volume …

About The Technology Of Making Reinforced Concrete Sleep By Heating Concrete At Low Temperature, Turgunbaev Urinbek Jamolovich, Movluda Umirova

Journal of Tashkent Institute of Railway Engineers

The article discusses the properties of cement stone with the use of complex chemical additives to improve the technology for the production of sleepers from prestressed concrete. With the use of superplasticizer, the volume of intergranular space and, consequently, capillary porosity, which is a determining factor for both strength and frost resistance and corrosion resistance of concrete, are significantly reduced. Also, during thermo-wet processing, at a temperature of 40 ° C, there was no decrease in the strength of cement stone and sufficient strength at the initial stage of the curing period, 36 MPa with the addition of Glenium 27 …

Photoelectric Properties Of Varisonic Structures Based On Silicon With Impurity Nanoclusters Zn And Se, Nurullа Fatkhullaevich Zikrillaev, Orzibek Bahrom Ugli Tursunov, Kobiljon Kasimjon Ugli Kurbonaliev, Manzura Shoabdurakhimova

Euroasian Journal of Semiconductors Science and Engineering

This paper shows the possibility of expanding the spectral sensitivity of silicon by creating binary compounds Zn and Se in the silicon crystal lattice. It is established that the developed technology makes it possible to obtain binary Zn and Se nanoclusters in silicon with certain physical parameters.

Advantages Of Application Of Complex Modular Teaching Technology In The English Language Classes, Sarvinoz Abdieva Phd

Philology Matters

This article is devoted to the advantage of applying the technology of integrated modular training in English classes, since the development and modernization of higher education in modern conditions has made it the goal of comprehensive formation of professional competence for a future teacher. New priorities in education are prompting teachers to search for new modern effective teaching technologies that enable achieving higher learning and upbringing results, introducing new educational technologies in the educational process.
The best practices of the teachers of many educational institutions confirm their desire for an active search and use of pedagogical technologies in working with …

Substantion Of The Parameters Of The Working Bodies Of The Cultivator For High-Quality Tillage, A.K. Igamberdiev, G.F. Usmanova

Irrigation and Melioration

In the article, the use of the entire set of soil-processing bodies as a result of the use of traditional technologies reduces soil fertility, increasing the use of natural resources, the most pressing problems in the process of soil processing, that is, soil treatment. Experimental studies have shown that the large amount of moisture content in the soil during the cultivation process causes large intake of moisture due to the release of large particles. Due to the varied soil and climatic conditions of the republic, it is recommended to use a differential approach to the selection of soil treatment methods …

The Importance Of Using The Keys-Stadi Innovative Educational Technology Method In Training The Image Module Of Geometric Shapes, Dilfuza Islomovna Mamurova, Nigora Istamovna Ibatova, Dildora Marufovna Badieva

Scientific reports of Bukhara State University

This article describes the basics of fine art, so that future architects will be able to master this science, understand geometric shapes, be able to visualize them, learn how to draw still lives and visualize the composition of their compositions. It is important to conduct a specialty. This subject expresses the importance of using case study technology.

Problems Of The State Of The Rolling Surface Of The Rail Head On Speed And High-Speed Railway Sections Of Jsc "Uzbekistan Temir Yollari", Kuvandik Saginovich Lesov, Igor Ivanovich Kuznetsov, Mukhamedali Kazbek Ugli Kenjaliev, Xushnudbek Odilbekovich Samandarov

Journal of Tashkent Institute of Railway Engineers

In the process of train traffic on the rolling surface of the rail head are formed bumps and fatigue defects, constant dynamic loads lead to the frustration the upper structure of the path. In this article the analyzes integral indicators of the rolling surface of the rails (long waves, medium waves, short waves) on the section of speed and high-speed train traffic for assess the condition of rails in transit. Problems with the formation of wave-like irregularities on the surface of the rails are identified, promising directions in solving this problem are indicated.