Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 7 of 7

Full-Text Articles in Entire DC Network

Transverse Vibration Of Clamped-Pinned-Free Beam With Mass At Free End, Jonathan Hong, Jacob Dodson, Simon Laflamme, Austin Downey Jul 2019

Transverse Vibration Of Clamped-Pinned-Free Beam With Mass At Free End, Jonathan Hong, Jacob Dodson, Simon Laflamme, Austin Downey

Faculty Publications

Engineering systems undergoing extreme and harsh environments can often times experience rapid damaging effects. In order to minimize loss of economic investment and human lives, structural health monitoring (SHM) of these high-rate systems is being researched. An experimental testbed has been developed to validate SHM methods in a controllable and repeatable laboratory environment. This study applies the Euler-Bernoulli beam theory to this testbed to develop analytical solutions of the system. The transverse vibration of a clamped-pinned-free beam with a point mass at the free end is discussed in detail. Results are derived for varying pin locations and mass values. Eigenvalue ...


Concrete Crack Detection And Monitoring Using A Capacitive Dense Sensor Array, Jin Yan, Austin Downey, Alessandro Cancelli, Simon Laflamme, An Chen, Jian Li, Filippo Ubertini Apr 2019

Concrete Crack Detection And Monitoring Using A Capacitive Dense Sensor Array, Jin Yan, Austin Downey, Alessandro Cancelli, Simon Laflamme, An Chen, Jian Li, Filippo Ubertini

Faculty Publications

Cracks in concrete structures can be indicators of important damage and may significantly affect durability. Their timely identification can be used to ensure structural safety and guide on-time maintenance operations. Structural health monitoring solutions, such as strain gauges and fiber optics systems, have been proposed for the automatic monitoring of such cracks. However, these solutions become economically difficult to deploy when the surface under investigation is very large. This paper proposes to leverage a novel sensing skin for monitoring cracks in concrete structures. This sensing skin is constituted of a flexible electronic termed soft elastomeric capacitor, which detects a change ...


Concrete Crack Detection And Monitoring Using A Capacitive Dense Sensor Array, Jin Yan, Austin Downey, Alessandro Cancelli, Simon Laflamme, An Chen, Jian Li, Filippo Ubertini Apr 2019

Concrete Crack Detection And Monitoring Using A Capacitive Dense Sensor Array, Jin Yan, Austin Downey, Alessandro Cancelli, Simon Laflamme, An Chen, Jian Li, Filippo Ubertini

Civil, Construction and Environmental Engineering Publications

Cracks in concrete structures can be indicators of important damage and may significantly affect durability. Their timely identification can be used to ensure structural safety and guide on-time maintenance operations. Structural health monitoring solutions, such as strain gauges and fiber optics systems, have been proposed for the automatic monitoring of such cracks. However, these solutions become economically difficult to deploy when the surface under investigation is very large. This paper proposes to leverage a novel sensing skin for monitoring cracks in concrete structures. This sensing skin is constituted of a flexible electronic termed soft elastomeric capacitor, which detects a change ...


Vibration-Based In-Situ Detection And Quantification Of Delamination In Composite Plates, Hanfei Mei, Asaad Migot, Mohammad Faisal Haider, Roshan Joseph, Md Yeasin Bhuiyan, Victor Giurgiutiu Apr 2019

Vibration-Based In-Situ Detection And Quantification Of Delamination In Composite Plates, Hanfei Mei, Asaad Migot, Mohammad Faisal Haider, Roshan Joseph, Md Yeasin Bhuiyan, Victor Giurgiutiu

Faculty Publications

This paper presents a new methodology for detecting and quantifying delamination in composite plates based on the high-frequency local vibration under the excitation of piezoelectric wafer active sensors. Finite-element-method-based numerical simulations and experimental measurements were performed to quantify the size, shape, and depth of the delaminations. Two composite plates with purpose-built delaminations of different sizes and depths were analyzed. In the experiments, ultrasonic C-scan was applied to visualize the simulated delaminations. In this methodology, piezoelectric wafer active sensors were used for the high-frequency excitation with a linear sine wave chirp from 1 to 500 kHz and a scanning laser Doppler ...


Model-Assisted Validation Of A Strain-Based Dense Sensor Network, Jin Yan, Xiaosong Du, Simon Laflamme, Leifur Leifsson, Chao Hu, An Chen Mar 2019

Model-Assisted Validation Of A Strain-Based Dense Sensor Network, Jin Yan, Xiaosong Du, Simon Laflamme, Leifur Leifsson, Chao Hu, An Chen

Civil, Construction and Environmental Engineering Publications

Recent advances in sensing are empowering the deployment of inexpensive dense sensor networks (DSNs) to conduct structural health monitoring (SHM) on large-scale structural and mechanical systems. There is a need to develop methodologies to facilitate the validation of these DSNs. Such methodologies could yield better designs of DSNs, enabling faster and more accurate monitoring of states for enhancing SHM. This paper investigates a model-assisted approach to validate a DSN of strain gauges under uncertainty. First, an approximate physical representation of the system, termed the physics-driven surrogate, is created based on the sensor network configuration. The representation consists of a state-space ...


Recent Advances In Piezoelectric Wafer Active Sensors For Structural Health Monitoring Applications, Hanfei Mei, Mohammad Faisal Haider, Roshan Joseph, Asaad Migot, Victor Giurgiutiu Jan 2019

Recent Advances In Piezoelectric Wafer Active Sensors For Structural Health Monitoring Applications, Hanfei Mei, Mohammad Faisal Haider, Roshan Joseph, Asaad Migot, Victor Giurgiutiu

Faculty Publications

In this paper, some recent piezoelectric wafer active sensors (PWAS) progress achieved in our laboratory for active materials and smart structures (LAMSS) at the University of South Carolina: http: //www.me.sc.edu/research/lamss/ group is presented. First, the characterization of the PWAS materials shows that no significant change in the microstructure after exposure to high temperature and nuclear radiation, and the PWAS transducer can be used in harsh environments for structural health monitoring (SHM) applications. Next, PWAS active sensing of various damage types in aluminum and composite structures are explored. PWAS transducers can successfully detect the simulated crack ...


Thin-Film Sensor For Fatigue Crack Sensing And Monitoring In Steel Bridges Under Varying Crack Propagation Rates And Random Traffic Loads, Xiangxiong Kong, Jian Li, Caroline Bennett, William Collins, Simon Laflamme, Hongki Jo Jan 2019

Thin-Film Sensor For Fatigue Crack Sensing And Monitoring In Steel Bridges Under Varying Crack Propagation Rates And Random Traffic Loads, Xiangxiong Kong, Jian Li, Caroline Bennett, William Collins, Simon Laflamme, Hongki Jo

Civil, Construction and Environmental Engineering Publications

Fatigue cracks are critical structural concerns for steel highway bridges, and fatigue initiation and propagation activity continues undetected between physical bridge inspections. Monitoring fatigue crack activity between physical inspections can provide far greater reliability in structural performance and can be used to prevent excessive damage and repair costs. In this paper, a thin-film strain sensor, called a soft elastomeric capacitor (SEC) sensor, is evaluated for sensing and monitoring fatigue cracks in steel bridges. The SEC is a flexible and mechanically robust strain sensor, capable of monitoring strain over large structural surfaces. By deploying multiple SECs in the form of dense ...