Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 6 of 6

Full-Text Articles in Entire DC Network

Energy And Exergy Analysis Of A Novel Multiple-Effect Vapor Chamber Distillation System For High-Salinity Wastewater Treatment, Hamidreza Shabgard, Ramkumar Parthasarathy, Ben Xu Dec 2019

Energy And Exergy Analysis Of A Novel Multiple-Effect Vapor Chamber Distillation System For High-Salinity Wastewater Treatment, Hamidreza Shabgard, Ramkumar Parthasarathy, Ben Xu

Mechanical Engineering Faculty Publications and Presentations

A novel modular thermally-driven multiple-effect vapor chamber distillation (MVCD) system is presented for compact and portable desalination applications. The MVCD system consists of several vapor chambers connected in series with the condenser section of the upstream vapor chambers serving as the evaporator section of the following effect. A heat transfer model accounting for the major thermal resistances was developed to predict the heat transfer and distilled water production rates. A mass transfer analysis was performed to evaluate the effect of the accumulation of the non-condensable gasses within the chambers. An exergy analysis was also conducted to quantify the efficiency of ...


Investigation Into The Thermodynamics And Kinetics Of The Binding Of Cu2+ And Pb2+ To Tis2 Nanoparticles Synthesized Using A Solvothermal Process, Jesus Cantu, John Valle, Kenneth Flores, Diego Gonzalez, Carolina Valdes, Jorge Lopez, Victoria Padilla, Mataz Alcoutlabi, Jason Parsons Dec 2019

Investigation Into The Thermodynamics And Kinetics Of The Binding Of Cu2+ And Pb2+ To Tis2 Nanoparticles Synthesized Using A Solvothermal Process, Jesus Cantu, John Valle, Kenneth Flores, Diego Gonzalez, Carolina Valdes, Jorge Lopez, Victoria Padilla, Mataz Alcoutlabi, Jason Parsons

Mechanical Engineering Faculty Publications and Presentations

In the present study, titanium (IV) sulfide (TiS2) was synthesized and investigated for the removal of Cu2+ and Pb2+ ions from aqueous solutions. TiS2 nanoparticles synthesized through a solvothermal synthesis were characterized using x-ray diffraction (XRD) and scanning electron microscopy (SEM). The average particle size for the TiS2 material was determined to be 8.03 ± 0.98 nm from the diffraction pattern. Studies were performed to examine the effects of pH, temperature, time, and interfering ions on the binding of Cu2+ and Pb2+ to the TiS2. As well isotherm studies were performed to determine the binding capacity of TiS2 for ...


Experimental Study Of Condensation In A Thermoacoustic Cooler With Various 3d Printed Regenerators Using Water Vapor As The Working Fluid, Aibek Bekkulov, Andrew Luthen, Ben Xu Oct 2019

Experimental Study Of Condensation In A Thermoacoustic Cooler With Various 3d Printed Regenerators Using Water Vapor As The Working Fluid, Aibek Bekkulov, Andrew Luthen, Ben Xu

Mechanical Engineering Faculty Publications and Presentations

Thermoacoustics (TA) deals with the conversion of heat into sound and vice versa. The device that transfers energy from a low temperature reservoir to a high temperature one by utilizing acoustic work is called TA cooler (TAC). The main components of a typical TAC are a resonator, a porous regenerator (e.g. stack of parallel plates) and two heat exchangers. The thermoacoustic phenomenon takes place in the regenerator where a nonzero temperature gradient is imposed, and interacts with the sound wave. The low temperature at the cold end of TAC can be used to condense water from the humid air ...


Pressure Effect On An Ocean-Based Humidification-Dehumidification Desalination Process, Yingchen Yang Oct 2019

Pressure Effect On An Ocean-Based Humidification-Dehumidification Desalination Process, Yingchen Yang

Mechanical Engineering Faculty Publications and Presentations

A new humidification-dehumidification (HDH) desalination process is proposed and analyzed. Being ocean based, the process does not produce any brine. It is largely powered jointly by solar energy, wind energy, and various types of ocean energies in a nearly natural way. A vacuum pump is employed to drive the air circulation throughout the HDH process. It is the only unit that consumes electricity. The HDH process is analyzed under various conditions, including using a low pressure (as low as to 0.2 atm) for humidification and the ambient pressure for dehumidification, running the entire HDH process around a low pressure ...


An Investigation Into Wayside Hot-Box Detector Efficacy And Optimization, Constantine Tarawneh, James Aranda, Veronica Hernandez, Stephen Crown, Joseph Montalvo Jun 2019

An Investigation Into Wayside Hot-Box Detector Efficacy And Optimization, Constantine Tarawneh, James Aranda, Veronica Hernandez, Stephen Crown, Joseph Montalvo

Mechanical Engineering Faculty Publications and Presentations

Wayside hot-box detectors (HBDs) are devices used to assess the health of railcar components including bearings, axles, and brakes by monitoring their temperatures. HBDs use infrared (IR) sensors to record the temperatures of railroad bearings. Bearings that trigger an alarm or exhibit warm trending are removed and sent for inspection. In many cases, no discernable defects were found in the flagged bearings. Motivated by this finding, an investigation was conducted which included performing a controlled field test as well as exhaustive laboratory testing utilizing an HBD simulator. Data acquired from field and laboratory testing was used to evaluate the accuracy ...


Simulation Of Droplet Impacting A Square Solid Obstacle In Microchannel With Different Wettability By Using High Density Ratio Pseudopotential Multiplerelaxation- Time (Mrt) Lattice Boltzmann Method (Lbm), Wandong Zhao, Ying Zhang, Wenqiang Shang, Ben Xu, Shuisheng Jiang Jan 2019

Simulation Of Droplet Impacting A Square Solid Obstacle In Microchannel With Different Wettability By Using High Density Ratio Pseudopotential Multiplerelaxation- Time (Mrt) Lattice Boltzmann Method (Lbm), Wandong Zhao, Ying Zhang, Wenqiang Shang, Ben Xu, Shuisheng Jiang

Mechanical Engineering Faculty Publications and Presentations

In this paper, a pseudopotential high density ratio (DR) lattice Boltzmann Model was developed by incorporating multi-relaxation-time (MRT) collision matrix, large DR external force term, surface tension adjustment external force term and solid-liquid pseudopotential force. It was found that the improved model can precisely capture the two-phase interface at high DR. Besides, the effects of initial Reynolds number, Weber number, solid wall contact angle (CA), ratio of obstacle size to droplet diameter ( 1 χ ), ratio of channel width to droplet diameter ( 2 χ ) on the deformation and breakup of droplet when impacting on a square obstacle were investigated. The results ...