Open Access. Powered by Scholars. Published by Universities.®
- Institution
Articles 1 - 6 of 6
Full-Text Articles in Entire DC Network
Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel
Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel
A.S. Md Abdul Haseeb
Biodiesel is currently in regular use as an alternative fuel over conventional petroleum diesel. However, corrosion of automotive materials is one of the concerns related to biodiesel compatibility issues. In addition, auto-oxidation of biodiesel can also enhance the corrosiveness of biodiesel. The present study aims to investigate inhibition effect of ethylenediamine (EDA), n-butylamine (nBA), tert-butylamine (TBA) against corrosion of cast iron. Static immersion tests in biodiesel in the presence (100 ppm) and absence of different corrosion inhibitors were carried out at room temperature for 1200 hours. At the end of the test, corrosion characteristic was investigated by weight loss measurements …
Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel
Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel
A.S. Md Abdul Haseeb
Biodiesel is currently in regular use as an alternative fuel over conventional petroleum diesel. However, corrosion of automotive materials is one of the concerns related to biodiesel compatibility issues. In addition, auto-oxidation of biodiesel can also enhance the corrosiveness of biodiesel. The present study aims to investigate inhibition effect of ethylenediamine (EDA), n-butylamine (nBA), tert-butylamine (TBA) against corrosion of cast iron. Static immersion tests in biodiesel in the presence (100 ppm) and absence of different corrosion inhibitors were carried out at room temperature for 1200 hours. At the end of the test, corrosion characteristic was investigated by weight loss measurements …
Effect Of Temperature On The Corrosion Behavior Of Mild Steel Upon Exposure To Palm Biodiesel
Effect Of Temperature On The Corrosion Behavior Of Mild Steel Upon Exposure To Palm Biodiesel
A.S. Md Abdul Haseeb
Recently biodiesel, as an alternative fuel is getting more significance to replace diesel fuel completely or partially. However, corrosion of automotive materials in biodiesel is a major concern as this can reduce engine life. This study aims to investigate the corrosion behavior of mild steel at three different temperatures such as room temperature, 50 and 80 °C. Static immersion tests in B0 (diesel), B50 (50% biodiesel in diesel), B100 (biodiesel) were carried out for 1200 h. At the end of the tests, corrosion characteristic was investigated by weight loss measurements and changes of the exposed metal surface. Fuels were analyzed …
Interfacial Reactions Between Sn-3.5 Ag Solder And Ni-W Alloy Films
Interfacial Reactions Between Sn-3.5 Ag Solder And Ni-W Alloy Films
A.S. Md Abdul Haseeb
Nickel based alloys are currently being investigated in an effort to develop stable barrier films between lead free solder and copper substrate. In this study, interfacial reactions between Ni-W alloy films and Sn-3.5 Ag solder have been investigated. Ni-W alloys films with tungsten content in the range of 5.0-18.0 at.% were prepared on copper substrate by electrodeposition in ammonia citrate bath. Solder joints were prepared on the Ni-W coated substrate at a reflow temperature of 250 °C. The solder joint interface was investigated by Cross-sectional scanning electron microscopy, energy dispersive X-ray spectroscopy and electron back scatter diffraction. It has been …
Interfacial Reaction And Dissolution Behavior Of Cu Substrate In Molten Sn-3.8ag-0.7cu In The Presence Of Mo Nanoparticles
A.S. Md Abdul Haseeb
Purpose - In electronic packaging, when solid copper comes in contact with liquid solder alloy, the former dissolves and intermetallic compounds (IMCs) form at the solid-liquid interface. The purpose of this paper is to study the effect of the presence of molybdenum nanoparticles on the dissolution of copper and the formation of interfacial IMC. Design/methodology/approach - Cu wire having a diameter of 250 μm is immersed in liquid composite solders at 250° up to 15 min. Composite solder was prepared by adding various amount of Mo nanoparticles into the Sn-3.8Ag-0.7Cu (SAC) solder paste. The dissolution behavior of Cu substrate is …
Failure Analysis Of Retrieved Uhmwpe Tibial Insert In Total Knee Replacement
Failure Analysis Of Retrieved Uhmwpe Tibial Insert In Total Knee Replacement
A.S. Md Abdul Haseeb
This study involves the failure analysis of an ultra high molecular polyethylene (UHMWPE) tibial insert from Apollo® Total Knee System, which was removed after 10. years of service from 70. years old female patient. The tibial insert was investigated by using a stereoscope, scanning electron microscope (SEM), infinite focus microscope (IFM) and energy disperse spectroscopy (EDS) to characterize the morphology and composition of the bearing surface. Differential scanning calorimetry (DSC) and Fourier transform spectroscopy (FTIR) were employed to characterize the degradation and crystallinity of the component. Gel-permeation chromatography (GPC) was used to measure the polyethylene tibial insert molecular weight. Results …