Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 8 of 8
Full-Text Articles in Entire DC Network
Influence Of Ni Nanoparticle On The Morphology And Growth Of Interfacial Intermetallic Compounds Between Sn-3.8ag-0.7cu Lead-Free Solder And Copper Substrate
A.S. Md Abdul Haseeb
This paper reports on the effects of adding Ni nanoparticles to a Sn-3.8Ag-0.7Cu solder. The nanocomposite was prepared by manual blending of SAC solder paste with various percentages of Ni particles. Results showed that the addition of Ni nanoparticles did not bring any significant change in the onset melting temperature of the solder. An increase in the weight percentage of nanoparticles in the solder caused an increase of the wetting angle and a decrease of spreading rate. Moreover, the addition of Ni nanoparticles changed the interfacial intermetallic compound morphology from a scalloped structure into a planar type structure, enhanced the …
Effects Of Reflow On The Interfacial Characteristics Between Zn Nanoparticles Containing Sn-3.8ag-0.7cu Solder And Copper Substrate
A.S. Md Abdul Haseeb
Purpose - The purpose of this paper is to investigate the effects of zinc (Zn) nanoparticles on the interfacial intermetallic compounds (IMCs) between Sn-3.8Ag-0.7Cu (SAC) solder and Cu substrate during multiple reflow. Design/methodology/approach - The nanocomposite solders were prepared by manually mixing of SAC solder paste with varying amounts of Zn nanoparticles. The solder pastes were reflowed on a hotplate at 250 C for 45 s for up to six times. The actual Zn content after reflow was analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The wetting behavior of the solders was characterized by analyzing the contact angles and …
Effects Of Reflow On The Interfacial Characteristics Between Zn Nanoparticles Containing Sn-3.8ag-0.7cu Solder And Copper Substrate
A.S. Md Abdul Haseeb
Purpose - The purpose of this paper is to investigate the effects of zinc (Zn) nanoparticles on the interfacial intermetallic compounds (IMCs) between Sn-3.8Ag-0.7Cu (SAC) solder and Cu substrate during multiple reflow. Design/methodology/approach - The nanocomposite solders were prepared by manually mixing of SAC solder paste with varying amounts of Zn nanoparticles. The solder pastes were reflowed on a hotplate at 250 C for 45 s for up to six times. The actual Zn content after reflow was analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The wetting behavior of the solders was characterized by analyzing the contact angles and …
Effects Of Reflow On The Interfacial Characteristics Between Zn Nanoparticles Containing Sn-3.8ag-0.7cu Solder And Copper Substrate
A.S. Md Abdul Haseeb
Purpose - The purpose of this paper is to investigate the effects of zinc (Zn) nanoparticles on the interfacial intermetallic compounds (IMCs) between Sn-3.8Ag-0.7Cu (SAC) solder and Cu substrate during multiple reflow. Design/methodology/approach - The nanocomposite solders were prepared by manually mixing of SAC solder paste with varying amounts of Zn nanoparticles. The solder pastes were reflowed on a hotplate at 250 C for 45 s for up to six times. The actual Zn content after reflow was analyzed by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The wetting behavior of the solders was characterized by analyzing the contact angles and …
Stability Of Molybdenum Nanoparticles In Sn-3.8ag-0.7cu Solder During Multiple Reflow And Their Influence On Interfacial Intermetallic Compounds
A.S. Md Abdul Haseeb
This work investigates the effects of molybdenum nanoparticles on the growth of interfacial intermetallic compound between Sn-3.8Ag-0.7Cu solder and copper substrate during multiple reflow. Molybdenum nanoparticles were mixed with Sn-3.8Ag-0.7Cu solder paste by manual mixing. Solder samples were reflowed on a copper substrate in a 250 °C reflow oven up to six times. The molybdenum content of the bulk solder was determined by inductive coupled plasma-optical emission spectrometry. It is found that upon the addition of molybdenum nanoparticles to Sn-3.8Ag-0.7Cu solder, the interfacial intermetallic compound thickness and scallop diameter decreases under all reflow conditions. Molybdenum nanoparticles do not appear to …
Effects Of Co Nanoparticle Addition To Sn-3.8ag-0.7cu Solder On Interfacial Structure After Reflow And Ageing
A.S. Md Abdul Haseeb
Effects of Co nanoparticle additions to Sn-3.8Ag-0.7Cu on the structure of solder/copper interface have been studied after reflow and high temperature ageing (150 °C, up to 1008 h). Results show that the Co nanoparticles substantially suppress the growth of Cu3Sn but enhance Cu 6Sn5 growth. Cobalt nanoparticles reduce interdiffusion coefficient in Cu3Sn. It is suggested that the Co nanoparticles undergo surface dissolution during reflow and exert their influence, at least partially, through alloying effect. © 2011 Elsevier Ltd. All rights reserved.
Interfacial Reaction And Dissolution Behavior Of Cu Substrate In Molten Sn-3.8ag-0.7cu In The Presence Of Mo Nanoparticles
A.S. Md Abdul Haseeb
Purpose - In electronic packaging, when solid copper comes in contact with liquid solder alloy, the former dissolves and intermetallic compounds (IMCs) form at the solid-liquid interface. The purpose of this paper is to study the effect of the presence of molybdenum nanoparticles on the dissolution of copper and the formation of interfacial IMC. Design/methodology/approach - Cu wire having a diameter of 250 μm is immersed in liquid composite solders at 250° up to 15 min. Composite solder was prepared by adding various amount of Mo nanoparticles into the Sn-3.8Ag-0.7Cu (SAC) solder paste. The dissolution behavior of Cu substrate is …
Study Of The Wear Behaviour Of Al-4.5% Cu-3.4% Fe In Situ Composite: Effect Of Thermal And Mechanical Processing
A.S. Md Abdul Haseeb
Al-Cu-based MMCs reinforced by Al-Fe intermetallics are investigated for their wear behaviour. The composite (Al-4.5 mass% Cu-3.4 mass% Fe) was produced by solidification processing where the Al-Fe-based intermetallic formed in situ in a matrix of mainly Al-Cu alloy. The effects of thermal and mechanical processing, viz., as-cast condition, solution treatment, aging and hot rolling on the wear behaviour of the composites were examined. The composites were characterized by optical microscopy, SEM, microhardness measurements and X-ray diffraction. The wear behaviour of the composites was studied in a pin-on-disc type wear apparatus. The as-cast in situ composite exhibited the highest wear rate. …