Digital Commons Network^™

Antiviral Peptide Nanocomplexes As Potential Therapeutics For The Treatment Of Infectious Diseases, Jinjin Zhang

Theses & Dissertations

Hepatitis C Virus (HCV) is recognized as a major burden in global public health, which can be further exacerbated by several cofactors such as human immunodeficiency virus (HIV). Currently, there is no vaccine for HCV. The emergence of potent and highly specific direct-acting antivirals (DAA) has marked a new era in HCV therapy, however, the remaining issues like affordability, genotype dependency, and potential resistance still necessitate the development of additional therapeutic approaches to be used instead or in combination with DAA.

Recently, the antiviral peptide C5A (in our studies designated as p1) and its cationic derivative p41 have been identified …

Understanding The Influence Of Non-Covalent Interactions And Nanoparticle Geometries In Carbon Based Polymer Nanocomposites, Bradley Carroll Miller

Doctoral Dissertations

Low-loading polymer nanocomposites (PNC) are an area of great interest in polymer science. As nanoparticles (NP) are typically expensive in comparison to matrix materials; the low loading regime makes the most efficient use of materials, and represents the optimum for realizing cost effective, high-performance PNCs. However, formulating effective low-loading composites is not without challenges. In addition to the typical requirement of good dispersion for efficient translation of NP properties to the bulk, low-loading composites can sometimes exhibit anomalous (non-classical) dynamics, and unpredictable properties. It is within this context that this thesis aims to examine the effects of NP geometry and …

Solution And Surface Properties Of Architecturally- And Compositionally-Complex Block Copolymers And Their Binary Mixtures, Jesse Lawrence Davis

Doctoral Dissertations

The spontaneous generation of complex structures from polymeric building blocks provides a simple yet effective route to create useful soft matter structures having potential application in a variety of nanotechnologies. The topology, chemical structure, block composition, and sequence of the constituent building blocks of polymers are tunable through synthetic chemistry. This tunability offers attractive opportunities to generate complex, yet well-defined structures with control over the geometry, packing symmetry, and microdomain structure. This thesis work involves the study of the self-assembly behaviors of architecturally complex amphiphilic block copolymers (ABCs). ABCs are composed of two or more chemically distinct blocks that are …

Novel Thermoplastic Elastomers Based On Benzofulvene: Synthesis And Mechanical Properties, Weiyu Wang

Doctoral Dissertations

Thermoplastic elastomers (TPEs) are of great importance both academically and technologically. Currently TPEs are the predominated form of styrene-diene copolymers. However, these styrenic TPEs have serious limitations in applications, especially at higher temperature, because of their low upper service temperature (UST). The work described in this dissertation aimed to developing thermoplastic elastomers with a higher UST and lower cost.

In order to develop TPEs with a higher UST, we employed benzofulvene, an anionically polymerizable monomer in hydrocarbon solvent at room temperature, as the glassy block and copolymerized it with isoprene to prepare polybenzofulvene-polyisoprene-polybenzofulvene (FIF) triblock copolymers. Among all triblock copolymers …

All-Acrylic Multigraft Copolymers: Synthesis And Structure-Property Relationship For Producing Next Generation Thermoplastic Elastomers, Andrew Brown Goodwin

Doctoral Dissertations

Polymer architecture and the advancement of molecular design using anionic and other controlled polymerization methods continues to be of significant research interest because of the tunable approach it provides, which can impact numerous applications ranging from thermoplastics to drug delivery systems. Among the numerous branched structures currently investigated, comb and graft copolymers continue to provide tailored materials which exhibit superior mechanical properties when compared to their di- and triblock linear counterparts. More specifically, the incorporation of two or more monomers into graft and multigraft constructions where the side chains are composed of a plastic (high T_g [glass transition temperature]) …

The Effect Of Composition And Architecture On Polymer Behavior In Homopolymer Blends And Inter-Filament Bonding In 3d Printed Models, Edward Roy Duranty

Doctoral Dissertations

This dissertation presents work that increases our understanding of the effects of composition and architecture on copolymer structure and dynamics and how they affect material diffusion between filaments in a 3D printed model. Copolymers are polymer chains made up of at least two different monomers. The ordering and arrangement of the two monomer species within a copolymer can have drastic effects on the behavior and properties of the copolymer.

The first chapter of this dissertation examines how the copolymer composition affects the structure and dynamics of the chain in a homopolymer blend. This study used a modified Monte Carlo BFM …

Production And Characterization Of Cut Resistant Acrylic/Copolyaramid Fibers Via Bicomponent Wet Spinning, Stephen Hipp

All Dissertations

A composite fiber system consisting of a sheath core bicomponent polymer fiber loaded with hard ceramic particles was developed and characterized for use in cut protective clothing. The core component was comprised of a copolyaramid in order to provide high base cut resistance. An acrylic-copolyaramid polymer blend was used for the sheath component to improve processability and provide potential benefits such as dyeability. Lastly, aluminum oxide particles were incorporated into the fiber core to deflect and deform the cutting edge, further improving cut resistance. A series of designed experiments was used to explore the effects of the wet spinning and …

Preparation And Characterization Of Thermodynamically Controlled Polymer Nanocomposites, Jiadi Hou

Masters Theses

The mechanical and physical properties of polymeric materials can be greatly improved by adding nanoscale additives. To mediate the dispersion of nanoparticles in polymers, it is often necessary to modify their surfaces to prevent aggregation. While polymer nanocomposites system consisting of homopolymer-grafted nanoparticles are well understood, copolymer-functionalized nanoparticles are less well understood but provide additional ways to alter dispersion through the use of chemically different comonomers. In this thesis, polystyrene nanocomposites blended with copolymer-grafted nanoparticles were prepared and studied. The particular comonomers used were methyl methacrylate and cyclohexyl methacrylate, which provides miscibility with polystyrene. Polymers with varying comonomer ratios were …

Hybrid Aryl-Ether-Ketone And Hyperbranched Epoxy Networks, John Misasi

Dissertations

In this dissertation, relationships between chemical structures, cure kinetics and network architectures are correlated to bulk mechanical properties for novel, hybrid epoxy-amine networks. The work is split into two primary sections: the first is the synthesis and characterization of multifunctional glassy networks based on aryl-ether-ketone diamine curatives, while the second is based on the synthesis and characterization of hyperbranched epoxy polymers and their resulting networks.

Three aryl-ether-ketone (AEK) diamines of increasing molecular weights were synthesized and used to cure 4,4’-tetraglycidylether of diaminodiphenylmethane (TGDDM); the resulting networks were compared to 4,4’-diaminodiphenyl sulfone cured TGDDM. Architectural differences were created by varying cure …

Hydrogen Bond-Mediated Structural Order In Hydroxylated Bis-Mpa Dendritic Polymers: Experimental And Molecular Dynamics Simulation Study, Maliha N. Syed

Dissertations

Dendritic architectures are echoed throughout nature. While the significance of these pervasive patterns is not entirely clear, connections between their structures and physical properties are fascinating to contemplate. Particular interest has been paid to a family of synthetically manufactured and commercially available dendritic polymers based on 2,2-bis(hydroxymethyl) propionic acid (bis-MPA) as a monomer. Composed of two hydroxyls and a carboxyl group, bis-MPA based structures hydrogen bond (H-bond) profusely. Given the high concentration and unique spatial orientation of end-groups, as well as the multitude of carbonyl, ester, and ether interior H-bond acceptors, a set of distinct H-bond organizations may be observed …

Siloxane And Silane-Functionalized Polynorbornenes As Membranes For Passive Carbon Dioxide Separation, Eunice Koheun Hong

Masters Theses

In 2012, carbon dioxide (CO₂) [carbon dioxide] accounted for approximately 82% [percent] of all U.S greenhouse gas emissions.¹ These excessive CO2 levels have been attributed to climate changes that have a range of negative effects on human health and welfare.1 In an effort to decrease these emissions, polymeric membranes consisting of silane- and siloxane-functionalized norbornene units have been targeted as a potential solution for the passive separation of CO2 from other non-greenhouse gases. These substituted norbornene-based polymers were synthesized via vinyl-addition polymerization. Through a series of catalyst trials, commercially available palladium and nickel catalysts were compared along …

Development Of Dual-Cure Hybrid Polybenzoxazine Thermosets, Jananee Narayanan Sivakami

Dissertations

Polybenzoxazines are potential high performance thermoset replacements for traditional phenolic resins that can undergo an autocatalytic, thermally initiated ring - opening polymerization, and possess superior processing advantages including excellent shelf-life stability, zero volatile loss and limited volumetric shrinkage. The simplistic monomer synthesis and availability of a wide variety of inexpensive starting materials allows enormous molecular design flexibility for accessing a wide range of tailorable material properties for targeted applications. Despite the fact, once fully cured, benzoxazines are difficult to handle due to their inherent brittleness, leaving a very little scope for any modifications. The motivation of this dissertation is directed …

Syneresis And Rheology Mechanisms Of A Latex-Heur Associative Thickener System, Travis Bruno Smith

Master's Theses

Rheology modifiers are used in paints and coatings to ease their application to a surface, prevent sagging once applied, and allow the leveling of brushstrokes, among other benefits. The early rheology modifiers were hydroxyethyl celluloses (HECs), a type of non-associative thickener that is relatively inexpensive and synthesized from cellulose, which is abundant. However, coatings that are modified with HECs tend to suffer from poor leveling and syneresis (phase separation). HECs have since been replaced with associative thickeners (ATs). These thickeners, when properly formulated, produce stable dispersions that have improved rheological properties, yet, unlike HECs, are sensitive to changes to the …

Molecular Interpretation Of A Trigger For Controlling An Amine Isocyanate Polyurethane Reaction, Katherine V. Carrasquillo

Masters Theses

The temperature profile needed to complete the reaction between the sodium-diamine complex and the isocyanate terminated prepolymer has been established. The sodium diamine complex has the advantage of blocking the nearly instantaneous reaction between the diamine and isocyanate from taking place until it is released at elevated temperatures. Because of its low melting temperature (~40 °C) and its low molecular weight (low viscosity), this chain extension reaction is not dependent on the participation of the prepolymer. Instead, the rate of reaction is dependent on the dissolution of the 4,4’-methylenedianiline (MDA) complex into the system. The dissolution of the MDA complex …

Impact Of Fabrication Parameters On The Internal Structure Of Poly(3-Hexylthiophene) Nanoparticles, Dana Desiree Algaier

Doctoral Dissertations

Morphological control of organic functional materials is central to understanding and improving upon current technologies. The ability to create hierarchical assemblies with purposeful design from nano to meso scale has remained largely unattainable. This body of work aims to provide a foundation for creating nanoscale domains of poly (3-hexylthiophene) (P3HT) that can be used as building blocks to larger scale assemblies. We present a method for the fabrication of P3HT nanoparticles on the ability to vary the particle size and more importantly, the internal structure. We have identified the oil phase and surfactant as parameters able to influence the nature …

From Molecular Scale To Mesoscale: Establishing Structural Control Organic Photovoltaics Using Organic Nanoparticles, Timothy S. Gehan

Doctoral Dissertations

Organic photovoltaic devices use an active layer of organic materials that absorbs light and creates free charges to generate electricity. Such organic photovoltaics have many desirable properties as the final devices can be very lightweight, thin, flexible, have low manufacturing costs, and be semitransparent. These properties make them particularly advantageous for myriad of applications: e.g., use on non-planar surfaces, as tinted coatings on windows, any use for charging low power devices. One of the biggest problems preventing organic photovoltaics from being commercialized is controlling the packing of the organic materials within the active layer from the molecular scale through the …

Conjugated Polymers In Thermoelectric Composites And Small Molecules For High Light Absorptivity, Murat Tonga

Doctoral Dissertations

Over the past several decades with increasing of global energy demand, thermoelectric materials have gained considerable attention due to their unique ability to directly convert heat to electricity. In addition to inorganic semiconductors, polymers are potential candidates for high-performance thermoelectric applications due to their intrinsic advantages such as low thermal conductivity, solution processability, and roll-to-roll production, lightweight, and flexible thermoelectric modules. This thesis provides an insight into the emerging field of organic thermoelectrics, more specifically, thermoelectric power generation based on the composites of conducting polymers (MEH-PPV, P3HT and PEDOT:PSS) and carbon nanotubes (SWNT, SWNT-COOH, SWNT-OH and MWNT). A substantial portion …

Protein Charge Anisotropy Mediated Self-Association And Phase Separation, Daniel P. Seeman

Doctoral Dissertations

Protein charge anisotropy results from the asymmetric distribution of charged residues on the exterior of a particular protein. Interactions between proteins and other macromolecules can be described in terms of attractive electrostatics; since electrostatic free energies, at optimal I, are on the order of kT, it is unlikely that such associations would result in desolvation, thus it is reasonable to consider such intermolecular attractions as being mediated by hydrated protein surfaces. Such interactions can be broken down in terms of a single protein interacting with a range of “binding partners”, including (1) protein-protein interactions, (2) protein-polymer interactions, and …

Polymer And Fullerene Zwitterions: From Synthesis To Solar Cells, Zachariah A. Page

Doctoral Dissertations

This thesis describes the synthesis and applications of hydrophilic conjugated polymers and fullerenes containing dipole-inducing pendent groups. The pendent groups include tertiary amines, sulfobetaine (SB) zwitterions, quaternary ammoniums, and sulfonates, providing solubility in polar solvents. Particular emphasis is placed on zwitterions functalized structures. Suzuki-Miyaura (SM) and Horner-Wadsworth-Emmons (HWE) coupling reactions proved valuable for the preparation of the hydrophilic conjugated polymers, while the Prato reaction afforded the functional fulleropyrrolidines. Ultraviolet photoelectron spectroscopy (UPS) probed the interactions between the hydrophilic conjugated polymers and conductive metal substrates. In particular, UPS revealed that conjugated polymer zwitterions (CPZs) substantially reduce work function (Φ) of metals, …

Responsive Supramolecular Assemblies Based On Amphiphilic Polymers And Hybrid Materials, Longyu Li

Doctoral Dissertations

The design and synthesis of responsive supramolecular assemblies are of great interest due to their applications in a variety of areas such as drug delivery and sensing. We have developed a facile method to prepare self-crosslinking disulfide-based nanogels derived from an amphiphilic random copolymer containing a hydrophilic oligo-(ethylene glycol)-based side-chain functionality and a hydrophobic pyridyl disulfide functional group. This thesis first provides a concept of studying the influence of Hofmeister ions on the size and guest encapsulation stability of a polymeric nanogel. The size and core density of nanogel can be fine-tuned through the addition of both chaotropes and kosmotropes …

Large-Pore Mesoporous Organosilicas And Related Polymer Nanocomposites, Amanpreet Singh Manchanda

Dissertations, Theses, and Capstone Projects

The research work in this dissertation covers the synthesis of mesoporous organosilicas and (organo)silica/polymer nanocomposites. The content can be divided into 4 parts (8 chapters).

The first part of the dissertation is the introduction, which covers the background and progress in the field of mesoporous silicas, periodic mesoporous organosilicas and related inorganic/polymer nanocomposites. The second part of the dissertation (Chapter 2-5) involves the synthesis of mesoporous organosilicas from different organosilane precursors at mild acid concentration (0.1 M HCl) and low temperature (0 or 7 ℃) using Pluronic F127 (EO₁₀₆PO₇₀EO₁₀₆) as a surfactant template. Chapter …

Polymer Pen Printing: A Tool For Studying 2d Enzymatic Lithography And Printing 3d Carbon Features, Zhantong Mao

Dissertations, Theses, and Capstone Projects

Polymer Pen Lithography (PPL) is a promising molecular printing approach which combines the advantages of both microcontact printing (low cost, high-throughput) and the dip pen lithography (DPN) (arbitrary writing, high-resolution) into one cohesive lithography method to create 2 dimensional (2-D) patterns with micro/nano-features on different substrates. The goal of this dissertation is to design and develop a new tool based upon PPL, which is not limited to forming 2D parallel patterns, but can also create 3D complex microstructures, finding applications in both biotechnology and Micro-Electro-Mechanical systems (MEMS) technology. This novel approach is named Polymer Pen Printing. Different from PPL using …

Revision-Polyurethane-Graphene Nanocomposites For Corrosion-Resistant Coatings, Alexandra Rose Stevenson

Master's Theses

Corrosion is a prevalent concern throughout the world, causing significant monetary and safety concerns. Research has been dedicated to developing cost-effective solutions for corrosion that will also meet increasingly stringent environmental regulations. The recently discovered nanomaterial graphene has been proposed as a potential component in anticorrosion technology due to its strong air and water barrier properties. However, graphene is a relatively expensive, difficult to synthesize material. By incorporating it into nanocomposites, its properties can be exploited even at low concentrations. Previous work has been conducted involving the preparation of anticorrosive polystyrene-graphene nanocomposites; these materials were found to be effective long-term …

Design And Application Of Organic Electronic Materials: Pendant Tuning In Polymeric And Molecular Systems, Jonathan S. Tinkham

Doctoral Dissertations

Designing and synthesizing materials for use in organic electronic materials requires fine control over their optical and electronic properties. Variations through substitution can be used to tune solubility and electronic properties, but this can result in degradation of other properties. Substitution with orthogonal pendant groups in both molecular and polymeric systems has the potential for allowing tunability while decreasing the perturbation of other desirable properties of the parent system. This idea was explored through experimental and computational work. Computational modelling was used to understand and predict the properties of molecular and polymeric systems to narrow the wide number of choices …

Physicochemical And Toxicological Assessment Of Antimicrobial Ε-Polylysine-Pectin Complexes, Cynthia L. Lopez Pena

Doctoral Dissertations

ε-Polylysine is an appealing FDA-approved, all natural antimicrobial biopolymer effective against a wide range of microorganisms. Its implementation is greatly limited by its strong cationic charge, which has been linked to instability in food systems, perceived astringency and bitterness, and the ability to inhibit lipid digestion. Previous studies have shown that controlled complexation of ε-polylysine with anionic pectin is able to prevent instability and astringency in simplified model food systems, while maintaining the antimicrobial character of polylysine. Isothermal titration calorimetry, micro-electrophoresis, microscopy, and turbidity analyses of the stability of electrostatic pectin-polylysine complexes in the presence of strongly anionic κ-carrageenan, and …

Tunable Photonic Multilayers From Stimulus-Responsive, Photo-Crosslinkable Polymers, Maria C. Chiappelli

Doctoral Dissertations

This dissertation describes the synthesis of photo-crosslinkable copolymers and their utilization for the fabrication and testing of tunable and responsive one-dimensional (1D) photonic multilayers. Photonic multilayers exhibit structural color due to the interference of incident light at layer interfaces, providing a convenient route towards optically responsive materials that do not rely on potentially light- or oxygen-sensitive chromophore-containing pigments and dyes. A fabrication technique based on sequential spin-coating and crosslinking of photo-crosslinkable polymers is used to assemble tunable and responsive photonic multilayers. Chapter One introduces the fundamental underlying principles of 1D photonic structures and explores their importance in a variety of …

Self-Assembly And Stimuli-Responsive Properties Of Amphiphilic Self-Immolative Block Co-Polymers, Thomas Mackenzie Gungor

Electronic Thesis and Dissertation Repository

In recent years, degradable polymers have become increasingly researched for their applications in drug delivery systems, adhesives, and tissue engineering. Self-immolative polymers (SIPs) are of particular utility due to predictable end-to-end backbone depolymerization after a stimuli-responsive end-cap cleavage. There are examples of incorporating a hydrophobic SIP into an amphiphilic block-copolymer, followed by self-assembly in aqueous media forming various nanoparticle morphologies. However, their self-assembly behaviour has not been described in detail, and there are no general synthetic methods that allow for their synthesis with good control over the relative hydrophilic block ratio, the major factor controlling their morphology. This thesis presents …

Rational Design Of Materials For The Protection Of Outdoor Metalworks, Natasja Alexandria Swartz

Dissertations and Theses

Protective coatings are commonly used to protect culturally significant works, such as outdoor sculptures and architectural elements. Given the valuable nature of such metalworks, there is a surprising lack of environmentally sustainable coatings available for their conservation. High performance clear coatings are not developed or thoroughly tested for compatibility and longevity on outdoor sculptures. This can make the implementation of both methods and materials, no matter how promising in a lab, a significant hurdle for the conservation science community. This dissertation work initially aims to replace high-VOC formulations such as acrylic lacquers and waxes currently used as protective coatings for …

Ion Transport In Polymer Electrolytes, Fei Fan

Doctoral Dissertations

Batteries with superior performance will advance many technologies, such as the field of energy storage and electrochemical devices. Traditional lithium ion batteries based on liquid electrolytes have intrinsic problems such as leaking, dendrite growth, and those problems are associated with fire or even explosion hazard. Extensive efforts have been devoted into the development of solid polymer electrolytes (SPEs), which would not only reduce the size and weight of the batteries, but also solve safety related issues. However, none of current dry SPEs have reached the desired conductivity of 10^-3 [0.001] S/cm at ambient temperature. The ion conductivity is controlled …

Forensic Significance Of Teal Colored Cashmere And Black Acrylic Fibers, Nicole M. Martin

Forensic Science Theses

Textile fibers are a valuable type of trace evidence within forensic cases. They have the ability to connect a perpetrator to a victim and or a crime scene. Some types of fibers are more prevalent than others. The purpose of this research was to conduct a target fiber study in order to determine the significance of the selected fibers in a forensic case. Two fibers were selected from two different garments, black acrylic fiber and a teal colored cashmere fiber. Unknown fibers were collected from three local clothing stores and counted. Using light microscopy, all 20,164 fibers were eliminated as …