Digital Commons Network^™

Novel Microdevices To Analyze Toxic Volatile Organic Compounds., Sujoy Halder

Electronic Theses and Dissertations

There has been a growing interest to measure volatile organic compounds (VOCs) in a range of environmental applications. The presence of toxic VOCs in the air has been associated with serious health problems including asthma, central nervous system dysfunction, cardiovascular disease and cancer, etc. Different analytical instruments such as gas chromatography-mass spectrometry (GC-MS) and sensor systems, such as metal oxide sensors are used to analyze VOCs. However, challenges still exist in the detection of airborne VOCs because of their trace concentration and interference with complex gas mixtures. In this dissertation, two microfabricated devices, a sensor array and a micropreconcentrator were …

Detection Of Toxic Aldehydes In Aerosols Of Electronic Cigarettes., Ellie Bess Reed

Electronic Theses and Dissertations

Over the past decade, use of electronic cigarettes (e-cigarettes) has increased in the younger generations of the United States. With the broad range of flavors and devices distributed on the market, American youth are prime marketing targets for the e-cigarette industry. To create a more regulated market, research of this thesis has been conducted on newer generations of e-cigarette “MOD” devices to examine how e-cigarette battery power output and coil temperature, concentrations of propylene glycol and vegetable glycerin, added flavorings (strawberry, mango, and menthol), and the presence of nicotine affect generation of aerosol particles and aldehydes in aerosols emitted by …

Synthesis, Property Tuning And Degradation Studies Of Phosphorene-Based Materials., Usman Onuminya Abu

Electronic Theses and Dissertations

Two-dimensional (2D) layered materials have sparked the interest of researchers because of their interesting properties drawn from quantum confinement effects, elevated density of states (DOS), increased surface area, increased active sites, etc. Phosphorene, an interesting addition to the 2D material family in 2014, has interesting properties such as in-plane anisotropy, elevated carrier mobility and thickness-dependent bandgaps that have made it a material of intense interest. Furthermore, there have been theoretical studies predicting that phosphorene could be made even more versatile by intercalating alkali atoms into its layers. Intercalation has proven to be a veritable tool for synthesis, modification, transformation, and …

Anion Alloying Of Iii-V Semiconductors For Water Splitting., Sonia Calero-Barney

Electronic Theses and Dissertations

The challenge of solar energy conversion and storage translates into the discovery and development of semiconductor materials that can transform sunlight energy into electricity and/or high-energy-density fuels in a cost-effective way. From the solar energy conversion perspective, cation-alloyed III-V solar cells hold record-breaking energy conversion efficiencies, while anion-alloyed III-V’s are particularly interesting for photoelectrochemical hydrogen generation. The major challenge for the adoption of III-V-based technologies lies in the high manufacturing costs of established synthesis techniques and the difficulty to control the composition of ternary alloys. One of the materials investigated in this work is GaSb_zP_1-z. Thermodynamic …

Engineering Lewis Acidic Materials For Biomass Conversion And Battery Applications., Md Anwar Hossain

Electronic Theses and Dissertations

My long-term goal is to develop catalytic systems to produce renewable energy for a sustainable society. The overall research objective of my dissertation is to advance understanding of Lewis acidic materials for (1) conversion of renewable lignin into phenolics and (2) enhanced cycling stability of lithium metal batteries to safely store renewable electricity from wind and solar, thereby laying the groundwork for our transition to a sustainable society. Petroleum is a conventional feedstock for current transportation fuels (gasoline, diesel, and jet fuels). However, petroleum is a finite resource and produces greenhouse gases (CO₂ and CH₄) upon processing, …

Materials And Interfaces For Electrocatalytic Hydrogen Production And Utilization., Alexander Jiya Gupta

Electronic Theses and Dissertations

Mass industrialization over the last few centuries has created a global economy which is dependent upon fossil fuels to satisfy an exponentially increasing demand for energy. Aside from the possible depletion of this finite resource, the combustion of fossil fuels releases greenhouse gases into the atmosphere which cause the global temperature to rise – a phenomenon which has already begun to create geologic and geopolitical instability and shows no signs of abatement. One proposed method to rid humanity of its dependence on fossil fuels is to use green hydrogen as an energy carrier. In this scheme, excess electricity from a …

Scalable Synthesis Of Alumina Nanowires By Wet Chemical Method., Luis N Moreno

Electronic Theses and Dissertations

To satisfy an increasing demand for large-scale processes for producing alumina nanomaterials, a wet chemical method was evaluated. A potassium salt precursor was combined with aluminum to produce alumina – based nanowires. Compared with current methods such as thermal oxidation, sol-gel, and laser ablation, this method is highly scalable due to relatively low energy requirements and the ability to carry out the primary reaction under ambient conditions. The nanowire samples were evaluated using SEM, XRD, BET, and TEM to confirm morphology, phases present, and surface area. A porous nanowire structure was confirmed which has a BET surface area of 324.6 …

An Introductory Study Of Coal Fly Ash Enhancement For Heavy Metal Removal In Wastewater Treatment., Samuel T. Romes

Electronic Theses and Dissertations

Coal Combustion Products are the materials that remain after pulverized coal is burned to generate electricity. The fine portion, fly ash, has many re-use capabilities across various industries. Most recent data shows that approximately 60% of fly ash produced in the United States was used with the largest re-use being concrete additives. This work aims to enhance fly ash via hydrothermal treatment in order to expand the re-use capabilities of the material. These materials were tested as adsorbents for heavy metal removal from wastewater samples. The metals tested for removal were Copper (II) Acetate, Cadmium Chloride, Boric Acid, Sodium Selenite, …

Wetting And Drying Dynamics For Tio2 With Pbs Quantum Dots., Kelly M. Lee

Electronic Theses and Dissertations

Initial solar cells utilized silicon and alloys for their economic viability. Photoelectrochemical photovoltaic cells were discovered with technological advancement which increased solar efficiency and further improved economic feasibility leading to quantum dot sensitized solar cells. Lead sulfide quantum dots and titanium dioxide were studied for wetting and drying effects. Zeta potential, pH values, SEM, and optical microscopes quantified or observed the colloidal suspension and dried sample behavior. Combined mixtures of lead sulfide and titania were dried at 3.6 pH and 12.56 pH values. This due to the observed zeta potential isoelectric point of titania, and behavior showed increased stability occurring …

Room Temperature Alkali Treatment Of Rice Straw For Enhanced Enzymatic Hydrolysis., Seth Mains

Electronic Theses and Dissertations

Due to the pollution of fossil fuels due to greenhouse emissions, researchers continue to search for alternative methods that allow for the clean production of energy, fuels, and polymer fibers. A method currently under investigation is the use of lignocellulosic biomass as a solution to current problems with energy and polymer fiber production. Through the process of pretreatment, possibilities for lignocellulosic biomass expand due to improved accessibility of the cellulose and hemicellulose which can be broken down via enzymatic hydrolysis into C5 and C6 sugars such as xylose and glucose. This study investigated the fermentation of the rice straw into …

The Study Of Copper Corrosion Mechanisms Using Electrochemical Experimental Techniques., Evan Grimm

Electronic Theses and Dissertations

The purpose of this study was to discover and thoroughly explain the corrosion mechanisms of copper in saltwater, tap water and deionized water, and to apply these methods and findings when testing the corrosion mechanisms of other materials. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, and Tafel analysis.

The copper was found to corrode at a greater rate in saltwater, followed by tap water then deionized water, with a larger difference between saltwater and tap water than between tap water and deionized water. Each reaction was found to be both kinetically …

Mixed Metal Oxide Nanowires Via Solid State Alloying., Veerendra Atla

Electronic Theses and Dissertations

Mixed metal oxide materials with composition control find applications in energy conversion and storage processes such as heterogenous catalysis, photoelectrochemical catalysis, electrocatalysis, thermal catalysis, and lithium-ion batteries. Mixed metal oxides and/or complex oxides with composition control and in one-dimensional form as nanowires could be interesting to various catalysis applications due to control on single crystal surfaces, active sites, acidity versus basicity site density, and oxygen vacancies. The major challenge is to synthesize mixed metal oxide nanowires beyond binary oxides with composition control. In this dissertation, solid state alloying of binary oxide nanowires with solid and liquid precursors is studied to …

Image Analysis Of Colloidal Systems For Pair And Triplet Correlations., Brianna Price

Electronic Theses and Dissertations

Interactions among colloidal particles drive stability of suspensions or the assembly of particles into larger superstructures such as agglomerates or crystals. Typically, colloidal interactions are modeled using pairwise interaction potential energies which consider the interactions between pairs of particles. However, additional particles can modulate pair potentials, leading models to predict incorrect behavior. To analyze the effects of three-body interactions on the structuring of colloidal systems, pair and triplet correlation functions are calculated from published experimental data. These correlation functions are then translated into empirical pair and triplet potentials of mean force, which are then used to model systems more accurately …

Aqueous Redox Flow Batteries With Boron Doped Diamond As An Electrode., Alex M. Bates

Electronic Theses and Dissertations

As the interest and implementation of renewable energy accelerates, so does that of grid energy storage. It is widely believed that a cost-effective energy storage technology will bring about the proliferation of renewable energy. Redox flow battery (RFB) technology represents a promising solution to cost-effective grid energy storage. Compared to other technologies, RFBs have a long lifetime, high efficiency, are non-flammable, significantly reduce cost, and separately scale power and energy. The separation of power and energy enables increased energy capacity by simply adding electrolyte volume. Of the challenges facing RFB technology, one readily apparent is the cost of the active …

Non-Invasive Detection And Assessment Of Coronary Stenosis From Blood Mean Residence Times., Javad Hashemi

Electronic Theses and Dissertations

Coronary artery stenosis is an abnormal narrowing of a coronary artery caused by an atherosclerotic lesion that reduces lumen space. Fractional flow reserve (FFR) is the gold standard method to determine the severity of coronary stenosis based on the determination of rest and hyperemic pressure fields, but requires an invasive medical procedure. Normal FFR is 1.0 and FFR RT, to account for varying volume and flow rate of individual segments. Blood_RT was computed in 100 patients who had undergone the pressure-wire FFR procedure, and a threshold for Blood_RT was determined to assess the physiological significance of a stenosis, …

Stabilization Of Bimodal Colloidal Systems Via Nanoparticle Haloing In Microgravity., Luke Hawtrey

Electronic Theses and Dissertations

Colloidal suspensions typically contain a multi-phase system of solid particles suspended in a liquid medium. Colloids are widely used in industrial applications such as inks, paints, motor oils, foods, cosmetics, and many more. Colloidal systems are typically formed by the interaction of the attractive van der Waals forces and one or more repulsive forces. These repulsive forces include electrostatic repulsion, steric hindrance, and nanoparticle haloing. Nanoparticle Haloing (NPH) is a phenomenon discovered in 2001 as a viable method to stabilize colloidal systems of uncharged silica microparticles using highly charged zirconia nanoparticles. For this thesis the effects of NPH were tested …

Plasma-Assisted Liquid Phase Epitaxy Of Gallium Nitride Using Molten Gallium., Daniel Felipe Jaramillo-Cabanzo

Electronic Theses and Dissertations

Next generation semiconductor materials such as Gallium Nitride (GaN) and Silicon Carbide (SiC) are rapidly replacing Silicon (Si) for high power and high frequency applications due to Si’s inherent limitations. Despite the advantages of GaN over SiC, adoption of GaN has been hindered due to the lack of a cost-effective bulk production technique. Thus, the inability to precure native substrates requires GaN-based architectures to be heteroepitaxially synthesized on non-native substrates, such as sapphire and even SiC. This research seeks to develop a cost effective and scalable method to produce low defect, bulk GaN encouraging the adoption of GaN based devices …

Low Temperature Desiccants In Atmospheric Water Generation., Sunil Gupta

Electronic Theses and Dissertations

Surging global water demand as well as changes to weather patterns and over exploitation of natural water sources, such as ground water, has made potable water a critical resource in many parts of the World already – one rapidly heading towards a crisis situation. Desalination has been adopted as a solution – this is however energy intensive and impractical for most of the developing countries - those most in need of water. A renewable source of energy is solar thermal and solar photovoltaic. A plentiful source of water is the humidity in the atmosphere. This research is to push the …

Enhancing Performance Of Ionic Liquid Property Prediction With Molecular Dynamics., Trisha H. Patel

Electronic Theses and Dissertations

Molecular dynamics have been used to predict thermodynamic and transport properties of eight room-temperature ionic liquids. Simulation parameters including box size and van der Waals cutoffs were varied. The density, heat capacity, and self-diffusion coefficients of the ionic liquids were computed and compared to experimental data and to previously published simulations. Predicted properties were generally close to their experimentally observed values. It was determined that the prediction of ionic liquid properties via molecular dynamics simulations could be accelerated several-fold by using less stringent integration parameters and smaller simulation sizes. The properties of density and heat capacity did not change significantly …

Comparing Stenotic Blood Flow In Three- And Two-Dimensional Arterial Renderings Using Computational Fluid Dynamics And Multiphase Mean Age Theory., Jacob S. Garza

Electronic Theses and Dissertations

Over one million invasive coronary angiography procedures are performed annually in patients who experience chest pain or are known to have coronary artery disease. The procedure is carried out to ascertain the degree of arterial blockage (stenosis) that hinders blood flow to the heart. A cardiologist performing the procedure determines the physiological degree of a stenosis by either visual estimation, which is routine practice, or by invasively measuring fractional flow reserve (FFR), which is the current gold standard that has been demonstrated to improve patient outcomes and temper the cost of healthcare. Nevertheless, FFR is performed in only 10–20% of …

Sum Frequency Generation Spectroscopy Of Simulated Protein Secondary Structures., Andrew J. Adams

Electronic Theses and Dissertations

Sum frequency generation (SFG) spectroscopy is an experimental technique for differentiating between various conformations and orientations of interfacial proteins. Combining a theoretical framework for SFG with molecular dynamics (MD) simulations provides a powerful tool for studying systems containing interfacial proteins with applications in cell transport, biofilms, and fermentation processes. Roeters’ method was used to calculate theoretical SFG responses for a variety of individual α-helix and β-sheet peptide secondary structures simulated using MD. Results show how the shape and locations of SFG amide I responses change with differences in hydrogen bonding patterns, peptide orientations, and SFG polarization combinations. The data presented …

A Comparison Of Mean Age Theory And Residence Time Distributions In Mixed Systems., Nolan Theaker

Electronic Theses and Dissertations

A comparison between mean age theory and conventional residence time distributions over a range of quantified mixing levels was conducted using computational fluid dynamics (CFD). The system was a stirred tubular reactor. The model was validated by comparing computationally derived RTD curves with experimentally obtained RTD curves, with quantified differences less than 3%. Mixing was quantified using the Tanks-in-Series model. Mixing levels were set by varying flow rate and impeller rpm. Mean age distributions at the outlet, where experimental RTD’s were measured, were very narrow for all levels of mixing studied. RTD’s showed expected characteristics; a wider distribution and long …

Novel Processing Approaches For Thin Film Solar And Related Technologies., Brandon Lavery

Electronic Theses and Dissertations

A growing population along with developing nations are increasing the demand for energy. The International Energy Agency forecasts a global electricity demand increase of 70 percent by 2040. This is an increase from nearly 18 TW to over 30 TW. The sun can be a great clean source of achieving this energy demand. Despite the large solar industry development, the market is still growing as solar energy only accounted for 0.87% of the global energy production in 2013. The opportunity exists to manufacture more affordable solar energy that can penetrate more of the global energy market. In this dissertation, a …

Effect Of High Cationic Flocculant On Anaerobic Digestion Of Municipal Wastewater., Prathap D. John

Electronic Theses and Dissertations

Anaerobic digestion (AD) of municipal sludge is a widely used stabilization process at municipal wastewater treatment plants. It is highly effective in reducing sludge volume and produces methane gas which is used as fuel in the wastewater plant. Following digestion sludge is sent to a centrifuge to separate the solids from the liquids. Louisville MSD adds flocculent to material in the centrifuge to better coagulate the solids, thereby aiding in separation of the solids from the liquids. The potential for further AD, COD reduction, and methane generation of the liquid effluent from the centrifuge was unknown, particularly in regards to …

Novel Iii-V Alloys For Unassisted Water Splitting., Alejandro Martinez-Garcia

Electronic Theses and Dissertations

Direct conversion of solar energy to fuels by photoelectrochemical (PEC) water splitting has been identified as a promising route for sustainable power generation and storage. However, semiconductor materials with suitable opto-electronic properties have yet to be identified. In this dissertation, band gap engineering of III-V alloys, tuning the light sensitivity of GaP and GaN nitride through alloying Sb, is investigated for developing new semiconductor alloys with appropriate opto-electronic properties and their performance with overall water photoelectrolysis. In addition to III-V materials, copper oxide (Cu₂O) electrode was investigated for p-type semiconductor material. The new III-V alloy anodes were studied …

Data Driven Discovery Of Materials Properties., Fadoua Khmaissia

Electronic Theses and Dissertations

The high pace of nowadays industrial evolution is creating an urgent need to design new cost efficient materials that can satisfy both current and future demands. However, with the increase of structural and functional complexity of materials, the ability to rationally design new materials with a precise set of properties has become increasingly challenging. This basic observation has triggered the idea of applying machine learning techniques in the field, which was further encouraged by the launch of the Materials Genome Initiative (MGI) by the US government since 2011. In this work, we present a novel approach to apply machine learning …

Direct Band Gap Gallium Antimonide Phosphide (Gasbxp1-X) For Solar Fuels., Harry Benjamin Russell

Electronic Theses and Dissertations

Photoelectrochemical water splitting has been identified as a promising route for achieving sustainable energy future. However, semiconductor materials with the appropriate optical, electrical and electrochemical properties have yet to be discovered. In search of an appropriate semiconductor to fill this gap, GaSbP, a semiconductor never tested for PEC performance is proposed here and investigated. Density functional theory (DFT+U) techniques were utilized to predict band gap and band edge energetics for GaSbP alloys with low amount of antimony. The overall objective of this dissertation is to understand the suitability of GaSb_xP_1-x alloys for photoelectrochemical water splitting application. Specifically, …

Heat Transfer Mechanisms In Water-Based Nanofluids., Masoudeh Ahmadi

Electronic Theses and Dissertations

Nanofluids are a class of heat transport fluids created by suspending nano-scaled metallic or nonmetallic particles into a base fluid. Some experimental investigations have revealed that the nanofluids have remarkably higher thermal conductivities than those of conventional pure fluids and are more suited for practical application than the existing techniques of heat transfer enhancement using millimeter and/or micrometer-sized particles in fluids. Use of nanoparticles reduces pressure drop, system wear, and overall mass of the system leading to a reduction in costs over existing enhancement techniques. In this work, the heat transfer coefficient is determined experimentally using copper oxide (CuO) based …