Digital Commons Network^™

Quantification Of Heat Flows Through Building Entrance Doors On A Winter Day, Daeho Kang

Publications and Research

The current methods for the prediction of the heat flow through building entrance doors have been used for years while involved with a certain degree of uncertainty. This paper describes an experimental method that accurately quantified such heat flow. The experiment monitored local environmental parameters in a college building on a cold winter day. The results of the experiment demonstrated that the experimental method is viable to accurately estimate the heat flow throughout the entrance doors and the presence of a vestibule moderated heat losses from the conditioned area. The results will be used for validating the existing methods.

Surface Engineering Solutions For Immersion Phase Change Cooling Of Electronics, Brendon M. Doran

Master's Theses

Micro- and nano-scale surface modifications have been a subject of great interest for enhancing the pool boiling heat transfer performance of immersion cooling systems due to their ability to augment surface area, improve wickability, and increase nucleation site density. However, many of the surface modification technologies that have been previously demonstrated show a lack of evidence concerning scalability for use at an industrial level. In this work, the pool boiling heat transfer performance of nanoporous anodic aluminum oxide (AAO) films, copper oxide (CuO) nanostructure coatings, and 1D roll-molded microfin arrays has been studied. Each of these technologies possess scalability in …

Duocel Metal Foam Display Cases, Kate Goldsworthy, Katherina Prodanov, Benjamin Swanson, Syed Hasan

Mechanical Engineering

This Final Design Review (FDR) report outlines the senior design project that was conducted by a team of four mechanical engineering students at California Polytechnic State University-San Luis Obispo for ERG Materials and Aerospace Corporation. The goal of this project was to design displays that showcase the properties of ERG’s Duocel® foam at tradeshows and client meetings. To better understand the needs of our sponsor, the team researched Duocel®’s capabilities, related technologies, and relevant standards and regulations. With this information, we further defined the problem by creating a problem statement and a set of engineering specifications through a Quality Function …

Adding Semi-Structured Automated Grid Generation And The Menter-Shear Stress Turbulence Transport Model For Internal Combustion Engine Simulations To Novel Fem Lanl Combustion Codes, Brad Montgomery Philipbar

Mechanical Engineering ETDs

The addition of GridPro semi-structured, automated generation of grids for complex moving boundaries for combustion engine applications and the Menter Shear Stress Turbulent Transfer (SST) model are being developed by Los Alamos National Laboratory. The software is called Fast, Easy, Accurate, and Robust Continuum Engineering (FEARCE). In addition to improving the time and effort required to build complex grid geometry for turbulent reactive multi-phase flow in internal combustion engines, the SST turbulence model has been programmed into the Predictor Corrector Fractional-Step (PCS) Finite Element Method (FEM) for reactive flow and turbulent incompressible flow regime validation is performed. The Reynolds-Averaged Navier-Stokes …

Analytical Modeling And Life Cycle Assessment Of A Solar Powered Vapor Absorption Cooling System, Harold A. Walters

Electronic Theses and Dissertations

Vapor absorption cooling systems (VACS) offer an environmentally friendly alternative to the standard vapor compression cooling systems (VCCS) for cooling homes, businesses, factories, and other buildings. VACS use low-grade thermal energy to achieve a cooling effect and require minimal electrical input for the liquid solution pump used for circulation within the system. The thermal energy which powers these systems can be provided through several means; one popular form is through the use of solar thermal collectors. This paper provides a process for determining the overall size and configuration of the VACS depending upon the operating conditions of selected components. A …

Laser Ablation Of Aluminum, Erika Nosal, Zachary Rahe, Arthur Pamboukis

Williams Honors College, Honors Research Projects

The laser ablation of metal carries relevance in a variety of engineering industries. This includes, but is not limited to, processes such as micromachining, or implementation on aircraft weaponry. The latter application is the reasoning for why aluminum is the specific metal in consideration, as it is commonly used for the construction of aircraft components.

The scope of this project was to optimize the energy dispersed through laser ablation on aluminum by mathematical modeling. The transient conduction process in the aluminum was modeled using a 2-dimensional cylindrical coordinate system in both MATLAB and ANSYS/Fluent. These models were adopted to simulate …

Experimental And Numerical Study Of The Stirling Engine Robust Foil Regenerator, Koji Yanaga

Graduate Theses, Dissertations, and Problem Reports

The regenerator is located between the heat accepter and the heat rejecter of the Stirling engine. It works as a thermal energy storage component in the engine. Most of the regenerators are made of woven screen or random fiber. However, the flow going through the woven screen or random fiber is similar to the cylinders in crossflow which has flow separation. To achieve higher engine efficiency, it is required to design a regenerator which has higher convective heat transfer, lower pressure drops. Therefore, a parallel channel regenerator called a robust foil regenerator was designed and manufactured.

In this study, a …

Investigation Of Heat Exchanger Effectiveness Using A Surface Coating Technology, Allen Duffy

Graduate Theses, Dissertations, and Problem Reports

Diesel engine manufacturers continue to improve engine performance through increased thermal efficiency and reduced regulated emissions. The aftercooler located between the turbocharger air outlet and intake manifold experiences a wide range of operating conditions. Improving the heat transfer characteristics in the aftercooler can lead towards improved engine performance through increased charge air density. A surface coating has been proposed to enhance the heat transfer characteristics for a marine-based application on the water - side of the heat exchanger. To evaluate the efficacy of the coating, the rate of heat transfer with and without the coating was quantified in a controlled …