Digital Commons Network^™

Investigation Of The Performance Of Flexible Pavement Systems Under Moving Loads Using Finite Element Analyses, Dona Jacqueline Johnson

Theses and Dissertations

The introduction of larger and heavier aircraft with more complex wheel configurations is making the current design methods inadequate for airfield pavements. In addition, airport pavements experience significant wander. However, the effect of wander on airport pavement performance has not been evaluated. In previous studies, the stress interactions between each tire of a triple-dual-tandem (TDT) axle used on B-777 and A380 aircraft cannot be captured using a two-dimensional model. In addition, many of these studies have assumed a linear-elastic material behavior of the pavement layers.

The purpose of this study is to conduct a three-dimensional finite element analysis to quantify …

Dynamic Properties Of Railway Track And Its Components : A State-Of-The-Art Review, Sakdirat Kaewunruen, Alexander Remennikov

Faculty of Engineering - Papers (Archive)

Recent findings indicate one of major causes of damages, which is attributed to the resonant behaviours, in a railway track and its components. Basically, when a railway track is excited to generalised dynamic loading, the railway track deforms and then vibrates for certain duration. Dynamic responses of the railway track and its components are the key to evaluate the structural capacity of railway track and its components. If a dynamic loading resonates the railway track’s dynamic responses, its components tend to have the significant damage from excessive dynamic stresses. For example, a rail vibration could lead to defects in rails …

Energy Conservation In The Trinidad Tourist Industry Training Program, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

This Final Report summarizes the work performed by the Florida Solar Energy Center/University of Central Florida on the contract entitled "Energy Conservation in the Trinidad Tourist Industry Training Program". This program was performed for the Ministry of Tourism, Trinidad and Tobago, WI. (MoTTT) for the period September 1 to November 1, 2008. The MoTTT established a program for the tourist industry to facilitate learning about energy conservation and renewable energy technologies appropriate for resort applications on the Island of Trinidad. The Florida Solar Energy Center provided assistance through consulting, in education about energy technologies. FSEC modified existing energy training courses …

Attitude Estimation And Maneuvering For Autonomous Obstacle Avoidance By Miniature Air Vehicles, James K. Hall

Theses and Dissertations

Utilizing the Euler-Rodrigues symmetric parameters (attitude quaternion) to describe vehicle orientation, we develop a multiplicative, nonlinear (extended) variation of the Kalman filter (MEKF) to fuse data from low-cost sensors. The sensor suite is comprised of gyroscopes, accelerometers, and a GPS receiver. In contrast to the common approach of using the complete vehicle attitude as the quantities to be estimated, our filter states consist of the three components of an attitude error vector. In parallel with the time update of the attitude error estimate, we utilize the gyroscope measurements for the time propagation of the attitude quaternion. The accelerometer and the …

Characterization Of The Thermal Transport Through A Temporally-Varying Ash Layer, Darron Palmer Cundick

Theses and Dissertations

Ash deposits in commercial coal-fired boilers frequently pose serious maintenance challenges and decrease thermal efficiency. A better understanding of fundamental thermal transport properties in ash deposits can help mitigate their negative effects. In order to characterize the thermal properties of boiler-side deposits, this work presents a thermal transport model and in-situ measurements of effective thermal conductivity in coal ash deposits. A simple model of the thermal transport through an ash deposit, with and with out slagging, was developed. The model approximates the deposit by dividing it into four regimes: particulate, sintered, solidified slag, and molten slag. The development of this …

Green And High Performance Factory Crafted Housing, Florida Solar Energy Center, Stephanie Thomas-Rees

FSEC Energy Research Center®

In the U.S., factory-built housing greater than 400 square feet is built either to the U.S. Department of Housing and Urban Development (HUD) code for mobile homes or site-built codes for modular housing. During the last few years, as the production of HUD code housing has dwindled, many leading edge factory builders have started building modular homes to compete with site-built housing and stay in business. As part of the Building America Industrialized Housing Partnership (BAIHP) we have assisted in the design and construction of several 'green' and high performance modular homes that Palm Harbor Homes, Florida Division (PHH) has …

An Overview Of Building America Industrialized Housing Partnership (Baihp) Activities In Hot-Humid Climates, Florida Solar Energy Center, Subrato Chandra

FSEC Energy Research Center®

BAIHP (www.baihp.org ) conducts systems research and technical assistance activities for new housing. Hot-humid climate efforts described here include:

Systems research: NightCool – A hybrid cooling and dehumidification strategy employing radiative cooling and desiccant materials. Interior Duct Systems in Manufactured Houses – Tests are ongoing in an occupied prototype home in Alabama and the FSEC manufactured housing lab. Ventilation and Dehumidification – A new strategy has been developed to hook up a whole-house dehumidifier so that it only runs when the air conditioning compressor is off. Plug Load Reduction – Whole house feedback devices and security system based plug load …

Energy Impacts Of Various Residential Mechanical Ventilation Strategies, Florida Solar Energy Center, Robin Vieira

FSEC Energy Research Center®

The Building America program has been working with home builders for more than a decade using a variety of strategies for bringing fresh air into the homes. Many of these strategies utilize the central air handler fan from the HVAC system to ventilate when the system runs. Controllers can be purchased to force the air to enter for minimum periods of time or to shut off outside air dampers after some period of runtime. EnergyGauge USA, a detailed hourly residential simulation program, has been modified to simulate the various runtime strategies, as well as supply- or exhaust-only ventilation strategies and …

Assessment Of The Effectiveness And Energy Efficiency Of Humidity Control Approaches In Vacant Florida Homes, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

In a hot and humid climate such as Florida, 'snowbirds' that leave their homes for extended summer periods need guidance on effective and energy efficient methods of humidity control. Experiments were performed in seven residences to evaluate various approaches to humidity control, including providing no mechanical system control. A humidity target was identified to maintain indoor relative humidity (RH) at 65% or lower most of the time. Providing no mechanical conditioning (letting the building 'float') yields relative humidity at 65% or below during hot and sunny weather in some homes, but not during cloudy weather. Setting the AC system thermostat …

Research Results From A Few Alternate Methods Of Interior Duct Systems In Factory Built Housing Located In The Hot Humid Climate, Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The U.S. Department of Energy's (DOE) Building America Industrialized Housing Partnership (BAIHP) has collaborated with two of its industry partners to work on a portion of the project that relates to the construction and evaluation of prototype interior duct systems. In 2006, work began on a duct system design that would locate the entire length of duct work within the air and thermal barriers of the envelope. One of these designs incorporated a high-side supply register that connects to the conventional floor duct. The other design utilized a single soffit located within the conditioned space at the marriage line. The …

Ac System Equipment Specification, Installation And Operational Options For Improved Indoor Humidity Control, Florida Solar Energy Center, Don B. Shirey Iii

FSEC Energy Research Center®

High-efficiency home designs have significantly reduced sensible cooling loads, and some building codes and IAQ standards have begun requiring continuous outdoor ventilation air. These trends have led to an increased prevalence of high indoor humidity conditions (Rudd and Henderson 2007). This paper presents a summary of low-cost or no-cost equipment selection and operation options for conventional residential air-conditioning equipment than can result in lower indoor humidity levels. These options should be evaluated and employed to the extent possible prior to considering the added first cost and operating costs of separate dehumidification equipment.

Case Study Of An Innovative Hvac System With Integral Dehumidifier, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

In most applications, heating, ventilating, and air conditioning (HVAC) equipment is controlled to maintain an indoor dry-bulb set point temperature. Moisture removal by the HVAC system is considered to be an operational byproduct. During summer months, the operation of the HVAC system is usually sufficient to meet both the sensible and latent cooling loads. However, during other times of the year when sensible loads are reduced, the moisture load can be significantly higher than the available moisture removal capacity of the air conditioning system. This can lead to elevated indoor relative humidity levels and an uncomfortable indoor environment. In many …

Energy Performance Aspects Of A Florida Green Roof, Part 2, Florida Solar Energy Center, Jeffrey Sonne

FSEC Energy Research Center®

This monitored study is an evaluation of summer and winter energy performance aspects of a green roof on a 2-story central Florida university building addition that was completed in 2005. An earlier report on this study was published through the 2006 Symposium on Improving Building Systems in Hot and Humid Climates. This report reviews these earlier results and provides second-summer results which show significant performance improvements for the green roof compared with the first summer results.

Variable-Thickness Boundary Layers For Sliding Mode Control, Chyun-Chau Fuh

Journal of Marine Science and Technology

Sliding mode control is a nonlinear feedback control technique which provides good robustness against modeling uncertainties and external disturbances. However, as the uncertainties or disturbances increase, a greater control input is required, and the control signal may cause an undesirable chattering phenomenon. In general, the further the system trajectory from the origin, the more violent the chattering effect. However, as the trajectory moves closer to the origin, the degree of chattering gradually reduces. As a result, even if an attempt is made to eliminate chattering by introducing a small constant boundary layer around the sliding surface, the chattering phenomenon may …

Study On Mechanical Properties Of A356 Alloys Enhanced With Preformed Thixotropic Structure, Shueiwan H. Juang, Shyh-Ming Wu

Journal of Marine Science and Technology

A preformed A356 alloys with thixotropic structure (designated SSM-A356) was systematically studied on mechanical properties in order to establish the database for further investigations in forming and heat treatment. Because of the specific microstructure and characteristics, the heat treatment conditions of SSM-A356 were explored through the observations of microstructure and the measurement of micro-hardness. In the investigation of heat treatment, it was observed that the eutectic silicon was refined and spheroidized which is unlikely for conventional processing. The mechanical testing results showed that the yield and ultimate tensile strength of SSM-A356 were respectively around 115% and 34% greater than those …

Investigation Of Heterogeneity Of Fsw Inconel 718 Coupled With Welding Thermal Cycle, Dong Fang Huang

Theses and Dissertations

In order to develop a better understanding of the property, microstructure evolution and thermal history of FSW Inconel 718's, the strain, strain rate and thermal cycles need to be determined. In order to estimate the strain field of a deformed body, a displacement function needs to be determined. A 3D deformation model was developed to determine the displacement coefficients. A rectangular box created in this model deforms following a linear displacement function. Three orthogonal planes cut this deformed box, which leads to three deformed planes. The shape parameters (L, H, θ¹ and θ²) on the three orthogonal planes can be …

The Effect Of Liquid Hot Filling Temperature On Blow-Molded Hdpe Bottle Properties, Benjamin S. Hudson

Theses and Dissertations

The occurrence of deformation in plastic bottles is a common problem in the bottling industry where bottles are blow molded, hot filled at high temperatures and sealed. Plastics have unique properties that make it difficult to predict when and why such changes may occur. The root cause of such deformation is unknown by many bottle producers and recent attempts have been made to minimize the occurrence of such defects. The purpose of this research is to determine which variables involved in the bottle production process influence bottle shape. Earlier variables that were tested included both blow molding resin and total …

Label-Free Mapping Of Near-Field Transport Properties Of Micro/Nano-Fluidic Phenomena Using Surface Plasmon Resonance (Spr) Reflectance Imaging, Iltai Kim

Doctoral Dissertations

My doctoral research has focused on the development of surface plasmon resonance (SPR) reflectance imaging technique to detect near-field transport properties such as concentration, temperature, and salinity in micro/nano fluidic phenomena in label-free, real-time, and full-field manner. A label-free visualization technique based on surface plasmon resonance (SPR) reflectance sensing is presented for real-time and full-field mapping of microscale concentration and temperature fields. The key idea is that the SPR reflectance sensitivity varies with the refractive index of the near-wall region of the test mixture fluid. The Fresnel equation, based on Kretschmann’s theory, correlates the SPR reflectance with the refractive index …

A New Set-Up To Measure The Viscoelastic Properties Of Porous Media Using A Specific Electrodynamic Transducer, Dauchez Nicolas, Olivier Doutres Ph.D., Jean-Michel Génevaux, Guy Lemarquand

Olivier Doutres Ph.D.

A new method for measuring viscoelastic properties of sound absorbing materials is presented. This method is derived from the quasistatic method using a loudspeaker as actuator and sensor. Previous results carried out with a traditional electrodynamic loudspeaker were limited to 100 Hz because of transducer nonlinearities. In this paper, viscoelastic properties are determined up to 500 Hz due to the design of a specific loudspeaker devoid of the main nonlinearities.

Hydraulic Actuated Automotive Cooling Systems - Nonlinear Control And Test, John Wagner, M H. Salah, P M. Frick, D M. Dawson

Publications

The replacement of traditional automotive mechanical cooling system components with computer controlled servo-motor driven actuators can improve temperature tracking and reduce parasitic losses. The integration of hydraulic actuators in the engine cooling circuit offers greater power density in a smaller package space when compared with electric actuators. In this paper, a comprehensive nonlinear backstepping robust control technique is developed to regulate the engine coolant temperature by controlling a hydraulic coolant pump and radiator fan. An experimental test bench has been assembled to investigate the hydraulic automotive thermal system performance. Representative numerical and experimental results are presented and discussed. Overall, the …

Detection Of Voids In Prestressed Concrete Bridges Using Thermal Imaging And Ground-Penetrating Radar, David G. Pollock, Kenneth J. Dupuis, Benjamin Lacour, Karl R. Olsen

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Thermal imaging and ground-penetrating radar was conducted on concrete specimens with simulated air voids. For the thermal imaging inspections, six concrete specimens were constructed during the month of June 2007 to simulate the walls of post-tensioned box girder bridges. The objective was to detect simulated air voids within grouted post-tensioning ducts, thus locating areas where the post-tensioning steel strands are vulnerable to corrosion. The most important deduction taken from these inspections was that PT-ducts and simulated voids were more detectable in the 20 cm (8 in.) thick specimens than in the 30 cm (12 in.) thick specimens. While inspections of …

Experiments And Models For The Thermal Response Of Railroad Tapered-Roller Bearings, Constantine M. Tarawneh, Kevin D. Cole, Brent M. Wilson, Fadi Alnaimat

Department of Mechanical and Materials Engineering: Faculty Publications

The need to understand and quantify the heat transfer paths within tapered-roller bearings is of great importance in the railroad industry since bearing cup temperature measurement is the primary tool utilized in the removal of distressed bearings from service. Experiments were performed to acquire temperature histories at several locations on a stationary bearing subjected to heat sources imbedded in two rollers. The experimental results were compared to zero- and first-order thermal models to estimate overall heat transfer coefficients from the bearing. The results presented here can be used to explain some of the mechanisms that lead to overheating of tapered-roller …

Angles-Only Navigation For Autonomous Orbital Rendezvous, David Charles Woffinden

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The proposed thesis of this dissertation has both a practical element and theoretical component which aim to answer key questions related to the use of angles-only navigation for autonomous orbital rendezvous. The first and fundamental principle to this work argues that an angles-only navigation filter can determine the relative position and orientation (pose) between two spacecraft to perform the necessary maneuvers and close proximity operations for autonomous orbital rendezvous. Second, the implementation of angles-only navigation for on-orbit applications is looked upon with skeptical eyes because of its perceived limitation of determining the relative range between two vehicles. This assumed, yet …

Development Of A Mathematical Model For 3d Reconstruction Of Target Objects By Photogrammetry, Keith F. Blonquist

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis outlines the development of a mathematical model which can be used to perform 3D reconstruction of a target object from surveillance images. 3D reconstruction is a common procedure in photogrammetry, but performing 3D reconstruction from surveillance images can be more difficult than typical photogrammetry applications.

Surveillance images are generally captured in an unsystematic manner because there is no control over the target that is being photographed. Surveillance images can have a wide variety of fields of view, are often captured with uncalibrated cameras, and typically the targets are objects for which there is no other a priori information. …

Particle Characterization And Concentration Using Aerodynamic Vectoring, Zac Humes

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

An experimental demonstration of a new, non-contact particle characterization technique called Aerodynamic Vectoring Particle Sorting (AVPS) is presented. AVPS uses secondary blowing and suction control flows-flows that are a fraction of the jet flow rate-to sharply change the direction of a planar, particle-laden jet. As the jet is vectored, particles present in the flow experience a resultant drag force, dependent upon their size, that balances inertia. Since this balance determines the particle's trajectory, vectoring the flow leads to a separation of particles downstream. This simple, low-pressure-drop sorting technique classifies particles with less risk of damage or contamination than currently available …

Modeling, Designing, Fabricating, And Testing Of Channel Panel Flat Plate Heat Pipes, James R. Harris

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Flat plate heat pipes are very efficient passive two-phase heat transport devices. Their high efficiency and low mass are desirable in the aerospace and electronics industries. The highly competitive nature of the thermal management industry results in little awareness of the capabilities of at plate heat pipes, which has resulted in only a few applications of the technology. In the year 2000 a research and development project sponsored by Space Dynamics Laboratory was launched to investigate building carbon-based at heat pipes. The flat configuration is desireable to incorporate many components onto one thermal management system. Development led to the adoption …

Variational Asymptotic Micromechanics Modeling Of Composite Materials, Tian Tang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The issue of accurately determining the effective properties of composite materials has received the attention of numerous researchers in the last few decades and continues to be in the forefront of material research. Micromechanics models have been proven to be very useful tools for design and analysis of composite materials. In the present work, a versatile micromechanics modeling framework, namely, the Variational Asymptotic Method for Unit Cell Homogenization (VAMUCH), has been invented and various micromechancis models have been constructed in light of this novel framework. Considering the periodicity as a small parameter, we can …

Fabrication Of Long-Fiber-Reinforced Metal Matrix Composites Using Ultrasonic Consolidation, Yanzhe Yang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This research is a systematic study exploring a new fabrication methodology for long-fiber-reinforced metal matrix composites (MMCs) using a novel additive manufacturing technology. The research is devoted to the manufacture of long-fiber-reinforced MMC structures using the Ultrasonic Consolidation (UC) process. The main objectives of this research are to investigate the bond formation mechanisms and fiber embedment mechanisms during UC, and further to study the effects of processing parameters on bond formation and fiber embedment, and the resultant macroscopic mechanical properties of UC-made MMC structures.

From a fundamental research point of view, bond formation mechanisms and fiber embedment mechanisms have been …

Generation And Analysis Of Fcg Data Using A Single Specimen And Kmax - ∆K Testing Matrix, Sree Phani Chandar Reddy

Masters Theses

A custom method to generate fatigue crack growth (FCG) data requires testing of multiple specimens at different load ratios. In addition, it includes the application of a load shedding procedure from pre-cracking level to threshold.

In this thesis, a novel method of testing has been investigated that utilizes a single specimen and a testing matrix in terms of K_maxand ∆K values corresponding to predetermined R-ratios for which FCG data, da/dN, are recorded. Automatic K-controlled tests on 2324-T39 Al alloy were conducted using the ∆K increasing and ∆K decreasing procedures while K_maxwas kept constant. Results show that …

An Object-Oriented Approach For Modeling And Simulation Of Crack Growth In Cyclically Loaded Structures, D. Cojocaru, Anette M. Karlsson

Mechanical Engineering Faculty Publications

We present an object-oriented modeling frame for simulating crack propagation due to cyclic loadings. Central to the approach is that the crack propagates when a user-defined propagation criterion is fulfilled, i.e., the crack propagation rate is not prescribed but predicted. The approach utilizes the commercial finite element software package ABAQUS and its associated Python based scripting interface. The crack propagation is simulated by a generalized node release technique. If the propagation criteria are satisfied in the end of a cycle, the crack is allowed to propagate. The incremental crack growth is inferred from an iterative investigation of the propagation criteria. …