Digital Commons Network^™

Modeling And Simulation Of The Thermoforming Process In Thermoplastic-Matrix Composite Materials, Philip M. Bean

Electronic Theses and Dissertations

Thermoplastic-matrix composite materials have unique advantages over traditional thermosets including faster processing, improved fracture toughness, and recyclability. These and other benefits have caused increasing interest in the use of these materials in both aerospace and automotive industries. Due to the differences in behavior, these materials require a different type of manufacturing process to thermoset matrix composites. This manufacturing process generally involves using pre manufactured tape-layers. These layers, containing both thermoplastic-matrix and fiber-reinforcement, are aligned to the desired orientation, and stacked up into a “tailored blank” using an automated tape layup machine. They are then heated to the thermoplastic melting temperature …

Cfd Modeling Of Smoke Movement In An Atrium, Robin Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this paper is to better understand the behavior of smoke movement in an atrium. Thus gives first responders and civilians in and out of building a better understanding

With the advancements of modern technology, computers and softwares make simulation models possible such as fire models to simulate fire and smoke movements. In this paper, a computational fluid dynamic (CFD) software Fire Dynamic Simulator (FDS) is used to conduct a series of atrium tests to investigate the effectiveness of smoke exhaust systems. FDS solves the Navier-Stokes equations appropriate for low speed flows (Ma < 0.3) with an emphasis on smoke, heat transport and CO2 concentrations from fires. The default turbulence model used in FDS simulation is the Large Eddy Simulation (LES), which is the solution of Navier-Stokes equations at low speed.

The compartment tested was 9 …

A Scalable, Chunk-Based Slicer For Cooperative 3d Printing, Jace J. Mcpherson

Computer Science and Computer Engineering Undergraduate Honors Theses

Cooperative 3D printing is an emerging technology that aims to increase the 3D printing speed and to overcome the size limit of the printable object by having multiple mobile 3D printers (printhead-carrying mobile robots) work together on a single print job on a factory floor. It differs from traditional layer-by-layer 3D printing due to requiring multiple mobile printers to work simultaneously without interfering with each other. Therefore, a new approach for slicing a digital model and generating commands for the mobile printers is needed, which has not been discussed in literature before. We propose a chunk-by-chunk based slicer that divides …

Translating Data From The Laboratory Into Simulation: A Computational Framework For Subject-Specific Finite Element Musculoskeletal Simulation, Donald R. Hume

Electronic Theses and Dissertations

Computational modeling is a powerful tool which has been used to inform decisions made by engineers, scientists, and clinicians for decades. Musculoskeletal modeling has emerged as a computational modeling technique used to understand the interaction between the body and its surroundings. There are several common approaches used for musculoskeletal modeling which take advantage of different model formulations to obtain information of interest. Unfortunately, models with different joint formulations inherit disparities in representations of ligament, muscle, and cartilage at joints of interest. These differences affect the way the joint functions and limit the insight it provides through computational analysis. Musculoskeletal models …

Towards Better Understanding Of Failure Modes In Lithium-Ion Batteries: Design For Safety, Alex B. Francis

Theses and Dissertations

In this digital age, energy storage technologies become more sophisticated and more widely used as we shift from traditional fossil fuel energy sources to renewable solutions. Specifically, consumer electronics devices and hybrid/electric vehicles demand better energy storage. Lithium-ion batteries have become a popular choice for meeting increased energy storage and power density needs. Like any energy solution, take for example the flammability of gasoline for automobiles, there are safety concerns surrounding the implications of failure. Although lithium-ion battery technology has existed for some time, the public interest in safety has become of higher concern with media stories reporting catastrophic cellular …

Connected Alerts Across Manufacturing Facilities, Jordan J. Moy

Industrial and Manufacturing Engineering

The lack of communication during a large project can result in costly delays when striving to achieve previously defined benchmarks. Often times, each part of a project will require verification from an employee of a specified area of expertise before being allowed to advance to the next stage. Finding these individuals can be extremely hard due to the large, spread out campus of manufacturing facilities as well as the numerous projects the company is concurrently working on. These floor support requests can sometimes take from an hour to even a whole work day, causing major delays in the production schedule. …

The Design, Modeling, And Optimization Of A Biomimetic Soft Robot For Fluid Pumping And Thrust Generation Using Electroactive Polymer Actuators, Zakai Jedidiah Olsen

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nature is a constant source of inspiration for engineers and scientists through its simple, effective, and elegant solutions to many complex problems. Smart materials and soft robotics have been seen to be particularly well suited for developing biomimetic devices and are active fields of research. In this study, the design, modeling, and optimization of a new biomimetic soft robot is described. Preliminary work was made in the modeling of a biomimetic robot based on the locomotion and kinematics of jellyfish. Modifications were made to the governing equations for jellyfish locomotion that accounted for geometric differences between biology and the robotic …

Simulation Of An Ethylene Flame With Turbulence, Soot And Radiation Modeling, Santu Golder

Electronic Theses and Dissertations

This thesis will investigate soot models that are available in commercial codes. We will look at the effect of turbulence models, gravity, soot models and radiation. Simulations will be compared to Coppalle and Joyeux [1]. The flame is an ethylene air diffusion flame at a Reynolds number of 5700. Simulations show the SST turbulence model, one-step soot model and Rosseland radiation model including gravity agree well with experimental data (temperature and soot). Flamelet soot modeling from Carbonell et al. [2] and flamelet radiation modeling from Doom [3] has been incorporated and compared as well.

Investigation Of Microstructure And Mechanical Properties By Direct Metal Deposition, Jingwei Zhang

Doctoral Dissertations

"Microstructure and properties of Direct Metal Deposition (DMD) parts are very crucial to meeting industrial requirements of parts quality. Prediction, and control of microstructure and mechanical properties have attracted much attention during conventional metal manufacturing process under different conditions. However, there is few investigations focused on microstructure simulation and mechanical properties control under different process parameters during DMD process. This dissertation is intended to develop a multiscale model to investigate Ti6Al4V grain structure development and explore Ti6Al4V based functionally graded material (FGM) deposit properties during DMD process. The first research topic is to investigate and develop a cellular automaton-finite element …

Kinesthetic Learning Experience Simulation Using An Online Intervention To Improve Hands-On Ability, David Leach

Dissertations, Master's Theses and Master's Reports

Students enrolled in mechanical and manufacturing engineering programs employ differing levels of mechanical aptitude and practical hands-on ability. Many students lack practical experience tinkering with mechanical devices and mechanisms prior to entering their post-secondary years. Student attention spans in traditional classroom environments appear to be decreasing with the ever-increasing addiction to immediate gratification provided by electronic devices, gaming software, and social media platforms. The question is then raised whether or not modern engineering students have the ability to improve mechanical aptitude by simulating a kinesthetic or tactile learning experience through an online tutorial. This project describes the development and testing …