Digital Commons Network^™

Investigations Of The Negative Temperature Coefficient Region Of Sustainable Aviation Fuels For Mitigation Of Global Warming, Richard C. Smith Iii

Honors College Theses

An investigation was led to determine the correlations between the durations of Ignition Delay (ID), Combustion Delay (CD), Derived Cetane Number (DCN), Negative Temperature Coefficient (NTC), Low-Temperature Heat Release (LTHR) regions, ringing intensity, and precent mass burn, and the effect of blending the Fischer-Tropsch (F-T) synthetic aerospace fuel (SAF), iso-paraffinic kerosene (IPK), with petroleum derived Jet-A aerospace fuel on these regions. Neat blends of Jet-A and IPK and three by mass blends of the fuels will be researched. These blends include mass percentages of 75%Jet-A and 25%IPK (75Jet-A25IPK), 50%Jet-A 50%IPK (50Jet-A50IPK), and 25%Jet-A 75%IPK (25Jet-A75IPK). The study will utilize a …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Viking Ax Cast by Students

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Dr. Cesmeci Awarded $1.1 mil DOE Grant
• Dr. Cesmeci Seeking to Student Researchers for DOE Grant

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Undergrad Researcher to Present at National Conference

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• ME Student to Compete on Netflix’s Baking Impossible

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• ASME Hosts Seminar on ANSYS Simulation

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Mechanics Course Sequence Review Sessions (Statics, Dynamics, Mechanics, Machine Design)

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Department Hosts Summer Camp for HS Students

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Two Student Researchers Receive Engineering Awards

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Alumnus Receives PE Licensure

Nze Residential Test Facility Analysis Throughout Summer/Winter Peak Months For Thermal Comfort Prediction, Yearim Yang

Honors College Theses

The present study evaluates the thermal comfort in the east bedroom of the Net-Zero Energy Residential Test Facility (NZERTF) in a mixed-humid climate. This unit was constructed by the National Institute of Standards and Technology for scholars to analyze its energy performance and indoor environmental quality. The thermal comfort is investigated in a designated bedroom space by analyzing 27 dry-bulb temperature, 4 airspeed, 6 globe temperature, and 6 relative humidity sensors in a 3x3x3 array and a center sensor stand during two opposite seasonal months (July and December). The conventionally ducted heat pump, small duct high velocity, and heat recovery …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Graduate Student Wins Excellence in Graduate Research Award

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Faculty and Students Mentor High School Design Competition

Analysis Of Data To Evaluate The Performance Of Air Filters Used For Filtering Nanoscale Particles Generated By Smoke, Pascal J. Wagemaker

Honors College Theses

The main goal of this research project is to determine the effectiveness of commercially available air filters and to compare different kinds of commercially available air filters in certain categories. With recent record-breaking wildfires and the Covid-19 pandemic, research on the effects and features of nanoparticles has become increasingly important. Inhalation of nanoparticles in smoke can result in severe health effects on humans, affecting especially the respiratory system. As nanoparticles can pass through cell membranes, absorption occurs rapidly and affects many different parts and functions of the human body. While air filters are an effective method of reducing small-sized particles …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Graduate Student to Present at Posters on the Hill

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• 2021 Engineering Design Challenge

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering News (2013-2023)

• Graduate Student Lands Position as Race Engineer

A Semi-Active Vibration Isolator For 3d Printing On Shipboard, Mohammad Z. Shahabuddin

Electronic Theses and Dissertations

In the recent years, additive manufacturing (AM) (aka 3D printing)-has become a viable alternative to traditional manufacturing due to its unique advantages, such as enabling the fabrication of complex geometries at reduced weight and costs as well as allowing on-site fabrication for maintenance and repair. One specific application area of the AM is the navy vessels. During extended voyages, the navy vessels likely require the convenience of on-site fabrication of the malfunctioned parts. However, the shipboard equipment suffers from a broad range of external excitations arising not only from the waves but also from the vessel’s engines, which …

Quality Assurance Of Lightweight Structures Via Phase-Based Motion Estimation, Ikenna E. Ifekaonwu

Electronic Theses and Dissertations

In recent years, lightweight structures have become mature and adopted in various applications. The importance of quality assurance cannot be overemphasized hence extensive research has been conducted to assess the quality of lightweight structures. This study investigates a novel process that exploits motion magnification to investigate the damage characteristics of lightweight mission-critical parts. The goal is to assure the structural integrity of 3D printed structures and composite structures by determining the inherent defects present in the part by exploiting their vibration characteristics. The minuscule vibration of the structure was recorded with the aid of a high-speed digital camera, and the …

The Development Of A Holistic Quality Score Using In-Situ Monitoring Of Laser Powder Bed Fusion, Ryan Daigneault

Electronic Theses and Dissertations

Additive manufacturing processes allow for a great degree of flexibility in terms of part production. The process is autonomous once the part has started printing in that the operator generally does not need to intervene until the part is finished. One issue that this introduces, however, is an inability to determine part quality during the printing process. Once a part has started printing, the operator must either wait until the part is finished or regularly check on the part during the print to determine the part quality. Using data gathered from multiple sensors, a quality score can be used to …

Reclamation Of Fused Silica From Investment Shells Used For Casting Steel, Samuel L. Holt

Electronic Theses and Dissertations

Fused silica is widely used for investment casting shell molds. Fused silica shells are discarded after being used for casting one time. This is due to the transformation of fused silica to beta cristobalite above 1652℉ (900℃). To reduce cost and waste of investment casting foundries, this study is exploring a method to inhibit transformation of fused silica and reclaim it from high temperature investment casting shells. This research has employed firing to minimalize fused silica transformation to cristobalite. The phase transformation is minimalized due to sintering and coarsening of the particles during firing. Coarsening reduces surface area to volume …

Experimental And Numerical Investigation Of Naca Airfoil Wing With Winglets, Courtney Danielle Bachmann

Electronic Theses and Dissertations

This research was performed in order to study wingtip devices and, in particular, winglets. Winglets are attached to commercial aircraft for the purpose of reducing induced drag caused by wake vortices on the wingtip. A winglet device can save an aircraft anywhere from 3-7% in fuel consumption. Over the course of a year, this can add up to hundreds of thousands of dollars saved. This research consisted of two parts: one part experiment and one part equipment design. The latter phase of this research examined various methods of testing in a subsonic wind tunnel laboratory setting. Experimental results found with …

Design Of Compact Signal Distribution Device For Hoffman Reflex Methodologic Applications In Sports Medicine, Abayomi E. Folaranmi

Electronic Theses and Dissertations

A study is presented on the design of compact sized signal distribution device for Hoffman reflex methodological applications in sports medicine. Established conventional method for measuring and recording human or animal nervous system response to external electrical stimulus was considered in this study. Challenges with measuring and recording techniques which introduces inaccuracies and unreliability of reflex response data obtained was analyzed, this work is aimed at improving the reliability of H-reflex d measuring and recording technique for the purpose of reducing inaccuracies introduced to data obtained because of conventional methodologic approach. Inaccuracies due to changes in subject muscle geometry and …

In-Situ Process Monitoring For Metal Additive Manufacturing (Am) Through Acoustic Technique, Md Shahjahan Hossain

Electronic Theses and Dissertations

Additive Manufacturing (AM) is currently a widely used technology in different industries such as aerospace, medical, and consumer products. Previously it was mainly used for prototyping of the products, but now it is equally valuable for commercial product manufacturing. More profound understanding is still needed to track and identify defects during the AM process to ensure higher quality products with less material waste. Nondestructive testing becomes an essential form of testing for AM parts, where AE is one of the most used methods for in situ process monitoring. The Acoustic Emission (AE) approach has gained a reputation in nondestructive testing …

Design And Development Of Soft Earthworm Robot Driven By Fibrous Artificial Muscles, Beau Ragland

Electronic Theses and Dissertations

Earthworm robots have proven their viability in the fields of medicine, reconnaissance, search and rescue, and infrastructure inspection. These robots are traditionally typically hard-shelled and must be tethered to whatever drives their locomotion. For this reason, truly autonomous capabilities are not yet feasible. The goal of this thesis is to introduce a robot that not only sets the groundwork for autonomous locomotion, but also is safe for human-robot interaction. This was done by ensuring that the actuation principle utilized by the robot is safe around humans and can work in an untethered design. Artificial muscle actuation allowed for these prerequisites …

Mechanical Properties Of Nanomodified Hybrid Gfrp Composite Materials, Micah Rop Kimutai

Electronic Theses and Dissertations

The mechanical behavior of the nanomodified hybrid epoxy matrix was investigated in glass fiber reinforced plastics (GFRP). In this study, five nanocomposites enriched with as received halloysite, nanomer I.28E, HNT-APTES, and the hybrid combinations of the two HNTs with the nanomer I.28E were successfully fabricated. To evaluate the effects and morphological characteristics of the individual fillers and the hybrid configurations on the epoxy resin matrix, TGA, DSC, and DMA were analyzed. To understand the effect of the five configurations on the neat GFRP laminate, mode I interlaminar fracture toughness, tensile, and vibration properties were investigated. Electron microscopy testing techniques were …