Digital Commons Network^™

Quantifying Lock Criticality For Inland Waterway Navigation Using An Agent-Based Simulation, Ashwin Narayan

Industrial Engineering Undergraduate Honors Theses

Inland waterway travel has tremendous potential to improve multimodal transportation in the United States due to its environment-friendly and safe nature. Waterway travel has proven to be much cheaper per ton-mile and more fuel efficient than trucks. Millions of dollars have recently been invested in inland waterway networks to facilitate travel. The waterway infrastructure must be resilient to enable efficient waterway travel and prevent unnecessary delays. Locks, an important component of waterway infrastructure, enable vessels to travel between waterways of varying depths and must be maintained consistently to avoid unexpected failures. However, with limited resources, it is difficult to preserve …

Using Sustainable Technique To Recycle Waste Paper In Academic Institutions, Mustafa M. Mansour

Al-Bahir Journal for Engineering and Pure Sciences

It has been clearly demonstrated that it would be feasible to consider recycling paper in an academic institution. This can be achieved through combining specific waste paper baskets, a pulping machine and power supplied by a renewable energy source, with an already established local paper making company. The paper making company would be able to gain a subsidy from the government which pays them to actually recycle paper, to counteract the cost of the pulped paper which is 30% more expensive than raw wood pulp. The academic institution would save money on waste disposal and decrease its carbon footprint by …

Barcode Medication Administration (Bmca): 2023-24, Krishan R. Patel, Carlos E. Sosa, Mary Grace Sy

Industrial and Manufacturing Engineering

The Barcode Medication Administration is an important system implemented within a hospital. It is the process in which nurses and other healthcare professionals prescribe and distribute medication to the patients. It aids in organizing which patient got prescribed which medication from which doctor and provides records on who was given care by who. The whole BCMA system is a multi-step process from getting the medication prescribed, to the nurses having to pick up the medication from the medication cabinet, and then having to scan the patient and the medication to finally administer medications.

The current BCMA system implemented at the …

Smart Manufacturing For Cal Poly's Ime Curriculum, Grace L. Guarraia, Eric F. Ledesma

Industrial and Manufacturing Engineering

California Polytechnic State University, San Luis Obispo (Cal Poly) takes pride of supporting one of the nation’s strongest undergraduate Industrial and Manufacturing Engineering programs. However, as industry evolves to accommodate advancing computing power, improved manufacturing algorithms, and improved robotics, it is imperative that Cal Poly’s curriculum evolves in parallel. Smart manufacturing is the future of the manufacturing industry, and Cal Poly is searching for the ideal method to teach and integrate Smart Manufacturing into its classes. With its upcoming switch to the semester system, coupled with its “Learn by Doing” motto, the department is at an ideal period for the …

Evaluating The Health Benefits And Cost-Effectiveness Of Dental Sealant Reapplication Among Children And Adolescents, Pritam Deb, Jayden Ayash, Christina Scherrer

Symposium of Student Scholars

Dental caries, commonly known as cavities, persist as a prevalent chronic disease among children. Dental sealants, which are transparent coatings applied to the molars, have been proven to prevent over 80% of caries in these teeth. However, the effectiveness of sealants diminishes over time, primarily due to their potential to detach shortly after application due to inadequate bonding, or else gradually over time. Notably, dental insurance coverage for resealing teeth after the initial sealant has been lost varies widely, with many policies only covering the cost of the initial application. This study employs a Markov model-based discrete event simulation to …

Study On Human Integrity Management System Maturity Level For Supporting Asset Integrity And Process Safety Implementation, Anggiat M. Sihotang, Dedi Priadi, Datu Rizal Asral

Journal of Materials Exploration and Findings

The human factors (HF) are recognized as one of critical process safety barriers involved in normal and abnormal conditions in the oil and gas industry. In order to strengthen the HF roles as barriers we need to ensure that the actions generated are based on a valid risk assessment of the operation to be addressed by a relevant human factor analysis. Organizations within the oil and gas process have made much progress in understanding and implementing HF improvement programs. However, organizations are not always clear about what are their current situations in managing HF, their priorities for HF to be …

Great South Metals: Slitter Head Building Process, Nabhan Karim, Evan Swierski, Raven Morin, Patrick Kelsey, Michael Williams

Senior Design Project For Engineers

Great South Metals (GSM) operates two steel slitter machines, which take large coils of flat rolled steel and cut them into smaller strips for use in customers’ applications. Setting up the working components of each machine, called the slitter head, is a precise and arduous task. This system relies on several manually performed calculations and acute attention to detail; and thus, is prone to human error. The management at GSM commissioned our team to simplify the slitter head assembly process by creating an automated computer program and make additional recommendations to improve their operations.

The program we created is a …

A Design Science And Implementation Framework For Studying Interruptions And Its Application In A Dental Clinic., Carsten Ziegler

Electronic Theses and Dissertations

Interruptions during dental treatment are frequent, and often have detrimental effects on quality of care, patient safety and processing times, and have an impact on provider satisfaction and performance. Interruptions can significantly increase the cognitive load on dental providers, making it hard for them to concentrate on complex procedures. Frequent interruptions also disrupt the workflow in general, leading to delays in treatment, which can reduce the overall throughput of a clinic. Unfortunately, there is no comprehensive approach to collectively (i) analyze interruptions in dental healthcare, (ii) design an intervention, and (iii) implement and sustain it. This research proposes a comprehensive …

Depression And Anxiety: Investigating The Impacts Of Scheduling On The Mental Health Of Healthcare Workers During The Covid-19 Pandemic, Christofer Gonzaga

All Theses

Depression is a growing problem in the United States and has ballooned into a globally recognized mental health issue that affects shift workers in various fields (Lee et al., 2017). Rates of depression and anxiety have been shown to be substantially increasing and the COVID-19 pandemic amplified this prevalence of depression and anxiety. In the United States, the prevalence of depression symptoms was more than 3- fold higher during COVID-19 compared to before the pandemic (Ettman et al., 2020). The delivery of healthcare services is an ongoing and dynamic process, requiring clinicians to work in various shifts to ensure the …

Application Of Lean Six Sigma For Improving Quality Laboratory Process, Sarmad Al Hilli

Masters Theses & Specialist Projects

Oftentimes, manufacturing companies concentrate on improving the production processes and neglecting other processes like purchasing, IT, quality control, etc. Just like production processes, uncontrolled and non-optimized of any of these processes could be main reasons of product defects, late deliveries, and high costs. Recently, an automotive OEM (Original Equipment Manufacturer) in the southeastern United States faces difficulties in performing quality control operations in a way that matches the production pace. This inadequacy has increased due to changes in customer requirements and launches a new assembly line for a new customer. Therefore, the purpose of this study was to apply Lean …

Using Convolutional Neural Networks For Autonomous Drone Navigation, Joshua Jowers

Industrial Engineering Undergraduate Honors Theses

Unmanned Aerial Vehicles (UAVs), more commonly known as drones, serve various purposes, notably in military applications. Consequently, there arises a need for navigation methods impervious to intercepted signals [1]. Previous research has explored numerous solutions, including machine learning. This paper delves into a specific machine learning approach employing a Convolutional Neural Network (CNN) to discern image locations [2]. It elucidates the conversion of a CNN model between two machine learning libraries and presents results from multiple experiments examining parameters and factors influencing the approach's efficacy. These experiments encompass testing different data sources, image quantities, and processing pipelines to gauge their …

Open-Source Optimization For Green Last Mile Delivery And Other Applications, John Sooter

Industrial Engineering Undergraduate Honors Theses

Solving combinatorial optimization problems at scale and of sufficiently interesting context has historically required commercial solvers and access to proprietary company data. The development of performant open-source mathematical programming software and crowdsourced datasets has created an opportunity for individuals and enterprises alike to consider alternative solutions to problems with social and personal implications. This honors thesis represents a summary of my undergraduate research work, an application of optimization to three distinct problems connected to these developments. First, we present an optimization study of a last mile delivery system that shows optimization for energy consumption can generate vehicleindependent fuel savings at …

Selecting Industry 4.0 Technologies For Construction Activities Using Clustering Analysis And Text Mining, Benyamin Sadeghi

Theses and Dissertations

Construction 4.0, which involves the application of Industry 4.0 technologies in construction activities, promises to revolutionize the construction industry by improving productivity, enhancing safety, promoting sustainability, and strengthening quality in the age of the Information Revolution. Industry 4.0 technologies such as Artificial Intelligence (AI), robotics, and the Internet of Things (IoT), have the potential to radically transform the construction industry in the 21st century. Construction activities constitute approximately 4.3% of the US gross domestic product-GDP and account for creating 7.5 million jobs. Although productivity has significantly increased in other industries, progress has been slow in the construction sector. One contributing …

Comparing North American Professional Sports League Season Formats Using Monte Carlo Simulation, Lathan Gregg

Industrial Engineering Undergraduate Honors Theses

Each NFL, NBA, and MLB season consists of a regular season, in which teams play a set number of scheduled games and a playoff, in which qualifying teams compete for a championship. At the conclusion of each season, teams are ranked based on their performance throughout the season. This study aims to investigate the ability of each league's season format to accurately rank teams using Monte Carlo simulation. Matches between two teams are simulated by using the team’s assigned strength ranks to calculate a winning probability for each team. The winning probabilities are simulated with different skill values, dictating how …

Sequential Optimization For Stressor-Informed Test Planning Through Integration Of Experimental And Simulated Data, Jacob Brecheisen

Data Science Undergraduate Honors Theses

This technical report details an innovative approach in reliability engineering aimed at maximizing system durability through a synergistic use of physical experimentation and computer-based modeling. Our methodology explores the efficient design and analysis of computer experiments and physical tests to facilitate accelerated reliability growth, while leveraging a sequential integration of data from these two distinct sources: costly physical experiments, characterized by random errors, and inexpensive computer simulations, marked by inherent systematic errors. The key innovation lies in the adoption of a closed-loop design and analysis method. This method begins by identifying a viable subset of important environmental stressors—such as temperature, …

Modeling Of Multi-Period Disaster Logistics Planning In The State Of South Carolina, Emma Simon

All Theses

South Carolina is one of the most vulnerable states in the United States to the impact of hurricanes. Currently, when threatened with a natural disaster such as a hurricane, the state government makes many vital decisions based on knowledge and experience. In this study, the distribution of disaster relief commodities to meet immediate needs is analyzed through two models for the case of South Carolina to generate an optimal logistics strategy that considers the social vulnerability of affected populations. The first model is a multi-objective pre-disaster logistics model that uses a four-index formulation for the multiple trip vehicle routing problem. …

Energy Optimization In Pneumatic Systems Using Ens-200 Energy Saving Trainer, Maha Guru Shankar Perumal

Open Access Theses & Dissertations

Various industries such as manufacturing and assembly, the automotive sector, printing and paper handling, packaging, aerospace, etc., widely use pneumatic systems for a variety of operations. Enterprises use pneumatic systems for cost-effectiveness, reliability, and simplicity. However, they also have certain inefficiencies, leading to high operating costs and reduced efficiency in various applications. The focus of this research is on energy optimization in pneumatic systems to improve efficiency in industrial applications, minimize energy waste, and reduce operational costs. The best practices for enhancing energy efficiency in pneumatic systems were proper system design, pressure regulation, leak detection and repair, energy-efficient components, and …

Feature Interaction Selection For High-Dimensional Experimental Data, Di Bo

Doctoral Dissertations

In a material development process, discerning the effect of material properties and their interactions on material behaviors is critical to achieving the desired functionality of a material. This causal analysis often involves a small experimental dataset arranged in a high dimension and is challenged by the curse of dimensionality. Feature selection can alleviate such a challenge by producing a short list of features that are significant, but identifying significant feature interactions is very challenging. In this proposal, we propose a couple of approaches that can evaluate and determine important interactions, including a randomized subspace-based model (RSM), feature subspace selection (FSS), …

Stability Of Quantum Computers, Samudra Dasgupta

Doctoral Dissertations

Quantum computing's potential is immense, promising super-polynomial reductions in execution time, energy use, and memory requirements compared to classical computers. This technology has the power to revolutionize scientific applications such as simulating many-body quantum systems for molecular structure understanding, factorization of large integers, enhance machine learning, and in the process, disrupt industries like telecommunications, material science, pharmaceuticals and artificial intelligence. However, quantum computing's potential is curtailed by noise, further complicated by non-stationary noise parameter distributions across time and qubits. This dissertation focuses on the persistent issue of noise in quantum computing, particularly non-stationarity of noise parameters in transmon processors. It …

Establishing Employee Sense Of Belonging In A Busy Work Environment, Zoe A. Rodriguez

2024 Spring Honors Capstone Projects

This honors thesis capstone project explores the concept of an employee’s sense of belonging within a busy work environment. A department within ABC Company faces operational challenges regarding their daily tasks. The Honors contribution addresses the comparison between the busy work environment at ABC Company and existing literature to provide scholarly-supported recommendations and mitigation strategies for ABC Company. Existing literature underscores the importance of understanding contributing influences on an employee’s sense of belonging within the workplace. The honors contribution adds value by closing the information gap within companies that operate under a busy work environment and strategies of how to …

Modernization Of Water Flow Measurement In Open Irrigation Systems Using The Slope-Area Method, R.M. Aliev, Djalilov Anvar

Chemical Technology, Control and Management

This article describes two methods for determining water flow in open irrigation systems: “speed - area” and “slope - area”. The authors considered the problem of its modernization using the existing method for determining water flow “slope - area” in open irrigation systems. The essence of the issue is the remote transfer of parameters necessary for calculating water flow in open irrigation systems and improving the means of their processing. In scientific studies conducted by the authors, the required hydraulic parameters were studied using the “slope - area” and “speed - area” water flow methods. Based on experimentally obtained data, …

Mathematical Modeling For Dental Decay Prevention In Children And Adolescents, Mahdiyeh Soltaninejad

Dissertations

The high prevalence of dental caries among children and adolescents, especially those from lower socio-economic backgrounds, is a significant nationwide health concern. Early prevention, such as dental sealants and fluoride varnish (FV), is essential, but access to this care remains limited and disparate. In this research, a national dataset is utilized to assess sealants' reach and effectiveness in preventing tooth decay, particularly focusing on 2nd molars that emerge during early adolescence, a current gap in the knowledge base. FV is recommended to be delivered during medical well-child visits to children who are not seeing a dentist. Challenges and facilitators in …

Optimization Of Human Interactions In The College Campus Model Via Simio Integration, Benjamin E. Chaback

Doctoral Dissertations and Master's Theses

College campuses are a significant part of life in some cities. Many students each year attend university, pursuing additional knowledge from faculty members. Both staff and faculty members rely on these students to have successful jobs and to ensure the university functions. Yet recently, more and more students are attending, leading to overcrowding, lower admission rates, and difficulty getting into good programs. Previous work exists on qualitative student affairs and quantitative retention data, yet little on using simulations to model this problem. This work aimed to (a) Determine the ability to successfully model human interactions/people flow on a college campus, …

Drivers’ Hazard Avoidance During Vehicle Automation: Impact Of Mental Models And Implications For Training, Ganesh Pai Mangalore

Doctoral Dissertations

Advanced Driver Assistance Systems (ADAS) are vehicle automation systems that have become more accessible and prevalent in vehicles in recent years. But the introduction of such technologies introduces new human factors challenges. Past literature suggests that users of vehicle automation lack the necessary and appropriate knowledge about their automation system. This may play a negative role in their hazard avoidance abilities when driving with automation features. Improving mental models and knowledge could generally lead to safer interactions with vehicle automation systems, but any effort to develop hazard avoidance skills when driving with vehicle automation is impeded by the lack of …

Routing Problems Through The Lens Of Hybrid Algorithms, Sasan Mahmoudinazlou

USF Tampa Graduate Theses and Dissertations

This dissertation explores novel approaches to address complex combinatorial optimization challenges in transportation and routing scenarios. Three sets of contributions are presented, each encapsulated in a chapter. The first set of contributions introduces a pioneering hybrid genetic algorithm meticulously crafted to address the intricacies of the Traveling Salesman Problem with Drone (TSPD) and the Flying Sidekick Traveling Salesman Problem (FSTSP). These emerging problems involve the strategic use of both ground-based trucks and aerial drones for efficient package delivery. Our algorithm stands out by leveraging sophisticated chromosomes and dynamic programming, allowing for broad exploration by the genetic algorithm and effective exploitation …

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

Development Of A High-Level Discrete Event Simulation Model For The Harvesting Of White Button Mushrooms With Human-Robot Collaboration (Hrc), Ava Recchia

Electronic Theses and Dissertations

Canada is a leading global mushroom producer, with the white button mushroom (Agaricus bisporus) being the most popular type produced. Harvesting activities are labour-intensive, and farms are currently experiencing labour shortages, which are impacting productivity, growth, and overall revenue. Robotic technologies are valid mechanisms for mushroom harvesting and demonstrate a potential to reduce this gap. Examining the performance of a harvesting system with different robotics scenarios, such as manual, robotics automation, and human robot collaboration (HRC) is crucial to realizing this potential. Simulation models are useful tools for testing and assessing systems without making any physical change to the system. …

Applying Functional Data Analysis To Estimate The Mental Workload Of The Human Driver, David Olorunfemi Eniyandunmo

Electronic Theses and Dissertations

Recent studies have focused on accurately estimating mental workload using machine learning algorithms and extracting features from psycho-physiological measures. However, feature extraction leads to the loss of valuable information and often results in binary classifications that lack specificity in the identification of optimum mental workload levels. This study investigates the feasibility of using raw psycho-physiological data (EEG, facial EMG, ECG, EDA, pupillometry) combined with Functional Data Analysis (FDA) to estimate mental workload of human drivers. A driving scenario with five tasks was employed, and subjective ratings were collected using the modified Bedford workload scale. Results demonstrate that the FDA applied …

Prediction Of Anomalous Events With Data Augmentation And Hybrid Deep Learning Approach, Ahmed Shoyeb Raihan

Graduate Theses, Dissertations, and Problem Reports

In this study, we propose a novel anomaly detection framework designed specifically for Multivariate Time Series (MTS) data, addressing the prevalent challenges in analyzing such complex datasets. The detection of anomalies within MTS data is notably difficult due to the complex interplay of numerous variables, temporal dependencies, and the common issue of class imbalance, where one category significantly outnumbers another. Traditional deep learning (DL) approaches often fall short in simultaneously tackling these issues. Our framework is designed to address these challenges through a two-phased approach. Phase I employs Conditional Tabular Generative Adversarial Networks (CTGAN) to create strategic synthetic data, setting …