Digital Commons Network^™

Development Of An Insulated Solar Electric Cooker (Isec) With Thermal Storage For Use In Developing World Countries, Amanda Gyokery, Spencer W. Davis, Kyle Henry Smit

Mechanical Engineering

According to the World Health Organization, about half of the world’s population uses biomass stoves to cook their meals. However, biomass fires can be dangerous. Unattended biomass fires and indoor air pollution are responsible for an estimated 600,000 deaths annually and the creation of approximately 4 million instances of chronic disease. They also release CO2 and other pollutants into the air, and require the families to gather enough material to keep it burning (WHO 2017). Although cleaner cooking technology seems like a clear solution, often families are either unwilling to change how they cook food or are unable to afford …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Numerical Characterization Of The Flow Field And Heat Transfer Inside The Receiver Of A Parabolic Trough Solar Collector Carrying Supercritical Co2, Samad Gharehdaghimollahajloo

UNLV Theses, Dissertations, Professional Papers, and Capstones

The aim of this research is to provide a detailed numerical analysis of flow field and heat transfer inside the heat collecting element of a parabolic trough collector. The parabolic trough collector is used as the boiler in a direct Super Critical Carbon Dioxide (S-CO2) Brayton cycle.

A single collector is modeled and analyzed with different inlet conditions. The working fluid is supercritical since its pressure is increased to above critical pressure in the compressor while its temperature reaches 300 °C after passing through the recuperators and before entering the solar field. For the first time, this research considers both …

Simulating Distributed Battery And Solar Array Placement For Voltage Regulation, Michael Misch

UNLV Theses, Dissertations, Professional Papers, and Capstones

Energy storage has been around for many years in the US, mainly in the form of pumped hydro. However, in recent years, other storage technologies have developed quickly, with lithium ion batteries receiving significant investment and delivering technological and price improvements. Electricity storage has the potential to assist the US in transitioning to a smarter grid, as well as enabling increasing amounts of renewable generation to connect to the grid, without costly reinforcement works. Electricity storage can be co-located with power generation assets, installed along distribution systems for network services, or placed behind the meter, i.e., on the customer’s premises. …

Modeling And Simulation Of Microgrid, Ahmad Alzahrani, Mehdi Ferdowsi, Pourya Shamsi, Cihan H. Dagli

Electrical and Computer Engineering Faculty Research & Creative Works

Complex computer systems and electric power grids share many properties of how they behave and how they are structured. A microgrid is a smaller electric grid that contains several homes, energy storage units, and distributed generators. The main idea behind microgrids is the ability to work even if the main grid is not supplying power. That is, the energy storage unit and distributed generation will supply power in that case, and if there is excess in power production from renewable energy sources, it will go to the energy storage unit. Therefore, the electric grid becomes decentralized in terms of control …

Solar Irradiance Forecasting Using Deep Neural Networks, Ahmad Alzahrani, Pourya Shamsi, Cihan H. Dagli, Mehdi Ferdowsi

Electrical and Computer Engineering Faculty Research & Creative Works

Predicting solar irradiance has been an important topic in renewable energy generation. Prediction improves the planning and operation of photovoltaic systems and yields many economic advantages for electric utilities. The irradiance can be predicted using statistical methods such as artificial neural networks (ANN), support vector machines (SVM), or autoregressive moving average (ARMA). However, they either lack accuracy because they cannot capture long-term dependency or cannot be used with big data because of the scalability. This paper presents a method to predict the solar irradiance using deep neural networks. Deep recurrent neural networks (DRNNs) add complexity to the model without specifying …

Medium Duty Gas-Turbine Engine Blade Removal Tool, Elliott James Greb, Jacob Thomas Syage, Kellen Thomas Field

Mechanical Engineering

Solar Turbines Incorporated sponsored a team of three Cal Poly Undergraduate Mechanical Engineering students to design, manufacture, prototype, and test a tool for the removal of turbine blades from their respective disk assembly without damaging the disk itself. The tool was developed for Solar’s industrial gas turbine engines. The tool complies with all OSHA and Solar Turbines safety and engineering constraints, and was designed for use in a shop facility. The tool was made adaptable for geometric variances in multiple turbine rotor disk stages, and requires no more than one technician to operate using a maximum of two shop resources. …

Solar Powered Single-Axis Heliostat Active Solar Tracking Device, Mason Kyle Roberts

Physics

As a means of cooking food, the burning of biomass accounts for over 4 million premature deaths in third world countries (“Household Air Pollution and Health”). The focus of this project was to explore an alternative that could utilize focused sunlight to cook food. A solar tracker was designed to be affixed to a parabolic, reflective, tilted single axis heliostat to follow the sun throughout the day and focus the reflected light to the bottom of a cooking surface. This surface became hot enough to for the preparation of food or boiling/sterilization of water.

A goal for each project was …

Novel Synthesis Of Cigs Nanoparticles For Scalable, Benign Inks For Solution Processed Solar Cells, Jacob Fields, Ryan Ellis, Rakesh Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

One potential production route to high efficiency, low cost, photovoltaics (PVs) which was explored is Copper Indium Gallium Sulfide (CIGS) nanocrystal inks for solution processed PVs. A common CIGS nanocrystal ink synthesis utilizes ligands—molecules attached to the particle surface—for colloidal stability, size control, and shape control. It is desirable to devise a novel synthesis which will incorporate a ligand that allows suspensions in more benign solvents than current methods—a desirable characteristic for large scale production. In order to develop the aforementioned synthesis of CIGS nanoparticles, an optimization study of synthesis parameters was performed. Selection of an appropriate solvent, and sulfur …

Visualization And 3d Printing Of A 3d Solar Tracker Model Using Mayavi And Pov-Ray, Aditya Mehra

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

In this work, we have created a realistic model of a solar tracker using Mayavi: 3D scientific data visualization and plotting in Python, Enthought Canopy:a comprehensive Python analysis environment and Persistence of Vision Ray Tracer, or POV-Ray, a ray tracing program which generates photo-realistic images from a text-based scene description, a model of the solar tracker was also 3D printed.

An Economic Analysis Of Residential Photovoltaic Systems With And Without Energy Storage, Rodney Moses Kizito

Graduate Theses and Dissertations

Residential photovoltaic (PV) systems serve as a source of electricity generation that is separate from the traditional utilities. Investor investment into residential PV systems provides several financial benefits such as federal tax credit incentives for installation, net metering credit from excess generated electricity added back to the grid, and savings in price per kilowatt-hour (kWh) from the PV system generation versus the increasing conventional utility price per kWh. As much benefit as stand-alone PV systems present, the incorporation of energy storage yields even greater benefits. Energy storage (ES) is capable of storing unused PV provided energy from daytime periods of …

Solar Roller - Solar Powered Usb Charging Station, Aaron Bartfeld, Tanner Mjelde, Kaylan Naicker

Electrical Engineering

As the necessity for renewable energy increases, solar power becomes more and more prevalent. At the same time, as technology increases, the necessity for charging one’s electronic devices also increases. The Solar Roller merges solar energy with the ability to charge one's electronic device in one compact cart. The Solar Roller is a solar-powered USB charging station that allows people of all backgrounds to develop a better understanding of alternative fuels, while charging their USB device. It has a touch screen display that provides voltage levels of the battery as well as a TV that displays solar powered information. The …

Solar Powered Electric Vehicle Charger, Jessica A. Bombardier Shaw, Andrew F. Moradpour

Electrical Engineering

This project will look into how to create an efficiently-operated solar powered electric vehicle charger. The solar panel will harvest energy from the sun that will be stored a battery pack to be readily available to charge an electric vehicle. These stations could be commercialized to be located along a highway, or personalized for a in-house installation.

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Compiled Research & Materials, Appendix F: Valuable Solar Resources, Andrew Tarutani, Laura Kunas, Conor Mcgrail, Colin Joern, Madalyn Beban

Sustainability and Energy

This document lists several URLs that may offer valuable information as it pertains to solar energy and solar initiatives across the U.S.

Compiled Research & Materials, Appendix L: Solar America Initiative, S. Grover

Sustainability and Energy

This National Renewable Energy Laboratory resource details the benefits of the Solar America Initiative.

Compiled Research & Materials, Appendix K: Economic Impact Potential Of Solar Photovoltaics In Illinois, Illinois State University. Center For Renewable Energy

Sustainability and Energy

This 2013 study reviews the potential for economic impact of solar photovoltaics in the state of Illinois.

Compiled Research & Materials, Appendix Q: Energysage Interview, Andrew Tarutani, Conor Mcgrail, Colin Joern, Madalyn Beban, Laura Kunas

Sustainability and Energy

This document reviews several of the topics discussed in an informational interview with a representative with EnergySage.

Compiled Research & Materials, Appendix N: Keybank Interview, Andrew Tarutani, Laura Kunas, Madalyn Beban, Colin Joern, Conor Mcgrail

Sustainability and Energy

This document reviews several of the topics discussed in an informational interview with KeyBank regarding financing options for solar projects.

Compiled Research & Materials, Appendix O: Energywize Interview, Andrew Tarutani, Madalyn Beban, Laura Kunas, Colin Joern, Conor Mcgrail

Sustainability and Energy

This document reviews several of the topics discussed in an informational interview with Wendell Ott of EnergyWize.

Compiled Research & Materials, Appendix P: Current Solar Pricing, Andrew Tarutani, Laura Kunas, Madalyn Beban, Colin Joern, Conor Mcgrail

Sustainability and Energy

This document reviews the current state of solar costs as defined in an informational interview with Wendell Ott of EnergyWize.

Compiled Research & Materials, Appendix M: Mcpherson Town Interview, Andrew Tarutani, Laura Kunas, Madalyn Beban, Conor Mcgrail, Colin Joern

Sustainability and Energy

This document reviews several of the topics discussed in an informational interview with McPherson Town neighborhood president Phil Leppla.

Investigating Solutions For Peak Electrical Demand In Central Region, Saudi Arabia, Abdulhameed Mohammed Almaarik

Theses and Dissertations

This thesis studies the electrical power challenges of the Central Region, Saudi Arabia. This includes a look into the geography of Saudi Arabia, to assess the lack of traditional power sources such as coal and hydroelectric. Next, a comprehensive look into the nature of demand in Riyadh, which include the demand types, and comprehensive data about the peak demand and the times associated with it. A problem of very high peak demand that is unique to the region is identified. Then, a study into current electric generation methods to meet this demand, and the associated technologies and fuel costs. This …

Compiled Research & Materials, Appendix J: Solar For Economic Development Toolkit, National Association Of Regional Councils

Sustainability and Energy

This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the …

Compiled Research & Materials, Andrew Tarutani, Madalyn Beban, Laura Kunas, Colin Joern, Conor Mcgrail

Sustainability and Energy

This document outlines the research conducted and progress made over the Spring 2017 semester. It details the team's efforts to pursue implementation of a solar co-op in the McPherson Town neighborhood along with an innovative tiny homes neighborhood on the University of Dayton's campus.

Solar Tracker, Carson Man

All Undergraduate Projects

During the senior year in Mechanical Engineering Technology program, a solar tracker was designed and manufactured to be used during Mechanical Engineering Technology labs. The solar tracker will be able to rotate 15 degrees per hour by keeping it in line with changing position of the sun as the sky daily. The solar tracker was designed by calculating the need of the motor speed, allowable load, estimated solar input, and desired efficiency. Also it must be able to withstand the elements of nature, most effects are from the sun(heat), rain(water) and wind(air). Most of the concern will be the effect …

Development Of Microencapsulated Phase Change Material For Solar Thermal Energy Storage, Weiguang Su, Jo Darkwa, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper a novel microencapsulated phase change material (MF-3) has been developed and tested for solar assisted hot water storage systems. Even though the morphology of the sample was affected by the type of emulsifier used for fabrication it recorded the highest energy storage capacity of 126 kJ/kg with encapsulation efficiency of 97.4% as compared with other developed samples. For the purpose of assessing its thermal effectiveness it was theoretically evaluated in a compacted fixed bed TES unit and found to be capable of achieving a higher energy storage density as well as relatively smaller physical storage size than …

Performance Simulation Of A Ground Source Heat Pump System Integrated With Solar Photovoltaic Thermal Collectors For Residential Application, Lei Xia, Zhenjun Ma, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part B

This paper presents the simulation and performance evaluation of a ground source heat pump (GSHP) system integrated with water-based solar photovoltaic thermal (PVT) collectors for residential buildings. A dynamic simulation system is developed using TRNSYS and used to facilitate the performance evaluation of the system. A 20-year life-time performance simulation is performed under three operation scenarios with different sizes of the PVT collectors. The results showed that the performance of the system is highly dependent on the size of the PVT collectors. Furthermore, an economic analysis is carried out to determine the optimum size of the PVT collectors for the …

Development Of A Dynamic Model For A Hybrid Photovoltaic Thermal Collector - Solar Air Heater With Fins, Wenke Fan, Georgios Kokogiannakis, Zhenjun Ma, Paul Cooper

Faculty of Engineering and Information Sciences - Papers: Part A

A dynamic model for a hybrid Photovoltaic Thermal Collector-Solar Air Heater (PVT-SAH) with longitudinal fins was developed to enable assessment of the potential of the system to provide high temperature outlet air (60-90 °C) under dynamic boundary conditions. The model description includes the method for discretising the system into a number of control volumes, the energy balance equations for each control volume and the implementation of the numerical solution. Model validation has been successfully undertaken by using empirical verification of model predictions with an experimental facility and by comparing the model outputs with the reference data from the literature. The …

Smart Home Energy Management: An Analysis Of A Novel Dynamic Pricing And Demand Response Aware Control Algorithm For Households With Distributed Renewable Energy Generation And Storage, Jamal Abushnaf

Theses: Doctorates and Masters

Home energy management systems (HEMS) technology can provide a smart and efficient way of optimising energy usage in residential buildings. One of the main goals of the Smart Grid is to achieve Demand Response (DR) by increasing end users’ participation in decision making and increasing the level of awareness that will lead them to manage their energy consumption in an efficient way. This research presents an intelligent HEMS algorithm that manages and controls a range of household appliances with different demand response (DR) limits in an automated way without requiring consumer intervention. In addition, a novel Multiple Users and Load …