Digital Commons Network^™

Floodplain And In-Channel Sedimentation In The Bedrock Congaree River, Sc, Mahsa Ahmadpoor

Theses and Dissertations

The Congaree River planform is characterized by an abrupt increase in channel sinuosity in the downstream direction. Such a change is not typical of alluvial meandering rivers but has been observed in mixed bedrock-alluvial rivers. This motivated the first study of this dissertation, specifically designed to determine if the Congaree River is indeed a mixed bedrock-alluvial river in its low sinuosity (upstream) reach. To test this hypothesis, sonar-based measurements of channel bed and sublayer elevation were performed from Columbia to the Congaree River-Wateree River confluence. The sublayer is here defined as the first surface visible in the sonar measurements underneath …

Examining The Influence Of The Classroom Environment On Motivation, Belonging, And Academic Confidence In Engineering Education: A Relational Developmental Systems Approach, Robert O'Hara

All Dissertations

This dissertation explores the impact of the classroom environment on undergraduate engineering students by integrating three manuscripts using the process-person-context-time (PPCT) model within Bioecological Systems Theory. Each manuscript focused on students’ sense of belonging, motivation, and academic confidence. The study confirms prior research suggesting a link between students' perceptions of the environment and their sense of belonging, motivation, and academic confidence. The findings highlight the complex nature of student and classroom environment relationships throughout their college experience. Moreover, the results are demonstrated across different engineering majors. Overall, this dissertation highlights the significance of understanding the complex interactions between students and …

The Influence Of Diversity Dimensions On Student’S Collaboration Success: What It Means For Workforce Development In Manufacturing, Oyinkansola Adeite

All Theses

Manufacturing productivity is measured by labor productivity which is the hourly output of the manufacturing economy. The recent reduction in productivity numbers by the United States Bureau of Labor Statistics emphasizes the need for workforce development. With globalization and technological advancements, diversity has emerged as a critical aspect for the workplace. By encompassing dimensions such as education, race, and age, diversity creates a tapestry of unique perspectives and experiences. This study’s aim is to figure out the effect of a diversity dimension on team performance using intelligent systems, and in addition, if extra dimensions of diversity further impact team performance. …

Culture In Computing: The Importance Of Developing Gender-Inclusive Software, Creighton France

Computer Science and Computer Engineering Undergraduate Honors Theses

The field of computing as we know it today exists because of the contributions of numerous female mathematicians, computer scientists, and programmers. While working with hardware was viewed as “a man’s job” during the mid-20th century, computing and programming was viewed as a noble and high-paying field for women to occupy. However, as time has progressed, the U.S. has seen a decrease in the number of women pursuing computer science. The idea that computing is a masculine discipline is common in the U.S. today for reasons such as male-centered marketing of electronics and gadgets, an inaccurate representation of what it …

Site Development Feasibility Study, Andy A. Tenekjian

Construction Management

A feasibility study in the world of construction is deemed as a preliminary due diligence process in which key components of a project are addressed to determine if the project is viable or not. These components are related to time and money, and the end goal of a feasibility study is to determine if the initial investment of time and money is worth the amount of future financial return. What deems a project successful in the preliminary stage is up for interpretation. Each developer and investor have their own return on investment threshold in a multi-family project like the one …

Characterizing The Expression Pattern And Function Of Tartan During Drosophila Development, Alaina Baggett

Biomedical Engineering Undergraduate Honors Theses

The development of complex structures and organs by multicellular organisms relies on the ability of epithelial cells to self-organize. Epithelia are sheets of connected cells, and compartment boundaries are formed between certain epithelial cells to create distinct tissue compartments. Compartment boundaries are specialized cell-cell interfaces that are enriched for the cytoskeletal proteins actin and myosin, leading to straight cell edges under relatively high tension that act as fences keep cells from moving between compartments. In the model organism Drosophila melanogaster (fruit fly), compartment boundaries in the early embryo are established in response to the non-uniform striped expression of the cell-surface …

Techno-Economic Feasibility Of Electrifying Food Markets In Nigeria With Biogas Hybrid Mini-Grids, Demi Temitope Ogunwo

Cal Poly Humboldt theses and projects

This thesis explored the feasibility of electrifying a food market in an urban city in Nigeria with a hybrid biogas-powered mini-grid. Under the Energizing Economies Initiative of the Rural Electrification Agency of Nigeria, nine markets in the country currently receive constant access to electricity via hybrid mini-grid systems. As a majority of these systems are diesel-solar-battery systems, this thesis explored the use of biogas generators as a substitute for diesel generators in hybrid mini-grids for food markets. A fruit and vegetable market in Ketu, Lagos was used as a case study for the research. The research for this thesis was …

Conceptual Proposal For New Student Housing In San Luis Obispo, Jack F. Tunney

Construction Management

This real property development project walked through the steps and procedures that are typical for real property development. The project focused on a conceptual multi-unit student housing project located near Cal Polys campus. The rental market in San Luis Obispo is very competitive and through market and financial analysis, it was determined that there is a demand for projects like the one proposed. The project walked through the processes associated with the financial analysis of a potential construction project in San Luis Obispo. The project identifies a site, creates a budget both for construction, development, and design costs, then analyzes …

Engineers In Action Bridge Program - Creation Of The Cal Poly Chapter, James Foad

Construction Management

The purpose of this project was to establish a chapter of Engineers in Action at California Polytechnic State University in San Luis Obispo. Engineers in Action is a non-profit organization which is dedicated to constructing footbridges in underserved countries. Bridges are linked to many benefits for those without reliable access year-round. Chapters of this organization work to design, fund, and build the footbridges in remote locations consisting of West Virginia, eSwatini, and Bolivia. The plan for the chapter was to establish a founding team which can work together to both recruit new members, and complete the tasks needed to successfully …

Effects Of Historical Land-Use Change On Surface Runoff And Flooding In The Amite River Basin, Louisiana, Usa Using Coupled 1d/2d Hec-Ras–Hec-Hms Hydrological Modeling, Alexandre G. H. Cowles

LSU Master's Theses

The Amite River Basin is a largely rural watershed spanning parts of four counties in southern Mississippi and seven parishes in southeast Louisiana, with basinwide imperviousness increasing from 0.82% in 1938 to 3.85% in 2016. The Basin has been the subject of significant research interest since catastrophic flooding in 2016 caused 13 deaths and widespread damages. Rapid development in recent decades has led to an expansion of impervious surfaces in Baton Rouge and surrounding areas, encroaching on floodplains and wetlands. At the basin scale, differences in flooding due to impervious cover changes were found to be somewhat limited, particularly along …

Design Of High Stability Superhydrophobic Surfaces, Shuo Wang

Major Papers

In the recent two decades, superhydrophobic surfaces' properties and their potential applications have attracted much attention. With the main advantages of self-cleaning, anti-icing, and drag-reduction, the superhydrophobic surfaces can be applied to many industry fields. But the traditional fabrication methods developed in the last twenty years for the superhydrophobic surfaces were focusing on mimicking nature. Specifically, most of the fabrication methods were based on the micro, and nano-scale structure of plants and animals, which came with the problems that such weeny structure on the surfaces would be damaged easily in the practical application without the self-healing capability like the creatures …

Development Of A Heavy-Duty Aluminum Rail Hole Punch Manufacturing Fixture, Reese Hawthorne

Williams Honors College, Honors Research Projects

This report details the development and testing of an improved replacement for a worn manufacturing fixture which was used to position the location of four drilled holes on the outside of a heavy-duty aluminum rail. Commissioned by JohnDow Industries, the new process improves upon the old one by implementing an electro-hydraulic punch and new locating fixture. The new design produced higher quality slots, decreased cycle time by 15%, and aimed to improve the ergonomics of the process for the employees. All these factors contributed to making the aluminum rails a high-quality end product for JohnDow’s customers. Further iteration of the …

Understanding Slo 22 - Lifelong Learning, Madeleine Zetterquist

Construction Management

This paper is an informative overview of the student learning objective SLO 22, lifelong learning, in relation to the California Polytechnic State University, San Luis Obispo Construction Management Department. The student learning objective of lifelong learning is an existing university objective for Cal Poly, however, recently has also become a department specific objective for Construction Management. This senior project explores what lifelong learning means to the Construction Management department. Further, the paper explores how the current outcomes of this objective may improve to more closely embody the department mission. These findings will allow for emphasis on lifelong learning in order …

Development Of A Reference Design For A Cyber-Physical System, Nicholas Paul Blair

Graduate Theses and Dissertations

The purpose of this thesis is to develop a reference design to assist in the selection of security practices in power electronics design. A prototype will be developed from this reference design for evaluation. This evaluation will include a brief cost/benefit analysis to gauge the efficacy of implementing each layer of security throughout the power electronics design process. This thesis will also describe the obstacles and effectiveness of integrating a Trusted Platform Module (TPM) into a cyber-hardened grid-connected device. The TPM device is a secured crypto processor that assists in generating, storing, and restricting the use of cryptographic keys. The …

Providing Sustainable Power Through Renewable Energy For Developing Communities In Central America, Elizabeth Topping

Biological and Agricultural Engineering Undergraduate Honors Theses

Rural electrification through an expansion of the power grid into remote villages in Central America is a development that is still years away. Using renewable energy technology, access to electricity is available even in the most remote areas of the world. These individual power grids are also called “microgrids.” Creating microgrids in rural areas provides the people living there with access to power they did not have before. With this newfound access to power, these communities can expand their access to education, using computers or mobile devices. They can power lights, refrigerators, and other devices to continue development.

The design …

Neca Ghana Project, Michael T. Klee

Construction Management

Cal Poly’s motto is, “Learn by Doing" and for Cal Poly’s NECA Chapter, this isn’t simply a motto, but a directive for proactive change. For my senior project I will be leading the Cal Poly NECA chapter in the design, pre- fabrication and construction of a 5-7kw solar array, community center, ice production room and technology room in the remote fishing village of Agbokpa, Ghana. The solar array will power multiple industrial DC freezers, high efficiency LED lighting and charging stations while additionally powering water filtration and irrigation systems. Like many other fishing villages around the world, Agbokpa has no …

The Design And Development Of A Device To Assist In Boosting Patients, Taylor A. Rieckhoff

Masters Theses

A common task a nurse is required to perform is called boosting patients. Boosting a patient is defined as lifting or sliding a patient back up in the bed after having slid down (Mannheim, Zieve, & Conaway, 2017). The current method for boosting patients involves a minimum of two personnel and an 11-step process. The 11-step process requires the person to manually lift and pull the patient using an existing half sheet on the bed (Mannheim, Zieve, & Conaway, 2017). Patients who cannot move or support themselves are moved every two to six hours or upon request (Bihn, Rieckhoff, Burkman, …

The Role Of The Built Environment In Transforming Underserved Neighborhoods Into Smart And Connected Communities, Mary Claire Nabors

All ETDs from UAB

The goal of this report is to create a model for transforming underserved neighborhoods into smart, connected, healthy, and sustainable communities by focusing on the built environment. To do this, there must be a thorough neighborhood analysis of the existing conditions with recommendations for what needs to be done, both short term and long term. The built environment impacts many aspects of a neighborhood and the quality of life for residents. Sidewalks, streets, lighting, landscaping, and accessibility are all components of the built environment and research has continuously shown how the deterioration of the built environment affects the health and …

Design For Maintainability In Developing Communities—A Case Study On The Uros Islands, Thomas Barlow

Undergraduate Honors Theses

Designing products for developing communities has exposed many of the underlying assumptions that engineers from developed nations have during the design process. There has been much written about these underlying assumptions in order to create a better framework for designing for developing communities. One unexplored, yet important area is the universality of common maintainability principles used in developed countries when designing products used in developing communities. Such principles include: simplicity, diagnosability, standardization of parts, modular subassemblies, minimizing assembly and disassembly parts, labeling components, increased life of moving parts, manuals, and simplifying tools needed for repairs [1]–[3]. The purpose of this …

Assessment Of The Potential Of Proposed Stations Of The California High-Speed Rail As Major Hubs For Physical And Economic Development, Seitu Akira Coleman

Master's Theses

This study investigated the potential for development of station catchment areas around the proposed California High-Speed Rail System. The study was prompted by a review of practices of Japanese railway company groups that engage not only in train operations, but also in business diversification and property development within the station areas of their lines. These actions allow the company groups to diversify their revenues streams, increase ridership on their lines, and operate as a whole with net profits. This is in contrast to transit agencies in the United States, which only focus on transporting passengers along their lines and do …

Development Of Bimetallic Catalysts For Dry Reforming Of Methane And Hydrogenation Of Succinic Acid, Jayson Michael Keels

Theses and Dissertations

Advances in natural gas recovery have greatly impacted the global economy; the abundant supply of gas has revealed new opportunities and challenges in a wide range of markets within the fuels and chemicals industries. One such opportunity exists with the overabundance of gas from remote wells that is flared or emitted because of the high costs associated with transportation of a chemical with such a high molar volume. A possible solution is an on-site process to convert gas to higher value chemicals that are liquid at standard conditions, and can more easily be transported. As a first step, CO2 from …

Development Of A Supplier’S Delivery Time And Delivered Quality Performance Index And Assessment Of Alternative Decisions Regarding Underperforming Suppliers For The Aerospace Industry, Clint Saidy

Theses and Dissertations

This study investigates current practices of supplier’s delivery assessment so that a comprehensive index and a cost function model could be properly developed. Following a thorough literature review, a framework was created based on a penalty cost function that integrates both suppliers’ ability to deliver on time, as well as suppliers’ capability to deliver good quality. Afterward, suppliers could then be ranked and placed either in good standing, or transversely on probation. Underperforming suppliers face three potential outcomes based on current literature: (1) switching supplier, (2) increase collaboration, (3) maintaining the status quo. The decision vis-à-vis failing suppliers is based …

Development Of Models And Solution Methods For Different Drayage Applications, Samaneh Shiri

Theses and Dissertations

In the last decades, intermodal freight transport is becoming more attractive in the global supply chains and freight transport policy makings. Intermodal freight transport provides a cost-effective, reliable, and efficient movement of freight by utilizing the strengths of different transport modes. The initial and final segment of intermodal freight transport, performed by truck, is known as “drayage.” The scheduling of truck movements in drayage operation within the service area of an intermodal terminal is an operational problem which leads to a truck scheduling problem that determines the efficient schedule of trucks while satisfying all transportation demands and constraints. Drayage accounts …

The Design, Development, And Evaluation Of A Usable And Privacy-Enhanced Telepresence Interface For Older Adults, Xian Wu

Theses and Dissertations

Maintaining health and wellness while aging-in-place independently is crucial for older adults. Telepresence technology can be potentially beneficial for this target population to stay socially connected. However, this technology is not specifically designed for older adults. For this target population to adopt such technology successfully, it is important to ensure that they do not experience usability barriers. This research uses HCI/HRI concepts and technology design principles for older adults to design, develop and test telepresence user interfaces (UI). This addresses the following research questions: 1): What are the essential usability and privacy-enhanced features needed to inform the design and development …

Small-Scale Intelligent Vehicle Design Platform, Christopher Grant, Jay Miley, Evan Phillips

Mechanical Engineering

Intelligent Vehicle Design is a growing field with the potential to save many lives by actively minimizing the impacts of human error. Though there are many ways to research intelligent vehicle control, full-scale implementations are expensive and dangerous and computer simulations have extremely steep learning curves. Researchers and students need an accessible, adaptable, and robust development platform to rapidly create and test autonomous control algorithms. While small-scale platforms are often designed from the ground up for specific projects, this requires analysis, design, and manufacture. The goal of this project is to develop a small-scale intelligent vehicle that can be configured …

The Technology Development And Commercialization Of 'Smart' Scientific Instrumentations, Tony Hoang

Legacy Theses & Dissertations (2009 - 2024)

The technology development of two centrifuge-based instruments gave rise to an Internet-of-Things (IOT) biotech startup. The first instrument: the centrifuge force microscope (CFM) was recently introduced as a platform for massively parallel single-molecule manipulation and analysis. Here we developed a low-cost and self-contained CFM module that works directly within a commercial centrifuge, greatly improving accessibility and ease of use. Our instrument incorporates research grade video microscopy, a power source, a computer, and wireless transmission capability to simultaneously monitor many individually tethered microspheres. Building off of the first project, the second instrument we introduced was the “smart” centrifuge-test tube holder. The …

Development Of Pressure Swing Adsorption (Psa) Processor Co2 Capture From Flue Gas, Md. Atikur Rahman

Theses and Dissertations

Reducing the anthropogenic CO2 emissions and lowering the concentration of greenhouse gases in the atmosphere has become one of the most important environmental issues of recent times. To this end, the development of a cost effective pressure swing adsorption (PSA) process, utilizing commercially available 13X zeolite as the adsorbent, is underway to remove and concentrate CO2 in the flue gas of a coal-fired power plant. This systematic development effort has been carried out so far at the bench scale. It has included the following studies that defined and validated this PSA process both experimentally and via a PSA process model. …

Tournament Wizard: Simple And Lightweight Software For Running Fencing Tournaments, John Ryan Daley

Computer Science and Software Engineering

Many sports use technology to assist in officiating and administration. Fencing tournament organizers use specialized software to help determine how their matches occur, and to help them administer a tournament. However, the software most commonly used to run these tournaments has some significant limitations, and is not well-suited for use with small events. As a former President of Cal Poly’s Fencing Club, I have had a chance to interact with one popular application for running fencing tournaments a number of times, and made note of its shortcomings. These included issues with operating system compatibility, license transference, and amount of space …

Development And Evaluation Of Matrix Material Formulations For Potential Integration Into Immunodiagnostic Biosensors, Payam Aminayi

Dissertations

This study supports the development, characterization and optimization of biosensor material formulations for immunodiagnostic applications based on experimental findings and hypotheses by Wang and Wu [1, 2], and using a test-plate apparatus and thin-film design developed by Young [3].

Certain biosensors working on the basis of conductance/impedance changes have demonstrated their potential to detect various bacteria, enzymes, and biomolecules due to their enhanced electrical properties with incorporated single-walled carbon nanotubes (SWNT). From the work conducted in our laboratory, we are attempting to determine and develop a matrix formulation containing highly dispersed SWNT, antibody and other components that elicit a significantly …

Ymca Operations Manual Development, Devlin Stewart

Industrial and Manufacturing Engineering

The San Luis Obispo YMCA sports department was losing money and overworking their employees due to lack of processes and organizational issues. To address this, a plan was made with the sports director to begin organizing the sports department. This would be done by creating an operations manual for them to organize and consolidate all of their relevant information.

The project was scoped to develop a plan for the YMCA to implement an operations manual. By delivering a work breakdown structure, a gantt chart, and a plan for continuous improvement, the YMCA could use these tools to develop their operations …