Digital Commons Network^™

Numerical Modeling Of Infrared Thermography Techniques Via Ansys, Hayder Abdulnabi Thajeel

Masters Theses

"Several inspection techniques have been developed over years. Recently, infrared thermography (IRT) technology has become a widely accepted as a nondestructive inspection (NDI) technique for different fields and various applications as well. Infrared thermography stands as one of the most an attractive and a successful NDI technique that has ability to detect the object's surface/subsurface defects remotely based on observing and measuring the surface's emitted infrared heat radiation by using an infrared camera. The finite element modeling FEM ANSYS was successfully used for the modelling of several IRT techniques; such as Pulsed Thermography (PT) and Lock-in Thermography (LT) that can …

Mems Cantilever Sensor For Thz Photoacoustic Chemical Sensing And Spectroscopy, Nathan E. Glauvitz

Theses and Dissertations

Sensitive Microelectromechanical System (MEMS) cantilever designs were modeled, fabricated, and tested to measure the photoacoustic (PA) response of gasses to terahertz (THz) radiation. Surface and bulk micromachining technologies were employed to create the extremely sensitive devices that could detect very small changes in pressure. Fabricated devices were then tested in a custom made THz PA vacuum test chamber where the cantilever deflections caused by the photoacoustic effect were measured with a laser interferometer and iris beam clipped methods. The sensitive cantilever designs achieved a normalized noise equivalent absorption coefficient of 2.83x10^-10 cm^-1 W Hz^-1/2 using a 25 …

Systems Metabolic Engineering Of Microbial Cell Factories For The Synthesis Of Value-Added Chemicals, Arul Mozhy Varman

All Theses and Dissertations (ETDs)

Microbial cell factories offer us an excellent opportunity for the conversion of many different cheaply available raw materials into valuable chemicals. Systems metabolic engineering aims at developing rational strategies for the engineering of microbial hosts by providing global level information of a cell. This dissertation focuses on metabolic engineering, bioprocess modeling and pathway analysis, to develop robust microbial cell factories for the synthesis of value-added chemicals. The following research tasks were completed in this regard.

First, statistical models were developed for the prediction of product yields in engineered microbial cell factories - Saccharomyces cerevisiae and Escherichia coli: Chapter 2). A …

Investigations Of Cost-Effective Biodiesel Production From High Ffa Feedstock, Lesly N. Lesmes Sanchez

Electronic Thesis and Dissertation Repository

Commercial production of biodiesel from refined vegetable oils has been widely practiced. However, more economic raw materials are required in order to make biodiesel competitive in the fuel market. This is a challenge since low-cost lipid feedstock contains high concentrations of free fatty acids (FFA) and water, which inhibit transesterification. This work investigates new catalyst combinations and method configuration to develop a cost-effective and suitable process utilizing refined canola oil and canola oil with high oleic acid content. Results suggest that potassium carbonate is more tolerant to water in the feed and enhances phase separation when compared to traditional catalyst, …

Experimental Investigation Of Mist Film Cooling And Feasibility Study Of Mist Transport In Gas Turbines, Reda M. Ragab

University of New Orleans Theses and Dissertations

In the modern advanced gas turbines, the turbine inlet temperature may exceed 1500°C as a requirement to increase power output and thermal efficiency. Therefore, it is imperative that the blades and vanes are cooled so they can withstand these extreme temperatures. Film cooling is a cooling technique widely used in high-performance gas turbines. However, the film cooling effectiveness has almost reached plateau, resulting in a bottleneck for continuous improvement of gas turbines' efficiency.

In this study, an innovative cooling scheme, mist film cooling is investigated through experiments. A small amount of tiny water droplets with an average diameter about 10-15 …

A Wedge Impact Theory Used To Predict Bow Slamming Forces, Ashok Benjamin Basil Attumaly

University of New Orleans Theses and Dissertations

The pressures and impact forces acting on a hull while experiencing bow wave slamming is analyzed using Vorus' Impact Theory. The theory extends the hydrodynamic analysis of planing hulls from simple wedges to irregular shapes using a Boundary Element Method. A Fortran-based code developed by the Author is used to analyze hullforms. Linear strip theory is used to extend the analysis over a three dimensional hull. Post-processing of output data gives hull pressure distributions at different time steps and is visually presentable.

Impact pressure, Impact force, Planing, Wave slamming, Bow impact, Vorus' theory, Boundary Element Method, Linear strip theory

Modeling Reliability Growth In Accelerated Stress Testing, Jason K. Freels

Theses and Dissertations

Qualitative accelerated test methods improve system reliability by identifying and removing initial design flaws. However, schedule and cost constraints often preclude sufficient testing to generate a meaningful reliability estimate from the data obtained in these tests. In this dissertation a modified accelerated life test is proposed to assess the likelihood of attaining a reliability requirement based on tests of early system prototypes. Assuming each prototype contains an unknown number of independent competing failure modes whose respective times to occurrence are governed by a distinct Weibull law, the observed failure data from this qualitative test are shown to follow a poly-Weibull …

A Numerical Study Of High Temperature And High Velocity Gaseous Hydrogen Flow In A Cooling Channel Of A Ntr Core, Sajan B. Singh

University of New Orleans Theses and Dissertations

Two mathematical models (a one and a three-dimensional) were adopted to study, numerically, the thermal hydrodynamic behavior of flow inside a single cooling channel of a Nuclear Thermal Rocket (NTR) engine. The first model assumes the flow in the cooling channel to be one-dimensional, unsteady, compressible, turbulent, and subsonic. The working fluid (GH₂) is assumed to be compressible. The governing equations of the 1-D model are discretized using a second order accurate finite difference scheme. Also, a commercial CFD code is used to study the same problem. Numerical experiments, using both codes, simulated the flow and heat transfer …

Under-Sampled Reconstruction Techniques For Accelerated Magnetic Resonance Imaging, Mohammad H. Kayvanrad

Electronic Thesis and Dissertation Repository

Due to physical and biological constraints and requirements on the minimum resolution and SNR, the acquisition time is relatively long in magnetic resonance imaging (MRI). Consequently, a limited number of pulse sequences can be run in a clinical MRI session because of constraints on the total acquisition time due to patient comfort and cost considerations. Therefore, it is strongly desired to reduce the acquisition time without compromising the reconstruction quality. This thesis concerns under-sampled reconstruction techniques for acceleration of MRI acquisitions, i.e., parallel imaging and compressed sensing.

While compressed sensing MRI reconstructions are commonly regularized by penalizing the decimated wavelet …

Intraurban Variability Of Ambient Particulate Matter, Varun Yadav

All Theses and Dissertations (ETDs)

An understanding of spatial and temporal variability in ambient particulate matter: PM) is important for effective air quality management and for assessing potential exposure misclassification in epidemiological and exposure studies used to support health-based standards. Spatiotemporal variability of PM in urban areas can be influenced by many factors, such as local sources of primary PM; source locations and their emission profiles; topographic barriers; meteorological patterns; behavior of semi-volatile components; and measurement errors. Intraurban variability is often gauged by conducting measurements at a network of monitoring stations across the region of interest. While certain statistical metrics are commonly used and interpreted …

Predicting Voltage Abnormality Using Power System Dynamics, Nagendrakumar Beeravolu

University of New Orleans Theses and Dissertations

The purpose of this dissertation is to analyze dynamic behavior of a stressed power system and to correlate the dynamic responses to a near future system voltage abnormality. It is postulated that the dynamic response of a stressed power system in a short period of time-in seconds-contains sufficient information that will allow prediction of voltage abnormality in future time-in minutes. The PSSE dynamics simulator is used to study the dynamics of the IEEE 39 Bus equivalent test system. To correlate dynamic behavior to system voltage abnormality, this research utilizes two different pattern recognition methods one being algorithmic method known as …

Rocket Motor Diagnostics Using Tunable Diode Laser Spectroscopy For Chemically Non-Reacting Air/Water Vapor Mixture In Internal Flow, Wesley Carleton

University of New Orleans Theses and Dissertations

This research is for the implementation of non-intrusive measurement techniques in the study of high temperature pipe flow. A low pressure, laboratory scale hybrid rocket motor simulator was built to achieve high temperatures with various gases. A quartz test section was designed, built, and implemented into the existing test setup to accommodate the laser beam of the existing Tunable Diode Laser Absorption Spectrometer (TDLAS) system which was designed to observe water vapor. A super-heated water vapor injector was designed to obtain the desired water vapor concentrations. Flow characteristics were simultaneously recorded using the existing TDLAS system and the DAQ system …

Utilizing Economic And Environmental Data From The Desalination Industry As A Progressive Approach To Ocean Thermal Energy Conversion (Otec) Commercialization, Michael R. Eller

University of New Orleans Theses and Dissertations

Ocean Thermal Energy Conversion (OTEC) is a renewable energy technology that has to overcome several key challenges before achieving its ultimate goal of producing baseload power on a commercial scale. The economic challenge of deploying an OTEC plant remains the biggest barrier to implementation. Although small OTEC demonstration plants and recent advances in subsystem technologies have proven OTEC’s technical merits, the process still lacks the crucial operational data required to justify investments in large commercial OTEC plants on the order of 50-100 megawatts of net electrical power (MWe-net). A pre-commercial pilot plant on the order of 5-10 MWe-net is required …

Estimation, Decision And Applications To Target Tracking, Yu Liu

University of New Orleans Theses and Dissertations

This dissertation mainly consists of three parts. The first part proposes generalized linear minimum mean-square error (GLMMSE) estimation for nonlinear point estimation. The second part proposes a recursive joint decision and estimation (RJDE) algorithm for joint decision and estimation (JDE). The third part analyzes the performance of sequential probability ratio test (SPRT) when the log-likelihood ratios (LLR) are independent but not identically distributed.

The linear minimum mean-square error (LMMSE) estimation plays an important role in nonlinear estimation. It searches for the best estimator in the set of all estimators that are linear in the measurement. A GLMMSE estimation framework is …

A Study On The Integration Of A Novel Absorption Chiller Into A Microscale Combined Cooling, Heating, And Power (Micro-Cchp) System, Scott J. Richard

University of New Orleans Theses and Dissertations

This study explores the application of micro-CCHP systems that utilize a 30 kW gas microturbine and an absorption chiller. Engineering Equation Solver (EES) is used to model a novel single-effect and double-effect water-lithium bromide absorption chiller that integrates the heat recovery unit and cooling tower of a conventional CCHP system into the chiller’s design, reducing the cost and footprint of the system. The results of the EES model are used to perform heat and material balances for the micro-CCHP systems employing the novel integrated chillers, and energy budgets for these systems are developed. While the thermal performance of existing CCHP …

Buckling, Postbuckling And Imperfection Sensitivity Analysis Of Different Type Of Cylindrical Shells By Hui's Postbuckling Method, Hailan Xu

University of New Orleans Theses and Dissertations

Hui and Chen (1986) were the first to show that the well-known Koiter’s General Theory of Elastic Stability of 1945 can be significantly improved by evaluating the postbuckling b coefficient at the actual applied load, rather than at the classical buckling load. Such improvement method was demonstrated to be (1) very simple to apply with no tedious algebra, (2) significant reduction in imperfection sensitivity and (3) although it is still asymptotically valid, there exists a significant extension of the range of validity involving larger imperfection amplitudes. Strictly speaking, Koiter’s theory of 1945 is valid only for vanishingly small imperfection amplitudes. …

Battery Energy Storage Systems To Mitigate The Variability Of Photovoltaic Power Generation, Heath Alan Gurganus

Dissertations and Theses

Methods of generating renewable energy such as through solar photovoltaic (PV) cells and wind turbines offer great promise in terms of a reduced carbon footprint and overall impact on the environment. However, these methods also share the attribute of being highly stochastic, meaning they are variable in such a way that is difficult to forecast with sufficient accuracy. While solar power currently constitutes a small amount of generating potential in most regions, the cost of photovoltaics continues to decline and a trend has emerged to build larger PV plants than was once feasible. This has brought the matter of increased …

A Dynamic Optimization Framework With Model Predictive Control Elements For Long Term Planning Of Capacity Investments In A District Energy System, Jose Luis Mojica Velazquez

Theses and Dissertations

The capacity expansion of a district heating system is studied with the objective of evaluating the investment decision timing and type of capacity expansion. District energy is an energy generation system that provides energy, such as heat and electricity, generated at central locations and distributed to the surrounding area. The study develops an optimization framework to find the optimal investment schedule over a 30 year horizon with the options of investing in traditional heating sources (boilers) or a next-generation combined heat and power (CHP) plant that can provide heat and electricity. In district energy systems, the investment decision on the …

Water Vapor Movement In Freezing Aggregate Base Materials, Maile Anne Rogers

Theses and Dissertations

The objectives of this research were to 1) measure the extent to which water vapor movement results in water accumulation in freezing base materials; 2) evaluate the effect of soil stabilization on water vapor movement in freezing base materials; 3) determine if the corresponding changes in water content are sufficient to cause frost heave during winter; 4) determine if the corresponding changes in water content are sufficient to cause reductions in stiffness during spring; 5) evaluate relationships between selected material properties, freezing conditions, and the occurrence and impact of water vapor movement; and 6) numerically simulate heat and water movement …

Performance Assessment Of Wireless Two Way Relay Channel Systems, Siramack Ghadimi

Electronic Thesis and Dissertation Repository

The objective of this thesis is theoretical investigations and numerical simulations of Two Way Relay Channel (TWRC) systems, particularly in an impulsive noise environment. Special attention is given to investigation of a TWRC system based on polarized antennas. The first part of the thesis focuses on modelling of impulsive noise and the effect of impulsive noise on TWRC systems. The study was conducted by simulating the wireless TWRC models in the presence of impulsive noise. The bit error probability performance of the channel data was compared and at last their results are shown by graphs. The study has been further …

A Kinetic Study Of Aqueous Calcium Carbonate, Derek Daniel Harris

Theses and Dissertations

Amorphous calcium carbonate (ACC) precipitation is modeled using particle nucleation, growth, and aggregation. The particles are tracked in terms of their radial size and particle density using direct quadrature method of moments (DQMOM). Four separate nucleation models are implemented and are compared to experimental data. In discord with a recent study, it is shown that classical nucleation, coupled with equilibrium chemistry, is in good agreement with experimental data. Novel nucleation mechanisms are presented which fit the experimental data with slightly greater accuracy. Using equilibrium chemistry it is shown that the equilibrium value of ACC is pKeq = 7.74 at 24C, …

Developing Guidelines For Including Mobility-Based Performance Specifications In Highway Construction Contracts, Shawn J. Larson

Theses and Dissertations

Construction zones can greatly affect the traffic flow on roadways, especially when lane closures are required. Traditionally, the Utah Department of Transportation (UDOT) has used traffic management specifications that only allow lane closures and road work to be done during predetermined hours or specifications that require a certain number of lanes to be open at all times. Recently, mobility-based work-zone traffic flow maintenance has been considered. This method requires continuous monitoring of mobility-based performance data and a mechanism to send alerts to the contractors when the mobility data does not meet the standards set by the specifications. UDOT recently tested …

Frost Susceptibility Of Base Materials Treated With Asphalt Emulsion, Noelle Anderson

Theses and Dissertations

The objective of this research was to investigate emulsion-treated base (ETB) frost susceptibility in terms of both freeze-thaw cycling and frost heave. The research performed in this study involved laboratory testing of ETB materials sampled from both the Redwood Road and 7800 South reconstruction projects in northern Utah. The effects of freeze-thaw cycling were evaluated by comparing the stiffness and strength of tested specimens to the same properties of control specimens not subjected to freeze-thaw cycling. Frost heave testing enabled evaluation of the effects of emulsion content and degree of curing on the volumetric stability of ETB materials during sustained …

Condition Assessment Of Decommissioned Bridge Decks Treated With Waterproofing Membranes And Asphalt Overlays, Eric Scott Sumsion

Theses and Dissertations

The objective of this research was to assess the condition of four decommissioned bridge decks treated with waterproofing membranes and asphalt overlays following the completion of their service lives. Large samples were cut from each of the bridge decks immediately prior to demolition and taken to the Brigham Young University Highway Materials Laboratory, where extensive sampling and testing was performed. Methods used to evaluate the condition of the bridge deck samples included visual inspection, hammer sounding, Schmidt rebound hammer testing, resistivity testing, half-cell potential testing, linear polarization testing, cover depth measurement, and chloride concentration measurement. The samples were removed from …

Disaster Data Management In Cloud Environments, Katarina Grolinger

Electronic Thesis and Dissertation Repository

Facilitating decision-making in a vital discipline such as disaster management requires information gathering, sharing, and integration on a global scale and across governments, industries, communities, and academia. A large quantity of immensely heterogeneous disaster-related data is available; however, current data management solutions offer few or no integration capabilities and limited potential for collaboration. Moreover, recent advances in cloud computing, Big Data, and NoSQL have opened the door for new solutions in disaster data management.

In this thesis, a Knowledge as a Service (KaaS) framework is proposed for disaster cloud data management (Disaster-CDM) with the objectives of 1) facilitating information gathering …

Modified Sodium Diuranate Process For The Recovery Of Uranium From Uranium Hexafluoride Transport Cylinder Wash Solution, Austin Dean Meredith

Theses and Dissertations

Uranium hexafluoride (UF₆) containment cylinders must be emptied and washed every five years in order to undergo recertification, according to ANSI standards. During the emptying of the UF₆ from the cylinders, a thin residue, or heel, of UF₆ is left behind. This heel must be removed in order for recertification to take place.

To remove it, the inside of the containment cylinder is washed with acid and the resulting solution generally contains three or four kilograms of uranium. Thus, before the liquid solution can be disposed of, the uranium must be separated. A modified sodium diuranate …

Fundamental Experimental Studies In Scaling, Blast Mitigation And Material Processing, Xing Zhao

Theses and Dissertations

In this work, two separate research efforts are discussed. They include experimental studies in (1) Scaling and Blast Mitigation and (2) Scaling in Friction Stir Extrusion. In both studies, the primary experimental measurement method is three-dimensional digital image correlation (3D-DIC), a non-contacting full-field measurement method that is applicable for both high-rate loading and quasi-static loading conditions.

Scaling and Blast Mitigation Studies:

A series of properly scaled structures was subjected to buried blast loading conditions via detonation of a small explosive buried in saturated sand. Using high speed stereo-vision systems to record the deformations of selected regions on the upper surface …

On The Interoperability Of Programming Languages Based On The Fork-Join Parallelism Model, Sushek Shekar

Electronic Thesis and Dissertation Repository

This thesis describes the implementation of MetaFork, a meta-language for concurrency platforms targeting multicore architectures. First of all, MetaFork is a multithreaded language based on the fork-join model of concurrency: it allows the programmer to express parallel algorithms assuming that tasks are dynamically scheduled at run-time. While MetaFork makes no assumption about the run-time system, it formally defines the serial C-elision of a MetaFork program. In addition, MetaFork is a suite of source-to-source compilers permitting the automatic translation of multithreaded programs between programming languages based on the fork-join model. Currently, this compilation framework supports the OpenMP and CilkPlus concurrency platforms. …

Liquid Core Waveguide Sensors With Single And Multi-Spot Excitation, Lynnell Uilani Wai Yee Zempoaltecatl

Theses and Dissertations

Using silicon based microfabrication and materials, a photonic platform, capable of single bioparticle analysis, has been developed. This platform combines liquid and hollow core waveguides on the micron-scale (5 µm x 12 µm) to isolate femtoliter sized sample volumes. Fluorescence excitation and signals in the visible range are directed into and out of the sample volume at an orthogonal angle to maximize signal-to-noise. In order to guide light in a low-index material antiresonant reflecting optical waveguides (ARROWs) were incorporated into the platform. This thesis reveals the development path of these structures over several device generations including innovations in material, geometries, …

Dynamic Thermal And Power Management: From Computers To Buildings, Yong Fu

McKelvey School of Engineering Theses & Dissertations

Thermal and power management have become increasingly important for both computing and physical systems. Computing systems from real-time embedded systems to data centers require effective thermal and power management to prevent overheating and save energy. In the mean time, as a major consumer of energy buildings face challenges to reduce the energy consumption for air conditioning while maintaining comfort of occupants. In this dissertation we investigate dynamic thermal and power management for computer systems and buildings. (1) We present thermal control under utilization bound (TCUB), a novel control-theoretic thermal management algorithm designed for single core real-time embedded systems. A salient …