Digital Commons Network^™

Melt Blown Poly(Lactic Acid) For Application As A Tissue Engineering Scaffold, William Horst Gazzola

Masters Theses

Poly(lactic acid) (PLA) was melt blown (MB) under varying processing conditions to create webs with micro and nano-architecture. Processing parameters varied were primary air flow rate and collector distance. In total, twenty-one webs were produced and the physical properties of the webs were investigated including, mean fiber diameter and fiber diameter distribution, mean pore diameter and pore size distribution, web thickness, degree of crystallinity, tensile modulus and degradation rate. Four webs, two with micro and two with nano-architecture, thought suitable for use as tissue engineering scaffolds were selected for seeding with A375 human malignant melanoma cells. Cell culture was conducted …

Engineering Single-Molecule, Nanoscale, And Microscale Bio-Functional Materials Via Click Chemistry, Michael Daniele

All Dissertations

To expand the design envelope and supplement the materials library available to biomaterials scientists, the copper(I)-catalyzed azide-alkyne cycloaddition (CuCAAC) was explored as a route to design, synthesize and characterize bio-functional small-molecules, nanoparticles, and microfibers. In each engineered system, the use of click chemistry provided facile, bio-orthogonal control for materials synthesis; moreover, the results provided a methodology and more complete, fundamental understanding of the use of click chemistry as a tool for the synergy of biotechnology, polymer and materials science. Fluorophores with well-defined photophysical characteristics (ranging from UV to NIR fluorescence) were used as building blocks for small-molecule, fluorescent biosensors. Fluorophores …

Probing And Controlling Fluid Rheology At Microscale With Magnetic Nanorods, Alexander Tokarev

All Dissertations

This Dissertation is focused on the development of new methods for characterization and control of fluid rheology using magnetic nanorods. This Dissertation consists of five chapters. In the first chapter, we review current microrheologial methods and develop a Magnetic Rotational Spectroscopy (MRS) model describing nanorod response to a rotating magnetic field. Using numerical modeling, we analyze the effects of materials parameters of nanorods and fluids on the MRS characteristic features. The model is designed for a specific experimental protocol. We introduce and examine physical parameters which can be measured experimentally. The model allows identification of MRS features enabling the calculation …

The Mitigation Of Eutrophication Using Microporous Polymer Membranes To Control Algae Growth, Christopher R. Riley

Materials Engineering

A system was designed to mitigate the accelerated process of anthropogenic eutrophication. This system aimed to contain Chlorella Vulgaris microalgae cells within an enclosed polymer membrane pouch while allowing for water and nutrients to diffuse through the pouch. As a test model, a 10 gallon aquarium was partitioned into three sections using polycarbonate membranes with 1 micron pore diameters. Each section was then gradually filled with a deionized water and Bristol solution recommended for microalgae growth. Phosphate and nitrate were added to Section A of the aquarium and allowed to diffuse throughout the tank. A water pump was used to …

Multipolymer Interactions In Bulk Heterojunction Photovoltaic Devices, Grant Olson

Physics

Multipolymer photovoltaics, single layer devices made up of multiple photoactive polymers, can create organic photovoltaics (OPVs) with a wider spectral response than single polymer systems without the difficult fabrication of a tandem. Our group has successfully created multipolymer solar devices with 2% power conversion efficiency. We have analyzed the optical and electrical properties of these devices, and found that it may be possible for polymers to assist each other with charge extraction, though combining polymers disrupts single polymer crystallinity.

Investigation Of The Fracture Phenomena During The Milling Process Of Inorganic Particulates And Brittle Fracture Of Polymer Composites Using Fractal Theory, Zheng Qian

Dissertations

This dissertation investigates the applicability and usefulness of applying Fractal mathematics and to the fracture of brittle particulates in Fluid Energy Mill devices, and in particular quantifying the resulting power law particle size distributions, examining the Surface Fractal Dimension of milled particulates, and relating the Izod Impact Strength values of composites of polypropylene and Calcium carbonate particulates which are large un-milled, small milled, as well as small and produced by the simultaneous milling and coating with nano-silica to the Surface Fractal Dimension of the impact fracture surfaces.

First, the dissertation examines the behavior of un-coated and micron-sized wax pre-coated particulates …

Tuning The Properties Of Metal-Ligand Complexes To Modify The Properties Of Supramolecular Materials, Ian Henderson

Open Access Dissertations

Supramolecular chemistry is the study of discreet molecules assembled into more complex structures though non-covalent interactions such as host-guest effects, pi-pi stacking, electrostatic effects, hydrogen bonding, and metal-ligand interactions. Using these interactions, complex hierarchical assembles can be created from relatively simple precursors.

Of the supramolecular interactions listed above, metal-ligand interactions are of particular interest due to the wide possible properties which they present. Factors such as the denticity, polarizability, steric hindrance, ligand structure, and the metal used (among others) contribute to a dramatic range in the physical properties of the metal-ligand complexes. Particularly affected by these factors are the kinetic …

Enhanced Mechanical Performance Of Low Dielectric Constant Thin Films Synthesized In Supercritical Co2, And Sans Studies Of Microemulsions Induced Or Destabilized By Compressed Co2, Alvin Horatio Romang

Open Access Dissertations

Block copolymer (BCP) phase segregation and self-assembly into two or more distinct domains are primarily dictated by two parameters: the block volume fraction, f, and the product of the segment-segment interaction parameter and the length of polymer chain, XN. The volume fraction determines a block copolymer's phase segregated morphology, whereas XN dictates its overall segregation strength, or phase stability. In order to achieve smaller domain sizes, the interaction parameter must be increased to compensate for the decrease in chain length. In the melt, PEO-b-PPO-b-PEO (Pluronic) triblock copolymer surfactants do not phase segregate primarily due to their low molecular weights …

Electrospun Polycaprolactone Nanofiber Scaffolds For Tissue Engineering, Andreas Haukas

Graduate Theses and Dissertations

Stem cell and tissue engineering offer us with a unique opportunity to research and develop new therapies for treating various diseases that are otherwise incurable using traditional medicines. However, development of these new therapies replies upon the establishment of in vitro cell culture and differentiation systems that mimic in vivo microenvironments required for cell-cell and cell-ECM interaction. The development of these cell culture systems depends upon the identification of appropriate biomaterials and cell sources. Biomaterials should be carefully selected and fabricated into scaffolds for supporting cell growth and differentiation. In this study, we explored the fabrication of 3D electrospun nanofiber …

Turbidity Removal Efficiency And Toxicity Issues Associated With The Chitosan-Based Dual Bio-Polymer Systems, Rylee Hernandez

Electronic Theses and Dissertations

Stormwater runoff can be a great concern in the State of Florida due to the impact the quality of the runoff water can have on the natural water bodies. Stormwater runoff can carry pollutants and sediments which can cause both physical and biological risks in an aquatic ecosystem such as a lake, river, or pond. Polymers, namely the chitosan-based dual polymer system, can be used remove the sediment from this runoff to ensure the safety of the state’s water bodies. Three soils are used in this testing: AASTO soil classifications A-3(sandy soil) and A-2- 4 (silty-sand), and a soil with …

Macroencapsulation Of Phase Change Materials For Thermal Energy Storage, Swetha Pendyala

USF Tampa Graduate Theses and Dissertations

The use of a latent heat storage system using phase change materials (PCMs) is an effective way of storing thermal energy. Latent heat storage enables high-energy storage density which reduces the footprint of the system and the cost. However, PCMs have very low thermal conductivities making them unsuitable for large-scale use without enhancing the effective thermal conductivity. In order to address, the low thermal conductivity of the PCMs, macroencapsulation of PCMs has been adopted as an effective technique. The macroencapsulation not only provides a self-supporting structure of PCM and separates the PCM from thermal fluids but also enhances the heat …

Novel Fluorous Hybrid Surface Modification Characterized By Wetting Dynamics, Morphology And Nanomechanics, Sithara Nair

Theses and Dissertations

The surface response of a polymer substrate to external stimuli such as initial wetting is controlled by the outermost molecular layer. Thus, changes on the nanoscale may be engaged to control macroscale wetting behavior. Our work has predominantly focused on surface modification of conventional polyurethane coatings (HMDI-BD-PTMO). Studies on network constrained phase separation and facile polydimethylsiloxane surface functionalization led to the discovery of a simpler one-step and more general approach to functional polymer surfaces that we have designated as “Bottle-Brush Nanoglass” (BB-NG) after the two principle components: (a) a polyoxetane soft block “spine” with side chain “A” bristles and triethoxysilyl …

Programming And Healing Temperature Effects On The Efficiency Of Confined Self-Healing Polymers, Yves Quentin Yougoubare

LSU Master's Theses

Shape memory polymers are smart materials capable of fixing a temporary shape and returning to their initial shape in response to an external stimulus. Since the discovery and acknowledgment of their importance in 1960s, shape memory polymers have been the subject of tremendous and continuous attention. In a previous study conducted on a biomimetic shape memory polymer (SMP), the ability of a self-healing composite to heal, and to repair and restore structural-length scale damage using a close-then-heal (CTH) self-healing mechanism was examined and validated. The present study is purposed with investigation of the effects on healing efficiencies of the variation …