Digital Commons Network^™

Investing In Maine Research Infrastructure: Sustainable Forest Bioproducts, Michael Eckardt, Stephen Shaler, Hemant P. Pendse, Adriaan R. P. Van Heiningen, Robert G. Wagner

University of Maine Office of Research Administration: Grant Reports

The University of Maine, the University of Southern Maine, several baccalaureate institutions in the state, along with other federal, state and local public, private, and non-profit institutions will collaborate to create the Forest Bioproducts Research Institute (FBRI) at the University of Maine. The vision of the FBRI is to advance understanding about the scientific underpinnings, system behavior, and policy implications for the production of forest-based bioproducts that meet societal needs for materials, chemicals, and fuels in an economically and ecologically sustainable manner.

The research plans Integrate three themes. They are (1) forest sustainability modeling of life cycle assessment, (2) integrated …

Electrical Impedance Imaging Of Corrosion On A Partially Accessible 2-Dimensional Region, Court Hoang, Katherine Osenbach

Mathematical Sciences Technical Reports (MSTR)

In this paper we examine the inverse problem of determining the amount of corrosion on an inaccessible surface of a two-dimensional region. Using numerical methods, we develop an algorithm for approximating corrosion profile using measurements of electrical potential along the accessible portion of the region. We also evaluate the effect of error on the problem, address the issue of ill-posedness, and develop a method of regularization to correct for this error. An examination of solution uniqueness is also presented.

Investigating Solutions To Wind Washing Issues In 2-Story Florida Homes; Phase 1, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

Wind washing has been identified as a potentially significant issue regarding energy, demand, comfort, and humidity in some two-story Florida homes. In its most common configuration, wind washing occurs when attic spaces over first-floor portions of the home abut the second story, and the floor cavity of the second story is open to that attic space. Wind blowing into attic vents can push hot attic air into the inter-story floor cavity, bypassing the typical thermal boundaries of the building and introducing considerable heat into the house. Wind washing can also occur when there is little or no attic involved, where …

Method Of Transferring Strained Semiconductor Structure, Michael Nastasi

Department of Mechanical and Materials Engineering: Faculty Publications

The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. An interface that includes the contaminants if formed in between the deposited layer and the substrate. Hydrogen atoms are introduced into the structure and allowed to diffuse to the interface. Afterward, the deposited multilayer structure is bonded to a second substrate and is separated away at the interface, which results in transferring a multilayer structure from one substrate at least one strained semiconductor layer and at least one strain-induced seed layer. The strain-induced seed layer can be …

Structural Identification Using A Low-Cost Search Method, James W. Fonda, Steve Eugene Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

An easily implementable and trainable damage detection method is proposed and implemented for a simple truss structure. The approach uses the iterative search identification method and is compatible with low-cost and low-power microcontroller hardware. This method employs pattern matching for a data set from a strain sensor array and predicts location (truss member) and severity (member cross sectional area) of damage. As a health monitoring approach, the method is not as robust or rigorous as more complex methods. However, it has modest processing requirements and can handle noisy signals. The work presents an algorithm applied to a truss structure, the …

Preparation And Hydrogen Absorption/Desorption Of Nanoporous Palladium Thin Films, Wen-Chung Li, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Nanoporous Pd (np-Pd) was prepared by co-sputtering Pd-Ni alloy films onto Si substrates, followed by chemical dealloying with sulfuric acid. X-ray diffractometry and chemical analysis were used to track the extent of dealloying. The np-Pd structure was changed from particle-like to sponge-like by diluting the sulfuric acid etchant. Using suitable precursor alloy composition and dealloying conditions, np-Pd films were prepared with uniform and open sponge-like structures, with interconnected ligaments and no cracks, yielding a large amount of surface area for reactions with hydrogen. Np-Pd films exhibited shorter response time for hydrogen absorption/desorption than dense Pd films, showing promise for hydrogen …

The Antimicrobial Triclocarban Stimulates Embryo Production In The Freshwater Mudsnail Potamopyrgus Antipodarum, Ben D. Giudice, Thomas M. Young

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Recent research has indicated that the antimicrobial chemical triclocarban (TCC) represents a new type of endocrine disruptor, amplifying the transcriptional activity of steroid hormones and their receptors while itself exhibiting little affinity for these receptors. The effects of TCC were studied in the freshwater mudsnail Potamopyrgus antipodarum. Specimens were exposed to concentrations ranging from 0.05 to 10.5 mg/L dissolved TCC and were removed and dissected, and embryos contained within the brood pouch were counted and classified as shelled or unshelled after two and four weeks of exposure. After four weeks, environmentally relevant TCC concentrations of 1.6 to 10.5 mg/L resulted …

Thermal Conduction In Molecular Materials Using Coarse Grain Dynamics: Role Of Mass Diffusion And Quantum Corrections For Molecular Dynamics Simulations, Ya Zhou, Alejandro Strachan

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

We use a mesodynamical method, denoted dynamics with implicit degrees of freedom DID, to characterize thermal transport in a model molecular crystal below and above its melting temperature. DID represents groups of atoms molecules in this case using mesoparticles and the thermal role of the intramolecular degrees of freedom DoFs are described implicitly using their specific heat. We focus on the role of these intramolecular DoFs on thermal transport. We find that thermal conductivity is independent of intramolecular specific heat for solid samples and a linear relationship between the two quantities in liquid samples with the coefficient of proportionality being …

Alan Turing Se Fraye Un Chemin Jusqu'À La Place De L'Ordinateur, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

A brief statement on the significance, impact and future developments related to the work of computer pioneer Alan Turing, in conjunction with Turing Day, held to commemorate his 90th birthday.

*The article is in French

Underwood, John Cox, 1840-1913 (Sc 2125), Manuscripts & Folklife Archives

MSS Finding Aids

Finding aid and scan (Click on "Additional Files" below) for Manuscripts Small Collection 2125. Letter, 14 August 1876, from John Cox Underwood, Bowling Green, Kentucky to Thomas E. Moss, Kentucky State Attorney General, Frankfort, Kentucky, in which he relates information about the condition of the locks and dams on the Green and Barren Rivers.

Graduate Education In Research Ethics For Scientists And Engineers: Final Report, Jorge Ferrer-Negron, William Frey, Efrain O'Neill-Carrillo, Didier Valdes, Carlos Rios-Valazquez

Ethics in Science and Engineering National Clearinghouse

No abstract provided.

Spectroscopicellipsometer And Polarmeter Systemis, John A. Woollam, Blaine D. Johs, Craig M. Herzinger, Ping He, Martin M. Liphardt, Galen L. Pfeiffer

Department of Electrical and Computer Engineering: Faculty Publications

A rotating compensator spectroscopic ellipsometer or polarimeter system having a source of a polychromatic beam of electromagnetic radiation, a polarizer, a stage for Supporting a material system, an analyzer, a dispersive optics and a detector system which comprises a multiplicity of detector elements, the system being functionally present in an environmental control chamber and therefore suitable for application in wide spectral range, (for example, 130-1700 nm). Preferred compensator design involves a Substantially achromatic multiple element compensator systems wherein multiple total internal reflections enter retardance into an entered beam of electromagnetic radiation, and the elements thereof are oriented to minimize changes …

Simulation Model To Investigate Flexible Workload Management For Healthcare And Servicescape Environment, Michael Thorwarth, Paul Harper, Amr Arisha

Conference papers

High demand and poor staffing conditions cause avoidable pressure and stress among healthcare personnel which results in burnout symptoms and unplanned absenteeism which are hidden cost drivers. The work environment within an emergency department is commonly arranged in a flexible workload which is highly dynamic and complex for the outside observer. Using detailed simulation modeling within structured modeling methods, a comprehensive model to characterize the nurses' time utilization in such flexible dynamic workload environment was investigated. The results have been used to derive a generalized analytic expression that describes certain settings that lead to an instable queuing system with serious …

Applied Climate-Change Analysis: The Climate Wizard Tool, Evan H. Girvetz, Chris Zganjar, George T. Raber, Edwin P. Maurer, Peter Kareiva, Joshua J. Lawler

Civil, Environmental and Sustainable Engineering

Background: Although the message of ‘‘global climate change’’ is catalyzing international action, it is local and regional changes that directly affect people and ecosystems and are of immediate concern to scientists, managers, and policy makers. A major barrier preventing informed climate-change adaptation planning is the difficulty accessing, analyzing, and interpreting climate-change information. To address this problem, we developed a powerful, yet easy to use, web-based tool called Climate Wizard (http://ClimateWizard.org) that provides non-climate specialists with simple analyses and innovative graphical depictions for conveying how climate has and is projected to change within specific geographic areas throughout the world. Methodology/Principal Findings: …

Self-Organized Nanolayers Of Organosilane Molecules, Ocelio V. Lima

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

There is a high degree of interest in organic thin films for lightweight, low power, rugged and flexible electronics. Conjugated organic molecules with polycyclic rings are being considered a major enabler of such applications. Due to a surface tension mismatch between the organic molecule with the inorganic support (mainly silicon oxides), molecular packing inside these thin films is often disordered, which suppresses the device performance. There are major efforts focused on modifying the bulk properties, for instance, maximizing orbital overlaps in the solid state, little attention was paid to receive long-range ordered thin films. A novel approach to afford conjugated …

Enhance Diamond Coating Adhesion By Oriented Interlayer Microcracking, Habio Guo, Xingcheng Xiao, Yue Qi, Zhi-Hui Xu, Xiaodong Li

Faculty Publications

In this paper, we report a microcrack toughening mechanism for enhancing the adhesion of diamondcoating. The oriented microcracks were formed within the TiC interlayer to dissipate strain energy and accommodate deformation via the crack opening-closing mechanism, thus enhancing the coating/substrate interfacial toughness. The delamination of diamondcoating was effectively prevented when the parallel microcracks were confined within the interlayer and arrested at interfaces of coating/interlayer/substrate. Density functional theory calculations revealed that the highly anisotropicfracture strength of the TiC phase energetically favors crack initiation and propagation along (100) planes only, which are 54.7° away from the interface. These microcracks are constrained inside …

Atomic Force Microscopy Of Dna Self-Assembled Nanostructures For Device Applications, Hieu Bui, Craig Onodera, Bernard Yurke, Elton Graugnard, Wan Kuang, Jeunghoon Lee, William B. Knowlton, William L. Hughes

Electrical and Computer Engineering Faculty Publications and Presentations

DNA nanotechnology, which relies on Watson-Crick hybridization, is a versatile selfassembly process whereby a variety of complex nanostructures can be fabricated with sublithographic features.[1] Adopting this technology, 1012 identical devices can be synthesized to have hundreds of components with 1nm resolution. Example nanostructures include: 1) DNA motifs [2], 2) two-dimensional DNA crystals [3], and DNA origami [4]. Currently, this technology is being adopted towards electronic, optical, and opto-electronic devices.[5]

Graphene On Pt(111): Growth And Substrate Interaction, Peter Sutter, Jerzy T. Sadowski, Eli Sutter

Department of Electrical and Computer Engineering: Faculty Publications

In situ low-energy electron microscopy (LEEM) of graphene growth combined with measurements of the graphene structure and electronic band structure has been used to study graphene on Pt (111). Growth by carbon segregation produces macroscopic monolayer graphene domains extending continuously across Pt (111) substrate steps and bounded by strongly faceted edges. LEEM during cooling from the growth temperature shows the propagation of wrinkles in the graphene sheet, driven by thermal stress. The lattice mismatch between graphene and Pt (111) is accommodated by moiré structures with a large number of different rotational variants, without a clear preference for a particular interface …

Egoviz – A Mobile Based Spatial Interaction System, Keith Gardiner, Junjun Yin, James Carswell

Articles

This paper describes research carried out in the area of mobile spatial interaction and the development of a mobile (i.e. on-device) version of a simulated web-based 2D directional query processor. The TellMe application integrates location (from GPS, GSM, WiFi) and orientation (from digital compass/tilt sensors) sensing technologies into an enhanced spatial query processing module capable of exploiting a mobile device’s position and orientation for querying real-world 3D spatial datasets. This paper outlines the technique used to combine these technologies and the architecture needed to deploy them on a sensor enabled smartphone (i.e. Nokia 6210 Navigator). With all these sensor technologies …

East Bay Energy Consortium Meeting Minutes, December 7, 2009, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

Automatic Exposure Control And Estimation Of Effective System Noise In Diffuse Fluorescence Tomography, Dax L. Kepshire, Hamid Dehghani, Frederic Leblond, Brian W. Pogue

Dartmouth Scholarship

A diffuse fluorescence tomography system, based upon time-correlated single photon counting, is presented with an automated algorithm to allow dynamic range variation through exposure control. This automated exposure control allows the upper and lower detection levels of fluorophore to be extended by an order of magnitude beyond the previously published performance and benefits in a slight decrease in system effective noise. The effective noise level is used as a metric to characterize the system performance, integrating both model-mismatch and calibration bias errors into a single parameter. This effective error is near 7% of the reconstructed fluorescent yield value, when imaging …

Optical Properties Of Semiconducting Boron Carbide For Neutron Detection Applications, Ravi B. Billa

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Solid state neutron detection devices based on semiconducting boron carbide have the potential for nearly ideal neutron detection effciency for thermal neutrons. The present work is focused on characterizing optical properties of this semiconducting boron carbide material as a step in further development of the material for neutron detection and other applications.

Semiconducting boron carbide films were grown on silicon substrates using plasma enhanced chemical vapor deposition and their optical properties were characterized using variable angle spectroscopic ellipsometry over a wide spectral range, from mid-infrared to vacuum-ultraviolet wavelengths. The effects of deposition substrate temperature and of post-deposition heat treatments on …

Fabrication Methods For Creating Flexible Polymer Substrate Sensor Tags, Jack L. Skinner, Harvey Ho

Mechanical Engineering

The authors describe the design, fabrication, and testing of a passive wireless sensor platform utilizing low-cost commercial surface acoustic wave filters and sensors. Polyimide and polyethylene terephthalate sheets are used as substrates to create a flexible sensor tag that can be applied to curved surfaces. A microfabricated antenna is integrated on the substrate in order to create a compact form factor. The sensor tags are fabricated using 315 MHz surface acoustic wave filters and photodiodes and tested with the aid of a fiber-coupled tungsten lamp. Microwave energy transmitted from a network analyzer is used to interrogate the sensor tag. Due …

Wim Based Live Load Model For Bridge Reliability, Marek Kozikowski

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Development of a valid live load model is essential for assessment of serviceability and safety of highway bridges. The current HL-93 load model is based on the Ontario truck measurements performed in 1975. Since that time truck loads have changed significantly. Therefore, the goal of this study is to analyze 2005-2007 Weigh-In-Motion (WIM) data and develop a new statistical live load model.

The analyzed WIM data includes 47,000,000 records obtained from different states. A special program was developed to calculate the maximum live load effect. Comparison of the old and new truck data showed that on average Ontario trucks are …

Development Of The Mask Scentometer, A Comparison Of Ambient Odor Assessment Methods, And Their Application In Ground Truthing Atmospheric Dispersion Models, Christopher G. Henry

Department of Biological Systems Engineering: Dissertations and Theses

This dissertation is organized as four stand-alone papers. Paper No. 1 describes the development of the Mask Scentometer and reports dilution ratios measured during use by twelve different people. Dilution ratios at the Mask Scentometer’s five dilution-to-threshold (D/T) settings were found to be 0.35, 1, 2, 4.5 and 18. In Paper No.’s 2 and 4, ambient odor assessment methods were compared in both controlled laboratory conditions and in the field. Laboratory analysis of ambient air samples using dynamic triangular forced-choice olfactometry (DTFCO) did not correlate well with any of the ambient odor assessment methods. Average intensity-predicted D/T was roughly five …

Ceas E-News 12.03.2009, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

SWE workshop offers Girl Scouts an introduction to engineering

Biological Sequence Simulation For Testing Complex Evolutionary Hypotheses: Indel-Seq-Gen Version 2.0, Cory L. Strope

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Reconstructing the evolutionary history of biological sequences will provide a better understanding of mechanisms of sequence divergence and functional evolution. Long-term sequence evolution includes not only substitutions of residues but also more dynamic changes such as insertion, deletion, and long-range rearrangements. Such dynamic changes make reconstructing sequence evolution history difficult and affect the accuracy of molecular evolutionary methods, such as multiple sequence alignments (MSAs) and phylogenetic methods. In order to test the accuracy of these methods, benchmark datasets are required. However, currently available benchmark datasets have limitations in their sizes and evolutionary histories of the included sequences are unknown. These …

Quality-Driven Cross Layer Design For Multimedia Security Over Resource Constrained Wireless Sensor Networks, Wei Wang

Computer and Electronics Engineering: Dissertations, Theses, and Student Research

The strong need for security guarantee, e.g., integrity and authenticity, as well as privacy and confidentiality in wireless multimedia services has driven the development of an emerging research area in low cost Wireless Multimedia Sensor Networks (WMSNs). Unfortunately, those conventional encryption and authentication techniques cannot be applied directly to WMSNs due to inborn challenges such as extremely limited energy, computing and bandwidth resources. This dissertation provides a quality-driven security design and resource allocation framework for WMSNs. The contribution of this dissertation bridges the inter-disciplinary research gap between high layer multimedia signal processing and low layer computer networking. It formulates the …

College Of Engineering Senior Design Competition Fall 2009, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Each student in his or her senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. The senior design project encourages the student to use everything learned in the engineering program to create a practical, real-world solution to an engineering challenge.

A highlight of the year-long senior design project is the senior design competition. This competition, which usually takes place the week before finals each semester, helps focus the senior students on increasing the quality and potential for commercial application for their design projects.

Judges from local industry evaluate the projects on innovation, commercial …

Screw Connections Subject To Tension Pull-Out And Shear Forces, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.